Book or article on FCE working with only photos

Can someone recommend a good book OR article about working with photos and FCE? I mainly make historical DVDs and use photos, not film.

I can't recommend any articles as I have not read any but take a look at these 3 links.
The first 2 are specifically for photos, the other 2 are sites with vast numbers of tutorials which you will have to check out yourself.
Remember that what works for Final Cut Pro will usually work for Final Cut Express.
http://www.geniusdv.com/newsand_tutorials/2010/08/ken_burns_effect_in_final_cutpro.php#more
http://www.larryjordan.biz/articles/ljprepping_still_imagesFCP.html
http://lafcpug.org/tutorials.html
http://www.kenstone.net/fcphomepage/fcp_homepageindex.html

Similar Messages

Why does my imessage not work with only 1 phone number

Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

How can I get address book 4.1.2 to work with osx 10.6.7

How do I get address book 4.1.2 to work with osx 10.6.7

You probably can't, but you can start by posting your queston in the correct forums...the OS X Mail and Address Book forums, as this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to your question in any way.

Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

Hello Jesslb23,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Best of luck,
Mario

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm.

My imsg is not working with only one person and her imsg is working perfectly fine with her friends

My imsg is not working with only one person and her imsg is working perfectly fine with her friends

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
From Apple:
MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update
Yes, a fix is coming soon.

When I try to work with some photos Imovie gets stuck and then it stops to work at all. It happens only with some specific photos,is there a way to repair them?I can't go on this way,help me please

When I try to work with some photos Imovie gets stuck and then it stops to work at all. It happens only with some specific photos,is there a way to repair them?I can't go on this way,help me please

Hi,
The movie is probably MPEG format.
QuickTime Pro and iMovie cannot transcode audio contained in MPEG movies.
Try to convert with SimpleMovieX or MPEG Streamclip instead.
http://www.aeroquartet.com/SimpleMovieX/
http://www.squared5.com
Regards, BJ

Can Siri work with only wifi without installing SIM card in it?

Can Siri work with only WiFi without installing SIM card in the iPhone 4S?

I am seeking to use the siri from my newly bought iPhone from USA where i am staying here for vacation around 2 months . I will be installing the SIM card not in USA , where iwill be back home 2 months from now. Can it work with only wifi on it

"there was an error working with this photo"

I am new to the forums.
I have been using a Windows Vista computer with I believe an older version of LR. I thinkg it is 4.??
When i would plug in my memory i would use LR to import my pictures and import them to an external hard drive connected to my WiFi router.
I never had a problem with it.
I recently made the move to Apple and got an iMac. I downloaded and installed LR on my iMac and then imported the photos with no problem.
Now when i try and view the phots they are coming up grainy and getting an error:
" there was an error working with this photo"
I then look down at the thumbnails view and all of them are showing ! in the upper right corner. So i click on it and get another error:
"Lightroom has encountered problems reading this photo. You will not be able to make adjustments to this photo"
When I look at the import section i get "preview unavaible for this file"
I would say i am a newbie to LR and i really only used it to import and manage my photos. I have no idea where to begin troubleshooting.
Any and all help would be greatly apprecaited.
Thanks

Yes. When I am watching, it seems to complete the autowrite in a few seconds after making a change.

Lightroom 5: All photos now "Error working with this photo"

I went back to my lightroom catelog, where a lot of my photos are all on my NAS, and now all the photos are unable to be edited. "There was an error working with this photo."
Everything was working for awhile, but now every single photo is erroring out.
In the finder, i still see the photos perfectly fine. I even opened up the good 'ol Photo Mechanic 5 and opened a contact sheet, and these photos still worked. So it's not like they're corrupted or completely gone.
I created another new lightroom catelog, and tried to import the photos again. But when I select the directory the photos are in, it's empty for about 10 minutes, then shows all the photos but with "Preview unavailable for this file."
The big caveat are all these photos are on a networked NAS (Synology). I'm accessing it over WiFi which is probably the biggest problem.
The folder was mounted as a NFS folder. It was disconnected once when I had a power outage (damn wind). I since re-mounted the folder and all that. I'm not entirely sure if that's what did it or if these errors started happening after that or not. But I've moved photos to my NAS folder in my catalog just today, and they are now erroring as well. So it's not like the older ones are erroring. Just all of them are.
Mac OSX - Mavericks 10.9
32GB Ram / 3.4GHz Intel Core i7
Lightroom 5
Files are all: DNG/ARW/NEF

I'm sorry I can't be more helpful, but there are lots of messages in the forums about Lightroom problems specifically related to Synology NAS.
Have you spoken to Synology about this?

