Bonjour Blocked at Worked

What port can I ask the IT folks to unblock to gain access? iChat Bonjour doesn't work and neither does Printopia.

Hi,
Any Bonjour Connection needs port 5353 on the UDP Protocol to be available on the LAN.
This shows Bonjour Shares in the Shares Section of the Finder's side bar.
For iChat if you are going to Text Chat and send files you also need port 5297 and 5298 on UDP and 5298 on TCP.
To Video Chat you needs the same ports as using the AIM or Jabber Side as iChat uses the same methods and Protocols no matter which Buddy List you start from.
See this Apple Doc
It list all the ports iChat 3 uses (covers the smaller number iChat 4 and 5 use)
Table version (iChat 4 and 5)
||iChat Ports||TCP||UDP||
|AIM|5190|5190|
|A/V|none|5678, 16393-16402|
|Bonjour|5298|5297, 5298, 5353|
|Jabber|5220,5222, 5223|none|
Note this is the iChat 4 and 5 Range
Add port 5060 UDP for iChat 2 and 3 and extend the group of 10 to 16384-16403 (20 ports)
iChat 4 and 5 also uses an undeclared Random port to do the Screen Sharing part and works if you can and do use UPnP (Or Port Mapping Protocol) to open ports in your routing device.
Also look at this article about DNS and OS 10.6.x which maybe part of the issue (it directly effects Bonjour).
This is related but for the reverse action (Stopping Bonjour).
Also check Parental Controls is Not On for the Logged in Accounts.
Having this On Stops Bonjour in iChat (Not sure if it Stops Bonjour as a whole but it may explain why the Printopia does not work.
9:16 PM Thursday; January 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

  • Exceptions in popup blocking not work good

    why sub-domains in exceptions in popup blocking not work? if i add a particular subdomain it works, but when i add an star in subdomain to do for all not work:
    *.mihanblog.com
    *.blogfa.com
    //// Please add image upload on post feature to Firefox's support ////
    //// Also add a suggestion forum to Firefox's support (like Chrome's forums) ////
    Thanks

    Do not add a * because Firefox doesn't support wildcard that way.<br />
    Just specify the domain to apply the exception to a domains and all sub domains.
    *Bug 336207 - Add wildcards to cookie exceptions list to permit subdomains if all cookies are blocked

  • Webmail ad blocker not working in outlook hotmail

    I'm trying to figure out why my Webmail Ad Blocker stopped working in Outlook (Hotmail). I have tried everything I can, and even just reset Firefox to no avail.
    I still get the annoying ad-laden reading pane on the right side of my inbox and messages.
    Please help!

    Webmail Ad Blocker 4.2 has been released but it hasn't yet been reviewed, so it won't be available when you check for updates in the Add-ons Manager. You can install it manually if you trust the author.
    * https://addons.mozilla.org/firefox/addon/webmail-ad-blocker/versions/
    Otherwise, you can use the following style to get rid of the right-side pane on Outlook.com. Apply it either with the Stylish add-on (recommended) or the userContent.css file (for advanced users).
    * https://addons.mozilla.org/firefox/addon/stylish/
    * http://kb.mozillazine.org/UserContent.css
    <pre><nowiki>@-moz-document domain("mail.live.com") {
    #MainContent {
    margin-right: 3px !important;
    right: 3px !important
    }</nowiki></pre>
    ----

  • Block PP Work Center capacity  when breakdown maintenance order create on that work center

    Hi All,
    My Client want to Block PP Work Center  capacity when breakdown maintenance order create on that work center, how can i do it ..
    Please help me.
    Payal

    Dear Sir,
    I have Done Every think but still Production Order is create.
    CM50
    OIOI
    CO02
    Payal

  • Blocking of work center capacity for capacity planning

    How can i block a work center capacity for capacity planning during Machine breakdown( via a Preventive maintenance order)?
    i believe it will reduce machine capacity, yet how can i view this, against the previous capacity? is there a possible report or can it be shown through a transaction?

