Book format error

First time I uploaded this PDF to my iPad, it showed the "book format error" message.. i deleted it and then reuploaded.. IT WORKED, but only for a while, when syncing other books, it came back to the book format error thing.. what could be happening and how to solve this issue? it's a random school pdf thing, it shouldn't be copyright protected or something.

I checked a few of the other .pdfs I have in iBooks - no problem.
The issue occured with the 2 I created and imported today.
Created and uploaded them the same way as I have always done.
They synched fine to iPad, only when I went to open the files in iBooks, I got:
"Book Format Error - book can not be opened because format is not recognized or invalid"
Format is .pdf has always worked, still works on others, but not these two.
I don't know why or what is different this time.

Similar Messages

I downloaded a new book and when i try to open get book format error. How do i resolve

I downloaded a new book and when i try to open get book format error. How do i resolve

Hello
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Using Game Center
http://support.apple.com/kb/ht4314
If the issue persists, or certain features of a game aren't working as expected (leaderboards, achievements, and so on), use the App Store to report the problem to the developer
Best of luck,
Mario

I've purchased numerous books through itunes and now I'm unable to open ibooks; I get a "book format error, delete and redownload" which I've done numerous times with negative results.

I've purchased numerous books through the itunes store in which I was able to read. Now I'm unable to open some of the ibooks that I've purchased, I get an error message...book formate error, delete and redownload, which I've done numerous times with negative results. What are my options?

within the receipt that Apple sent to you via email is a Report a Problem link. use that link to report your issue.
also you could try a basic reset and see if that resolves your issue. hold down the Lock button & Home button at the same time for ~15 seconds, the iPad should then perform a reset.

Ff_5 Formatting error in the field COBL-KOSTL

When automatically posting bankstatements we have several searchstrings in place.
Most of them post against a bookingrule, but in this case I have a posting on a costcenter as well.
I created two equal searchstrings, one for the bookingrule and one for the costcenter.
When executing FF_5 SAP only books in area 1 and not in area 2. The error message states:
00: 298 Formatting error in the field COBL-KOSTL.
The costcenter is an active one, it is also in OKB9 linked to the cost account number.
Profitcenter is default.
What does this message mean, and how can I find out what I did wrong? I am absolutely sure I have made no typo when entering the costcenter in the mapping area of the searchstring.

Hi Siermann,
How are you mapping these two in search string , could you tell me ..?..
Seems to be that cost center is mandatory field but the field is suppressed in GL.
Thanks,

How can I print a pages document in book format ..order?

How can I print a pages document in book format ..order?

This is usually a function of the driver you're using. Have you looked in the various PDEs for black and white or grayscale? What kind of printer are you using?

Bex Analyser : Date Format error.

Hi All,
We are facing date format error, while running the query in Bex analyzer.
We have one column in report i.e Net Payment Date, so when we run the query in analyzer the single date like "5-6-2010 is getting swapped like 6-5-10 & year also showing two digits i.e instead of 2010 it shows 10" & date like "12-09-2010 is coming perfectly."
Means the date which is in single digit we are facing this problem like 1 to 9 & the dates which are 10 & above showing perfectly.
In RSRT the query showing proper result, so i don't think it's BI problem.
The regional setting is DD-MM-YYYY & Date separator is '-' & we don't want to change this format.
Is there any SAP note or any solution for this..??
All the replays are gr8ly appreciated.
Thanks,
Santosh

Hi Santosh,
how about web display? is it ok? for me it seems more an Excel problem, so maybe you should check if there is special formatingin this.
Regards,
Anass

I'm creating a book format in Pages. I want the page count to be 1 on the first page of chapter one after the title page, table of contents, etc.. How do I do that?

I'm creating a book format in Pages. I want the page count to be 1 on the first page of chapter one after the title page, table of contents, etc.. How do I do that?

That is not the issue.
Pages/OSX does not save files with crop marks and bleeds.
It also by default saves transparency, which is involved in a lot of Pages' better features, at a rubbishy 72 dpi resolution.
It also makes it extremely difficult to maintain mono-color like black only text, has no spot color and makes color management opaque.
It really is only meant for amateur publishing and printing to your desktop printer.
A commercial printer who is willing to use and print from Pages may have better results but at the cost of considerable micro-management which defeats the point of this "cheap" solution.
Peter

Trying to convert a pdf to a word doc using Acrobat XI Pro. I am getting formatting errors and scrambled text, especially right below headings. Not all headings affected, just some, but all the same paragraph tag. Any ideas?

I am trying to convert a pdf to a word doc. The pdf was created in Framemaker. I am using Acrobat XI Pro and getting formatting errors and scrambled (or missing) text, especially below a heading. Any fixes?

