Boo Files in PSE 12

When I have ALL my photos open in Organizer/Media, the majority of them are showing Boo file names (back up) in the information Window (top right hand side).
Should this be happening to the majority of my photos.

You could well be right! Thank you.
On 1st loading of PSE 12 I ticked monitor new photos and bring them straight into organizer. I have my catalogue in the same directory as my photos.
Yesterday something strange happened when I opened Organizer I had a minimum of 5 copies per photo and a lot with up to 32 copies and on nearly 3000 photos that is one big big head ache.
I am pleased I have not put ALL my photos in Organizer so I am going to dump the catalogue and start again. So this time I will need it right!!!
Please tell me how can I find this 'Control Panel' and a scanner link.
UPDATE: This left me with 37,883 extra Photos in Organizer Media, at a cost of 931gb and 6 hours to get it cleaned up.
Message was edited by: Barry2009

Similar Messages

Using PSE 10 on Windows. Can no longer open files in PSE 10?

Have used PSE 10 successfully for quite awhile. Can no longer open files in this program. Choose, "open file" in PSE 10 and nothing happens.

I'd try
set myFilePath to POSIX file "/Users/Shared/ENGR/sketch/Artists/daleb/16.0/New1/ANNIE_SUB_COMPLETE /31.5-058.psd"
tell application "Adobe Photoshop CS6"
open alias myFilePath
end tell

Can't open any files in PSE 11

What is "NEF is not a valid win32 application when" when I attempt to open a Nikon NEF (raw) file in PSE 11
Also happens with JPEG.

Check on the PSE forum http://forums.adobe.com/community/photoshop_elements

Can't Open NEF RAW files in PSE 6

I cannot open NEF RAW files in PSE 6. I downloaded the plugin but that didn't fix it. Any suggestions?

There is another choice.
You can download the free Adobe DNG Converter, then convert your RAWs to DNG, and then open them in the PSE6 Adobe Camera Raw editor. This doesn't require you updating your software to PSE9, or purchasing anything.

Help opening raw files in PSE 13

Hello,
I upgraded PSE 13 from PSE 9. I was using PSE 9 with my Nikon 600 (because I couldn't open the 600 raw files in PSE 9) by using the Adobe DNG converter. This was working fine. Since upgrading I can't open any Nikon 600 raw files in PSE 13 nor can I open the converted DNG files. It only recognizes jpeg files. The "Open in Camera Raw" option in the File drop down menu is also grayed out and can't be selected. I've tried the "updates" option from the Help menu and ran the updates, shut down PSE13 and also shut down computer and it still isn't working. Wondering if I need to download a new ACR but can't find any that support the Nikon 600. Any help would be appreciated!

Thank you for your help.
When I do the "Help" drop down menu there isn't an option for "adobe plug-in" just "about plug-in" which doesn't list any options that seem to help when clicking on and none that say Camera raw.
I read the manual instructions for downloading and am currently downloading the zip file; it is about 70% done. Will this help?
This is what I'm referencing:
These instructions were originally written to install ACR 8.2 for PSE11, but have been updated to install ACR 8.3 with PSE12. While ACR 8.3 RC would work with PSE11, ACR 8.3 final will not. Only PSE12 will host ACR 8.3.
ACR 8.3 will work with PSE12 to open 70D files, but on an older Windows OS like Vista or XP there is no compatible installer, so a manual install is the only option. I should also say that the process outlined below does work on my Windows 7 64-bit computer, but I also have PS-CS6 and PS-CC installed on it, so it is possible that ACR 8.3 is dependent on something that wouldn't exist on a computer with only PSE installed on it, but someone else will have to confirm that.
I was able to get 70D files to open in ACR 8.3 on PSE12 by doing the following:
Download the ACR 8.3 for Windows update for PS-CC via the direct download link on the Adobe Blog - in the future this link will likely contain links to only newer versions of ACR but the process would be similar:
http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected
Unzip this downloaded setup.zip to a folder somewhere.
Inside the files from that zip is a folder called payloads \ AdobeCameraRaw8.0All-031213015928.
(Note that for future versions of PS and ACR the folder name will be different at the end, but the general format shold be similiar, and the important thing is that this is the folder without x64 in the path, because at this point PSE is a 32-bit program so we need the 32-bit version of the plug-in. At some point in the future, PSExx may be 64-bit and the approporiate file or files could be the 64-bit version for the 64-bit version of PSE. This zip file is for Photoshop which has both 32-bit and 64-bit versions so there are both versions of the plug-in as well.)
Inside that folder is another ZIP called Assets1_1.zip so unzip it somewhere.
Inside Assets1_1.zip there is a file called 1003. This is the largest or perhaps only file in that zip and is the plug-in you need.
Copy this 1003 file into the existing PSE12 camera raw plug-in folder:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 12\File Formats or for a 32-bit Windows OS, into: C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 12\File Formats
Rename the existing Camera Raw.8bi to Camera Raw_8bi_80 (in case something doesn't work and you need to rename it back, later).
Rename 1003 to Camera Raw.8bi
After these steps you have the ACR 8.3 plug-in installed in PSE12 but not the camera and lens profiles, so install those by downloading and installing the DNG Converter 8.3:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows

