Book Configuration Data error

I was playing a game yesterday and it suddenly went into a black screen. Ctrl + Alt + Delete didn't work so I tried Alt + F4 and that didn't work either. I force powered off and when I tried to use it today a blue screen came up saying:
[Recovery
Your PC needs to be repaired
The Boot Configuration Data file is missing some required information.
File: \BCD
Error code: 0xc0000034
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings]
When I press Esc a black screen comes up saying this:
[Startup Menu
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup
For more information, please visit: www.hp.com/go/techcenter/startup]
Whenever I try F11 it goes to a black screen and then it goes back to the first blue screen. Please help! I'd rather not have to replace my entire hard drive.

I forgot to mention that my hard drive failed the quick test I ran (perhaps because of the bootup issue?).

Similar Messages

[Integration Engine Configuration Data] Error: No access to system landscap

Hi all,
When configuring Integration Engine Data (To go to 'Integration Engine Configuration Data' screen: Tcode: SXMB_ADM -> Choose: Integration Engine Configuration -> F8), we want to load Configuration from System Lanscape by choose F6, an error occur with message as below:
No access to system landscap
So that we can't load configuration from our System Landscape.
We have correctly configured other below:
     - We use http port for corresponding Integration Server.
     - Business System with role 'Integration Server' created correctly in SLD.
     - T-code SLDCHECK is all OK.
     - T-code SXI_CACHE is all OK.
Anyone can please help me correct this error ?
Point will be reward for any valuable answer,
Thanks a lot,
Vinh Vo

Please can you check if your RFC destination SAPSLDAPI and LCRSAPRFC are working both ABAP and Java stack.
just check the reply from Udo and jai's reply
R3 Connecte XI 3.0 Problem
also check page no 18
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

ORA-06550/PLS-00201 error while configuring data source

Hi,
My development platform is Visual Studio 2005, ODAC11g Release 1 (11.1.0.6.20), and Oracle 10g Release 2 database.
I tried to setup a sqlDatasource in my web page using drag and drop features
When I configure the sqlDatasource to use a stored procedure inside a package,
I notice that odp.net uses #0# as separator (instead of .) between package name and procedure name in Configure Data Source dialog box. Then when I clcik the Test Query button, I got following error.
There was an error executing the query. Please check the syntax of the command and if present, the types and values of the parameters and ensure they are correct.
ORA-06550: line 1, column 7:
PLS-00201: identifier 'PK_LOOKUP_TABLE#0#P_LIST' must be declared
ORA-06550: line 1, column 7
PL/SQL: Statement ignored
It looks like odp.net cannot locate PK_LOOKUP_TABLE#0#P_LIST.
Is there any workaround ?
Below is the stored procedure code. It compiles and runs without problem.
PACKAGE BODY pk_lookup_table
AS
/* Get a list of lookup table name */
PROCEDURE P_LIST (
O_CURSOR OUT sys_refcursor )
IS
l_cur sys_refcursor;
BEGIN -- executable part starts here
OPEN l_cur FOR
SELECT table_name
FROM all_tab_comments u
WHERE u.comments LIKE '%Lookup Table%'
ORDER BY 1;
o_cursor := l_cur;
END P_LIST;
END "PK_LOOKUP_TABLE";
On the sqlDataSource property sheet, if I click the Select Query property, the Command and Parameter Editor will open, then I can change the select command name to PK_LOOKUP_TABLE.P_LIST. Then if I run the application, I get another error.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'P_LIST'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Seems that it can locate the procedure.
In the Command and Parameter Editor dialog, I can add output parameter, but data type is restricted. There is no REF CURSOR datatype in the dropdown list.
How can I add output parameter with REF CURSOR type via IDE ?
Thanks for the time looking into this issue.
Mansion

Hi
Even I faced this problem while connecting to RMAN . But I feel your problem is different .
My issue was like this
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_BACKUP_RESTORE.SET_CHARSET' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
RMAN-04015: error setting target database character set to WE8MSWIN1252
Solution :
execute catproc.sql;

"error in accessing Star office configuration data"

