Book order will not process
I am using version 6.0.6 of iphoto. I am trying to submit a book, but I keep getting an error message that an error occurred while uploading one of my files. I did successfully submit another book. Does anyone know of a tool to verify images so I can target the problem foto
Welcome to the Apple Discussions. If you have any text boxes in the book which you haven't used put just a space in them and try ordering again. That is a know issue with the newer iPhoto 08 version but might be affecting your ordering process as well.
You might want to check the iPhoto 6 forum as there may be a specific fix for that issue and iPhoto 6 over there.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Similar Messages
-
IPhoto book order will not accept proper address???
They say city/state/zip is incorrect.....HOWEVER it is correct
Welcome to the Apple Discussions. If you have any text boxes in the book which you haven't used put just a space in them and try ordering again. That is a know issue with the newer iPhoto 08 version but might be affecting your ordering process as well.
You might want to check the iPhoto 6 forum as there may be a specific fix for that issue and iPhoto 6 over there.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Book Order will not Connect!
Created a book and all went just fine.
Now trying to purchase. The book assembly seems to go just fine... then when it is trying to connect... it just keeps going, never connecting.
What could be the problem?
My internet is working just fine!
Thanks for your imput.
TimI submitted the same book twice. The first time (at 150 dpi) it went through fine the first time (with one exception I'll get to below). The second time, after changing the prefs to 300 dpi, I had the same problem you did. I submitted it probably 8 times before it went through. I wonder if this may be related to file size?
I did try deleting the NetAccess keychain but it still failed several more times before the final success, so I'm not sure whether or not that helped. By the way, I should mention that if you try this, read the directions more carefully than I did and use the delete key (or Delete command in the Edit menu) to delete only the selected login. There is a Delete command in the File menu (Delete keychain "login") that will delete the entire keychain and every autofill login you have ever stored!!
When you say it won't connect, is it hanging at the "Connecting" popup or the "Sending file" progress bar that follows? Each time I submitted a book, or tried to, the "Connecting" bar showed the moving blue stripes, but the "Sending file" progress bar stayed gray and never moved at all. The text said "Sending 0 KB of 95.8 MB" and never changed. It looked as if the entire process was frozen. However, checking with Activity Monitor (it's in the Utilities folder) showed that the computer was merrily pumping the file out. I actually cancelled the upload a few times because I thought that it was stalled before I thought to check with Activity Monitor.
G5 Mac OS X (10.4) -
I have a mac book that will not open up DVD's recorded with a presentation. I install the disc in a HP / windows 7 and it works fine. I had my hard drive replaced and since then I cannot open up DVD's. Was there a application that did not get installed? And if so what is the process.
You need DVD Player. It should be in your Applications folder. If it is in there go to System Preferences>CDs & DVDs and for "When you insert a video DVD" make sure DVD Player is selected.
-
how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!
In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified. To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link. Make sure you are check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
-
KO8G - Internal Order will not settle
While trying to settle out internal orders in KO8G for closing, this Error appeared:
NA FF716
Error in assigning the tax group
I searched that error message and found:
"The symptom occurs if in the Customizing for Tax Jurisdiction, the country is not maintained for the determination of the FI tax procedure and if the payer has a Tax Jurisdiction Number."
It is regarding the 1st internal order - it is set up correctly on books but will not settle out. Needs to be fixed before October closing.
What should be done? Any ideas?This is the entire message I received from the end user:
(I am not a finance person, so much of this is un familiar to me)
Today when I went to settle out internal orders in KO8G for closing, I got hit with this error message. It is related to the very first internal order set up in SAP for a DK capital purchase. It was all set up correctly on DK's books, but it would not settle out.
What I did to allow the KO8G transaction to work for closing was to do an accrual entry on DK's books pulling the figure out of 510095-204062 and booking to an open CIP account 160170. This will reverse itself back in October so hopefully you can provide us with what is needing to be done so we can settle it come time for October closing. -
My mac book pro will not recognize
My mac book pro will not recognize my hp printer after years of knowing it's connected. USB port works fine with other connections. I have reinstaled it. What do I do?
