Book Module Auto Text not working

AutoText in Page Text does not seem to be working for me. You can see that the caption as Photo Text does appear (towards the top of the image area). The color of the text is black, so it shouldn't be invisible. I'm at a loss.

The second para is simply to add extra pages manually assuming you got the first page looking how you want. The select all text cells usually works with the buttons for above , below justify left, center etc when the cells are highlighted in yellow.
I would suggest experimenting by starting a new collection with say two photos which each contain a caption. If you can get the layout right it’s possible to save it as a preset under the Auto Layout Tab. You click the dropdown menu to the right of the preset name and choose Edit Auto Layout Preset. Then choose your own preset name and save.
You can then drag as many additional images as you wish into the collection and use the auto layout button to fill the book.
On your example highlight the page in yellow. Click the triangle bottom right and change the template from the one photo list i.e. to one with photo above and text below. Use auto text to fill with the caption. To get rid of the caption on top of the photo, if that is what you want, highlight the text cell and press the delete key.
I forgot to mention. If you are looking to place the text which appears on top of the photo below the photo you can copy and paste. Highlight the top text cell and press Ctrl+A followed by Ctrl+C.
Then select page text in the right hand panel and use Ctrl+V in the page text holder. You can then delete the top cell contents and use the offset slider to position the bottom cell.

Similar Messages

  • Auto text not working on Q10

    My word substitutions are not showing up in the suggestions list. Every predictor is turned on and the word substitution list exists, but still no green substitutions appear as I text or email or bbm. It was working perfectly until today when I added a new phrase. At first the new phrase only, did not appear, so I turned my phone off and back on again, and now no word substitutions whatsoever appear.

    Check your Settings... are the Word Sub entries there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Variable Text not working as dynamic header in Crystal report

    Dear Experts,
    I'm working Crystal report that connected to Query BEX SAP BW trough SAP integration kit,
    currently i have case that need report dynamic header using variable text from BEX query, but seem the variable text not working in Crystal reports. the header in Crystal report shown as Desription\technical name, not result from the variable text in Query BEX in SAP.
    In https://wiki.sdn.sap.com/wiki/display/BOBJ/Crystal%20Reports%20and%20BW%20query%20elements stated that the "Text variable" with "replacement path" is supported, but i don't know in my query is not working.
    i already set in Database -> options->  table and fields -> Show Both, but the text variable still not working.
    can you help me
    Crystal Reports 2008 12.2.0.290
    SAP Integration KIT 12.1.0.890
    Thanks
    Luqman

    Post your question BEX and B1 and classic SAP data source issues to the Integration Kit forum

  • Book Mark Icon is not working?

    Hi,
    There is an Adhoc query created by the end user.The book mark icon available is not working but the CONTEXT MENU on any of the values is producing the book mark properly.Can just any one help me to find the solution of this?
    Why BOOK MARK ICON is not working?
    Please correct me if I am wrong.
    Book mark is URL we are getting after the clcking on the EIther on the ICON or context menu option.This URL can be used any where where ever is required.Right?
    But In my case the URL Content is chainging based on the Adhoc query designer.Only characterstics are again and again changing but key figures are original only.
    please help me?

    U mean to say the Book Mark URL created on one system will not work on another system right?
    =>the Book Mark URL created on one system may not work on another system right? in fact in 80% cases it works...
    But what once I execute the query in portal I will be getting an URL.This also can be used as Book mark right?
    =>yes, it can be used,,,
    but the URL generated with the function of the BOOK MARK is only called as Book mark why is it?
    => let me explain this with an example ... there is a BW server physically located in France and can be accessible across all the location wherever project is running. Somebody try to access the Query URL from Gurgaon (one of the project location)which was executed in France may not be run in Gurgaon (Page cant be displayed) because port # in the URL may be blocked in Gurgaon due to security reason,,, this case we have to contact the admin ,they will enable the port..same case i have faced

  • Book mark Icon is not working in Adhco queries?

    Hi,
    There is an Adhoc query created by the end user.The book mark icon available is not working but the CONTEXT MENU on any of the values is producing the book mark properly.Can just any one help me to find the solution of this?
    Why BOOK MARK ICON is not working?

