Book inventory is zero: ISEG-BUCHM

Hi,
When i run report MI20, I am getting book inventory value as zero. I believe this is value is from ISEG table, field BUCHM. There are multiple material movements during the past two months and still this value is zero.
What is the reason?
Thanks
Ravi

Dear Ravi, please explain what you are trying to achieve ... MI20 is to print list of differences, originating from Physical Inventory. You have to book physical value so that it can show you the difference in counted/ system quantity. If you are doing physical inventory, following are the relevant t-codes
MI00      Physical Inventory
MI01      Create Physical Inventory Document
MI02      Change Physical Inventory Document
MI03      Display Physical Inventory Document
MI04      Enter Inventory Count with Document
MI05      Change Inventory Count
MI06      Display Inventory Count
MI07      Process List of Differences
MI08      Create List of Differences with Doc
MI09      Enter Inventory Count without Document
MI10      Create List of Differences without Document
MI11      Recount Physical Inventory Document
MI12      Display changes
MI20      Print List of Differences
MI21      Print physical inventory document
MI22      Display Phys Inv Docs of Material
MI23      Disp Phys Inv Data for Material
MI24      Physical Inventory List

Similar Messages

Why can not freeze book inventory Storage location and Posting block?

Hello,
I tried to freeze book inventory storage location and posting block at storage location level in SAP.
1) OMBP -> "Freeze book inventory storage' is checked at that storage location.
2) MI01 -> the 'Posting Block' and 'Freeze book inventory' in the Physical Inventory Document is checked.
3) Post the Physical Inventory Document by using MI02.
But, I am still able to post inventory movement at that storage location after executing the above.
(I run MB1C with movement type 501 at that location.
I input the material number which are in the created Physical Inventory document.
The posted manterial document is created after I run MB1C.
The document date and the posting date in MB1C are the same date of Physical Inventoery Document.
I can see this material inventory movement from MB51!! )
My question is: Why SAP is allowed to execute the inventory movement after the 'freeze book inventory storage location' and 'Posting block' are checked at OMBP and MI01 ?
Any idea?
Help me, thank you.
Regards,
Sylvia Chen

Problem solved. Thank you for all help!!

MB5B vs Book Inventory

Does anybody know what causes this?
On MB5B(for a particular date in the past) stock quantity shows 10 and the same date there was a physical inventory document created, counted but not posted-The book inventory is 15 and the stock type is the .i.e warehouse.
Regards
Nare

While Doing Physical inventory pls check wheather you have freezed your book inventory or not?? Normally this effects...if not then you first need to freeze it and then again count....
Pls check ....
Regards
Priyanka.P
AWARD IF HELPFULL

Posting Unplanned Depreciation when asset net book value is zero

We recently transferred some assets from one company code to another. However, when they transferred, the depreciation all reversed out YTD.
We are now trying to post the YTD depreciation back in under the original company code, but when we try posting unplanned depreciation, the following error message appears -
"In area 01, you can only post manual dep. up to the amount 0.00"
I believe this is because the asset does not have any net book value now.
Any suggestions on how to resolve this?
Many thanks,

Hi Susan,
do you have the option to reverse the transfer postings? If so, you could specify another period control for transfer postings (such as fiscal year start, etc.) in your depreciation key, with which you can influence how much depreciation is left back respectively transferred.
It is correct that you can´t post an unplanned depreciation on the sending asset now, because the net book value would go below zero. As unplanned depreciation does not influence the ordinary depreciation in the year of posting, this value below zero can not be adjusted with a reduction of planned ordinary depreciation.
I am wondering which effect you´d like to have on the sending asset. Did you post a complete retirement? If so, there should be no APC left which you can depreciate on the sending asset. And as the net book value is zero already, which effect do you want to get? You have to keep in mind that the non-depreciated APC will be continued to depreciate (normally) on the receiving asset. But maybe I misunderstood the problem here ...
Regards,
Markus

Update book inventory with NEW company code assignment for the same site

Hi gurus ,
Our company have this business scenario:
the site has run in Company Code A for several month with business of Material Management function, then the site have to be changed to Company Code B for financial requirement .
What we want is we change the CC assignment by OX18 for site master without changing the site number (creating a new site master ),except for the open purchasing or sales document clearance , is there any way we can update the book inventory with new profit center corresponding to the CC B ?
Thanks in advance ,
Ryan

Actually we have made some discussion with SAP consultant about this requirement ,and they suggest the same thing ,but for many reasons ,we need to make it that way ,and we also made some test for this direct changing by OX18 for new CC assignment .
All other questions are under control now , for financial reason ,we need to update the book inventory to new CC assignment (new profit center after site-specific material master changed ) in some batch session or program ,any idea for this?