Hi I'm posting this on behalf of someone who has Star Office 7 pre-installed on their PC. They are no longer able to open Star Office and are getting the message in the title above. Their message to me is below:
the exact message is Star office cannot be started due to
an error in accessing Star office configuration data
It is not a trial version it was with the comuter when I bought it from Aldi.
It is Version 7 Star Office. I have not recently added any more programs, or changed the way i am running the computer.
I cannot find this issue reported in the forum. i have found a similar open office issue in the faq.
OpenOffice.org fails to start, and the following error message appears:
OpenOffice can not be started due to an error in accessing the OpenOffice.org configuration data.
Please contact your system administrator.
The following internal error has occurred: Get Storage: "No Content".
The message often occurs because a file named Common.xcu becomes corrupted. In most cases, this file becomes filled with 0s. The problem seems to occur most often in Windows, possibly as a result of a crash or an improper exit while OpenOffice.org was open.
http://documentation.openoffice.org/faqs/various_topics/019.html
are they comparable? if so, could someone advise on transfering the recommended action to Star Office 7? Thanks! Nick

Thursday 15 February 2007
I am assuming that you are referring to a Windows system.
SO7 and OOo1.1.x are based on the same OOo build series - 645. Most of the time comments about one apply to the other, except in the case of SO7 commercial addons. (SO8 is 680).
The error message indicates that their is corruption in some kind in the User data found in
\StarOffice7\User.
The easy way to fix it is to back up the User folder, then delete it and let SO7 rebuild the user data.
You can try backing up and deleting Common.xcu only--it's found in two places, in both the Share and User folders.
\registry\data\org\openoffice\Office
I suspect the one in Share is used for the creation of the one in User, but I am not sure.
Phil

Configuration Validation error when booking an Sales Order.

Hi,
Getting an error when booking an sales order ie; "Configuration Validation error".
We are upgrading from 11.5.8 to 12.1.1 and this issue is critical. Please provide your valuable suggestion and advice.
Thanks in advance,
Asif

It seems you use configurator. Is this happening in production or in some test instance?
If it is a test instance, when was it cloned from prod? Did you clone the configurator instance at the same time?
1) You should publish the configurator model from the configurator developer to this new instance.
2) Also, it is possible that the selections made during order entry earlier are not valid anymore due to ECO/BOM changes or due to configurator rule changes. Open the configuration, make any selections if necessary and then click ok.
This will repopulate the order lines then you should be able to book the order.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant

An error was encountered trying to retrieve configuration data.

Hi All,
I need help on this please,
I am getting below error when I am trying to create DAD.
An error was encountered trying to retrieve configuration data.
Failed to initialize configuration parameter ApacheMainServer.. Entity not found. Resolution: Entity not found Base Exception: oracle.ias.sysmgmt.repository.plugin.advanced.apache.parser.ParserException Error scanning D:\OraHome_1\Apache\Apache\conf\httpd.conf. Start quote at line 346 column 12 does not have ending quote. Error scanning D:\OraHome_1\Apache\Apache\conf\httpd.conf. Start quote at line 346 column 12 does not have ending quote
Can anyone please help me how to avoid this?
Thanks,
Swathi.

Please paste the DAD entry here for review and the file name and version of your AS.
regards

When i install latest itunes gives an error the configuration data for this product is corrupt.how can i i fix it

hi there
i was trying to install latest itunes it gives error
the configuration data for this product is corrupt contact your personal support
how can i fix it and what is the reason for this error

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

T60 - Error while attempting to read the boot configuration data

Hello,
My wife just got an IBM-certified "pre-owned" T60 (type 2007 66U) running XP a few days ago. I updated all the drivers & patches and handed it over to her in good working order.
This morning when she turned it on, she encountered a message from the Windows Boot Manager:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1) Insert your Windows installation disc
2) Language settings
3) Repair your computer
If you do not have this disc....
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data
It almost goes without saying that we do not having our Windows installation disc as it was pre-installed by Lenovo. I've tried using F11 (after enabling it per other threads on this site) to access the recovery partition but it only takes me directly to the Windows Boot Manager error screen.
How do I go about repairing this BCD/Windows installation so we can continue our life?
Thanks...

You said that the computer is running Windows XP, but unless i'm wrong BCD (Boot Configuration Data) is a new feature starting with Windows Vista and also used by Windows 7. Windows XP use NTLDR (NT Loader) so if BCD is corrupted it sounds to me like someone tried to install Vista og Win7 on the computer or there might have been some leftovers from the previous owner. I don't think you have any other option but to use a Windows CD/DVD to fix this problem since you won't be able to boot from this computer. There might be some 3part utilities available that should be able to fix this, but i wouldn't know what that might be. My recommendation would be to get a Windows CD/DVD.
-gan

Bonjour64 error: "The configuration data for this product is corrupt. Contact your support personnel."

