BooK Mark Question how do i alphebize my book marks or favorites?

book marks

See:
*https://support.mozilla.org/kb/Sorting+bookmarks
You can look at this extension:
*https://addons.mozilla.org/firefox/addon/auto-sort-bookmarks/

Similar Messages

UDF question - how detect a non existing sender element

Hi all,
i have a question according UDF. I have a sender message that contains a field, that sometimes has a content ans some time not. If no content then als the element doesn't exists (occurrence 0...1). The target element of this one has the occurrence status 1.
So i have to create a function, that writes an empty string in case of no sender element. I know that i can configure this function with the MM Blocks (if exists ...). But for re-using reasons i'd like to create a UDF for this function.
Now my question, how can i detect if no data in the sender (src) file?
Here my try, which doesn't works:
AbstractTrace trace = container.getTrace();
trace.addInfo("container: "container);+
trace.addInfo("iData: "iData);+
if(iData == null){
+ trace.addInfo("NO ELEMENT found!");+
if(container == null){
+ trace.addInfo("NO container found!");+
if(iData.length() < 1){
+ trace.addInfo("Empty or No element found - insert empty entry (space)");+
+ return " ";+
return iData;
Thanks in advance
Michael

Hi Michael,
Create a UDF of type value,
Suppose in is the input and out is output of UDF..
Then Code as follows:
if(in==null)
 out = " Empty String Found ";
else
 out = in ;
return out;
Use this code...and get ur problem solved!!!
Regards,
AshwinM
[Dont forget to mark the answer]

HT1420 i forgot my answers to my security questions, how do i setup new questions and answers?

I have forgotten my answers to my security questions, how do i setup new security questions and answers?

Welcome to the Apple Community.
Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

HT5787 If i know email ( but i dont have acces to it ) and i dont have secret questions how can i recover my icloud account ?

If i know email ( but i dont have acces to it ) and i dont have secret questions how can i recover my icloud account ?
I'n my company ( pawn shop ) i hope i transleted fine , i bought an iphone wich it seems to be ok at the first time.
That was on 26.11.2013 ( as can be seen in my pawn contract and billing ) . after 2 weeks i found a client to buy my second hand iphone and the i saw my mistake it is icloud blocked i need that password so i can reset the iphone to sell it. how can i manage this problem ? i can provide all my billings, contracts, society data everything.

If you know the primary email linked to the account but do not have access to it or the answers to the security questions, then the next best thing to do is call Apple at 800-275-2273 and ask for Account Security. They will ask you for two pieces of information from the account in order to unlock it. The options are usually the security questions (each question counts as one piece), the credit card linked to the account, and either a device serial number or device verification code that they will send you.
After this verification is complete they can send the reset link for your password to any email you choose. Please be aware that if they verify you with something other than two security questions, there is a 24 hour wait before the email arrives.
Good luck!

Very simple question-how to fill a shape I draw with color

hi. I am new to photoshop and having a lot of trouble selecting any shape that I draw. I am trying to do a tutorial that involves filling a canvas with gray, then drawing a smaller white rectangle inside of the larger gray canvas/rectangle. (I did not forget to unlock the background).
My question: how do i select and fill (with white) the second rectangle I draw on top of the larger gray rectangle???
In general, I cannot figure out how to select and/or fill any shape I draw using the rectangle tool. Likewise, the marque shape tools are no help as I cannot seem to draw a marque on my gray rectangle in order to select it and fill it with a white fill. I have also tried to use a "fill layer."
I am almost certain that something is wrong with my computer(I reset the settings), but then again I have not used photoshop in over a year. Any help will be greatly appreciated.

The Rectangle Tool sgould create a Work Path, Shape Layer or Fill Pixels according to the Settings in the Options Bar.
The Rectangular Marquee Tool should create a Selection, which you could Edit > Fill or use as a Layer Mask for a Solid Color Layer.
Could you please post a screenshot with the pertinent Panels visible?

Topic area: Apple Mail. Question: How do I get the message preview window to display to the right of my list of email messages?

Topic area: Apple Mail. Question: How do I get the message preview window to display to the right of my list of email messages? i.e. to preview whatever message is currently highlighted in the center window list of messages?

At present there is no preference option available to move the preview
pane to right side of the mail window.
Best.

Question: How do I get music files off a thumb drive into iTunes so I can put the music on my iPad and iphone

Question: How do I get music files off a thumb drive into iTunes so I can put the music on my iPad and iphone

Welcome to the Apple Community.
Just drag them to your open iTunes window.

HT201363 Good evening ... I have an account in appel and I have purchased a card But I can not buy applications because the applications you want to push it under the answers to security questions and I forgot the answers to these questions How can I c

Good evening ...
I have an account in appel and I have purchased a card
But I can not buy applications because the applications you want to push it under the answers to security questions and I forgot the answers to these questions
How can I change my answers to security questions??

Hello, yazanalmasri0.
If you need to reset your security questions and have a rescue email attached to your Apple ID, this article will help you with this issue.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
If you are still unable to reset your security questions or do not have a rescue email associated with your account, you will need to reach out to our account security team.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Just a suggestion..........
Download Thunderbird. Easier to use when it comes to what you want to do w/your emails.

