Bonjour won't start for itunes update

I need help with installing itunes update, i get this message every time i try to update or install the new itunes---Service 'Bonjour Service' (Bonjour Service)failed to start. Verify that you have sufficient privileges to start system services--- I go into control panel and Administrative tools, then services and try to start bonjour but it wont start, i then close the update window and it starts but when i update itunes it says it fails to start even if i try to start it manually

At any point when there is a new version of iTunes for upgrade, I upgrade. When iTunes starts after the upgrade, it doesn't see other computers on my network, or our AppleTVs. Bonjour (mDNSResponder.exe) is running, but not working. I either 1) manually shut it down in my Task Manager & try to restart it by double clicking on the *.exe, or 2) stop & restart it in Services.msc. Bonjour still doesn't work in that AppleTVs & computers on our network cannot see each other. No sharing is happening. We stream a lot in our house, and when AppleTV isn't seeing a PC or Mac online, or vice versa, it's a problem (of course).
FYI: Just a few moments ago, I reran the latest iTunes installation file (downloading the exe straight from the Apple site), choosing the "Repair" option. Nothing changed. I should not have to uninstall & reinstall iTunes every time just to get Bonjour to kick in again. It seems that Bonjour never liked an iTunes upgrade, as it stops working & sharing when an upgrade happens.
I'm on Windows XP Pro SP3 with all the latest updates, etc.

Similar Messages

My MacBook won't start after iTunes update. I keep getting the spinning wheel. Any suggestions?

While trying to back up my iPhone 4S to iTunes, I received a message that iTunes had to be upgraded. I did the upgrade, but my computer won't start now. I get a white screen with the spinning wheel. (Like the computer is trying to boot). Any fixes?

AppleStar wrote:
Please verify you got this screen as well:
I had the same after updating fronm 10.7.1 to 10.7.2 tonight. Not even a re-install of the OS X 10.7 and Combo update to 10.7.2 helped. I think this time Apple messed up big time with the 10.7.2 update and some Mac Books (my case: MacBook 15" Mid 2009 = MacBookPro5,3)
If any Apple Support person reads this: Please get in contact with me. This is highly unusual!!
I think the best thing would be to call AppleCare 1-800-MY-APPLE.

Firefox won't start after an update. Firefox help says check virtualization settings. What is virtualization settings and where do you check them and for what? I have Windows XP

Firefox won't start after downloading update. I've reinstalled Firefox, still won't start. Help says check virtualization settings. What and where are virtualization settings? I have Windows XP.

This might be Zone Alarm since it provides virtualization. Please try the instructions to turn off virtualization in the following support question
http://support.mozilla.com/en-US/questions/880170

Error code: MobileMe Services has encountered a problem and needs to close - I get this message everytime i open Outlook and it slows down opening? This problem started when itunes updated

Error code: MobileMe Services has encountered a problem and needs to close
I get this mesage everytime i open Outlook and it slows down opening. This problem started when itunes updated. What do I do to solve this?

Hi turingtest2 (you pass, BTW): Thanks for the speedy reply. MobileMe doesn't appear in the list of programs which can be uninstalled. I tried the link you suggest: http://support.microsoft.com/mats/Program_Install_and_Uninstall but when I tried to "Run Now", I get the error message: " Troubleshooting cannot continue because an error has occurred... etc.... [code 80072F8F]" So googled this error & found a tool called (80072f8f) Repair Tool - I'm leery to download yet more stuff from non-microsoft sites -- any recommendations?

Check for itunes updates automatically

Hi I'd like to roll itunes 7.02 out to my business users as we intend to deliver work related content via podcasts, but I'd like to standardise on a version.
Is there anyway to uncheck the "check for itunes updates automatically" in the general preferences via the registry?
I have looked can can't locate this setting but it must be there somewhere.
Thanks in advance

You have Synergy running? What happens when you don't have it running?
Any utility, whether a widget, an application or whatever, that controls or gets status from iTunes has the potential to launch iTunes when you don't expect. The developers try to ensure it doesn't happen but it can still happen.