Have use WinRAR to pull out only Bonjour64 from iTunes 11.1.5 (and prior releases) to do an install of only Bonjour, as all other iTunes-related software loads fine (have used 11.1.4 and new 11.1.5). I get the error: "The configuration data for this product is corrupt. Contact your support personnel." Have tried everything suggested on net and this forum, including uninstalling everything, cleaning registry, disabling firewall, etc. Not worthwhile to reinstal Windows 7. What do I do?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Satellite A300D-135 - BIOS - System Configuration Data Read Error

After Booting a Satellite A300D-135 laptop the following error message appears:
<Several BIOS messages >
3070M Extended RAM Passed
512 KB L2 Cache
System BIOS shadowed
Video BIOS shadowed
ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
Fixed Disk 0: TOSHIBA MK2546GSX
Mouse initialized
ERROR
System Configuration Data Read Error
Press <F1> to resume, <F2> to Setup
After pressing F1 the machine boots Windows just fine, but the error message is quite irritating while it comes with a loud BEEP
I've tried the following things so far (in this particular order):
- Loaded BIOS defaults
- Flashed the BIOS with latest BIOS (2.80) for this model type
- Reinstalled windows with HDD format
All of these haven't worked.
I've seen the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but until now I haven't been able to find a working solution.
It might me a hardware issue, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work just fine in Windows, so this doesn't seem the issue). Another solution that is mentioned in some forums is replacing the cell battery. But because the laptop keeps time properly I don't think this is the case either.
Any ideas ?
Regards,
GJ

Hi buddy,
It seems that the power on self test has detected a hardware error... :(
I think such a problem like this you cant solve with loading the default settings in BIOS or with an update because its hardware based error.
In your case I would contact an authorized service provider. The guys can check your notebook because they have special diagnostic tools for Toshiba notebooks and access to all Toshiba databases I think.
You can find a list of them here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
Usually they work really fast and you will have a short repair time I think. In my case it did take only one week until I got my notebook back. :)

I tried to update itunes to the latest version yet it wont update. Im currently getting a error message,from Window Installer, configuration dat for this product is corru

I'm trying to update itunes but not very successful and im not making much progress. Im currently getting a message on the screen from Window Installer quoting configuration data for this product is corrupt while trying

The path 'C:\Documents and Settings\HP_Administrator\Local Settings\Application Data\Apple\Apple Software Update\iTunes.msi' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Stale data error while deleting a record

