BOOK: Problem generating in 8.0.4 (p273) Win XP ??

Is it just me, or is the new patch failing to generate TOCs from a book? As far as I know, I'm doing all the same things I was doing earlier today using 8.0.2 (p273), and the TOC worked fine, then. All I've changed are a few paratag names, and I've updated everything to match.
If this is a real problem, and given the catalog sorting problem discussed earlier, my next question would be: How does one remove an update, go back to 8.0.2 p273???
Thank you kindly,
Elchanan

First, no problems with 8 TOCs at all.
And, rather than expecting a converted book to work out of the box, it would be better to delete the "converted" TOC file from the book and add an FM 8 TOC file, so it can be generated cleanly.
Further, I'd make sure that all the component files are open on the desktop when you update, so that if there are any error messages, you can see what's going on.
Art

Similar Messages

RoboHelp 10: Problems generating Printed Documentation

Environment
Windows 7 Enterprise, Service Pack 1, 64-bit operating system
Office Professional Plus 2010 Versions 14.0.7106.5001 (64-bit)
RoboHelp 10: 10.0.0.287
Visual Studio 2010 Professional. I open RoboHelp from within Source Control (have been doing it for two years).
Problem
Sometime after moving to RoboHelp 10, and even after successfully generating Printed Documentation output, I encountered a major problem generating Printed Documentation from RoboHelp: “Internal error encountered. Failed to generated Printed Documentation”. The error occurred when I tried to generate Printed Doc using my default TOC, which looks something like this:
Topic A
Topic B
Book 1
Book 2
Book 3
Topic C
Topic D
Based on an old Peter Grainge reply to someone about a similar problem, I removed all but the first topic from the Chapter Layout pane and generated the Help. Everything was fine until I got to the topics after Book 3. At that point everything started to fail again. When I removed Topics C, D, etc. from the Chapter Layout pane, the output was built successfully.
I tried moving Topics C, D, etc. to the top of the Chapter Layout pane, and got the same error. I tried creating a new folder and put Topics C, D, etc. into that folder. Failure after failure.
As an experiment, I removed all the Topics C, D, etc from the Chapter Layout pane, but then added them to the Print Document Section Layout pane (not where I want them). The Printed Documentation built successfully.
During attempts to build with Topics C, D, etc. in the Chapter Layout pane, I kept getting a Word error: Word is trying to recover your information. After that there was always a failure.
Selecting PDF as the output did not work when the Topic C, D, etc. files were at the bottom of the Chapter Layout pane.
I create a new TOC and a new Printed Documentation SSL. Failed to generate.
As a matter of reference, I've been generating Printed Documentation from the same TOC for more than a year and so cannot figure out what has changed in RoboHelp or Word to cause this grief .
Has anyone experienced anything like this?
Carol