    Hi,
    In capacity header details screen not exactly as "can be used for capacity evaluation " but
    "relevent to finite sceduling"
    "can be used for several operations"
    "long term planning"
    these all indicators you can deflag this and check the results ,it may helpful to you.

  • How Can i Block the Work Center Once is used in Maintainence Order

    Dear Experts,
    How Can i Block the Work Center Once is used in Maintainence Order in PM module.
    In standard its not blocking the Work Center automatically. How this can be achieved.
    Regards
    Raghu
    Edited by: raghu m on Apr 21, 2009 10:36 AM

    Hi Muthukumar,
    1. You can using the user exit or BADI to control this.
    CONFPP01            PP order conf.: Determine customer specific default values           
    CONFPP02            PP order conf.: Customer specific input checks 1                     
    CONFPP03            PP order conf.: Cust. specific check after op. selection             
    CONFPP04            PP order conf.: Customer specific input checks 2                     
    CONFPP05            PP order conf.: Customer specific enhancements when saving           
    CONFPP06            PP Order Confirmations: Actual Data Transfer                         
    CONFPP07            Single Screen Entry: Inclusion of User-Defined Subscreens            
    BADI
    WORKORDER_CONFIRM
    the above are the user exits that are available fro the CO11N tcode.
    2. we have to take a help of the abaper to write coding fort his.
    3. The user exit should be called for the
    Work Center : YYYYY
    then check the relevant Work Center Once is used in open Maintainence Order and if it has a entry if then give a error message else allow the CO11N to perform.
    Regards,
    Sankaran

  • Blocking the work center

    Dears
    Is it possible to block the work center from Quality department for creating any more production order because of quality issue
    Like what we are blocking the vendor by using quality info record
    Thanks in advance
    Faisal

    Yes Sujit
    I understand that
    But There is any method to evaluate Work center in QM prospective
    In usge decision we have quality score is updating when ever we select respective UD code
    Any tips on this pls
    Faisal

  • CSS transition 'left' for ':before' block not work

    CSS transition 'left' for ':before' block not work.
    Some css rules:
    http://www.screencast.com/t/f2MaN5TRpY
    Video of working in firefox:
    http://www.screencast.com/t/YMBKR77kAQ
    Video of working in google chrome:
    http://www.screencast.com/t/yOc8tN7yZcA

    Is it just the left property that doesn't work?
    I found an old bug from 2010 where transition was first made to apply to generated content, but I don't know the details of which properties were tested: [https://bugzilla.mozilla.org/show_bug.cgi?id=555627 555627 – CSS Transition Cannot Be Applied to :before/:after insertions].

  • Say Credit limit block in working on certain documents

    HI FRIENDS
    I HAVE AN ERROR
    Say Credit limit block in working on certain documents

    Hi You have to look to the open-invoices / orderes/ ,.. if the total value is not hihger that you credit limit
    FD10N - Display balances
    FD11 - Analysis
    Paul

  • Upgraded DSL Modem, Now Bonjour Doesn't Work

    I upgraded my Qwest DSL Modem from an ActionTec GT-701 to an ActionTec PK5000 and now my Quicksilver G4 is not available via Bonjour (I'm using it as a print server). I switched back to the old router, and it works again, so the problem def. is the new router. I tried to see if the known ports are blocked (http://support.apple.com/kb/ts1629), but they don't appear to be - I turned off UPnP (Universal Plug N Play) just to be sure it didn't conflict but no joy. Somebody else out there seems to have had similar problems (http://h30434.www3.hp.com/t5/Mac-printing-and-scanning/Beware-of-the-ActionTec-P K5000-for-wireless-printing-with-HP/td-p/267515) but I'm not sure if it's a direct match.
    I upgraded to make my VOIP smoother, due to the integrated Ethernet switch in the modem. But I'm moving back to the old modem for now, and using an external switch.
    Anybody have any feedback on how to configure the new DSL modem correctly so Bonjour will work? I did notice an error in the system log:
    "mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.0.1."
    Could that be the trouble? I did try to fix the DNS settings on the modem. Again, no success.

