Bonjour broken on one of my machines

One of my machines, bonjour sometimes has problems - ie. I cannot see other bonjour devices on the local network. If I check on another machine, I can see the bonjour devices.
The problem always appears on one machine. Bonjour will work for about a week, then it has problems and I can see bonjour devices from the machine (ie print to a bonjour printer).
Is their anyway to fix this without a reinstall of the OS.
thanks

Post Author: FML
CA Forum: General
I had a similar error. Fixed it by reducing the "Hardware Acceleration" on the "Display Properties" in Windows.
I started by closing Crystal then moving the slider one notch to the left and then opening Crystal.  If the problem persists, repeat the process moving the slider to the left until the problem goes away. On our HP systems, it turned out that the third notch from the left is the magic spot.
I have had to do this on all the machines in our office that have "shared" video RAM. Have not had to do it on machines that have dedicated video RAM.
Hope this does the trick.

Similar Messages

  • LabVIEW: The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located. Open the VI in LabVIEW using File Open and verify that it is runnable.

    When trying to run a sequence on a deployment machine I get this error. When I switch the Adaptor back to the Development System the problem goes away however I do not have the luxury of keeping the full Labview development on the test machine. Is there a know fix for this problem and what is the cause of this error. Here is the software and versions I am using. It seems that the vi's that are broken are using Invoke and Property Nodes within them, I am not sure if this is just a coincidence. It appears it is more related to the invoke node than the property node. Any help is greatly appreciated. Why does it seem everything works great until you try and deploy it on a test machine. This is not the first time I have had these kinds of problems using Nation Instruments software.
    Labview 8.2.1
    TestStand 4.0
    Solved!
    Go to Solution.

    I have a similar problem.
    A bit of background - I had developed a test suite with a Labview front panel for manual operations, and a Teststand project which used some of the same lower level vi's, and specific test step vi's. It was developed on LV 2010 32-bit and Teststand 2010. All was fine.
    Recently i had to rebuild my development machine and installed only LV 64-bit 2011 and the latest (2010) Teststand from the 2012 Dev Suite.
    I knew that i wanted to run some new hardware drivers in 64-bit versions due to another problem, so i replaced the .dll in the very lowest level VI with the 64 bit version. And ran the manual interface. All ok.
    But when i try the Teststand execution, i get one of two errors:
    - If i set Teststand to use the LV runtime engine 11.0.1 (2011 SP1), the i get a "Unable to load VI xxxxx with the runtime engine version '11.0'" Despite the fact that each VI does run correctly in LV dev when loaded individually, and i've saved them as version 11.
    - If i set it to use the development system (which shows in the config menu 'active version:32-bit' even though 32-bit LV is not installed), then i get the "The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located." error, even though i when i open each VI in the LV 2011 it runs ok.
    Any ideas?
    How can i set TS dev system to use the 64-bit version? Or is there a separate 64-bit deployemrnt of TS?
    Labview 2010, TestStand 2010

  • Can I have two Time Capsules in the same network, use one as Time Machine and other to expand network?

    I need to purchase a divice to expand my Wi-fi network. I was looking at the AirPort Extreme, but a friend has a brand new Time Capsule for sale. So, for the same price of the AirPort Extreme, I´m getting the Time Capsule.
    I already own one and using it as Time Machine and wireless router. If I decide to purchase another TC would it have any conflict with the one that I already have?
    Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?

    If I decide to purchase another TC would it have any conflict with the one that I already have?
    No
    Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?
    Yes. The important thing to remember is that the "extending" Time Capsule must be located where it can receive a strong wireless signal from your "main" Time Capsule.

  • Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

    Can I set up multiple usb hard drives- one for time machine and a second for media?
    Can one also print wirelessly with an old HP C6280 printer?

    Can I set up multiple usb hard drives- one for time machine and a second for media?
    Yes.
    Can one also print wirelessly with an old HP C6280 printer?
    Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

  • I have one Windows 7 machine that can't map drive to Lion Share Point?

    I setup a Lion mac mini server.  Mac and Windows clients all can map a drive to the Lion share points with the exception of one Windows 7 machine.  When mapping I continually get "the specified network password is not correct" message regardless of which credentials I use.  I tried changing the win7 network settings and turning off the firewall but nothing has allowed a connection to happen yet.  Any help is appreciated !!!

    Also, when browsing the network and choosing the server in the list, I get a login prompt with the error at the bottom "Logon failure: unknown user name or bad password."  It's almost like it is trying to use some other credentials automatically?