Hi pakbecker,
Please try updating to Acrobat 11.0.7 and check.
In case you still face issues, i would like to have a look at th doucment.
Send me an email at [email protected]
Regards,
Rave

FF_5 - Import Bank Statement, Err: Formatting error in the field COBL-KOSTL

Hi
When importing the bank statement I'm getting the error
Error: (00 298) Formatting error in the field COBL-KOSTL ; see next message
Why is it doing this? In OKB9 I have the GL Account and the cost center assigned. It is the ne GL that is giving this problem, in the classic GL I do not have this problem.
Thanks in advance

Hi
No, it is not that. For some reason in the new GL it does not seem to determine the cost centers and profit centers as usual.
For exampl to allocate the Profit Center for Balance Sheet Account I used to use 3KEH in the classic gl but in the New gl we must use FAGL3KEH.
Now with cost center i'm having the same problem, does not determine the cost center when importing the bank statement.
Can someone help me.
Thanks in advance
Edited by: Louis De Gouveia on Mar 3, 2009 7:07 AM

Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal

Hi All,
I am trying to implement Oracle 10g RAC on my laptop using vmware and openfiler software . But while executing the command
#mkfs.ocfs2 -b 4K -C 32K -N 4 -L oracrsfiles /dev/iscsi/crs11/part1
I am getting the error
Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
Please anybody can help me to resolve this problem.
Thanks in Advance.

How large is the device that you are formatting?
The default journal size depends on the type specified. If none specified,
then it assumes "mail" which sets the default journal per slot to 256M.
If database type, default is 64M.
Use "-T database" to specify database type, etc.
BTW, one can always override the defaults. Say "-J size=16M" to make
a smaller journal.
man mkfs.ocfs2 and the user's guide has more.

After Effects CS6 format error 45::35

I'm getting "After Effects Error: Photoshop File format error 1. (45::35)" in AE CS 6 with .IFF's from Maya. I know this is nothing new, this problem has been around for a loooooong time.
We like here at ABC like .IFF since it's native to Maya and a small file with alpha.
Close and open AE and it works for a while then the error appears, rather than me doing a work around and converting to another format, my question is: When do you think Adobe will have a solution?
Ray

The better question actually is: When will Autodesk stop "enhancing" the IFF format? There really is two sides to the equation and as long as Autodesk implement undocumented changes (including trivial stuff like incrementing the IFF version number in the metadata), any other company can only paly catch-up. Also the format has this odd "quality" where byte errors do not necessarily affect the visible data, so rendering errors may not actualyl show up unless you open the files in anotehr program. I understand your rationale for using it, but it really is not the best format for heterogenous workflows involving apps from different vendors. TIFFs are so much nicer...
Mylenium

Invalid Keystore Format error

we need to configure an SSO from SAP portal and a third party website by passing encrypted userid as url parameters.
To configure the SSO I have received the public key of the third party and able to access it from server location. Now I have to access priavte key of the SAP Portal certificate and sign the UserId and pass it as url parameter. I have gone through many blogs and written code as below which is giving Invalid Keystore Format error.
My question is
1. What should be passed to FileInputStream?
As of now we are passing the .cer file which is stored as part of project.
Below code is throwing error at ks.load() method.
String fielPath1 = request.getPublicResourcePath()+"/SAPLogonTicketKeypair-cert1.cer";
FileInputStream ksfis = new FileInputStream(fielPath1);
KeyStore ks = KeyStore.getInstance("JKS");
ks.load(null, sPass.toCharArray());
BufferedInputStream ksbufin = new BufferedInputStream(ksfis);
ks.load(ksbufin, sPass.toCharArray());
PrivateKey priv = (PrivateKey) ks.getKey(alias, kPass.toCharArray());
Error is:
Invalid keystore formatsun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:633)sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)java.security.KeyStore.load(KeyStore.java:1185)am_sso_apc.doContent(am_sso_apc.java:132)com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:213)
Please let me know how to pass the filepath to extract the priavte key .
Regards,
Satish

I found the solution. As follows:
keytool -list -keytool keytoolfile -storetype jceks

APEX on Oracle XE PDF printing produces: Format error: not a PDF or corrupted.