    Hi,
    I observed the same, Book Mark Button availabe on web report is not working but Book mark URL can be saved with the context menu -> bookmark.
    need to check the Web template for  Book Mark.
    Bookmark URL can be saved and that URL is used to go fastly to the requied navigation fastly, that is the use of Bookmark
    hope this helps
    Regards
    Daya Sagar

  • Why is predictive text not working on my iPhone 5s anymore

    Why is predictive text not working on my iphone anymore

    Actually, I just found the answer to my issue in this thread: The type correct/predict function for mail and text in iOS 8.0.2 was working fine then suddenly disappeared and reverted to the old style. I've checked all settings that seemed appropriate. How do I restore? I actually liked the new version. 
    Which says "a thin gray bar with a white dash in the middle of it immediately above the keyboard, you can reopen the suggestions by sliding up with one finger on the white dash." 
    That did it.
    I too have noticed a change, it seems with the new IOS update. My Predictive setting is on, but it seems before it would come up more often in predicting words and also give me a few choices. Now, it's not coming up as much and only providing one 'predictive' word which is not always right. This change is not very useful.

  • Auto brightness not working in ios6

    I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

    Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
    I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
    I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
    Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

  • AUto attendant not working

    Auto attendant not working .....
    If i assign AA script Transfer_v02.aef then i hear an just 1-2 seconds the script after that again it is just ringing ...
    Is there Option to set
    Please press the extension which you want to Call ...
    Eg: if i press 222 that time it should ring the 222 extension
    Please help this is the first time i am working on this stuff
    If i chnage the scrpt file then i can hear auto attendant not initiazlised..  please find the attched screen shot and back file for more details.
    Best Regards
    Shabeel

    Hi KMS, check the codec used between that GW using the FXO and the CTI RP.
    Check also the Calling Seach Space
    GW should be able to reach CTI Route Point and CTI ports partition.
    If you try other extension it works fine?

  • Auto keyframe and auto transition not working

    auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

    In order to use these you need to have the autokey frame and transition selected
    OFF   ON
    and have the first key checked then move the playhead to the new position and it should add the transition.
    Did you try this and it is not working?.

  • Auto dial not working

    Auto dial not working
    I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
    In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
    Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
    I must have inadvertently changed some setting.
    Skype works, MagicJack works, but I must dial the number manually.
    I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
    To say the least, I am frustrated because it must be something obvious. (to everyone else!)
    Any ideas as to how to how I can get it to dial automatically again?
    Thanks for any assistance.

    IPAD user guide for IOS 8 is available on line at apple -
    you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
    http://support.apple.com/manuals
    Handoff is only for using with multiple devices - Iphone/Ipad/ipod
    This is the bit in Handoff on Phone calls
    Phone calls
    If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
    Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
    Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
    You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

  • Auto brightness not working on iPhone 5?

    On the iPhone 5 - In the settings, when flicking the auto brightness on/off the screen shows no change in brightness - whether in a completely dark room or with the lights on etc. My iPhone 4 has been updated to IOS6 and seems to be working normally (brightness auto adjusts in all situations).
    Anyone else have this problem of the auto brightness not working?

    There is nothing wrong with the auto brightness.
    When you have auto brightness enabled the slider works as the minimum brightness setting with auto brightness.
    If you have the slider too high the brightness cant reduce because youre not letting it.
    Set your brightness at about 25% and you'll see what I mean.

  • I created a book using iPhoto, but the "Buy Book" tab seems to not work. Any suggestions?

    I created a book using iPhoto, but the "Buy Book" tab seems to not work. Any suggestions?

    First confirm that you can create a PDF file of your book as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it. Post back with the results.
    OT

  • HT204150 Following problem: I have around 600 contacts on my iphone and Ipad and would like to sync with contact list on my mac book air but its not working and whatever I do I get stuck on the 44 contacts I have on my mac  contact-list. Please Help!!!! 

    ollowing problem: I have around 600 contacts on my iphone and Ipad and would like to sync with contact list on my mac book air but its not working and whatever I do I get stuck on the 44 contacts I have on my mac  contact-list. Please Help!!!!  thanks

