Book editing - change a photo, book does not update

We are having a small problem. When editing our book, we double on some photos to edit them. Crop, color adjust, etc. Then we click done, and get sent back to our Book page.
Now about half the time the book preview does not update the image that we just changed. It seems to update the larger full page images more often than it updates the smaller images in the book layout. If I double click the photo again, I can see the change I previously made are still there, but they are not being reflected in the book preview.
So 2 questions, how do I force the book to update its photo preview? And if I print this will it use the edited photo, and not the version its showing me in the preview?
Assume this is just a screen display issue, and that the generated print will use the right assets, right?
This is in iLife '08 on Leopard on an intel Macbook.

Squeegy:
Welcome to the Apple Discussions. Try changing the layout, i.e. from frames with or without text to the other and then back. That may jump start the picture to display properly. It works for me when I do some cropping, like from landscape to portrait and the frame doesn't reset itself.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

Exporting catalog, making changes, then importing catalog does not update file movements and deletions

I export part of my master catalog to a laptop. I include the image files so I can edit the files at full res. After managing and editing files I import the catalog back into the master catalog. When importing I check to replace metadata, develop settings and negative files. I have been running some tests to be sure all my work is being captured in the master catalog by this process. I find that if I change develop settings or photo ratings this is detected when the file is imported and the data in the master catalog is updated properly. The surprise is that if I delete files or move files among folders in the exported catalog these changes are not detected and these changes are not updated inthe master catalog. It seems bizarre to me that such changes are not detected but I do not see how to get LR to recognize these changes and include them in the catalog update. Without this capability I don't see how to use catalogs to move part of a catalog to another computer for edits and file management and then move back to the master catalog.

There are various reasons why Lightroom works this way, but you'll need use pick flags to indicate photos to be deleted, and other metadata like colours or collections.

When I change state the UI does not update

I have some code that uses state changes to manage the buttons in a login screen:
        <mx:states>
                
                
                <mx:State name="{STATE_LOGIN}">
                        <mx:SetProperty target="{loginForm}" name="enabled" value="false"/>
                        <mx:SetProperty target="{loginButton}" name="enabled" value="false"/>
                        <mx:SetProperty target="{cancelLoginButton}" name="enabled" value="true"/>
                        <mx:SetProperty target="{statusLabel}" name="text"
                                                        value="{resourceManager.getString(ResourceNames.BUNDLE_NAME,
                                                        ResourceNames.LOGIN_CONNECTING_STATE)}"/>
                </mx:State>
The problem is that when I change the state by setting currentState to STATE_LOGIN the UI change does not happen right away. In fact it doesn't take place until the login event is complete, creating a race condition.
However, I've been able to work around this problem by explicitly setting the values of loginButton.enabled and cancelLoginButton.enabled in my program:
          loginButton.enabled = false;
          cancelLoginButton.enabled = true;
When I do this, the buttons are enabled in the right way.
Why does explicitly setting the button enabled flags work, but the state change, which should do the same thing, not?

Nope, that's not it. I just now tried changing the state values to constant values and it did the same thing. Also, BTW, the state eventually does change even with the binding expressions -- it just doesn't change until after the login is done (I also tried putting the call to the login in a callLater; made no difference). But, as I said, when I assign to the enabled fields the change happens right away.

Changing Handling unit weight does not update delivery header weight

Dears,
when we pack an item on a palett, system calculates tara-weight + material weight = gross weight and inserts this value to the likp-btgew. this is correct.
now it happens, that shipping departement uses a scale to get the 'real' weight of the handling unit. if the weigth differs, they change the loading weight of the HU. system calculates correct the new gross weight of the HU.
But when going back to delivery view, the likp-btgew is not updated. Do we miss a setting?
thanks a lot for your help!
Michael

wrong forum

Metadata Preset Edit - changing or removing keywords does not work

I can't find this documented so I sure hope this is not a duplicate. Sorry if it is.....
Existing metadata preset contains various fields populated and checked including keywords both populated and checked. When I edit the preset by either a)removing and unchecking the keywords or b)changing the keywords and leaving it checked followed by Done followed by Save to "Save changes to the preset Preset Name? ..... the changes or removal actions are ignored such that if I immediately Edit the preset, the keywords are back the way they originally were.
Changes to any other fields in the preset are reflected properly upon subsequent edit. Only keywords seem to be "not changeable or not removable".

You can use this to report a bug:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Change Menu in Photoshop does not update correctly in Encore CS4

Hi there,
I've read some threads that there seems to be a problem with saving/updating psd menus in encore that have been changed/edited in photoshop. I heard three saves was the magic number.
Well, I've saved over a dozen times, and I can't seem to get the change to come through to encore. to make it even more confusing, some of the changes leak through, but not all of them.
I have this Chapter's menu and I wanted to edit the highlight of a selected chapter - and so I changed it to a red bar with a outer glow in fx in PS.
This is what it looks like in PS.
I go into encore - saved probably a dozen times, (and yes, with small changes like showing/hiding layers to actually save) and waited for over an hour to come through, and when I go to Encore it did ask me if I wanted to overwrite the file from PS - and clicked yes.
Well, I go under the preview in encore to preview the DVD and this is what it looks like:
That shows up blue now but with no Outer glow on it. The weird thing is that one of the chapters (2nd to right one in the bottom) - that one has turned red, but doesn't show the glow either - just shows up like the one that shows blue on top except that it's red.
What am I doing wrong?