Dear Peter,
Thanks for following up. Last Friday I finished extensive testing on my own and working with RoboHelp Support. Here's what I sent to Support this morning.
If after reading this screed, you think it worthwhile for me to get a copy from Source Control for you to look at, I will do so. Thanks for offering to look at it.
Environment
Windows 7 Enterprise Service Pack 1, 8.00 GB RAM, 64-bit OS
Microsoft Office Professional Plus 2010 Version 14.0.7106.5003 64-bit--Note: We repaired my current version of Word, in case that was the problem, but did not reinstall Office--we do not think that the Word version is the problem because we generated successfully with other TOCs and when generating individual documents.
RoboHelp 10.0.1.292. Upgraded from RoboHelp 9 in May 2013. Replaced hard drive in September 2013 and reinstalled RoboHelp.
Visual Studio 2010 Professional 10.0.40219.1 SP1Rel (I open the project from Source Control and check files out to a folder on my desktop.)
Issue
Printed Documentation failed multiple times with the default Table of Contents, which contains all the topics in the project. TOC specs are as follows:
Properties: .docx, desktop location, no conditions, embedded images, “Generate a single document”, “Retain hyperlinks”.
330 files, 12 top-level books, 15 second-level books, 7 third-level books, 6 fourth-level books, and 8 fifth-level books
Results
Generation to Printed Documentation does NOT fail for other, module-specific TOCs, nor to WebHelp Pro SSLs for the same sets of topics. In addition, and perhaps more important, generation to Printed Documentation does NOT fail with “Generate Individual Documents” selected, or when there are approximately fewer than 259 files in the TOC.
Did not fail consistently based on any particular topic.
Did not fail consistently based on location of any particular topic in the TOC.
Failed when I created new TOCs based on ‘working’ TOCs. For example, copied a module-specific TOC and then added topics to it from the default (superset) TOC. I did this in case the original default TOC was corrupted.
Failed when I create a new TOC with the same folder/file structure from scratch.
Failed when I created a new TOC with a flat file structure from scratch.
Failed when I retrieved an older TOC from the last release of the product.
Failed when I created new SSLs each time. I did this in case the SSLs had got corrupted.
Failed when I did not open the project from Source Control (removed project from Source Control and worked locally).
Began to see failure when there were more than about 258-263 files in the TOC. For example, successfully generated Printed Documentation with 262 files in the TOC. Added one topic and the generation failed. Removed that topic and added several others, one at a time. Consistently failed. To test this, I created a TOC with all the files in a flat structure, generated a report for the TOC, printed it, and counted the number of files. I then began deleting files and regenerating the Printed Document to try to identify the number of files in the TOC when the generation failed. Successfully generated up to about 258 files and then it began failing. (Occasional successes at 260 and 261, but that may be because I didn’t always consistently remove the Glossary and Index from the Chapter Layout pane.)
Other Comments
(I know that we should generally post non-RH issues to other forums, but in this case I wanted to include all potentially related issues in this posting.)
The first time you generate any type of output, the “Critical error of Source Control Provider. Please restart IDE.” Message appears. This message appears behind RoboHelp. As a result, if the RoboHelp window is maximized, you think that RoboHelp is hung. Forcing a close of RoboHelp leaves the partially generated Word document in an unstable state. When you re-open RoboHelp and try to generate the output again, RoboHelp says that the output is in use. Unfortunately, there is no way to ‘free’ the Word document and you have to restart the computer. In addition, when the dialog box is hidden, even using Alt+Tab to find the dialog box is complicated because you can’t grab it and click OK until RoboHelp completes its processing. The workaround is to reduce the size of the application window so that you can see the dialog box and try to quickly grab it and click OK. That said, as soon as processing is complete you can grab the dialog box and click OK; at that point RoboHelp displays its own error message about the success or failure of the output generation. It is not clear whether the RoboHelp API or Source Control puts up this error message, but it’s definitely a problem until you happen upon the workaround.
RoboHelp does not check SSLs even when I right-click the SSL in the Single Source Layouts pane, click Check In, select the XML and SSL files, and leave “Keep checked out” deselected. The red check mark remains next to the SSL name. In addition, even when I Check In All files before closing the project, the next time I open the project RoboHelp displays a series of Check In dialog boxes requiring me to check them in again.
When RoboHelp hangs during a Printed Documentation failure and the Version Control setting is to check in all files when closing a project (which I’ve now deselected to avoid this problem), Ctrl+Alt+Del indicates that you cannot shut down the program because RoboHelp is waiting for a response. Yes, RoboHelp was waiting for me to check in some files (because of the Version Control setting), but hid the Check In Source Files dialog box behind the application. This usually left a Word document in limbo, forcing me to restart the computer.
At one point RoboHelp stopped saving changes to an SSL after I made changes and clicked Save and Generate. Each time I reopened the SSL, I had to select .docx, etc. all over again.
Carol

