Bonjour drive not in 10.6 but show in 10.4

I have a Western Digital Live Media Hub. The drive shows up in my network connected computer with 10.4.11 and my iPods. But I can not connect to the drive with a MacBook Pro on 10.6.7.
I have a Cisco EPC3925 wireless modem/router that is connected via ethernet to the WDTV hub.Both computers iMac-10.4 and MacBook Pro 13 " 5.5 with 10.6, are connected through WiFi. The iPods also work on WiFi.
What can be the problem? Can it be that 10.6.7 does not 'match' the cisco modem? I had it replaced and before with a thompson modem everything worked ok.
I can see the iMac on my MacBook and I can see the MacBook on my iMac. But I cannot see the media-drive on my MacBook.

Hi Eric,
That was checked all the time. However I did make a mistake in my original post. I can see the hub on my iMac 10.4.11 but not on my iPods....
However, since the WDTV hub has a Twonky server built in, I can connect to the device from my MacBook Pro. I can use a web-browser and type in the ip address to connect to the hub and activate twonky after wich I can use that.

Similar Messages

ICal download for Jewish holidays will not populate iCal calendar but shows up on "Subscription" section of list of calendar

iCal download for Jewish holidays will not populate iCal calendar but shows up on "Subscription" section of list of calendars. Help?

I am having the same issue, as is my husband and a friend. We have both been subscribers to this calendar for several years and as of Jan 1 it no longer populates iCal. I have subscribed to it again but, while it shows up in subscribed calendars it still does not populate. I would appreciate some help.

Primary index does not exist in database but shows in SE14?

I added a couple of key fields to a Z table and activated it. Every thing went well - adjusted it with SE14 also.
When I checked the Runtime object - it is OK.
When I checked Database Object, it is showing that the Primary Index does not exist in Database but SE14 says that the Priamry Index exists in Database.
Please advise how to correct this. I saw another psoting when I searched per this error message: "Indexes: Inconsistent with DDIC source" . It tells to create this index at Database but need to know the steps.
pl advise.
(reposting here)
Edited by: Venkatabby on Mar 26, 2008 4:05 PM

hi,
To create a index for a table,
go to se11->click on Indexes tab and create a primary index.
Indexes speed up data selection from the database. They consist of selected fields of a table, of which a copy is then made in sorted order. If you specify the index fields correctly in a condition in the WHERE or HAVING clause, the system only searches part of the index (index range scan).
The system automatically creates the primary index. It consists of the primary key fields of the database table. This means that for each combination of fields in the index, there is a maximum of one line in the table. This kind of index is also known as UNIQUE.
If you cannot use the primary index to determine the result set because, for example, none of the primary index fields occur in the WHERE or HAVINGclauses, the system searches through the entire table (full table scan). For this case, you can create secondary indexes, which can restrict the number of table entries searched to form the result set.
You create secondary indexes using the ABAP Dictionary. There you can create its columns and define it as UNIQUE.
reward points if useful.
regards
sandhya

IPod touch 4th generation will not sync with iTunes, but shows up in Windows 7 64bit(Acer Aspire laptop)

Hello all, I am writing this message in the hope that somebody can help me to solve my issue with my iPod touch fourth generation. It has been unable to sync with iTunes, but shows up in windows as the iPod touch. I also had this problem with my older iPods as well (Ipod nano 4th Gen, iPod touch 2nd gen(Batteries done for that one)) I can sync music with iCloud, but I have a bunch of songs that are not in the store, and I sincerely want to add those, alot.
I've checked the "iPod appears in Windows but not in iTunes" with the link here: (http://support.apple.com/kb/TS1363), and followed that process, but to no avail, it does not solve the problem. I've tried to reset the entire ipod by making it enter DFU mode and then rebooting the entire iPod (shows up in iTunes in temporary mode) but once restored, does not appear in iTunes, but still in Windows detected still as a iPod, looks like the iPod and everything. I also have the most uup-to-date iTunes installed (10.5 I believe, just got it today)
This is extremely frustrating because that is why I purchased the iPod (and for the games and apps, those are great too). The iPod was also purchased three days ago, and the setup still didn't detect it. I am not mad at anybody here or the Apple company itself, but I have not found any help online with the browsing option (for support of course).
Please, I would absolutely love the help, i'd be eternally grateful for it.
-Tyler

Never mind, turns out that by uninstalling the programs "Megakey" and "Megaupload" it had resolved this issue.