Hi
My design of this development is as follow...
1. Search Page in which users give some search criteria and results will be displayed in the results region on the same page. For each results record I have two buttons like 'Update' and 'Delete' so that users can delete the record or can update the record. For update i created a one more page where users can able to edit and save the data. I have two AM one for Search Page and one for Update Page.
Please find more details below.
intfEO based on PO_REQUISITIONS_INTERFACE_ALL
errorEO based on PO_INTERFACE_ERRORS
updateEO based on PO_REQUISITIONS_INTERFACE_ALL
VOs
intfVO based on intfEO and errorEO
updateVO based on updateEO
AM
intfAM based on intfVO
updateAM based on updateVO
Pages
searchPG based on intfAM
updatePG based on updateAM
Suppose I have one record in interface table with corresponding error record in error table.When users given the search criteria and hit enter they found a record. It means i have one record in the interface having one error record in the error table and both tables have same transaction id (primary key). So here user first try to update the record and it is working. After update he try to delete a record then I am getting below error. Please note that I am not getting this error when if i directly delete the record with out doing any update before delete. When ever users click on update icon then update PG will open and when users click on Apply button then data is getting updated in the database and page will forward to the search page.
Unable to perform transaction on the record.
Cause: The record contains stale data. The record has been modified by another user.
Action: Cancel the transaction and re-query the record to get the new data.
My UpdatePage Controller
/*===========================================================================+
|   Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA    |
|                         All rights reserved.                              |
+===========================================================================+
| HISTORY                                                                  |
+===========================================================================*/
package powl.oracle.apps.xxpowl.po.requisition.webui;
import com.sun.java.util.collections.HashMap;
import com.sun.rowset.internal.Row;
import java.io.Serializable;
import oracle.apps.fnd.common.MessageToken;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OADialogPage;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.form.OASubmitButtonBean;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageDateFieldBean;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
//import oracle.apps.fnd.oam.diagnostics.report.Row;
import oracle.apps.icx.por.common.webui.ClientUtil;
import powl.oracle.apps.xxpowl.po.requisition.server.xxpowlPOReqIntfUpdateAMImpl;
import powl.oracle.apps.xxpowl.po.requisition.server.xxpowlPOReqIntfUpdateEOVOImpl;
* Controller for ...
public class xxpowlPOReqIntfAllUpdatePageCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
        VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
   * Layout and page setup logic for a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
     xxpowlPOReqIntfUpdateAMImpl am = (xxpowlPOReqIntfUpdateAMImpl)pageContext.getApplicationModule(webBean);
      xxpowlPOReqIntfUpdateEOVOImpl UpdateVO =(xxpowlPOReqIntfUpdateEOVOImpl)am.findViewObject("xxpowlPOReqIntfUpdateEOVOImpl");
      String newvalue = (String)pageContext.getSessionValue("testValue");
      System.out.println("Transaction ID from processRequest UpdateCO from testValue field:"+newvalue);
      String transactionid = pageContext.getParameter("HashmapTransacitonid");
      System.out.println("Transaction ID from processRequest Hash Map in UpdateCO :"+transactionid);
      String errorcolumn = pageContext.getParameter("HashmapErrorcolumn");
      System.out.println("Error Column Name from processRequest Hash Map in UpdateCO :"+errorcolumn);
      String errormsg = pageContext.getParameter("HashmapErrormessage");
      System.out.println("Error Message from processRequest Hash Map in UpdateCO :"+errormsg);
      String readyonly = pageContext.getParameter("HashmapReadonly");
      System.out.println("Read Only value from processRequest Hash Map in UpdateCO :"+readyonly);
      if (transactionid !=null & !"".equals(transactionid)) {
     /* Passing below four parameters to the Update Page */
      Serializable amParams[] = new Serializable[]{transactionid,readyonly,errorcolumn,errormsg} ;
      pageContext.getRootApplicationModule().invokeMethod("executexxpowlPOReqIntfUpdateEOVO", amParams);
   * Procedure to handle form submissions for form elements in
   * a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
     OAApplicationModule am = pageContext.getApplicationModule(webBean);
      if (pageContext.getParameter("ApplyButton") != null)
        System.out.println("Inside ApplyButton method in UpdatePageCO");
        OAViewObject vo = (OAViewObject)am.findViewObject("xxpowlPOReqIntfUpdateEOVO");
        String transactionid = pageContext.getParameter("HashmapTransacitonid");
        System.out.println("Transaction ID from processFormRequest Hash Map in UpdateCO-ApplyButton method :"+transactionid);
        am.invokeMethod("apply");
          pageContext.forwardImmediately("OA.jsp?page=/powl/oracle/apps/xxpowl/po/requisition/webui/xxpowlPOReqIntfAllPG",
                                                 null,
                                                 OAWebBeanConstants.KEEP_MENU_CONTEXT,
                                                 null,
                                                 null,