Stan,
I do not do a Save As - I always hit ctrl + S to save it.
If I do it incorrectly, then how else should I be doing it?
Giorgio,
"I just would add that sometimes I see some little "discrepancies" between the files created in Photoshop and what I see in Encore, but this is just an Encore PREVIEW matter, nothing else."
I thought of that too and so I built to a DVD folder on my computer and it was the same way there - as far as the color of the highlights go.
What I did was double click on the layer thumbnail to bring up the 'Pick a solid color' box, and then the sliders on the right, I moved them all the way to the top, and then click on the top right hand corner, but not all the way in the corner, just in the general top right hand side. I wasn't so particular that I had each color code exactly the same because it was close enough for me to just have it up there in that side - you can't really tell the difference in the colors at that point anyway - at least not without holding them side by side.
Last night I double checked that everything was saved (Ctrl S) and then I shut everything down, including the computer, and this morning when I fired it up again - opened EN first with the project, right click 'edit menu in PS' and now in PS I see that it still has all those bars red (but don't show that way in the Preview in EN) but all the outer glow fx were disabled....
Now I'm still not quite sure what was meant by this: "Have the highlights you created the same color?
If not, you had to use (=1) (=2) (=3) keys before the layer name to display different colors in Photoshop application."
I understand you to mean the filename "(=1) highlight" numbers would have to be changed, right? Why is that? How come I can't just go into PS and set the color as I want - even if they are all different?
Ok, I just went into PS and went through all the highlights and copy&paste the color # code to make sure they were all exactly the same on each one, then I also went into the glow fx on each one and did a copy&paste there (slightly diff color then the thumbnail one) to make sure they were all the same as well.
Save 3 times - go into EN and no warning message, but a blink which I took meant it updated, and then I went into Preview, and there you have it - they were all red!
BUT there was no glow to them.
I went back into PS and on each one, all the fx were disabled.
Why does it do that?
How can I get fx to carry through into Encore?
Please excuse my ignorance, I'm expecting to learn a lot!
Thanks everyone!

Photo library does not update on iphone when synced

the latest images from iphoto do not sync with the iphone/ipad when plugged in to Imac.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I have a different Apple id on my PowerBook from that on my iMac and iPad. Photo Stream does not connect to my Powerbook. How do I change the Apple id in iCloud on my PowerBook? Will this link all 3 machines to PhotoStream?

I have a different Apple id on my PowerBook from that on my iMac and iPad. Photo Stream does not connect to my Powerbook. How do I change the Apple id in iCloud on my PowerBook? Will this link all 3 machines to PhotoStream?

You can't simply change the details.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)

When I save my book in iBooksAuthor as .ibooks, it does not open on the Intro Media page. How can I be sure it opens on the first page?

When I save my book in iBooksAuthor as .ibooks, it does not open on the Intro Media page. How can I be sure it opens on the first page?

hello suffaman46, please refer to the documentation provided by yahoo for this issue: http://help.yahoo.com/kb/index?locale=en_US&y=PROD_ACCT&page=content&id=SLN2896

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

I have tried to delete a book from my bookshelf but it does not go away

I have tried to delete a book from my bookshelf but it does not go away.

Settings-iBooks-show all purchases=off?

There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I'm in the UK.

There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I was told you could download kindle books from amazon straight to iPad if you download the kindle app first. Do I have to do it onto my computer and then sync it onto iPad? surely not?

Can you go here:
http://www.amazon.co.uk/Kindle-eBooks/b/ref=amb_link_173148087_8?ie=UTF8&nav_sdd =aps&node=341689031&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-1&pf_rd_r=1GDPPW8ZCN9Y 9NQF5VV0&pf_rd_t=101&pf_rd_p=365751407&pf_rd_i=468294
and not log on. See what you can do.

I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

I have iMove 11 and photos turn very dark when I drag them into the project. Changing colour white balance does not fix the problem.

I have iMove 11 and photos turn very dark when I drag them into the project. Changing colour white balance does not fix the problem.

Thanks for your no help line.

Update ical and address book on iMac does not update iPhone or ipad

I have updated my ical and address book on my imac, but it is not updating my iphone or ipad, I have activated icloud on all machines, can anyone help please. Have looked at the forum, but cannot find my issue specifically. Regards

On the iPhone and iPad, tap Settings > iCloud
Switch Calendars and Contacts off then back on then reset the devices.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
On the iMac open System Preferences > iCloud
Deselect the boxes next to Calendars and Contacts then restart your iMac.

Book editing - change a photo, book does not update

Similar Messages

Maybe you are looking for