New tab does not come up blank but shows firefox unable to bring up web site in box

Pressing + on Tab bar does not come up blank, but comes up as Server not found Firefox can't find the server at www.
then various letters and symbols oki.com
How do I get rid of this to enable a blank page or nine illustrated tabs to come up, as on my other laptop?

You won't see the SearchReset extension in "Tools > Add-ons > Extensions" because the code only run once and the extension automatically uninstalls itself, so this is expected behavior.
You can check for problems with preferences and rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
You can try to create a new profile or reset Firefox.
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
If you reset Firefox then a new profile is created and some of your data (bookmarks, history, cookies, passwords, form data) is automatically imported and your current profile will be moved to the desktop (Old Firefox Data).
You will lose extensions and other customizations (toolbars, prefs) that you've made.
It is possible to recover more data from the old profile, but be cautious to avoid carrying over the problem.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

Hard Drive not detected through SATA, but it is through USB.

This week my hard drive seemed to crash, I got the file with the question mark and it wouldn't show up in disk utility. I went out and bought a new hard drive, popped it in and it too doesn't show up. I put my old hard drive in an enclosure and plugged it in through USB, and my macbook starts up just fine that way. What could be the problem?

dcbaros wrote:
Well I know the drive is fine because I can run it from the usb enclosure, but is the sata cable going bad a common problem?
Not common but I've seen it happen more than once so I wouldn't be surprised if that is what's going on with your computer.

Lacie External Hard Drive not recognized on Mac but recognized on PC

I just got both a MacBook Pro and a LaCie 1TB Rugged Safe External Hard Drive just a few days ago. I just plugged in my external and I installed the needed software from the drive, restarted and the drive wasn't found in LaCie Safe Manager. I tried restarting the computer without the drive plugged in, with Firewire and USB, and then I even tried it on my PC -- which it worked on there. I was able to make an account onto the drive and put my finger prints and everything on the drive, but when I came back to the Mac it didn't work at all.
I can't say it's the drive itself because it worked on the PC. I don't Tried the Disk Utility and it's showing "999.91 GB LaCie" and then "NO NAME" under it, but tabed over.
And help/suggestions?

Thanks for the ideas, JaEvo and Paul Cuciti.
EDIT: I tried this, http://vimeo.com/7539772. I did this on the Mac but I still don't have anything. I tried both USB and Firewire. I have power to the drive because, after I swipe my fingerprint, the red blinking light turns steady green. Also, I don't know if Macs make a sound when something is connected to the computer, kinda like a PC, but mine doesn't make a noise when I connect in the drive -- I don't know if that'll help anything or not.

External Hard Drive not recognised on Intel but is on G4 iBook

Suddenly yesterday my iMac 5,1 running 10.6.8 stopped seeing the Time Machine External Hard Drive. The warning was that it had been disconnected not ejected properly,which I wasn't aware of. I couldn't afterwards get my iMac 7,1 running 10.9.2 to recognise it either. I tried Disk Utility verifying and repairing on both computers. Wouldn't finish, said needed backing up and re-formatting. It wouldn't erase on either because it couldn't be unmounted when it wasn't showing as mounted in the first place. Most of the data were backed up elsewhere and there was a recently used Time Machine I could put in its place.
Then I plugged it into my ancient G4 iBook running 10.4.11 and there it was on the screen with the contents accessible. I've tried verifying and repairing it there but either it's very slow or not really happening at all.
So what's going on? Ideally I'd like to copy the contents over to another drive but will have to get one first, then reformat somehow. I can imagine my G4 iBook will struggle with that. I've reconnected to the iMac 5,1 but it's still not showing there.

Well, this is embarrassing. A suggestion from an older thread on Macrumors.com called "Hard Drive does not appear in Finder / Desktop", solved this problem. Simply drag the missing drive icon from the desktop to Finder! Perseverance and different search wording AND reading a lot of stuff pays off.
If other's problem is not solved with this fix, you might benefit from this 10.5-based thread. They also mention an Apple 10.5 fix. Both URL's below.
The op's problem was that the drive did not appear in Finder OR the desktop but was operational. There was a lot of in-depth information with this fix embedded.
Thanks for the interest and suggestions.
Max
http://forums.macrumors.com/archive/index.php/t-209905.html
http://support.apple.com/kb/TA25203?viewlocale=en_US