                                                 true,
                                                 OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
       else if (pageContext.getParameter("CancelButton") != null)
        am.invokeMethod("rollback");
        pageContext.forwardImmediately("OA.jsp?page=/powl/oracle/apps/xxpowl/po/requisition/webui/xxpowlPOReqIntfAllPG",
                                               null,
                                               OAWebBeanConstants.KEEP_MENU_CONTEXT,
                                               null,
                                               null,
                                               true,
                                               OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
UpdatePageAMImpl.java
package powl.oracle.apps.xxpowl.po.requisition.server;
import oracle.apps.fnd.common.MessageToken;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OARow;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.inv.appsphor.order.server.XxapOrderHeaderVOImpl;
import oracle.jbo.Transaction;
// ---    File generated by Oracle ADF Business Components Design Time.
// ---    Custom code may be added to this class.
// ---    Warning: Do not modify method signatures of generated methods.
public class xxpowlPOReqIntfUpdateAMImpl extends OAApplicationModuleImpl {
    /**This is the default constructor (do not remove)
    public xxpowlPOReqIntfUpdateAMImpl() {
    /**Container's getter for xxpowlPOReqIntfUpdateEOVO
    public xxpowlPOReqIntfUpdateEOVOImpl getxxpowlPOReqIntfUpdateEOVO() {
        return (xxpowlPOReqIntfUpdateEOVOImpl)findViewObject("xxpowlPOReqIntfUpdateEOVO");
    /**Sample main for debugging Business Components code using the tester.
    public static void main(String[] args) {
        launchTester("powl.oracle.apps.xxpowl.po.requisition.server", /* package name */
      "xxpowlPOReqIntfUpdateAMLocal" /* Configuration Name */);
/* // Added by
    public void execute_update_query(String TransactionID) {
    xxpowlPOReqIntfUpdateEOVOImpl vo = getxxpowlPOReqIntfUpdateEOVO();
    vo.initQuery(TransactionID);
// Added by , this will not call bec changed the logic and so now the update button enabled on search results page
// and this method will not called
public void pageInEditMode (String transactionID, String readOnlyFlag, String ErrorColumn,
                                                                       String ErrorMessage)
    System.out.println("Transaction Id from pageInEditMode in UpdatePGAMImpl.java: "+transactionID);
    System.out.println("xxReadOnly from pageInEditMode in UpdatePGAMImpl.java: "+readOnlyFlag);
    // Get the VO
    xxpowlPOReqIntfUpdateEOVOImpl updateVO = getxxpowlPOReqIntfUpdateEOVO();
    //Remove the where clause that was added in the previous run
    updateVO.setWhereClause(null);
    //Remove the bind parameters that were added in the previous run.
    updateVO.setWhereClauseParams(null);
    //Add where clause
    // updateVO.addWhereClause(" TRANSACTION_ID = :1 ");
    //Bind transactionid to the where clause.
     // updateVO.setWhereClauseParam(1, transactionID); // this will not work bec it will start with zero from from 1
      updateVO.setWhereClauseParam(0, transactionID);
    //Execute the query.
    updateVO.executeQuery();
    xxpowlPOReqIntfUpdateEOVORowImpl currentRow = (xxpowlPOReqIntfUpdateEOVORowImpl)updateVO.next();
    // Assiging the transient varaibles
    currentRow.setxxErrorMessage(ErrorMessage);
    currentRow.setxxErrorColumn(ErrorColumn);
    if ("N".equals(readOnlyFlag))
          /* Make the attribute to 'False so that all fields will be displayed in Edit Mode because we used this
           xxReadOnly as SPEL */
           currentRow.setxxReadOnly(Boolean.FALSE);
   public void executexxpowlPOReqIntfUpdateEOVO(String transactionID, String xxReadyOnly, String ErrorColumn,
                                                                                          String ErrorMessage)
       System.out.println("Transaction Id from executexxpowlPOReqIntfUpdateEOVO in UpdatePGAMImpl.java: "+transactionID);
       System.out.println("xxReadOnly from executexxpowlPOReqIntfUpdateEOVO in UpdatePGAMImpl.java: "+xxReadyOnly);
       System.out.println("Error Message from executexxpowlPOReqIntfUpdateEOVO in UpdatePGAMImpl.java: "+ErrorColumn);
       System.out.println("Error Column from executexxpowlPOReqIntfUpdateEOVO in UpdatePGAMImpl.java: "+ErrorMessage);
     // Get the VO
     xxpowlPOReqIntfUpdateEOVOImpl updateVO = getxxpowlPOReqIntfUpdateEOVO();
     //xxpowlPOReqIntfUpdateEOVORowImpl updaterowVO = xxpowlPOReqIntfUpdateEOVO();
   //not working
   //    OARow row = (OARow)updateVO.getCurrentRow();
   //    row.setAttribute("xxReadOnly", Boolean.TRUE);
// updateVO.putTransientValue('XXXXX',x);
     //Remove the where clause that was added in the previous run
     updateVO.setWhereClause(null);
     //Remove the bind parameters that were added in the previous run.
     updateVO.setWhereClauseParams(null);
     //Add where clause
     // updateVO.addWhereClause(" TRANSACTION_ID = :1 ");
     //Bind transactionid to the where clause.
      // updateVO.setWhereClauseParam(1, transactionID); // this will not work bec it will start with zero from from 1
       updateVO.setWhereClauseParam(0, transactionID);
    // updateVO.setWhereClauseParam(1, ErorrColumn);
     //Execute the query.
     updateVO.executeQuery();
     /* We want the page should be read only initially so after executing the VO with above command
        and if you use next() it will go to the first record among the
        fetched records. If you want to iterate for all the records then use iterator */
