BOMBOS interface "warning" message after changes saved in the BOM.

Hello,
We our client is facing an issue, regarding BOM change / Modification in CS02.
After any modifications saved in the BOM (transaction CS02), in SLG1 transaction system gives u201Cwarning messageu201D as given below.
1.     Entry already exists in the work list
For components, system is giving following message.
2. Item material PPA_FORM_NU001 (Material number) is not assigned to a specification
We found one note for this u2013 u201Csapnote_0000893616_BOMBOS_Specification not foundu201D, this note is already applied in the program by SAP at 2005.
Because of this note, program creates the message in SLG1.
We also found that, in the IMG customization >>>
Environment Health & Safety > Product Safety > Bill Of Material Transfer > Specify Environment parameter & condition for the parameter u201CBOMBOS_WL_DIALOGu201D parameter value is u201CXu201D. If we remove this value, then system gives error message in the SLG1.
We want to know,
1.     Why we have such entries in SLG1?
2.     What is the goal of this standard BOMBOS interface?
3.     What is the impact of this warning message in the process of the transaction?
4.     To solve this, is there any solution?
Please confirm us.
Thanks in advance.
Edited by: Hemant Baviskar on Apr 27, 2009 11:25 AM
Hello, Can any body help me on this?
Thanks

Hello,
To rectify this issue, please refer the SAP Note - sapnote_0000683420 and make the changes accordingly.
Thanks
Best Regards

Similar Messages

  • Sent messages aren't saved in the Sent Items folder in Outlook 2013

    When we send a message in Outlook 2013, a copy of the message should be saved in the Sent Items folder by default. If Outlook doesn’t save a copy of the sent message, it may be caused by any one of the following
    reasons:
    The “Save copies of messages in the Sent Items folder”
    option in Outlook is disabled.
    The save location for sent messages was changed to another folder.
    There is a custom view set on Sent Items folder, or the view on
    Sent Items is corrupt.
    Outlook Data File may be damaged.
    To resolve the issue, use the appropriate method for your situation.
    Enable the Save copies of messages in the Sent Items folder
    option
    To configure Outlook 2013 to save copies of your sent messages in the Sent Items folder, please follow these steps:
    1. Click File tab > Options.
    2. Click Mail on the left pane.  
    3. Scroll to the Save Messages section, select the check box before “Save copies of messages in the Sent Items folder”.
    4. Click OK.
    If it is the replying message that is not saving to the Sent Items folder, we need to disable the “When replying to a message that is not in the Inbox, save the reply in the same folder” option in the location mentioned above.
    If you’re using an IMAP account, please also make sure you didn’t select the “Do not save copies of sent items” in Account Settings. To check this, Please refer to the following steps:
    1. In Outlook, click File tab > Info.
    2. Click Account Settings > Account Settings, and then double-click your IMAP account to open the
    Change Account wizard.
    3. Click More Settings button.
    4. Under Sent Items heading, clear the check box before “Do not save copies of sent items”.
    5. Click OK and click Next to complete the configuration.
    Make sure there is no rule or anything else to redirect sent messages to other folders
    To check if it is caused by Outlook rules, please follow these steps:
    1. In Outlook 2013, click Home tab.
    2. Click Rules > Manage Rules & Alerts.
    3. In the rules list, check if there is any rule that applied to the sent messages may cause this issue.
    In addition, some rules may be corrupt or hidden and we cannot see them from the rules list. We need to use the MFCMAPI tool to find and delete the corrupt/hidden rules. To do this, we can use the following steps:
    1. Download MFCMAPI tool from: http://mfcmapi.codeplex.com/
    2. Start MFCMAPI tool.
    3. Click Session menu >
    Logon, select the Outlook profile you are using and click OK.
    4. Double-click the mailbox that contains the inbox rules that you want to delete.
    5. A new window will open. In the new window, expand
    Root Container or Root – Mailbox, and then expand
    Top of Information Store or IPM_SUBTREE.
    6. Right click on Inbox and select
    Open associated contents table.
    7. In the Inbox window, locate and then right-click the items that have the
    IPM.Rule.Message message class, and then click Delete Message.
    To identify a specific rule, you’ll have to select the rule in the top pane in MFCMAPI and then scroll down in the lower pane and look at the
    Property name(s) column. Find the ptagRuleMsgName property name and check the value against the rule name you were trying to delete in Outlook.
    8. In the Delete Item dialog, select
    DELETE_HARD_DELETE from the Deletion Style drop-down menu.
    9. Click OK.
    Reset the view settings on Sent Items folder
    If you accidently changed the view settings on Sent Items folder, this may cause some sent messages not visible in the folder. To check if you’ve set any view settings on Sent Items folder, please follow:
    1. In Outlook, select Sent Items folder.
    2. Click View tab from the Ribbon.
    3. Click View Settings button. If you notice the
    Reset Current View button is clickable, it means the view settings for Sent Items have been changed before.
    4. Click the Reset Current View button and then check the Sent Items folder again.
    Scan and repair the Outlook Data File
    To repair the .pst file, please follow:
    1. Find and start the Inbox Repair Tool in the following path:
    For Outlook 2013 on a 32-bit version of Windows:
    <disk drive>\Program Files\Microsoft Office 15\root\office15
    For Outlook 2013 on a 64-bit version of Windows:
    <disk drive>\Program Files(x86)\Microsoft Office 15\root\office15
    2. In the Inbox Repair tool, click Browse to locate the PST file by using the Windows file system.
    3. Click Start.
    4. After the analysis scan has completed, it will present you with a scanning report and options for the next step. Click Repair button.
    To repair the .ost file, since this type of data file is a copy of information saved on your mail server, we can just delete the OST file and restart Outlook to re-create a new one.
    For more information about repair Outlook data files, please refer to this article:
    Repair Outlook Data Files (.pst and .ost).
    If you have any comments on this topic, please feel free to post here.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Same problem here, connecting to a Groupwise (not latest) server. Whenever Mail.app 3 tries to upload/save a new messsage to the server, it would not save and completely lose the message!
    I found slightly more information by turning off the "Save to server" option for Sent and Drafts, created a new message that I saved as draft, and then tried to manually move items to the Drafts or Sent folder on the IMAP server.
    The error I received was: The message <message> could not be moved to the mailbox <mailbox>-<account>. The IMAP command "APPEND" (to <mailbox>) failed with server error: APPEND NotJunk.
    To my inexperienced eyes, it looks like the latest version of Mail changed it's default IMAP handling commands that may be incompatible with older IMAP servers. Anyone else have more insight or know how I can get back Mail.app 2.x from Tiger?

  • Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

    Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
    How/Where to increase the relationship count?
    The message which I can see :
    Warning:
    This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
    Thanks

    This really brings up a larger topic around change management.
    The questions you should start with is
    1. What kind of change is happening to the raw material? 
    2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
    3. Who needs to approve this change?
    If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession.   Get Latest Revision will automatically switch out the material with the latest approved version.  This logic is also configurable in case you need to add additional guard conditions.   We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
    If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification.  Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur.   Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks. 
    Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes.  We can also schedule a change management training session for everyone where we can share our vision and tools available for change management.  This topic is quite large and generally requires a lot of business process discussion beyond just the tools available. 
    Thanks
    Kelly

  • In trying to install a Flash update on my Mac (version 10.7.5), I'm getting an "unable to install metafile" message after initialization starts (at the 25% point)-regardless of the site from which I download the installation folder.

    In trying to install a Flash update on my Mac (version 10.7.5), I'm getting an "unable to install metafile" message after initialization starts (at the 25% point)—regardless of the site from which I download the installation folder.

    Hello everybody, good news: after upgrading to Mountain Lion 10.8.5 I've been able to run the installer and all went fine.
    Mountain Lion allows user to force execution through the context-menu (CTRL-click) Open command and it does work, just that simple.
    So my advice is: if you want to install or re-install Flash Builder 4.6 on a Mac with Lion installed, upgrade to Mountain Lion or better to avoid problems.
    Apple introduced some (not all) Gatekeeper functionalities in 10.7.3 and following, but apparently you need a full-fledged 10.8 to have also what you need to circumvent a Revoked Certificate error.
    Since usually OS X has auto updating active, if you are running Lion you end up with 10.7.5 and won't install FB46. If you manage somehow to hold 10.7.2 I suppose you should be able to install FB46, sincerely I didn't check it out. Anyway it's simpler and safer to move on to 10.8.x.
    Bye

  • Issuing a warning message while changing the payment terms in FB02

    Hi Gurus,
    The requirement is as follows:
    For a particular payment terms meant for customer only when we change the payment terms in FB02, the system should give an warning message.
    For example - A customer has the payment terms 0001in his master data and thus in the accoutning document as well after releasing billing to accounting. An user wants to change the payment terms to 0070 being in FB02. As and when he puts the payment terms 0070, the system should give an warning meesage saying 'bla bla bla ........' or the same message at the time of saving the document.
    How to make this possible. Please help.
    Rgds,
    BABA