Hi ...
Go to the HP site and download the drivers (software) that is specific to your HP printer model > http://www8.hp.com/us/en/support-drivers.html
That way you will have the latest software available for your printer.
Then open System Preferences > Print & Scan - Print.
Select the printer on the left then click - (minus)
Now click + and follow the instructions. You may need to turn the printer off then back on before your Mac recogizes the new drivers.
You may also need to click the lock icon in the Print window in order to make changes. You may be prompted for your admin password.
edited by: cs -
I placed the order for Creative Cloud and it has been confirmed.
But I received this email: Our order processing system currently suffers from technical problems. Your order will be processed as soon as possible. This is my second attempt and my order has not been processed.if you've waited more than 1 business day, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html
-
I have OS 10.8.2 and use wireless at home just fine.
When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
What do I need to do connect via a cable modem?You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).
-
My Mac Book Pro will not power on
My Mac Book Pro will not (boot-up) power on.
What should I do?Do you have the power adapter connected? Does it display a light, amber or green?
Have you checked the battery charge level by pressing the exterior battery level button?
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao. -
My mac book pro will not fully boot up. I have the grey background with the apple sign and the timer going round...but 20 minutes later still no desktop
You could try doing a hard shut down (holding the power button or yanking the battery) and then doing a safe boot by holding the shift key at startup:
http://support.apple.com/kb/HT1455
Also, not sure if this applies in your case, but I've had that happen when there's a USB drive inserted either in the computer or a connected external keyboard. I did a hard shut down, removed the drive and it went through a normal start up. -
I Have just downloaded the latest upgrade (through software update) and now my Mac Book Pro will not boot up !! how can I get out of this ?,
Try starting in safe mode:
Ciao. -
17 inch MAC book pro will not boot up
My 17 inch MAC Book Pro will not power/boot up. The battery is charged and it displays a green light on the power adapter. However, it will not boot up.
Reset the SMC > http://support.apple.com/kb/HT3964
If it doesn't work, probably there's a logic board problem, so it's possible that you need a new logic board. Take your computer to an Apple Store or reseller -
MY new Mac book pro will not save any of teh bookmarks I make in safari. If I make a bookmark, it will not appear until I close safari and reopen it. Then, if I shut my computer down and reopen safari, all of the bookmarks are gone. This has happend multiple times and I don't know what is going on. I would really like to use my bookmarks.
Delete the
com.apple.safari.plist
reboot and start Safari, reset your preferences, instructions are here
Deleting the System Preference or other .plist file -
Mac book pro will not sleep after i installed mavericks
mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off
mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off
Maybe you are looking for
-
ALV Summation button is not working when GRID layout is specified
Hi, I have created a report with Field: ALV Grid Layout. When i dont select anything in ALV GRID Layout. and execute the report. The outout is displayed in ALV Grid. and if i select amt column and PRESS SUMMATION button. im getting the total. Thats f
-
Layout Grid CSS property not suported in IE11
I wanted to define a character grid such that one character is displayed in one cell of the grid. previously the CSS property -ms-layout-grid-mode worked well in IE7,8,9. but the -ms-layout-grid-mode property(https://msdn.microsoft.com/en-us/library/
-
While MRp run which time is taken into consideration(from PIR or from MM)
Hi PP gurus, When we run MRP which time is taken into consideration for a bought out material : From Material Master ( Planned delivery time) or From Purchase Info record : the delivery time mentioned in the PIR .. In my case the MRp run is showing 2
-
Latest perl module for tuxedo available
The latest version of the Tuxedo perl module uses the C tuxedo api and allows you to write services in perl. It can be downloaded from... http://search.cpan.org/~afryer/Tuxedo-2.08/Tuxedo.pm
-
Syntax to display window as model dilog box
hi all what is the syntax to display a window as a model dilog box