External hard drive not visible in Finder, but is operating

iMac, 2 Gb RAM, Snow Leopard 10.6.4.
It has 4 external USB drives attached through a powered hub. All of a sudden, after about a year, one of them no longer shows up in ‘Finder’. However, all four drives have an icon on the desktop. The drive is visible and verifiable in ‘Disk Utility’. Double clicking the desktop icon opens the drive and I can copy a file from it. iTunes can see it. From a Macbook’s ‘Finder’, over WiFi, I can see and copy files to and from the drive. Finder Preferences shows nothing amiss. I’ve shut down and restarted the iMac several times with no change. The drive just does not show up in Finder on the host iMac.
Searching this forum has not helped. Any suggestions?
Max

Well, this is embarrassing. A suggestion from an older thread on Macrumors.com called "Hard Drive does not appear in Finder / Desktop", solved this problem. Simply drag the missing drive icon from the desktop to Finder! Perseverance and different search wording AND reading a lot of stuff pays off.
If other's problem is not solved with this fix, you might benefit from this 10.5-based thread. They also mention an Apple 10.5 fix. Both URL's below.
The op's problem was that the drive did not appear in Finder OR the desktop but was operational. There was a lot of in-depth information with this fix embedded.
Thanks for the interest and suggestions.
Max
http://forums.macrumors.com/archive/index.php/t-209905.html
http://support.apple.com/kb/TA25203?viewlocale=en_US

4GB Flash Drive not loading on Mac (but on Windows and Ubuntu)

Hello,
I have a 4GB flash drive (probably from LG) that I bought about 3 years ago. It was working just fine all this time but now, all of a sudden, it's gone. Not working, showing up neither in Finder nor in Disk Utility. But it works just fine on Windows 7 and Ubuntu. Files are even readable there. I tried re-formatting it on Ubuntu in FAT-32 but it still won't show up on a Mac.
Any other flash drive is showing up on my computer (tested with 2 different ones).
Any clue?

I don't claim to know the solution to your problem, but in your situation I would try either or both administrator install methods: 1) Right-click the downloaded install file, choose "Run as Administrator" and install the software as usual. 2) Try using a different Windows account that you are positively certain has full administrator rights or the actual Administrator login name, install with that account.
Also, make sure you empty the browser cache before retrying the http pages. What about other browser settings, like security or privacy settings? Any add-ons or antivirus browser helper objects?
Do you only use Internet Explorer, or is this issue the same in Firefox, Opera, Chrome and Safari?
Good luck, hope you get the error fixed.

Database files list on one drive in master.sys.master_files, but show on another in the file system

We have a one node cluster sql server instance where the machine was patched/updated and re-booted this past weekend. The machine came up, but the SQL Server did not because it could not locate RestoreCheckpointDB24.ckp on an
M drive. If I RESTOREFILELISTONLY on my backups everything was clearly on an N drive previously. To get by the error, our network team changed a registry key pointing to
N drive to M drive and everything magically came up. The file system and failover cluster manager are now showing all files to be on an
M drive, but if you query master.sys.master_files everything is showing on the
N drive. Anyone know how this is possible and how to resolve???
As well, a log shipping session is now broken because it's copying to a missing
N drive and my Management->SQL Server Logs folder is empty as well.
Any ideas? I'm completely baffled as well as our network guys.
Thanks!

I'm thinking your problem is:
"To get by the error, our network team changed a registry key pointing to N drive
to M drive
and everything magically came up."
That's called a hack and hacks usually have unexpected and adverse consequences.
And in more than 15 years of working with SQL Server I've never had to use a registry change to make SQL Server work. As a personal best practice I avoid making manual changes to the registry at all costs.

External Drive not mounting on Desktop but visible on sidebar

I have an external drive Iomega 1T that appears on the destop on Snow Leopard and all is perfect with it, but not showing on the destop in Lion (installed on another internal), it shows up on the sidebar and can access it from there without issues. Disk utilities shows it and can repair permissions and all but can't mount on desktop, my only option there is to unmount it, but is not even showing up on desktop to unmount it.
Do I need to reformat it to mount on desktop? Any help is appreciated.

A little bit, yes. What got me a little confused was that all of my 3 internal drives showed up, and I thought that by selecting it to appear on the sidebar would be visible on the desktop. Thanks again, Lion is very snappy on my early 2008 8 core 2.8, like having a new Mac .