Dear fellow Apexers and Oracle Gurus,
I have the following configuration:
Oracle XE 11gR2
APEX 4.2.3.00.08
Listener 2.0.5
On this setup I can create workspaces and applications as I please.
Now I want to print a PDF report.
I have set up PDF printing to "Oracle Listener" in the "manage Instance" settings in the instance administration.
I have created a classical report on the EMPLOYEES table (Select * from EMPLOYEES)
and enabled PDF printing in the "Printing" area of the "Print Attributes" of the page.
When I run the page I do get the "print" link on the bottom of the page.
Clicking the link does produce a .PDF but showing this file triggers an error in my PDF reader: Format error: not a PDF or corrupted.
Opening the .PDF file in a text editor reveals the corrupt content.
%PDF-1.4
%ª«¬
Unknown function: gatherContextInfo
The same setup works fine and produces the expected PDF file with the report on the following configuration:
Oracle Vbox with Developer days image;
DB 11gR2
Upgraded to apex 4.2.3.00.08
Listener 2.0.5
Since the PDF shows "unknown function" I suspected the XE configuration to lack some of the necessary rights, maybe I forgot to configure the ACLs correctly.
So I compared the ACL info on both configurations. Alas,.. on both machines they return the same result..
SQL> SELECT * FROM DBA_NETWORK_ACLS
HOST         LOWER_PORT    UPPER_PORT    ACL
localhost    null          null           /sys/acls/local-access-users.xml
*            null          null           /sys/acls/power_users.xml
SQL> select * from dba_network_acl_privileges
ACL                                  PRINCIPAL      PRIVILEGE   IS_GRANT    INVERT
/sys/acls/local-access-users.xml     APEX_040200    connect     true        false
/sys/acls/power_users.xml            APEX_040200    connect     true        false
Anyone any idea why this works fine on the Vbox and not on the local XE configuration?
Any hint or answer as to where the problem might be is appreciated
TIA
Wouter

I'm having the same issue. I'm using Oracle XE 11gR2 as well. I've tried with APEX 4.2.2 and APEX 4.2.4. I have set up the Oracle Listener in instance settings and set the report to print and I have the same result as you. Have you had any progress yet?
Thanks
Jason

Formatting error in email attachment

Hi experts,
I have encountered a problem regarding formatting errors of the attached file.
the attached error file contains
[ S y s t e m ]
N a m e = I D E
D e s c r i p t i o n = I D E S M a n i l a
C l i e n t = 2 5 1
[ U s e r ]
N a m e =
[ F u n c t i o n ]
T i t l e = A B A P r u n t i m e e r r o r s
C o m m a n d = S T 2 2
but in the contents_bin table
[System]
Name=IDE
Description=IDES Manila
Client=251
[User]
Name=
[Function]
Title=ABAP runtime errors
Command=ST22
as you can see there were no spaces between the letters in the table but in the output there are spaces have been generated.
Please help me with this problem. i need no generate a file the same as what i placed in the table..
points will be rewarded if successful
Edited by: Durairaj Athavan Raja on Jun 22, 2008 10:07 AM

do not post duplicate threads. i have deleted the other one. and
points will be rewarded if successful
the SDN angels dont answer just for points. if you find a answer userful, its your duty to award points to say thanks. dont use that as a mean to woo users.
Regards
Raja