Posting block Vs Freezing Book Inventory

Hi all.,
During PI count, there is an option to Block the Material. In this scenario, there can be no movement of material either GI or GR, right?
In freeze book inventory as well, "we can freeze the book inventory balance in the
physical inventory document. This is to prevent the book inventory balance, which is relevant for physical inventory, from being changed by any movements". So the terms of Movement should mean either GR or GI, right?
Now, how similar or different are these two conditions during PI?
Appreciate all the help
Thanks

Hi Mahesh,
<b>With regard to posting block</b>...you have understood correctly. The indicator is set for the affected stocks in each case (storage location stock, batch stock, or special stock) for all associated stock types and is not cancelled until the count results are posted. The indicator remains in the physical document header even if the stock is unblocked through the posting of inventory differences. It then only indicates that a posting block was set for the documents. The blocking indicator can be set in one of two ways:
(a) Directly upon entry of the physical inventory document (if the count is to take place immediately)
(b) Shortly before the count (if the count is to take place later)
<b>With regard to Freeze the book inventory</b>, at the time of PI, when you enable this indicator, system take snap shot of Quantity and Value in internal tables. That means, you can't hold or stop your business operation during this process. This indicator has the effect that the current book inventory balance is recorded in the physical inventory document. The system compares the counted stock with the frozen book inventory balance to determine any inventory differences.
Bye,
Muralidhara

Posting block & Freeze book inventory

What is the difference between the posting block and Freeze book inventory.
Both does the same thing rite? by not allowing the user to post the stock till the physical check is completed.
Note : Subject is frequently asked question,please search forum/various sap resources
before posting.
Edited by: Jeyakanthan A on Nov 29, 2011 12:27 AM

Hi,
Both are different.
Posting Block allows you to set a block indicator so that system wont allow to make any stock postings during the Physical inventory period.
Where as Freeze inventory will Freeze the book inventory i.e. it makes a note of the total inventory of a material and freezes it. so that you can still make stock postings even after creating physical inventory documents.
For ex:
Suppose you have set Freeze book inventory for a SL and you are creating a physical inventory document today and currently your total stock in un-res use for a material is 100 in that particular SL.
After sometime you are entering a GR of say 100 qtys.
Now as per the physical count - total stock available physically was 90 only then in this case when you do a physical inventory posting - system will do a adjustment of 10 Quantities only and not 110 Quantities.
i,e. it will consider the freeze stock qty 100 rather than the total stock 200 Qty after the latest GRN.
Hope its clear.
Thanks & Regards,

PI - Posting Block or Freeze Book Inventory

While generating the PI document, there are check boxes for 1)posting block & 2)freeze book inventory. I would like to know under what circumstances would we have both check boxes checked. Some business example will help my understanding of usage. Thanks in advance.

Hi ,
1)This freezing indicator basicaly functions like this manner, If the count results are not entered immediately after the stock has been counted, it is useful to set this indicator so that any goods movements which may take place in the meantime will not change the book inventory balance relevant to the physical inventory.
2) blocking indicator , it will not allow any postings for this material during physical inventory count.
regards,
sudhakar

Subtotal and grand total for two fields(iseg-buchm and iseg-erfmg)

hi experts,
    how to do subtotal and grand total for two fields (iseg-buchm and iseg-erfmg).please help me on solving the problem.

subtotal & grand total can be done in folowing way in ALV.
1.Pass it_sort parametere to REUSE_ALV_GRID_DISPLAY
2.Give the field name for sorting in it_sort-fieldname. it can be any field name u want to sort ur data with.
3.For iseg-buchm & iseg-erfmg mark do_sum = 'X'. in fieldcat
gs_sort-spos = 1.
gs_sort-fieldname = 'ANY FIELD NAME'.
gs_sort-up = 'X'.
gs_sort-subtot = 'X'.
APPEND gs_sort TO et_sort.
IF iv_fieldname = 'BUCHM'
OR iv_fieldname = 'ERFMG'.
    gs_fieldcat-do_sum = 'X'.
ENDIF.
APPEND gs_fieldcat TO gt_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
       is_variant              = ev_variant
      it_fieldcat             = gt_fieldcat[]

Legacy Asset Net Book Value is Zero-Want to post Sale of Asset for the same

I have Scenario
We have upload the legacy Assets in Year 2005. One of the Asset Net Book Value is Zero. When we are trying to post Asset Retirement, the for that Asset following is error message received:
"Retirement of Old Assets data not possible (No Existing old Asset Data).
Though in the books the Net book value is Zero, we have received profit on sale of Asset.
How post the profit on Asset & also how to take it from the gross block.
Thanks
Rags

Hi,
the e-message stated, that you must use another transaction type:
so not a transaction type with old asset data like 210.
try / test transaction types : 250-275
pls reward useful answers
thx.
Andreas