        /* Using Iterator
         while(updateVO.hasNext()) { // this will check after execute Query above command if it has any rows
          xxpowlPOReqIntfUpdateEOVORowImpl currentRow = (xxpowlPOReqIntfUpdateEOVORowImpl)updateVO.next();
          /* above line next() will take the control of the first record */
      /*     currentRow.setxxErrorMessage(ErrorMessage);
             currentRow.setxxErrorColumn(ErrorColumn);
           if ("Y".equals(xxReadyOnly))
                  currentRow.setxxReadOnly(Boolean.TRUE);
         } // this while loop will loop till end of all the fetched records
     xxpowlPOReqIntfUpdateEOVORowImpl currentRow = (xxpowlPOReqIntfUpdateEOVORowImpl)updateVO.next();
// Assiging the transient varaibles
currentRow.setxxErrorMessage(ErrorMessage);
currentRow.setxxErrorColumn(ErrorColumn);
    /* Make the attribute to 'TRUE' so that all fields will be displayed as READ ONLY because we used this
       xxReadOnly as SPEL
       if ("Y".equals(xxReadyOnly))
              currentRow.setxxReadOnly(Boolean.TRUE);
//Added by and this methiod will get called from UpdatePG Process Form Request controller
     public void rollback()
       Transaction txn = getTransaction();
       if (txn.isDirty())
         txn.rollback();
    public void apply()
        //OAViewObject vo1 = (OAViewObject)getxxpowlPOReqIntfUpdateEOVO();
        //Number chargeAccountID = vo1.get
      getTransaction().commit();
      OAViewObject vo = (OAViewObject)getxxpowlPOReqIntfUpdateEOVO();
      if (!vo.isPreparedForExecution())
       vo.executeQuery();
SearchPG AM
package powl.oracle.apps.xxpowl.po.requisition.server;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.jbo.RowSetIterator;
import oracle.jbo.Transaction;
import oracle.jbo.domain.Number;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlErrosLovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlInterfaceSouceCodeLovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlItemSegment1LovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlOrgLovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlReferenceNumberLovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlRequestIdLovVOImpl;
import powl.oracle.apps.xxpowl.po.requisition.lov.server.xxpowlRequisitionTypeLovVOImpl;
// ---    File generated by Oracle ADF Business Components Design Time.
// ---    Custom code may be added to this class.
// ---    Warning: Do not modify method signatures of generated methods.
public class xxpowlPOReqIntfAllAMImpl extends OAApplicationModuleImpl {
    /**This is the default constructor (do not remove)
    public xxpowlPOReqIntfAllAMImpl() {
    /**Container's getter for xxpowlPOReqIntfAllVO
    public xxpowlPOReqIntfAllVOImpl getxxpowlPOReqIntfAllVO() {
        return (xxpowlPOReqIntfAllVOImpl)findViewObject("xxpowlPOReqIntfAllVO");
    /**Sample main for debugging Business Components code using the tester.
    public static void main(String[] args) {
        launchTester("powl.oracle.apps.xxpowl.po.requisition.server", /* package name */
      "xxpowlPOReqIntfAllAMLocal" /* Configuration Name */);
    /**Container's getter for xxpowlRequestIdLovVO
    public xxpowlRequestIdLovVOImpl getxxpowlRequestIdLovVO() {
        return (xxpowlRequestIdLovVOImpl)findViewObject("xxpowlRequestIdLovVO");
    /**Container's getter for xxpowlErrosLovVO
    public xxpowlErrosLovVOImpl getxxpowlErrosLovVO() {
        return (xxpowlErrosLovVOImpl)findViewObject("xxpowlErrosLovVO");
    /**Container's getter for xxpowlOrgLovVO
    public xxpowlOrgLovVOImpl getxxpowlOrgLovVO() {
        return (xxpowlOrgLovVOImpl)findViewObject("xxpowlOrgLovVO");
//Start Adding by Lokesh
//This method wil get invoked from the search results page Process Request
   public void rollbackItem()
     Transaction txn = getTransaction();
     if (txn.isDirty())
       txn.rollback();
//This method will invoked from Controller page when user click Yes on delete confirmtion page from Search Results Page
   public void deleteItem(String trasnsactionID)
     Number rowToDelete = new Number(Integer.parseInt(trasnsactionID));
     OAViewObject vo = (OAViewObject)getxxpowlPOReqIntfAllVO();
     xxpowlPOReqIntfAllVORowImpl row = null;
     int fetchedRowCount = vo.getFetchedRowCount();
   // System.out.print(fetchedRowCount);
     System.out.println("No of row fetched on delete method :"+fetchedRowCount);
     RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
       System.out.println("1 :");
     if (fetchedRowCount > 0)
         System.out.println("2 :");
       deleteIter.setRangeStart(0);
         System.out.println("3 :");
       deleteIter.setRangeSize(fetchedRowCount);
         System.out.println("4 :");
       for (int i = 0; i < fetchedRowCount; i++)
           System.out.println("5 :");
         row = (xxpowlPOReqIntfAllVORowImpl)deleteIter.getRowAtRangeIndex(i);
           System.out.println("6 :");
         Number PK = row.getTransactionId();
           System.out.println("7 :");
         if (PK.compareTo(rowToDelete) == 0)
             System.out.println("8 :");
           row.remove();
             System.out.println("9 :");
           getTransaction().commit();
             System.out.println("10 :");
           break;
             //System.out.println("11 :");
       System.out.println("11 :");
     deleteIter.closeRowSetIterator();
       System.out.println("12 :");
    /**Container's getter for xxpowlInterfaceSouceCodeLovVO
    public xxpowlInterfaceSouceCodeLovVOImpl getxxpowlInterfaceSouceCodeLovVO() {
        return (xxpowlInterfaceSouceCodeLovVOImpl)findViewObject("xxpowlInterfaceSouceCodeLovVO");
    /**Container's getter for xxpowlRequisitionTypeLovVO