Network message format error on Site Studio Designer

Hi all,
I am facing a very wierd issue in Site Studio. I have enabled accounts on the content server. When i use the content server User interface, i can check in any content using the standard check in form with or without specifying the account for it. In the case of Site Studio Designer, when i try to create a new asset/ content( basically check in anything) , it checks in the content successfully when the account metadata field is left blank. If the account field is specified, it gives me an error sayin :
Failed to check in file from location "".
(Network message format error).
When i checked the content server logs, it says:
The request was not processed by the Service handler because of a protocol error.
The request headers parsed from the request are:
{HTTP_USER_AGENT=Site Studio Designer, REQUEST_METHOD=POST, IdcAuthChallengeType=http, SERVER_NAME=punitp97194d.ad.infosys.com, SERVER_SOFTWARE=Apache/2.2.2 (Win32), HTTP_CGIPATHROOT=/idc/idcplg, HTTP_HOST=punitp97194d.ad.infosys.com, GATEWAY_INTERFACE=CGI/1.1, REMOTE_ADDR=10.76.135.190, SERVER_PROTOCOL=HTTP/1.1, SERVER_PROTOCOL_TYPE=NONE, IDC_REQUEST_AGENT=webserver, REMOTE_HOST=10.76.135.190, HTTP_CONNECTION=Keep-Alive, SERVER_PORT=80, HTTP_COOKIE=viscnt=3; IntradocLoginState=1; IdcTimeZone=Asia/Calcutta; IdcLocale=English-US; IntradocAuth=Internet, CONTENT_TYPE=text/hda, CONTENT_LENGTH=617, IDC_REQUEST_CTIME=1250602911, HTTP_INTERNETUSER=eBiz_Designer, SCRIPT_NAME=/idc/idcplg, PATH_TRANSLATED=D:/oracle/ucm/server/weblayout/idcplg}
Network message format error. Unable to parse browser environment or content item. Unable to parse properties. Name-value pairs are missing an '='. Unable to parse properties. Name-value pairs are missing an '='. [ Details ]
An error has occurred. The stack trace below shows more information.
!$The request was not processed by the Service handler because of a protocol error.<br>The request headers parsed from the request are:<br>{HTTP_USER_AGENT=Site Studio Designer\, REQUEST_METHOD=POST\, IdcAuthChallengeType=http\, SERVER_NAME=punitp97194d.ad.infosys.com\, SERVER_SOFTWARE=Apache/2.2.2 (Win32)\, HTTP_CGIPATHROOT=/idc/idcplg\, HTTP_HOST=punitp97194d.ad.infosys.com\, GATEWAY_INTERFACE=CGI/1.1\, REMOTE_ADDR=10.76.135.190\, SERVER_PROTOCOL=HTTP/1.1\, SERVER_PROTOCOL_TYPE=NONE\, IDC_REQUEST_AGENT=webserver\, REMOTE_HOST=10.76.135.190\, HTTP_CONNECTION=Keep-Alive\, SERVER_PORT=80\, HTTP_COOKIE=viscnt=3; IntradocLoginState=1; IdcTimeZone=Asia/Calcutta; IdcLocale=English-US; IntradocAuth=Internet\, CONTENT_TYPE=text/hda\, CONTENT_LENGTH=617\, IDC_REQUEST_CTIME=1250602911\, HTTP_INTERNETUSER=eBiz_Designer\, SCRIPT_NAME=/idc/idcplg\, PATH_TRANSLATED=D:/oracle/ucm/server/weblayout/idcplg}<br>--------------<br>Network message format error.!csUnableToParseBrowserEnvironment!syUnableToParsePairs!syUnableToParsePairs
intradoc.data.DataException: !csUnableToParseBrowserEnvironment!syUnableToParsePairs
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:187)
Caused by: java.io.IOException: !syUnableToParsePairs
     at intradoc.serialize.DataBinderSerializer.readProperties(DataBinderSerializer.java:625)
     at intradoc.serialize.DataBinderSerializer.parseProperties(DataBinderSerializer.java:601)
     at intradoc.serialize.DataBinderSerializer.parseReaderData(DataBinderSerializer.java:493)
     at intradoc.serialize.DataBinderSerializer.parsePost(DataBinderSerializer.java:1806)
     at intradoc.serialize.DataBinderSerializer.parseRequestBody(DataBinderSerializer.java:1065)
     at intradoc.data.DataSerializeUtils.parseRequestBody(DataSerializeUtils.java:112)
     at intradoc.server.ServiceManager.init(ServiceManager.java:128)
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:167)
Please advice.
Thanks in advance,
Nithya

The config .cfg entries are:
<?cfg jcharset="UTF8"?>
#Content Server System Properties
IDC_Name=EBIZ
IdcProductName=idccs
SystemLocale=English-US
InstanceMenuLabel=EBIZ
InstanceDescription=STAGING SERVER
SocketHostAddressSecurityFilter=*.*.*.*
#Database Variables
IsJdbc=true
JdbcDriver=oracle.jdbc.OracleDriver
JdbcConnectionString=jdbc:oracle:thin:@localhost:1521:EBIZ
JdbcUser=EBIZ_admin
JdbcPassword=ZS5CtJYdpcn2mEVqKVQAZ7LKQqacsT+XLnX3PZ/EKqo=
JdbcPasswordEncoding=Intradoc
DatabasePreserveCase=true
#Internet Variables
HttpServerAddress=punitp52975d.ad.infosys.com
MailServer=192.168.170.26
SysAdminAddress=[email protected]
HttpRelativeWebRoot=/idc/
CgiFileName=idcplg
UseSSL=
WebProxyAdminServer=true
#General Option Variables
IsOverrideFormat=false
DownloadApplet=false
MultiUpload=false
IsAutoNumber=true
EnableDocumentHighlight=false
EnterpriseSearchAsDefault=false
IsJspServerEnabled=false
JspEnabledGroups=
#Additional Variables
UseAccounts=True
IdcAdminServerPort=4440
SearchIndexerEngineName=DATABASE.FULLTEXT
IntradocServerPort=4444
DatabaseType=oracle
WebServer=apache
and httpd.conf entries are:
LoadModule IdcApacheAuth C:/Oracle/ucm/server/shared/os/win32/lib/IdcApache22Auth.dll
IdcUserDB EBIZ "C:/Oracle/ucm/server/data/users/userdb.txt"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity EBIZ
</Location>
<Location "/">
IdcSecurity EBIZ
</Location>
EBIZ is our content server instance name.
Thanks and Regards,
Nithya

Book format error

Similar Messages

Maybe you are looking for