How do i get rid of grayed out EXPORT IN FILE on PSE 12? I am trying to export a panoramic photo file.

I am trying to export a panoramic photo file in PSE 12. but EXPORT under file is grayed out, how do i get rid of it being grayed out?

Hi,
This is a follow up to the dialog about "exporting" files back to LR5 after adjusting in PSE12.
In simple terms, as I am no expert at all, just a long time film photo pro always struggling with the digital technology, even though it is great to use, here is what I need to accomplish.
After transferring raw files from LR5 and creating a panoramic image file in PSE12, which shows on my editor next to the several files i created it from. Is it possible to send the newly created panorama file back to LR5 so I could use the print module there. If so, how, what steps need be taken.
Thank you for your help, I am in no rush, and am very appreciative of your imput.
Carl
My overall aim it to create the finest quality panoramic print for exhibition.

Why can't I download Canon S100 CR2 RAW files into PSE 10?

I am using PSE 10 with a Canon S100 camera. I am successful in downloading all of my jpeg files and RAW CR2 files from my older Canon Rebel, but not with the Canon S100 CR2 Raw files.
When first downloading from the Canon S100 camera into PSE 10 and later doing them manually, I receive the following messages: Nothing imported...files are not supported file types or alread in catalog. File damaged or in a format that cannot be included in the Elements Organizer.
These problems files, by the way, were automatically added to my Window's My Pictures catalog and are perfectly fine.

Thank you for the info. It worked great, once I was
able to get around a second problem that prevented updating
from within the PSE 10 application (error U41M1C212). That
problem was solved by disabling the MS Virtual WiFi Miniport
Adapter (located in the Network and Sharing Center control
panel). It just goes to show me once again, how complex
computer apps are and how much we all have to rely on each
other to get anything to work properly (frustratingly
enough, since the companies we paid good money to for
their problematic software are not very helpful). Thanks
again.
            Re: Why can't I download Canon S100 CR2 RAW files into
PSE 10?
            created by 99jon in Photoshop Elements - View the full discussion
Try opening a CR2 directly from a folder by right-clicking
and choosing open with Photoshop Elements editor, if that
dosent work, update the appliactaion (required for the
S100V)
In the Editor menu click Help >> Updates
Then install amera raw 6.7
            Replies to this
message go to everyone subscribed to this thread, not directly
to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4602882#4602882
            To unsubscribe from
this thread, please visit the message page at
http://forums.adobe.com/message/4602882#4602882. In the
Actions box on the right, click the Stop Email
Notifications link.
            Start a new discussion
in Photoshop Elements by email or at Adobe Forums
            For more information
about maintaining your forum email notifications please go to
http://forums.adobe.com/message/2936746#2936746.

Problems opening raw files in pse 8, using a canon 7D

Hi I am having trouble opening cr2 files in pse 8 using a canon 7D, it keeps giving me a error msg, "saying it can't read file" it open them fine from my 1000D same format etc. Has anyone got a solution?
Tahnks R.

Most likely you need to update your camera raw plugin to version 6.2
windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4807
mac (6.2 only works in the elements editor and not bridge, 5.7 for bridge)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4806
MTSTUNER

.NEF RAW file in PSE 11 will directly open in the edit modus

When I open a .NEF RAW file in PSE 11 it will directly open in the edit modus and skip the RAW editing window what is what I do not want. How to affoid this?

Are you on a computer that has a very small screen size?
What is the resolution of your computer screen, in pixels, width and height?

Can't open files with PSE 10

When I try to open a file with PSE 10, the app doesn't respond. I have owned PSE 10 for less than a month, and Adobe's support is impossible to access.

I am using XP SP3. I try to open any NEF file with PSE 10. There is no error message. The file doesn't open, and when I use Task Manager, PSE is shown as not responding.PSE works sporadically but not at the moment. There is another problem that may or may not be associated with this. When I try to rename some (but not all) files, I get a message that the file is in use by another program. This happens when no programs are active, and nothing shows in Task Manager.