    public xxpowlRequisitionTypeLovVOImpl getxxpowlRequisitionTypeLovVO() {
        return (xxpowlRequisitionTypeLovVOImpl)findViewObject("xxpowlRequisitionTypeLovVO");
    /**Container's getter for xxpowlReferenceNumberLovVO
    public xxpowlReferenceNumberLovVOImpl getxxpowlReferenceNumberLovVO() {
        return (xxpowlReferenceNumberLovVOImpl)findViewObject("xxpowlReferenceNumberLovVO");
    /**Container's getter for xxpowlItemSegment1LovVO
    public xxpowlItemSegment1LovVOImpl getxxpowlItemSegment1LovVO() {
        return (xxpowlItemSegment1LovVOImpl)findViewObject("xxpowlItemSegment1LovVO");
Search Page Controller
/*===========================================================================+
|   Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA    |
|                         All rights reserved.                              |
+===========================================================================+
| HISTORY                                                                  |
+===========================================================================*/
package powl.oracle.apps.xxpowl.po.requisition.webui;
import com.sun.java.util.collections.HashMap;
//import com.sun.java.util.collections.Hashtable;
import java.util.Hashtable;
//import java.util.HashMap;
import java.io.Serializable;
import javax.servlet.jsp.PageContext;
import oracle.apps.fnd.common.MessageToken;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OADialogPage;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.TransactionUnitHelper;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
* Controller for ...
public class xxpowlPOReqIntfAllSearchPageCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
        VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
   * Layout and page setup logic for a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    //Added by Lokesh
      OAApplicationModule am = pageContext.getApplicationModule(webBean);
     if (TransactionUnitHelper.isTransactionUnitInProgress(pageContext, "updateRecord", false)) {
           am.invokeMethod("rollbackItem");
           TransactionUnitHelper.endTransactionUnit(pageContext, "updateRecord");
   * Procedure to handle form submissions for form elements in
   * a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
         String userClicked = pageContext.getParameter("event");
         System.out.println("Event from processFormRequest in SearchPageCO :"+userClicked);
       System.out.println("Parametere Names are :- \t" + pageContext.getParameter("UpdateImage"));
       System.out.println("Parametere Names are :- \t" + pageContext.getParameter("event"));
     if (pageContext.getParameter("event") != null &&
         pageContext.getParameter("event").equalsIgnoreCase("Update")) {
         String ReqTransactionId=(String)pageContext.getParameter("transacitonidParam");
         String errorcolumn=(String)pageContext.getParameter("errorcolumnParam");
         String errormsg=(String)pageContext.getParameter("errormessageParam");
         String readyonly="Y"; //(String)pageContext.getParameter("readonlyParam");
         System.out.println("Requisition Transaction Id : "+ReqTransactionId);
         System.out.println("Error Column : "+errorcolumn);
         System.out.println("Error Message : "+errormsg);
         System.out.println("Read Only : "+readyonly);
         HashMap params = new HashMap(4);
         params.put("HashmapTransacitonid",ReqTransactionId);
         params.put("HashmapErrorcolumn",errorcolumn);
         params.put("HashmapErrormessage",errormsg);
         params.put("HashmapReadonly",readyonly);
         pageContext.putSessionValue("testValue",ReqTransactionId);
         //System.out.println("Transaction Id passing through HashMap :- \t" + ReqTransactionId);
         pageContext.setForwardURL("OA.jsp?page=/powl/oracle/apps/xxpowl/po/requisition/webui/xxpowlPOReqIntfAllUpdatePG",
                                    null,
                                    OAWebBeanConstants.KEEP_MENU_CONTEXT,
                                    null,
                                    params,
                                    true,
                                    OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
                                    OAWebBeanConstants.IGNORE_MESSAGES) ;
else if (pageContext.getParameter("event") != null &&
         pageContext.getParameter("event").equalsIgnoreCase("Delete")) {
    System.out.println("Inside Delete method in SearchCO");
    String deleteTransactionID=(String)pageContext.getParameter("deleteTransactionIDParam");
    System.out.println("Transaction Id in Delete Method :- \t" + deleteTransactionID);
// deleteTransactionID =""; //Makeing Null because dont want to show the transaction id bec users dont know about it
    //MessageToken[] tokens = { new MessageToken("MESSAGE_NAME", deleteTransactionID) };
    MessageToken[] tokens = { new MessageToken("MESSAGE_NAME", "") };
    OAException mainMessage = new OAException("FND", "FND_MESSAGE_DELETE_WARNING", tokens);
    OADialogPage dialogPage = new OADialogPage(OAException.WARNING,mainMessage, null, "", "");
    String yes = pageContext.getMessage("AK", "FWK_TBX_T_YES", null);
    String no = pageContext.getMessage("AK", "FWK_TBX_T_NO", null);
    dialogPage.setOkButtonItemName("DeleteYesButton");
    dialogPage.setOkButtonToPost(true);
    dialogPage.setNoButtonToPost(true);
    dialogPage.setPostToCallingPage(true);
    dialogPage.setOkButtonLabel(yes);
    dialogPage.setNoButtonLabel(no);
    Hashtable formParams = new Hashtable(1);
    formParams.put("transactionIdDeleted", deleteTransactionID);
    dialogPage.setFormP