  • How does one get Time Machine out of a "Preparing to Backup" loop to actually doing a backup? thanks, AR

    How does one get Time Machine out of a "Preparing to Backup" loop to actually doing a backup? thanks, AR

    Hi..
    Thanks for the reply..
    My original I Phone 5 was running IOS 6.12
    My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
    Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
    I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
    So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
    I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
    but it doesn't help me..
    Steve

  • Startup issue when having more than one database on machine

    Startup issue when having more than one database on machine:
    I’ve installed two databases.
    When I shutdown one of the database and try to start it up using
    Startup pfile=’…location..’;
    I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
    when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
    Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
    I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
    I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
    Anyone know how to get this working, i.e. starting and stopping DB without issues?
    Using oracle 11gR2 on Windows 7 64bit, all is working normal.
    Thanks,
    Ayman
    Edited by: aymanzone on Jun 15, 2011 9:27 AM

    aymanzone wrote:
    my oracle_sid is set to the name of one of my databases
    echo %oracle_sid%
    shows me the name of my first database.
    Still not working though.
    When I start the services of both databases using Services, I can connect and run queries from both of the database.
    Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
    Next ... from the command prompt:
    set oracle_sid=<Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
    From the same command prompt session or other ....
    set oracle_sid=<Other_Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Edited by: Srikanth on Jun 16, 2011 12:27 AM

  • Several SSM-Instances on one NW CE Machine?

    Hi,
    does anyone have some experiences in installing several SSM 7.0-Instances on one NW CE machine? What is the official statement of SAP?
    Thanks a lot!
    Patrick

    Hi Bob,
    my questions is: Can I have several productive installations of SSM 7.0 on one NW CE plattform?
    Like this:
    SSM7.0 (1);             SSM7.0 (2);             SSM7.0 (n);
    NW CE----
    1Server----
    Regards,
    Patrick

  • Can I backup two macs onto one external time machine?

    Can I backup two macs onto one external time machine drive? I am trying to do this over Wi-Fi.

    Yes, the external drive has to be formatted correctly to HFS+ and shared to the network.
    It doesn't matter how the second machine logs into the network but wireless back will be extremely slow as it will involve double hop wireless, I presume to a wifi router somewhere. For incremental backups this is no biggie but do the initial backup with the drive plugged into that particular computer or over ethernet.. gigabit for preference.
    Pondini has some instructions as he has for most things.
    http://pondini.org/TM/4.html
    Also look at Q33 where he lists using a shared drive on another Mac.
    If you are planning using something other than wifi router give clear information about the network layout you have and hope to use.

  • I get a message saying backup failed on my Time Machine because backup disk image is already in use. I am the only one using this machine.

    My Time Capsule keeps telling me that backup failed because backup disk image is already in use. I'm the only one using this machine.

    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    Wait a few minutes, then try a backup

  • I have mi new ipad screen broken in one corner, I was really disappointed because it was drop from about 30 cm so I was not expecting the screen to be broken, well I went to apple store in regents street in London  and I was told that I have to pay 250 po

    I have mi new ipad screen broken in one corner, I was really disappointed because it was drop from about 30 cm so I was not expecting the screen to be broken, well I went to apple store in regents street in London  and I was told that I have to pay 250 pounds for the screen replacement, it was a rip off and after many years using apple products I have expend thousands of pounds on them, I just think is  a rip off price. It will be difficult but I won't be buying any apple products anymore, I really feel like I was abuse that was half of the price of a new iPad. I have never complain in my life but this time I think apple is abusing me as a costumer.
    I'm really upset, I'm furious that apple uses his dominance in the market to Rip off costumers like me.

    Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
    You can get the glass replaced at 3rd party repair sources for less $, however, the Apple warranty will be voided.
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    Don't know if there are any 3rd party repair places in the UK.
     Cheers, Tom

  • Sync one folder two machines - Is it really that hard.

    Sync one folder two machines - Is it really that hard.
    I have one folder (with a bunch of subfolders totally 3k of image files) I'd like to mirror them on both my laptop and desktop machines.
    I'd like the Desktop machine to mirror everything on the laptop and when I travel with the laptop I add images once I return everything new will be copied over.
    Things I don't want in this system
    • Third party software, If the OSX 10.4.8 can do it all the better
    • Having to Manually hit a sync button. (But willing to budge on this one)
    • It Making a duplicate copy of the folder each and everytime it connects.
    I have looked at a few free items on mac's website:
    Auto-backup Script (written in 2000)
    http://www.apple.com/applescript/folderactions/05.html
    Sync Folders 0.9 (written in 2004)
    http://www.apple.com/downloads/macosx/automator/syncfolders.html
    But I can't seem to get either to work on my machines The script is asking me to do something that I can't even phyically do anymore in 10.4.8
    any idea's or suggestions?
    Thanks
    Robert Dall
    iMac G4, iBook G4   Mac OS X (10.4.8)   80g video ipod (black is back baby!)