Update failed and now system won't work. Itunes update. Running Windows 7-64 Apple Mobile Device failed to start. Asks if I have priviledges

System was running fine until the update

Hello jackhennessy,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below as an administrator:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step. You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
I recommend the following article if you continue to receive an error:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thank you for using Apple Support Communities.
Best,
Sheila M.

Fix for iTunes update 11.1.4 issues

When will there be a fix from Apple for the installing issues with iTunes update 11.1.4?

Hello Weathertop44,
Did you remove iTunes and other Apple components in above given order if no then try doing that. After they are removed from your computer restart your computer once before reinstalling iTunes back on your computer. After you restart your computer locate the iTunes.exe setup file on your computer and right click the file using mouse right key and select the second option which says Run as Administrator (Windows Vista/7/8) or you will see just run as and once you select that you will see the account names and administrator written next to it (Windows xp) if you are already logged in with administrator account then select current account and click ok and start the iTunes installation and if you are not logged in as administrator then enter admin user name and password and click ok to start installation and let that complete. And still if you get an error then please do let us know what is the error code and what all step did you followed.
Note: If you are unable to remove Apple Mobile Device Support then you can skip that, if you see bonjour is in use by some other application then you can click on ignore and continue removing that and if you see that Apple Application Support is in use by Apple Mobile Device Support then choose the first option that you will get and click ok to remove Apple Application support.

OS won't boot after iTunes update

OS 10.5.8 end of day Software Update for iTunes. This morning system will not boot
- start up tone; Apple Logo & spinner, 1-2 minutes Apple logo changes to no entry symbol.
Tried to start with Shift key down, NG
Tried to start with PRAM keys, NG
Tried to start from system disc and C key, NG
Any thoughts??
Peter

D2C wrote:
Tried to start with Shift key down, NG
Tried to start with PRAM keys, NG
Tried to start from system disc and C key, NG
tried booting into _*safe mode*_ ?
JGG

BB z10 won't start up after updating to bb link

I accidentally dropped my phone on the floor, and it won't start up.
here are the following steps that i already did:
1. I already tried to update it on the bb link, after successfully updating i remove the usb cable, however it didn't start up. everytime i try to do a hard reset it automatically turns off, even when im seeing the blackberry logo on the screen. it goes off again.
2. i tried also to charge it first and then the blackberry name appears on the screen it will also automatically turns off and after that it will charge only and then again the blackberry name appears on the screen same thing happen again.
3. I tried to uninstall the bb link to my computer and install again the bb link then update it again, after the successful update. still no changes happen
4. I also tried to update the bb z10 os, in a hard way through internet explorer, nothing change still won't start up.
There's one thing that i've noticed everytime I plug the usb cable on my phone, through the computer and access the bb link, it will connect and then it will disconnect it goes on and on, as i seen on the screen. I updated the usb cable plugging in,thinking that can fix the problem but still nothing change.
I know that my bb z10 works fine up to now, because there is an instant that the bb logo appears on the screen completed loading and i can navigate it for a while like changing the language and connecting to a wifi, and the logo of my sim card appears on the screen, however it will take few seconds only, and then it will turn again to the same situation that occurs on my phone.
Please help me find a good solution regarding on my phone problem.

Since this occurred right after dropping your device it's probably damaged internally. Not much we can do here for that.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Blackberry 9220 won't start after os update

My blackberry 9220 was perfectly working for the past 8months, after finding out that there's a new update for os, i tried updating mine. I fell asleep while updating my os thy i didnt notice if the os was successfully updated bt wen i woke up at the middle of the night, my phobe won't start. When i tried charging it, the red led light lights up then the initial screen where you see the blackberry word and load bar below it starts bt only flashes and turns off. It keeps repeating. I tried going to a phone technician but they said they cannot reformat my phone because it doesn't turn on or completely turn on in the first place.. What should i do? Please help me.