    Thanks for that.
    Probably has an Application Layer Gateway (ALG) for SIP (Session Initiation Protocol) which is something iChat uses, that can not be changed from pushing SIP data to port 5060.
    SIP is also used by SIP/VoIP phones which gets around Long Distance charges so many ISPs block it until you pay for the "Extra Service" which a few years ago was open anyway.
    There was an International agreement that all SIP apps and equipment would use port 5060-5063. It was supposed to be accessible on a pass-through basis from one Internet Server to another but ISPs seem to have classed end users as a non through connections.
    Thomson-Alcatel have had a SIP Binding as they call it since there models could run Version 3 firmware. (You had to telnet into the device to turn it off)
    At version 5 firmware they changed it so that it could only be partially turned Off.
    Thomson-Alcatel make devices branded for other people including the HOME HUB from BT (Formerly British Telecom) who own 99% of Landline connections in the UK (they Wholesale out both Land lines and Broadband DSL connections).
    Various ISPs that supply modems often have them supplied with Branded Firmware on there. It tends to be these Branded versions that cause problems (Although the Thomson-Alcatel issue is below the Web Browser interface level).
    This may give clues as to where to look and how your device maybe accessed (telnet).
    10:28 PM Monday; August 30, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Switched networks, then back and now bonjour no longer works

    I was testing my neighbors network then i switched back and now my 2 PCs can no longer connect to the printer through bonjour. I ran the bonjour printer utility and it sees the printer on both, but then as it is connecting it says "you do not have sufficient access to your computer to connect to the selected printer" ive tried everything i can think of, i cant get it to wok on either network, and it used to work on mine. Each time it sees it there but gives the same error. I even tried changing the network name and doing it all over agian like the first day i connected them. I can see my shared folders and access files both form the PCs and the Mac. Its only the printers. HELP!!!

    Hi abstractls,
    You may be having the same problem as me. If the Airport Express is NOT connected to the internet, the Macs will still work, but the PC print routines say "you do not have sufficient access to your computer to connect to the selected printer" or just "An unknown error occurred during printing". If you reconnect the internet, the problem goes away.
    I suspect that the PC is not getting an IP address assigned to it by the Airport Express, and cannot cope without it, but the Mac is OK.
    My problem is that I do not want to connect the Airport Express to the net, I just want it to share a printer between Macs and PC. Does anyone know of a fix for that problem? I have told the Airport Express to ignore the lack of an internet connection, but that just switches off the amber light...

  • My first PL/SQL block not working with using Select query within begin

    I am new to PL/SQL , just started with basics of BLOCKS .
    I am having a query here in executing a block .
    When i am doing a insert oprtation in Blocks Begin method everything is working fine , but when ever i tried to do select operation , some error is being thrown .
    First of all This is my Table :
    select from try :*
    KEY      VALUE
    Key     Value
    Key1     Value1
    Key2     Value2
    Key3     Value3
    ======================
    This is the code which is not working : Please see the code and tell me what is the problem .
    DECLARE
    v_KEY    VARCHAR2(20);
    v_VALUE   VARCHAR2(20);
    BEGIN
    select key into v_KEY FROM try where v_value='Value' ;
    dbms_output.put_line(v_KEY);
    END;
    When i run this code , it is saying Data Not Found on this line " select key into v_KEY FROM try where v_value='Value' ;"
    wheer when i run tis individually it worked fine :
    select KEY FROM try where VALUE='Value' ;"
    please share your ideas .as why it isn't running ??
    Edited by: user10503747 on Sep 20, 2010 3:16 AM