    So much for other people having lives to live...
    I'd help you out if I knew anything about rsync, and
    I'm sure many others would, too, but apparently the
    ones who do know are doing other things. Considering
    it's a weekend, that really shouldn't be surprising.
    There are people and companies that give such
    immediate service for a fee. Look around and I'm sure
    you'll find one that'll offer to not only advise you
    but will also create the solution for you. They'll
    even you let you have the solution, for a price.
    Azqi, please don't belittle me about how the captitalism works in the world. I might been in a small community outside Vancouver that doesn't even have a large MAC dealership who could answer my question. I was already at the shop that does deal in mac because I wanted to SHOP LOCAL. I am perfectly aware I am on a FREE forum and have a life outside of this forum also! I waited four days before I said what I said and before my little question was lost in the forums. If I had 300 responses to my question like yours I'd never return. . . .
    I am just saying that it has been a bit of a cold welcome to these forums, as this isn't the first question that has gone unanswered. . . . and thanks to some helpful folks it isn't.

  • Bonjour printing broken on one computer

    I have a small LAN, partly wired, partly wireless. Up until today, all of the computers (both Macs and PCs, wireless and wired) could print fine to both Bonjour printers (one wired, one shared through an AEBS).
    Now, one of the computers (dual 2.0 G5), connected via ethernet, won't print via Bonjour: it insists that the printers have "jobs stopped", and restarting jobs just cycles back into "jobs stopped".
    I can print to both printers on this machine if I enter their IP addresses, but it bothers me that Bonjour is busted. I've tried Printer Setup Repair, to no avail: anytime I add either of the Bonjour printers, the same thing happens.
    Any advice?

    Delete printer, then add it back. Restart the computer.

  • Connection with sapinst get broken: Netweaver 2004 on aix machine

    Hi
    I am installing Netweaver 2004 on aix machine.
    Java instance
    database : maxdb
    When I run sapinst , connection with it get broken in between.
    Warnings and errors are as follows:
    Current (soft) resource limit stacksize should be unlimited but it is 33554432. This may cause core dumps. Stop the installation set the limit to unlimited and start again.
    WARNING    2007-05-08 13:19:56 [sapinst.cpp:124]
               CSapInst::initMessaging()
    Current (soft) resource limit stacksize should be unlimited but it is 33554432. This may cause core dumps. Stop the installation set the limit to unlimited and start again.
    Current (soft) resource limit datasize should be unlimited but it is 134217728. This may cause core dumps. Stop the installation set the limit to unlimited and start again.
    WARNING    2007-05-08 13:19:56 [sapinst.cpp:139]
               CSapInst::initMessaging()
    Current (soft) resource limit datasize should be unlimited but it is 134217728. This may cause core dumps. Stop the installation set the limit to unlimited and start again.
    <b>iauxsysex.c:317: child /tmp/sapinst_exe.631026.1178648293/sapinst (pid 753700) has crashed. Executable directory is /tmp/sapinst_exe.631026.1178648293. Contact Support.
    iaextract.c:885: child has signaled an exec error. Keeping directory /tmp/sapinst_exe.631026.1178648293</b>
    What is the solution for this?

    "Current (soft) <b>resource limit stacksize should be unlimited</b> but it is 33554432. This may cause core dumps. Stop the installation set the limit to unlimited and start again."
    -> plz check your root values using SMITTY -> Security & Users -> Users -> Change/Show  Characteristics of a User -> insert 'root' -> check parameter 'Soft STACK size' -> value should be '-1' (minus one)
    GreetZ, AH

  • Bonjour broken after 10.8.5 update

    I have a home network consisting of 4 Macs. 3 are running the latest version of 10.6. The fourth computer, a MacBookPro 4,1 (early 2008) is running 10.8. After installing the 10.8.5 update on the MacBook Pro, I'm now unable to connect to the other computers on the network via Bonjour, or to see/print to any shared printers. None of the other computers have any trouble seeing one another or printing, the MBP alone seems to be the issue. I can ping other machines from the MBP, and Remote Desktop works.
    I've tried switching wifi on/off, rebooting, deleting the network location and recreating it from scratch, and flushing the cache using dscacheutil, all without success. I'm able to see the shared computers in the sidebar in the Finder, but if I click on them the connection times out.

    Bomjour is mDNSResponder. They're one and the same.
    Please read this whole message before doing anything.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef 
    Step 4
    ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of login items' | open -ef 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

Maybe you are looking for