Hi and Welcome to the Community!
You may need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Firefox won't start after windows update

After windows Updated my computer Firefox won't start. I tried a clean reinstall two times, won't work. When I tried to start the firefox the first time after booting my computer it comes with the following message.
XML Parsing Error: undefined entity
Location: chrome://mozapps/content/extensions/update.xul
Line Number 14, Column 1:
<wizard id="updateWizard"
^
Any Help would be greatly appreciated. I like firefox and I'm using it the last 7 Years.
Thanks
DK

I cheated a little bit and put the issue url in a working version of firefox:
chrome://mozapps/content/extensions/update.xul
What I got was a page that looked like this below and console:
blah blah parser:
<pre><nowiki> xml-stylesheet
xml-stylesheet
<wizard id="updateWizard" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul" title="Firefox Update" windowtype="Addons:Compatibility" branded="true" onload="gUpdateWizard.init();" onwizardfinish="gUpdateWizard.onWizardFinish();" onwizardcancel="return gUpdateWizard.onWizardCancel();" onclose="return gUpdateWizard.onWizardClose(event);" buttons="accept,cancel" pagestep="1" currentpageid="dummy" firstpage="true" lastpage="true">
<script type="application/javascript" src="chrome://mozapps/content/extensions/update.js"></script>
<stringbundleset id="updateSet">
<stringbundle id="brandStrings" src="chrome://branding/locale/brand.properties"></stringbundle>
<stringbundle id="updateStrings" src="chrome://mozapps/locale/extensions/update.properties"></stringbundle>
</stringbundleset>
<wizardpage id="dummy" pageid="dummy"></wizardpage>
<wizardpage id="offline" pageid="offline" next="versioninfo" label="Firefox is working offline" onpageadvanced="return gOfflinePage.onPageAdvanced();">
<description></description>
<checkbox id="toggleOffline" checked="true" label="Go online now." accesskey="G" oncommand="gOfflinePage.toggleOffline();"></checkbox>
</wizardpage>
<wizardpage id="versioninfo" pageid="versioninfo" next="mismatch" label="Checking Compatibility of Add-ons" onpageshow="gVersionInfoPage.onPageShow();">
<label>
Checking your add-ons for compatibility with this
</label>
<separator class="thin"></separator>
<progressmeter id="versioninfo.progress" mode="undetermined"></progressmeter>
<hbox align="center">
<image id="versioninfo.throbber" class="throbber"></image>
<label id="versioninfo.status" flex="1" crop="right"></label>
</hbox>
<separator></separator>
</wizardpage>
<wizardpage id="mismatch" pageid="mismatch" next="checking" label="Incompatible Add-ons" onpageshow="gMismatchPage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<listbox id="mismatch.incompatible" flex="1"></listbox>
<separator class="thin"></separator>
<label>
Firefox can check if there are compatible versions…
</label>
</wizardpage>
<wizardpage id="checking" pageid="checking" next="noupdates" label="Checking for Compatible Add-ons" onpageshow="gUpdatePage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<progressmeter id="checking.progress"></progressmeter>
<hbox align="center"></hbox>
</wizardpage>
<wizardpage id="noupdates" pageid="noupdates" label="No Compatible Add-ons Found" onpageshow="gNoUpdatesPage.onPageShow();">
<description></description>
<separator class="thin"></separator>
<hbox id="updateCheckErrorNotFound" class="alertBox" hidden="true" align="top"></hbox>
<separator class="thin"></separator>
<description id="noupdatesCheckEnabled" hidden="true"></description>
<vbox id="noupdatesCheckDisabled" hidden="true"></vbox>
<separator flex="1"></separator>
<label></label>
<separator class="thin"></separator>
</wizardpage>
</nowiki></pre>
I do not see much about coloum 14, but I am guessing this file is stored somewhere and its corrupt. Update.xul suggests that it is the update file. Do you still have this in your downloads folder? There are two places for update and for a clean reinstall:
[http://www.mozilla.org/en-US/firefox/new/] in a private window will give you a new install or you can choose from here: [https://www.mozilla.org/en-US/firefox/all/]
This is what the file should look like; [http://hg.mozilla.org/mozilla-central/log/7a2edc5171e6/toolkit/mozapps/extensions/content/update.xul] If you can copy and paste that file from a working browser we can see the issue, but it will just look the same as the error.
if you can replace the contents of the file locally with what it should look like it will fix the error, but who knows if there are other errors. May be best to delete the updater and save all the profile folder contents.

Apps won't start after latest update?