External drive not working on iMac, but works on Macbook Pro

I have read a few different threads relating to this question, with no real luck of a permanent solution.
I have an external drive that works perfectly on my Macbook Pro. My new iMac will not show the drive though (both with the current software).
The drive itself shows a power light and appears to be running/powered by the USB port.
I have tried several ports.
It does not show in Disk Utility.
The option in settings is set to show the drive in finder and on the desktop (I have checked this).
I have tried restarting the iMac.
I have also had this problem after the iMac has been turned off overnight, and turned on in the morning (and then plugging the drive in after powering on).
I resolved this issue once by turning off the iMac, removing the power cord for a few minutes, and powering it up again.
I don't think it should be something I have to do every time I would like to use the drive though - It would be very irritating if I had to do that every time.
Any advice or options here?
The iMac has only been used since Christmas day, 2014 - and has had this problem since that day (in which i solved it by the turn off/unplug thing).
Sorry, I am aware this question has been asked a lot. I haven't come across anything that is giving me a long-term solution to this problem.
Happy new year!

Some USB-powered drives are just crappy. They require too much current from the USB and cause the bus to fail or the bus can't provide enough power for it to fully spin up. You can often hear or feel them clicking periodically (like once a second) as they are trying to spin up.
If this is the case, a powered Hub, external power supply, or Y-cable will be necessary to consistently use the drive.

USB external drive not readable by mac but readable by windows

Hi, I have a usb external drive (Seagate FreeAgentDesktop Media) which works fine with windows xp but cannot be read by the mac. I reinstalled the mac a couple of days ago because it was being very slow and I had a bunch of junk on it. Anyway, after that, it won't read the external drive. It will give me an error message saying that the disk is not readable by the computer. Sometimes it will give me the message saying that the drive was unmounted improperly by windows and for me to unmount it correctly. When I go back to windows, it's there, then I restart and go back to mac, it'll give me the message that the disk is not readable. I have 2 of these drives and both of them have this issue. I also tried disk warrior but it says that the file system cannot be rebuilt. I tried USB flashdrives and they work. I got all the data off of one of the external drives into the other and I couldn't format or even erase the drive because it says that the permission was denied. However, I could format it and erase it with the installation DVD. But I had the same result no matter what format they were in. I have very important data on these drives and I really need to be able to use them with both operating systems. Thanks a lot!

Hi Schmerz Meister;
If DiskWarrior say it can rebuild the disk about your only other alternative it to reformat it.
This will of course destroy all data on the disk so make sure you have copies of the data elsewhere,
Allan

External hard drive suddenly won't mount, but shows in Disk Utility.

Running OS 10.6.8... Disk Utility sees it and there's no issues when verified or repaired. The partition is grayed out and won't mount through Disk Utility. I've also tried mounting via Terminal, but same result. I've connected other drives, so I know it's not the wires or ports. When I turn the power on, it spins up and seems to be working properly. I don't have another mac to test it on. Any ideas would be greatly appreciated.
Here's the info from Disk Utility:
Name :     BACKUP
    Type :     Volume
    Disk Identifier :     disk1s10
    Mount Point :     Not mounted
    File System :     Mac OS Extended (Journaled)
    Connection Bus :     FireWire
    Device Tree :     IODeviceTree:/PCI0@0/RP05@1C,4/FWBR@0/FRWR@0/node@30e0f4e010a9d6/sbp-2@c000
    Writable :     Yes
    Universal Unique Identifier :     C3BC8998-F686-3A0F-A1AF-11260799EABA
    Capacity :     319.94 GB (319,937,773,568 Bytes)
    Owners Enabled :     No
    Can Turn Owners Off :     Yes
    Can Be Formatted :     Yes
    Bootable :     Yes
    Supports Journaling :     Yes
    Journaled :     No
    Disk Number :     1
    Partition Number :     10

You don't have a PowerMac if you have a Mac Pro. You don't have a PowerMac if you have Mac OS X 10.6. PowerMac is the name for the desktop professional Macs prior to mid-2006.   Two possibilities, the drive is dead, or the drive has a bad directory.   For a fee you can isolate either on my FAQ*:
http://www.macmaps.com/directoryfaq.html
* Links to some of my pages may give me compensation.

Bonjour drive not in 10.6 but show in 10.4

Similar Messages

Maybe you are looking for