    First, be sure that the contacts on the devices are in the "icloud" section and not the "On my iPhone" (or iPad) section of the contact listings/groups.
    Missing contacts:
    Here's a test to perform - using a computer's browser, log into icloud.com and go to the Contacts page.  If most of them are gone, then they are gone. 
    If they show up, then the problem is that your device is not connecting to the Contacts database on icloud. 
    On the device, go to Settings>icloud.  Be sure icloud is on and using the right ID.  If not, scroll to the bottom of the page and tap Delete Account - this just disconnects the device from that account, no data is lost.  Then log back in using the correct ID.  ALSO - be sure the Contacts are turned on (on the same screen).
    Note:  Contacts are not part of an iCloud backup, since they are part of contacts database on iCloud's servers.   So performing a restore will not help.
    Contacts are gone from icloud.com.
    Then they have been deleted.  There are many reasons for this.  One possibility is that someone else is using the same iCloud account (family member, etc.) and they deleted contacts, thinking they did want them on THEIR device.  How to get them back?  Unfortunately, an iCloud backup does not include any of the sync databases, like contacts, notes, calendars, reminders, etc. because the data is already stored in these databases.  Your only hope for restoring the data is if you had that data on a computer (like a mac's Contacts, Calendars, etc.) and that data was backed up using whatever backup software you typically use (e.g. Time Machine on a mac).  Just restore the data files back to the computer.  Other than that, I'm afraid the data is gone.

  • Office 2013 Auto Archiving not working

    Dear Sir / Madam,
    We are using MS OFFICE 2013 with Windows 8.
    Problem we face is Auto Archiving not working at all. We have defined all the parameters, still it is not working. We are using Exchange Server and all the emails are Archived to local PST files after a defined time period.
    We have defined all the steps required to do Auto Archiving.
    Your help is required in this since we have tried all the options.
    Paloli Manoj

    Hi,
    What's the size or your archive.pst file? Please first make sure it's not getting close to 50 GB limit.
    If the size far below 50 GB, please try to use the Inbox Repair tool to scan and repair the archive.pst file. If the file is corrupt, the autoarchive will not happen.
    http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
    For more troubleshooting steps, please refer to this:
    http://www.howto-outlook.com/faq/archivenotworking.htm
    Regards,
    Steve Fan
    TechNet Community Support

  • The keys on my mac book pro (2009) are not working properly, both letters and numbers.  I think I pressed something,but I cannot find a numlock key or other to undo this problem

    Both the letters and numbers on my mac book pro (2009) are not working correctly, but the caplocks key still lights up,the delete key is like a back key,the o key is enter,etc. I think I must of pressed a button but I cannot find numlock or the action to fix it back to normal.
    Need Help Please

    Try this. Open one of your files. The window that contains your picture is named at the top. Command click on the name and you'll see the entire path starting with its name and then moving to the folder, the folder it is contained in, etc all the way to down to the hard drive volume name. This should tell you where to find the folder.

Maybe you are looking for

  • Issue with ALV grid print preview/spool

    Hello everyone, I am working on a report and I am having some issues with ALV grid. Currently in our DEV and QA environments the user can run the report, view the ALV grid, and print the grid without any issues. However this isn't the case in the Pro

  • Mouse not working in areas of the finder

    My mouse is only allowing me to click on items along the outskirts of the monitor.  When the mouse is in the middle of the screen it won't allow me to select anything.  I've tried my trackpad as well as a corded mouse--same effect.  Restarted several

  • Setting "Filling of Form Fields" document property to "Not allowed"

    I am using Adobe LiveCycle Forms, and I want to set the property "Filling of Form Fields" as "not allowed" in the pdf documents it renders (that property can be found in the "Document Properties" window of Adobe Reader, under the Security Tab). Is th

  • How to provide f4 help

    Hi guys,   here i amproviding some sample code. requirement is uploading data from xl to internal table. problem is how to provide f4 help for file name. using cl_gui_frontend_services. type mismatching is occuring. DATA:  wa_filename1 TYPE file_tabl

  • ROIDOCPRMS table on R/3 source system: Src. System and Tgt System fields

    Hi experts There is a lot information about ROIDOCPRMS on SDN, but I cannot find anything which describes if the name of the BI system should be in a records in the ROIDOCPRMS table on the R/3 system. The documentation (F1) for the source system fiel