Freeze book inventory

Hi All,
During the cycle count, physical inventory document is generated with indicator Freeze book inventory balance is set.
That means the inventory will be freeze in the background. That has no impact to production or some other departments. They could work normally during the inventory freeze. Please confirm.
When will be the system freeze inventory? is it after generating the document?
Is it applied to every cycle count?
Thanks

When will be the system freeze inventory
- If you check freeze inventory in MICN, system freezes the book inventory for the physical inventory process. i.e system considers the book stock before the creation of physical inventory document. for ex. you are creating the physical inventory doc. for a material and the stock at that time is 100 EA. Now system freezed the book for physical inventory process. you can still receive the stock but it will not be considered as part of the physical inventory process. issue comes here.. you freeze the book and recevieved another 50 qty before counting. As per physical inventory, book quantity is 100 and when person counts real book quantity is 150 EA.. so will you post this 50 as difference? so its not advisable to freeze if your physical inventory process takes long time. But if you block indicatory you can do transaction with that material..
is it after generating the document?
- Freeze starts from the moment physical inventory document created and it's unfreezed after the posting.
Is it applied to every cycle count?
- it depends how you check freeze icon in MICN.. you can uncheck it if you dont want but understand the implications.

Booking Inventory Loss_Item lost in Transit

Dear All,
We have a scenario where we dispatch Items through courier service (DTDC or First Flight), during transit some item lost due to poor management by courier service.
Now we want to track all those lost items and book a transaction against courier service , how to do that ,
Are the following steps correct
****1) First Option :-
Lost item should be taken in stock through GRN and should out stock through Delivery note making DTDC as customer.
****2) Second Option :-
Lost item should be taken in stock through Goods Receipt ( in Inventory Transaction tab) and should out through Goods Issue (in Inventory Transaction tab)****
Please suggest correct option from above or apart from this.

If you are billing the courier for the lost option 1 would be the best way as you can then create an invoice from the delivery.
Option 2 wouldn't allow you to track collecting from the courier.
If you have inventory on for the items lost, when you create the credit memo to the original receiver of the item the credit memo would put the units back in stock so the Goods Receipt note is not neccessary.

Booking & Inventory Control

Hello. Is there a way to tie inventory into bookings, either with the catalog or web apps? Or is there a way to create a couple of bookings into one form?

jessicapugliese wrote:Is there a way to integrate a web form into one product?
Not if wanting to link to inventory control.
Couldn't you make the item a product and update your purchase forum with a few custom fields to collect the data required?
-Sidney

InCase Convertible Book Jacket - Issue - Zero InCase customer support

Fellow iPad lovers,
Wondering if any of you have run into this issue. The little strip on the top near the headphone jack completely covers the jack? Every time I want to listen to music I have to push the iPad in tighter and it's forced. The odd part is the bottom is lined up perfectly for the power adapter port.
What it seems like is the leather or material on the top of the iPad is all shifted over and interferes with the headphone jack, and on/off switch.
I have been emailing InCase support for over 2 weeks now with no reply (included close up pics).
At this point support is rating lack lustre.
I may be in luck because I would classify this as a defect. I will place a phone call tomorrow.
I tried taking the case back to the Apple store, but it was past the 30 days, and they no longer carry this case.
Just curious if any of you found this similar issue?
Best,
Adam
Message was edited by: chinjazz

I would choose "None of the above" and go with the Apple case. The case works well with the Blue tooth wireless keyboard and is a perfect fit for the ipad.
I think the case is a must have.

Inventory difference.. upload with with zero value

Hi
Material : Label . Sticker
UOM     : KG
Additional UOM : EA ( 1 KG = 100 EA approx. ) normally it varies + -10%. means some times there are 90 EA in 1 KG, sometimes 110 in 1 KG.
We purchase Stickers in KGs. and Issue in EA in System . for example when user request issue 500 Ea labels. we issue 500 EA label in system, but physically we give 5 KG.
when user consumed 500 EA and , then he found 45 EA left out of those 5 KG. ( means actually there were 545 Ea in 5 KG Lables).
how we can take these 45 EA. into Inventory. ( upload quantity only ) ( with out any accounting entry \ with zero value ).
or is there any other best way to deal this. keeping in view it is impossible to count these lables while purchasing or issue.
thanks \ thomas

thanks Guru for giving time.
with this 2nd option
Option2
post a 202 movement, use external value field(may need to be customized) and give zero value there.
This has the benefit that you would not give a credit to the cost center,
and as you post the inventory for zero amount,
a new moving average price is automatically calculated and updated in material master.   "
when i tried with MB1A and 202. one thing. Cost center is compulsory second there is no filed "External Value Field" ( plz guid some steps how to customize it . ,
thanks \ thomas

Book inventory is zero: ISEG-BUCHM

Similar Messages

Maybe you are looking for