How do import files from pse 12 to pse 13

Hi. how do I import files from pse 12 to pse 13 .. I was given 'full' version as opposed to update from 12 to 13

Hi trog1654,
You can take back up of the catalog in PSE12 and restore it in PSE13 or you can use convert feature(Catalog Manger(shortcut:Ctrl+Shift+C)-->convert) in PSE13. It will be a good option if you want to move all files from PSE12's catalog.
~Raushan

Open Nikon NRW Files In PSE 10

What do I need to do to open Nikon NRW (raw) files in Elements 10?

The Nikon Coolpix P7700 is newer than PSE10 can be updated to support. Specifically, the P7700 started to be supported with Adobe Camera Raw version 7.2. PSE10 only was updatable to ACR 6.7, I believe, so to read your P7700 files in PSE, you need PSE11.
An alternative is to convert the NRW files to DNG files using the current Adobe DNG Converter and open the DNGs in older camera-raw versions. You will want to be sure to set the DNG Compatibility options in the DNGC to something that ACR 6.7 can understand, which would be ACR 6.6, not the ACR 7.1 that it defaults to the first time you run it.
You can download the current DNG Converter, from the regular Adobe Updates page:
http://www.adobe.com/downloads/updates/

Open raw files in pse 10

why can't I open raw(orf) file in pse 10

Try answering my questions in your other thread
http://forums.adobe.com/message/6099595#6099595

How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?

How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?

Did you check the help page for Correct Camera Distortion and Process multiple file
Correct Camera Distortion: http://helpx.adobe.com/photoshop-elements/using/retouching-correcting.html#main-pars_headi ng_5
Process multiple files: http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f89cffc612e28adab65-7 fff.html#WS287f927bd30d4b1f89cffc612e28adab65-7ff6

Pathway problem when moving files in PSE

I use PSE 6.0 and recently had to reload my operating system (OS). After reloading my OS I reinstalled PSE 6.0 and restored my catalog to a new location on my hard drive. I had my catalog backed up onto DVD's. The restore worked and I went to link missing photos, b/c I did the PSE 'no no' and moved files outside of the PSE program. It appeared that the missing links were reconnected. I started to spot-check some of the file property locations and noticed that many of the photo properties had the restore location that I restored the catalog to. I did not want to keep the photo in this location, so I went to move these folders and files to my external drive where I keep my pictures (I have two drives: one for video and one for photos). When I try to move the files in PSE to my external drive it moves them to my external video drive instead. The problem is that when I follow the pathway it moved them to, I do not have this link on my video drive. The pathway, however, is identical to my photo pathway. For example. I have a picture with the property of C:/Documents and Settings/Amy/My Documents/Restore Adobe PSE 100111/My Picture Downloads/Pella Trip. I tried to move this file to my external K drive (which is my photo drive). In PSE I click on file then move then browse and moved the file to K:Micah's camera photos/2011/May/2011/05 07. In PSE when I go to verify that the file was moved to that drive, instead in properties it tells me that the file location is M (my video external drive) and lists the pathway as M:Micah's camera photos/2011/May/2011/05 07. When I go to START and click on that external drive to follow the pathway to find the photo, it is not on M. M does not even have the pathway to follow as I do not even have M:Micah's camera in that location. I have tried disconnecting my external drive M and tried to save the file from the C location to my K drive and then the file becomes an offline file and I have another problem. So then I tried to reconnect that particular file listed on M but since it's not really on M, I follow the K pathway name and find the file where I requested it to be saved which was K:Micah's camera photos/2011/May/2011/05 07. When I find the file and click on reconnect I get the message that the file already exists in the catalog. Then in the dialog box it says M:Micha's camera photos/2011/May/2011/05 07 was not connected to K:Micah's camera photos/2011/May/2011/05 07. When I click on ok to exit the dialog box my photo is then missing. I then can't do anything with it. The pathway in PSE won't move it b/c I can't link it. It says the file is on my M drive, but it really isn't. I don't know what to do next. I would like to move my photo files/folders from C (my hard drive) to K (my external photo drive). I do not know why PSE is moving them to M (my video drive) which doesn't take me to that file. I have searched the forums but have found no problems similar to this. I'm not sure what to do to fix this. Sorry this got so long...Can anyone help me?

Highlighting a batch of images and dragging from the PSE9 Media Browser to a folder in the left hand panel, located on external HDD works fine although I’m using Vista and Windows 7 and automatically invokes the elements Move procedure.
Make sure the new folder has a blue icon to indicate it is being managed in Organizer. If not right click on the folder and choose Import to Organizer.

Boo Files in PSE 12

Similar Messages

Maybe you are looking for