Designer beginner's question: How to populate form with XML web service output?

sorry, here is yet another Adobe Designer beginners question: My form uses a webservice data connection which returns an xml-string like this: <?xml version="1.0" encoding="utf-16"?> <CurrentWeather> <Location>Sion, Switzerland (LSGS) 46-13N 007-20E 481M</Location> <Time>Apr 26, 2007 - 09:50 AM EDT / 2007.04.26 1350 UTC</Time> <Wind> from the WSW (240 degrees) at 15 MPH (13 KT):0</Wind> <Visibility> greater than 7 mile(s):0</Visibility> <SkyConditions> partly cloudy</SkyConditions> <Temperature> 80 F (27 C)</Temperature> <DewPoint> 46 F (8 C) </DewPoint> <RelativeHumidity> 30%</RelativeHumidity> <Pressure> 29.88 in. Hg (1012 hPa)</Pressure> <Status>Success</Status> </CurrentWeather> What is the simplest and recommended way to extract the element fields to my form? Thank you very much an kind regards, Hans Grund

The question is still unanswered!
Let me give some details and break up the problem
in more specific questions:
- In Designer 8.1 I click new data binding --> wsdl -->
http://www.webservicex.net/globalweather.asmx?wsdl
A message box comes up and says "cannot load wsdl file"
==> 1. Question:
Why maybe refuses Designer to load the http-wsdl,
although this option is explicitly allowed?
- When I save the wsdl to a file, Designer loads it
without any problems. The web service uses two input parameters
(CountryName and CityName) and returns an xml-string GetWeatherResult)
like the one in my first posting. I drag these fields from the binding view to my form, and it runs ok!
- THE PROBLEM IS, THAT I NEET TO EXTRACT THE ELEMENT FIELDS
FROM THE RESULT XML-STRING!
==> 2. Question:
How to extract xml element fields from wsdl output into a form?
- I tried with eclipse and XmlSpy to build a modified wsdl file
with structured output definition, so that the specific element fields
show up in the data binding view and are usable to my form,
and the modified wsdl maps consistently to the web service result string.
So far without success: In the PDF -preview or Reader-
when the wsdl-binding is executed and the web service output
should show up in the result fields, just nothing happens.
==> 3. Question:
Can this strategy to provide a "modified wsdl" possibly succeed,
and how?
==> 4. Question:
Is is possible -and how?- to check whether an xml string
is valid as web service output against the wsdl-definition?
==> 5. Question:
How to debug a web service connection with Designer?
- Finally I tried to find a way to load the result xml-string
into a local var in the script editor and parse it, much like:
var xmlDoc = new ActiveXObject("Microsoft.XMLDOM");
xmlDoc.load(DataSet.MyForm.GetWeatherResult.rawValue);
==> 6. Question:
Is it possible -and how?- to use a framework like dotnet?
How to utilize SAX or DOM in Designer?
Many thanks and appreciations for your help!!

Best Practices Question: How to send error message to SSHR web page.

Best Practices Question: How to send error message to SSHR web page from custom PL\SQL procedure called by SSHR workflow.
For the Manager Self-Service application we’ve copied various workflows which were modified to meet business needs. Part of this exercise was creating custom PL\SQL Package Procedures that would gather details on the WF using them on custom notification sent by the WF.
What I’m looking for is if/when the PL\SQL procedure errors, how does one send an failure message back and display it on the SS Page?
Writing information into a log or table at the database level works for trouble-shooting, but we’re looking for something that will provide the end-user with an intelligent message that the workflow has failed.
Thanks ahead of time for your responses.
Rich

We have implemented the same kind of requirement long back.
We have defined our PL/SQL procedures with two OUT parameters
1) Result Type (S:Success, E:Error)
2) Result Message
In the PL/SQL procedure we always use below construct when we want to raise any message
hr_utility.set_message(APPL_NO, 'FND_MESSAGE_NAME');
hr_utility.raise_error;
In Exception block we write below( in successful case we just set the p_result_flag := 'S';)
EXCEPTION
WHEN APP_EXCEPTION.APPLICATION_EXCEPTION THEN
p_result_flag := 'E';
p_result_message := hr_utility.get_message;
WHEN OTHERS THEN
p_result_flag := 'E';
p_result_message := hr_utility.get_message;
fnd_message.set_name('PER','FFU10_GENERAL_ORACLE_ERROR');
fnd_message.set_token('2',substr(sqlerrm,1,200));
fnd_msg_pub.add;
p_result_message := fnd_msg_pub.get_detail;
After executing the PL/SQL in java
We have written some thing similar to
orclStmt.execute();
OAExceptionUtils.checkErrors (txn);
String resultFlag = orclStmt.getString(provide the resultflag bind no);
if ("E".equalsIgnoreCase(resultFlag)){
String resultMessage = orclStmt.getString(provide the resultMessage bind no);
orclStmt.close();
throw new OAException(resultMessage, OAException.ERROR);
It safely shows the message to the user with all the data in the page.
We have been using this construct for a long time for all our projects. They are all working as expected.
Regards,
Peddi.

I forget my security question,how to get it back?

i forget my security question,how to get it back?

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(108190)

How I know my answer to the security question, How I know my answer to the security question

How I know my answer to the security question, How I know my answer to the security question

Click here for information. If you can't reset them through the method described in that article or by sending yourself a rescue email(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to create a rescue email address without correctly answering two of the questions. Nobody on these boards can reset them for you.
(94895)

Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
Regards, Bill
* update
I've tried modifying this key and the path:
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
Also tried using symlinks as detailed here:
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral

Here's some links I've used to try to figure this out:
http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
Regards, Bill
The registry method does not work with 8.1. I found this out the hard way. Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

HT4753 I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.

BooK Mark Question how do i alphebize my book marks or favorites?

Similar Messages

Maybe you are looking for