    Hi,
    user10503747 wrote:
    I am new to PL/SQL , just started with basics of BLOCKS .
    I am having a query here in executing a block .
    When i am doing a insert oprtation in Blocks Begin method everything is working fine , but when ever i tried to do select operation , some error is being thrown .
    First of all This is my Table :
    select from try :*
    KEY      VALUE
    Key     Value
    Key1     Value1
    Key2     Value2
    Key3     Value3
    ======================
    This is the code which is not working : Please see the code and tell me what is the problem .
    DECLARE
    v_KEY    VARCHAR2(20);
    v_VALUE   VARCHAR2(20);
    BEGIN
    select key into v_KEY FROM try where v_value='Value' ;
    dbms_output.put_line(v_KEY);
    END;
    When i run this code , it is saying Data Not Found on this line " select key into v_KEY FROM try where v_value='Value' ;"
    wheer when i run tis individually it worked fine :
    select KEY FROM try where VALUE='Value' ;"
    please share your ideas .as why it isn't running ??
    Edited by: user10503747 on Sep 20, 2010 3:16 AMInstead of:
    {code}
    select key into v_KEY FROM try where v_value='Value' ;
    {code}
    perhaps you meant something like:
    {code}
    v_value := 'Value1';
    select key into v_KEY FROM try where v_value=Value ; -- No quotes
    {code}
    Until you assign a vlue to a variable, like v_value, it is NULL, so your original statement was equivalent to
    {code}
    select KEY FROM try where NULL='Value' ;
    {code}
    In PL/SQL, a SELECT ... INTO statement must return exactly one row, or else you will get an error (either NO_DATA_FOUND or TOO_MANY_ROWS). This is different from SQL, where a query cn return any number of rows, including 0, without raising an error.

  • Block production work center during maintenance order

    Dear Experts,
    iam trying to do the integration between PM and PP, I want to block the production work center from any production order  when there is any maintenance order opened for a certain equipment which is inside this  work center ,
    till now i did the following:
    1) the production work center is now inside the equipment location tab
    2) when i open any maintenance order i put system condition as zero
    now what i only achieved ,
    - in transaction CM25 the capacity is black for the period of the maintenance order
    BUT the work center is not blocked and any production order can be created without any error
    please help and much thanks in advance
    Best Regards

    Hi,
    Till time you have performed right things to integrate PP-PM & system is also responding according to setting.
    Showing block capicity in CM25 against the Maintenance Order.
    If you want to block production order as well, you need to do one more setting.
    go to t- code OIOI, selection Production order types (those you want to block) & in capacity Availabilty choose Collect conversion as 3 : No creation if there is insufficiant caacity.
    i hope this will definately solve your problem.
    - Yatharth

  • Why isn't the popup blocker exception working for sites I have added? It still asks me to "allow" them.

    Even though I have added sites to the Exceptions in the Popup Blocker preferences, I constantly have to press the Allow button to actually go to the next window. The sites are staying in the Exceptions list and I can get there, but something clearly isn't working properly.

    I have been adding each domain name that pops up that's different from the original website and Firefox is still asking me to "Allow" it. Very frustrating...

  • UCCE 7.5(8) CAD 7.5.1.59 got blocked in Working Ready state

    Hi all,
    We're using UCCE 7.5(8) with CAD 7.5.1.59. From time to time, we remarked some CAD get blocked in the Working Ready state after ending a call.
    Our wrap up time is currently configured to 2 hours (as requested by client) so the CAD wont turn back to Ready state automatically.
    The CAD can be unblocked by an internal call (no UCCE)
    Anyone experiences the same problem?
    Thanks in advance.
    Best regards,

    @Geoff:
    Thank you for all the good sugesstions, however unfortunately none of them is possible to me
    I would try this using the CTIOS client on your test machine, just to  eliminate CAD a little. From the trace, it doesn't appear to matter,  since you are looking at the pure CTIOS trace messages, and they are the  issue - but I like CTIOS for this sort of debugging.
    --> We are using CAD and do not have CTIOS client installed. Does the soft actually come with the UCCE installation package? Can you please tell me where I can find it?
    @Geoff and Ed
    Dissociate and re-associate the device with JTAPI and retest.
    --> Good point, I did the same actually but the phone still didn't work.
    Nevertheless, I really think we have a network problem (which was observed time to time before)
    I will update this thread as soon as I can do some further tests.
    Thanks,
    Regards,

Maybe you are looking for