I have a Nikon 300S. It is set to NEF(RAW) + JPEG fine. When I import to Lightroom I get message "There was an error working with the photo? Does anyone know why or how to correct?

Nikon 300S. It is set to NEF(RAW) + JPEG fine. When I import to Lightroom I get message "There was an error working with the photo? Does anyone know why or how to correct?

I don't know the answer, personally, because I don't use Lightroom. This is the Camera Raw forum.
Someone here might answer your question, as there are a lot of clever people here, but, if not, you might try here:
Photoshop Lightroom

All of my photos now have the same photo when I look at them in the viewing area. I have to actually open the photo itself to see the actual photo. this makes it impossible to work with the photos in iphoto. Help!

All of my photos now have the same photo when I look at them in the viewing area. It makes it look as though all of my photos are the exact same! I have to actually open the photo itself to see the actual photo. this makes it impossible to work with the photos in iphoto. How can I return it so that I see the photo itself in the preview area? Thank you!

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take three or four goes.
Regards
TD

JMS Queue working with only one AIA instance.

Hi,
We are having a Web-Logic JMS Queue configured for an instance. I have developed a consumer in AIA instance to pull the messages from the Queue.
And this works fine.
Now I have an another instance consumer which is pointing to the same Queue, but it fails to get the messages from it.
I have switched off the consumer in the FIRST instance, but even then consumer from the SECOND instance was not able to pull the messages.
Later, I tried switching on the consumer of the FIRST instance, and all the messages were pulled in this instance.
So how can I make it work with two AIA instances and one JMS Queue, provided only one AIA instance consumer is active at a time.
Thanks in Advance.
Regards!

* Likely your best bet is to check your server logs for "Error" and "Warning" messages, and/or, since these questions are specific to AIA's usage of JMS, post your questions to the AIA newsgroup.
* WL JMS does not impose a limit on the number of consumers on a queue, but it does only allow one named connection with the same "client id" to connect at a time. Its unusual to name connections in queueing applications, but possible - and AIA may be doing this. (If this is the problem there should be "client id in use" style log messages or exceptions.)
* Another possibility is a misconfiguration of your remote consumer. Make sure the URL is correct, and remember, if an application is running in the same cluster as the remote destination, don't specify a URL.
* Also, if the remote consumer is running in a different domain, make sure the domains are named differently, and that no two JMS servers in the two domains have the same name (as per the unique naming restrictions documented in the Best Practices section of the JMS configuration guide -- http://download.oracle.com/docs/cd/E14571_01/web.1111/e13738/best_practice.htm#CACJCGHG ).
Regards,
Tom

ISight working with only Safari, nothing else

My built-in MacBook iSight is only working with Safari (at like video sites), but it won't work with iChat or Photo Booth. I have no idea how to try to fix this.

You have to quit Safari before it will work in another application.

Will PCI-CAN card work with only 2 wires?

If I'm using my PCI-CAN card configured for internal power, do I need to connect anything other than CAN-L & CAN-H to my CAN network? I'm doing this right now and am able to correctly receive packets thru the card. However, it appears that my transmitted packets are not being seen by the other nodes. I'll know more when my CANalyzer arrives, but I was wondering if my cabling is OK as-is.

I currently have a connection set up with only CAN-L and CAN-H wires connected. I am able to transmit and receive with no problems at 500kbs, so it should work as long as the lines are properly terminated. (120ohm resistor bridging the wires at both ends)

Book or article on FCE working with only photos

Similar Messages

Maybe you are looking for