    Mr. Tiwari,
    This is the standard feature of SAP!!!  You get below messages
    1)
    Net due date on 05.10.2007 is in the past
    Message no. F5149
    Effects on Customizing
    You can define when this system message is to be issued in accordance with your requirements.
    You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
    The application area and message number can be taken from the technical documentation.
    2)
    Net due date on 05.10.2007 is in the past
    Message no. F5149
    Effects on Customizing
    You can define when this system message is to be issued in accordance with your requirements.
    You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
    The application area and message number can be taken from the technical documentation.
    Terms of payment changed; Check
    Message no. F5231
    Effects on Customizing
    You can define when this system message is to be issued in accordance with your requirements.
    You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
    The application area and message number can be taken from the technical documentation.
    Regards
    Santosh Hegde

  • Interface getting failed after changing the Business system to that service

    Hello All,
    Our Env... is XI 3.0 and this is related to produciton env.
    Based on our client requirment to change the business system from client 871 to 100 for  one of the R3 system which is reciever type(rfc).
    After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in  the system.
    The steps which I have followed to change the Business system.
    1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
    2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
    3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
    Then i saved the changes and after that i have activated that interface.
    After that when i logged into CC monitoring and viewed that service channels and see the following errors:
    Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
    Error can not instantiate RfcPool caused by:
    com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
    Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
    Awaiting for your reply.
    Best Regards
    Rakesh Reddy

    Hello Nisar
    Thanks for the update,
    Let me say few points  about this particular problem:
    1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
    And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
    2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
    3>As mentioned by you , I have checked all the points mentioned
        i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
       ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
       iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
    I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
    It says that:
    RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
    Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
    If any information required , I can provide that.
    Best Regards
    Rakesh Reddy

  • Warning message After Pass correction to test Phase

    While transporting a request through Change request management, after pass correction to test, the system shows a warning message 'No Import into test system has taken place yet'. And further, Logon to System message takes us to the Development system and not into Quality system. On further drill down, it was found that if the STMS Queue for Quality is manually refreshed
    after the pass correction to test phase, this warning disappears and Logon to system takes us to Quality system itself. And this manual refreshing has to be done for each and every ticket. Kindly provide a solution to skip this warning message and also to avoid this manual refreshing of the Transport queue. Please Help.
    Regards
    Manu

    Manu,
    Do you get this warning right away when you choose the "Pass Correction to Test" action and hit save, or does it take a few minutes?
    We had an issue where ChaRM was timing out when the import was running.  The Import lasted more than 25 or so seconds, so ChaRM gave up and said it didn't happen, when in fact it was just not finished yet.  We increased the time that ChaRM waits for the import to finish and now it works perfectly.
    In case this is your issue, you can increase the time ChaRM waits for the import to finish by adding the parameter CHECK_NTIMES_SOCM to the user profile of the person performing the import.  The default value is 5, which means that ChaRM checks the import status 5 times (5 second intervals).  Our security transports were taking over 2 minutes, so we had to make the value of the parameter 60 (60 checks in 5 second intervals).
    Hope this helps,
    Michele

  • Misleading warning message after syncing iPod touch via iTunes

    I have a 2nd gen iPod Touch running iOS 4.02 and am using iTunes 9.2.1 on my MacBook Pro running Mac OS X 10.6.4
    When I sync my iPod Touch via iTunes, by clicking the Sync button ( and without changing any settings on the iPod Touch ) I get the following strange situation.
    In the middle of the sync process, the Sync button in iTunes is replaced by a Cancel button and an Apply button.
    After the syncing process is completed, if instead of ejecting the iPod touch I select a different row in the Library column of iTunes ( such as Podcasts or Music ), I got a popup warning message that says:
    "You have changed the settings for the iPod "iPod touch". Would you like to apply these changes?"
    I am presented with two buttons labeled respectively: Apply and Don't Apply.
    My question is: Snce I have not changed any settings on my iPod, but only have synced podcasts and music and apps (whatever has changed in iTunes) why am I being told that I have changed the settings on my iPod?

    You've posted in the WRONG forum. You won't get any help here unless your question is about Apple's server hardware.

  • Warning appears after changing the load properties of BW iview

    Hi,
       I get a warning "Object Expected" after changing the load property category of BW report iview.
    Allow Client-Side caching (BrowserOnly) <- (Yes)
    Cache Level (Session) <- (None)
       How to remove this warning message? This does not happen for webdynpro iviews.
    Thanks
    Sumathi

    Hi,
       This warning message is removed when Allow Client-Side caching is set to "Yes".
    Thanks
    Sumathi

  • Custom program - unknown warning messages after upgrade (4.6c to ECC 6.0)

    Hi,
    At work, we are currently upgrading from 4.6c to ECC 6.0
    One of the custom (z) programs that was moved is displaying warning messages, and preventing the user from viewing a report.
    The warnings appeared in ECC 6, but were never there in 4.6c. The warning message is "Restrict your selection". However, no matter how much criteria is entered, the warning message still appears.
    The program code uses no messages or error handling, and the messages show up on the initial selection screen, after hitting execute.
    However, just for testing, I copied the program to my own z program and it works fine.
    Why is this happening with the original program? While creating a new program with copied code fixes the problem, I donu2019t understand why this would be happening in the 1st place.
    Any ideas?