Hi friend ,
In Search page i didn't do any update. and also search page is not a problem it's working fine. create page only the problem. In this page only throwing Stale data error exception.
Please give me more suggestion.
Thanks in advance,

PI 7.3 - AEX "unable to read configuration data" and login problems

Hello Friends,
after installation of AEX, i'm facing some problems.
1.I'm not able to login with any user, i created during installation wizard. So i cannot check any user in NWA -> User Administration.
2.Once more, while opening http://<host>:<port>/rep or http://<host>:<port>/dir, i get the following error message.
Can somebody help me?
I think, there is a problem with the users, which have been created during installation. How can i check this? Is there any chance?
Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
PI (http://<host>:<port>/dir/start/index.jsp). Below is the part of the error message that is showing up. Appreciate your suggestions:
Exception class: com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed
Message
Unable to read configuration data (ExchangeProfile/aii.properties)
Stacktrace
Thrown:
com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed: Unable to read configuration data (ExchangeProfile/aii.properties)
at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:220)
at com.sap.aii.utilxi.prop.api.AIIProperties.initServerMode(AIIProperties.java:518)
at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:97)
at com.sap.aii.ibdir.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:151)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:43)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
Please let me know if I am not clear.
Edited by: Clarence on Feb 6, 2012 3:28 PM
Edited by: Clarence on Feb 6, 2012 3:28 PM

hi,
>>>>Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
if you have java stack only there is no exchange profile anymore...
https://weblogs.sdn.sap.com/pub/wlg/28334
Regards,
Michal Krawczyk

IPad 3 and iPhone 4S won't synch with iTunes on Mac book pro. Error message says I need to have version 10.6.3 pr later for iTunes.

iPad 3 and iPhone 4S won't synch with iTunes on Mac book pro. Error message says I need to have version 10.6.3 or later for iTunes. Mac iOS version 10.5.8 and iTunes on Mac is 10.6.1. iPad and iPhone version is 6.0(10A403). When I check for updates on the Mac book pro it says software versions are up to date.
When I check for iTunes version 10.6.3 it looks like it is for snow leopard operating system which I am not on. How to I get my devices to sync with computer. Everything worked prior to iOS 6 upgrade on remote devices.

I'm having the same problem.
iPhone 4s won't sync with my Macbook Pro.
I iust updated the iPhone to iOS6 (thought it wasn't syncing before the update either).
Macbook Pro running Mac OS 10.5.8
iTunes 10.6.3 (i.e. latest update - which hasn't had an issues apart from syncing).
I tried 3 different USB sync cables. Still not syncing.
Do I really have to update my Mac OS to 10.6.8 in order to sync my phone ? I thought as long as you have iTunes 10.6.3 you're ok...
Is there a way to update to Mac OS 10.6.8 (or later) without wiping the hard drive and doing a new install?..
thanks

Book Configuration Data error

Similar Messages

Maybe you are looking for