Hello,
I'm on an older 2006 iMac (the one without the black border) and I installed the latest update last night. Now I can't get Firefox, Safari, Mail or apps working properly. When I try to start an app it bounces up and down and then I can't remember what it says but it won't start. Any ideas how to fix this? I'm thinking of downloading Firefox and Safari on my sister's computer and then transferring them via my memory stick.
I also tried a restart. Last night I just shut it down and walked away and figured I'd deal with it when I get home from work today.

Hi, first I hope you have your important stuff backed up!!?
I would & always do Repair Permissions Before & after Updates, so I would try the RP ..
Then I would go the SMC route, specific for your model..
If after that you still have "issues" You may need to go the Archive & Install route..
Links:-
http://kb.iu.edu/data/aoxn.html
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1710
Hope this Helps.....L

Macbook won't start after recent update

Hi Guys,
Got a problem with a month old Macbook. Clicked for the recent updates and after it restarting the Macbook won't start up past the Apple logo and the rotating symbol beneath it.
Any ideas ? Thanks in advance
Nick

Hi Nick,
Check out these two articles:
http://support.apple.com/kb/TS1541 (Mac OS X 10.5: Troubleshooting installation, startup, and login issues)
http://support.apple.com/kb/HT2956 (Troubleshooting Mac OS X installation from CD or DVD)
Running Disk Utility and trying to verify the startup volume or starting up in Safe Mode would probably be the next best course of action.

X301 won't start after BIOS update

Hi all:
Well I've had my new x301 for about 2 months and it's given me nothing but troubles....Recently I found out my laptop won't come back on from hibernation (when you close the screen and open it up). So I downloaded and installed the lastest updates from Lenovo (including the recent BIOS update), restart computer, only to find out it doesn't start up anymore...black screen, thinkadvantage blue botton doesn't light up, no harddrive activity, only light on is battery and power...
I'm thinking maybe something went wrong with the BIOS update. Is there anything I can do to fix it (besides shipping this thing to a repair center which is a big hassle, or paying $200 for an on-site tech that might or might not solve the problem).
Any help is appreciated.

Hello all
I just updated my X301 (2776LEG) with the 3.12-1.05 bios. Now my laptop won't start up when running on battery, it powers on for a short while and powers off again. This cycling keeps on going (after 30min I switched it off!) but as soon as i connect the power adapter it boots fine. Seems like this bios update f****ed up the battery power part of the computer....
I tried the bios battery trick but it only worked on the first boot and after that the same problem is present.
I have added 2gigs extra memory and a ultrabay battery and it has been working 100% for about a year now. This error started right after the bios update...
Thought that a reflash of the bios would solve the problem but i cannot reflash the bios with the same bios version...
Any ideas ?
Kind regards
Tommy

Nokia 700 - won't start after FP1 update (112.some...

Just checked for updates today and I had a new OTA update available, yay! So I thought, "Finally, FP1 is here!" Here's what happened afterwards:
I charged my 700, created a back-up (never forget this step chaps), restarted it, took a deep breath, enabled Wi-Fi and let it update itself.
So first step went fine, it downloaded the update. Second, it rebooted and started loading the update files while displaying "Updating..." Next, it switched the label to a coups of gears and continued filling the progress bar. And then - the moment of truth - reboot.
Started initialising normally, then showed NOKIA logo, started the "Loading" animation with the five dots and... that was it. It keeps resetting while at the dots animation. After several tries it just gave up and remained blank. Waited some time and decided to wake it up - same scenario: starts init, several reboots, goes back to off.
Is it that the OTA SW updated screwed up my device? Really hope not!
Any words of advice from the community here before I go yell at somebody at one of my carrier's offices tomorrow morning?
Cheers!

Brief update - turns the phone is not "bricked" at all, problem is my SIM card.
It's ancient honestly but should that render the phone useless?
In short - tried booting without SIM at all - works OK. Tried with relatively recent SIM - OK. When tried with my old SIM (think I got it as a replacement to an even older price back in 1999 or 2000) - boom! Won't power up (keeps rebooting till it gives up at some point).
Although I'll easily remedy it by getting a new chip in the morning, I was wondering - is Belle FP1 not supporting old SIM cards?

Bonjour won't start for itunes update

Similar Messages

Maybe you are looking for