    So what the zprogram does? what tables are involved in the report, if possible post a link to your code.
    Regards
    Karthik D

  • Warning message after generating RMM Customizing Group

    Hi experts!<br>
    <br>
    I want to generate a customizing group in transaction sdoe_rmm01 in order to prepare the receiver generation. The generation process aborts with the following warning message: "201-Err:Metainfo FM MMW_RMM_METH_META_REG_SERVICE", Message no. RMM034.<br>
    Although it is only a warning message, the group is not getting generated. When I want to generate existing customizing groups, the same behaviour can be observed.<br><br>
    I have looked for more details regarding the warning message and it is number, but I was not successful. Has anybody an idea what the problem is?<br>
    <br>
    Thanks in advance and best regards,<br>
    <br>
    Christoph

    There can be only two possibilities:
    1. You did something wrong which you need to correct
    2. The DOE encountered a programmatic error while generating.
    No matter what the problem is, any sort of error/warning that stops generation should (atleast briefly) explain what the problem is. This one is not. So my opinion is: Raise an OSS message.
    Moreover, the fact that it is referring to a 'metainfo' sounds more like a programmatic error.
    Also: Search SAP Notes referring to a similiar message. Maybe its already fixed.
    Cheers!

  • Not Getting Warning Messages in Telesales,but getting the  Same in  Sales

    Hi,
    I have set the profile oprion "OS: Opportunity Probability Link" to Warning. This should prompt a warning message when the Sales Stage and Win Probalility shold not match,this is happening in Oracle Sales,but the Same Warning Message is not coming in Telesales, Could all please tell me how can we achive it.
    When I Set the Profile Option "OS: Opportunity Probability Link" to Error ,the Error message is coming in Both Telesales and Oracle Sales.
    Please help me on this
    Thanks and Regards
    Raju

    what version are you in? I see it a pass on 11.5.10.2

  • Recovering Mail Messages after Fixing Mail from the 10.5.6 upgrade.

    I installed the 10.5.6 upgrade and while using mail found I couldn't sent a new message. I rebooted on the hopes it would clear up the problem but instead Mail started up as if I was a new user. I did not reinstall the info for the 5 email addresses I use for fear I'd overwrite the existing email boxes for the 5 addresses.
    I ran the upgrade combo (used the straight update the first time I went from 10.5.6) and then created a new users just for testing Mail. I ran Mail and entered the account info requested for one of my email addresses. It worked fine. Now for the question - how do I now log in as "myself" and access the mail boxes that exist on my hard drive?
    Any help will be greatly appreciated.

    If your accounts are POP and you didn't delete the messages, then I suspect they are still there, but Mail doesn't know it. So try this:
    1. Quit Mail if it's running.
    2. Go to ~/Library/Mail and delete the Envelope Index file(s).
    3. Restart Mail and wait for it to import your existing messages. When it's finished, Mail should function normally and all your email should be back where it belongs with any luck.
    Scully and I have to be at another Bureau training session, so we will be offline the rest of the evening.
    Mulder

  • Warning messages after repairing permissions

    I hope that someone out there can tell me what these messages mean after running Disk Utility on my new MBP. Here is what it says:
    Repairing permissions for “Mac HD”
    Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
    Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
    ACL found but not expected on "System/Library/User Template/English.lproj/Documents".
    ACL found but not expected on "System/Library/User Template/English.lproj/Downloads".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library".
    ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
    ACL found but not expected on "System/Library/User Template/English.lproj/Music".
    ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
    ACL found but not expected on "System/Library/User Template/English.lproj/Public".
    Warning: SUID file "Applications/Utilities/Keychain Access.app/Contents/Resources/kcproxy" has been modified and will not be repaired.
    Permissions repair complete

    It sounds like you used the 10.5.1 update using Software Update.
    Download the larger 110MB file of 10.5.1 directly from Apple and this will most likely take care of all but one SUID warning.
    http://www.apple.com/support/downloads/macosx1051update.html
    The remaining warning is normal and will cause no problems.

  • Warning Message after repairing disk permissions

    I received the following warning after running Repair Disk Permissions:
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    My computer has been crashing a lot. Apple ran hardware tests and everything appears to be running OK. Could this message hold the key to my problems?

    Probably not, please read this Apple Advice Letter:
    http://support.apple.com/kb/TS1448
    However it would be very beneficial if you provide more information about the circumstances and specifications of your iMac to determine why it's crashing. Also if you are running Activity Monitor to check and see how much FREEE RAM you have and if there are any processes taking up a lot of % CPU.
    Roger

Maybe you are looking for