Problem generating stubs for Java EJB web service deployed in OAS

I created an EJB web service and I've successfully deployed it in my Oracle App Server. Some of the methods work fine but others produce the ff error:
org.apache.soap.SOAPException - java.lang.IllegalArgumentException: No Serializer found to serialize [classname] using encoding style [encoding]It seems that the objects specified as parameters in the web service methods exposed are the only ones that had stubs generated for them. Other objects I use, which are usually wrapped inside a Vector, did not have generated stubs.
Example:
public String loginUser(UserDTO userDTO) throws RemoteException, NamingException, SQLException;
public String addItems (Vector vecItems) throws RemoteException, NamingException, SQLException; // where vecItems is a collection of ItemDTO objects In this scenario, stubs were generated for the UserDTO class, but not for the ItemDTO class. In effect, calling the addItems method resulted to the exception I mentioned above.
I did a workaround wherein I declared a dummy method which accepted all the types of objects I needed as parameters so all the necessary stubs can be generated, but this fix doesn't feel like it's the proper solution to my problem.
If anyone can help me, it would be greatly appreciated. Thanks!

Crossposted:
Problem generating stubs for Java EJB web service deployed in OAS

How to multiple/ parellal sets of books to generate more than one financial statement based on different (or the same) accounting principles.

How to multiple/ parallel sets of books to generate more than one financial statement based on different (or the same) accounting principles.
My Client needs Parallel Ledger in SAP B1 similar like SAP ECC. Is this functionality available ?

Dear Mr. Nagrajan,
Thank you for your response. I have already gone through documents but not able to understand. Is there any setup for this ? or its just work around i.e. using template and special field in JV i.e. Ref. 1 /2
My doubts :
I understand that Chart of Account structure is one and common for IFRS and other accounting method. We need to create only those account separately ( 2 times with prefix like IFRS revenue account, GAAP Revenue account).
Now at time of entry, Assume some entries / adjustment are specifically for IFRS and not for other ledger. In this case, What need to do ?
You have mentioned about DTW approach but do we need to insert all JV's again with other ledger ?
Someone suggested that if any entry which are specific to IFRS Ledger, We need to user Ref.1 /2 column or Transcation code column and in which we can put IFRS
Based on this, Need to create 2 seperate template for IFRS and other ledger for all report.
This is my understanding of Solution in SAP B1. Please help me to clarify my though process
Please do needful.If you have done implemenation and if you can share doucment, it would be great help.
Email :[email protected]

Problem generating manifest. Could not load file or assembly or one of its

Dear all,
i am using visual studio 2008 on windows7 (32 bit). my project was running very fine but today i received the following error when i build my project
"Problem generating manifest. Could not load file or assembly or one of its dependencies. An attempt was made to load a program with an incorrect format"
i have deleted all the refrences and then added all one by one , all refrences added successfully, but when i added "CrystalDecisions.ReportSource" and build the application i found the above error. '
i will be very thankfull if anyone could help me
Regards.

What version of Crystal Reports?
- Ludek

Need help with this book problem...Pig game...can ANYONE help!??

I need help with the following book problem...could someone write this code for me?? Thanks!!
First design and implement a class called PairOfDice, composed of two six-sided Die objects. Using the PairOfDice class, design and implement a class to play a game called Pig. In this game, the user competes against the computer. On each turn, the current player rolls a pair of dice and accumulates points. The goal is to reach 100 points before your opponent does. If, on any turn, the player rolls a 1, all points accumulated for that round are forfeited and control of the dice moves to the other player. If the player rolls two 1s in one turn, the player loses all points accumulated thus far in the game and loses control of the dice. The player may voluntarily turn over the dice after each roll. Therefore the player must decide to either roll again (be a pig) and risk losing points, or relinquish control of the dice, possibly allowing the other player to win. Implement the computer player such that it always relinquishes the dice after accumulating 20 or more points in any given round.
I realize this is a long code, so it would be greatly appreciated to anyone who writes this one for me, or can at least give me any parts of it. I honestly have no clue how to do this because our professor is a dumbass and just expects us to know how to do this...he doesn't teach us this stuff...don't ask. Anyways, thanks for taking the time to read this and I hope someone helps out!! Thank you in advance to anyone who does!!!

Nasty comments? It's not a matter of not liking you, it's a matter of responding to the
"I'ts everyone else's fault but mine" attitude of your post.
If you are genuine, the program is very easy to write, so, your Professor is correct when he said you should
be able to do it. I'm still very much in the beginner category at java, and it took me only 20 mins to write
(+5 mins to design it on paper). 2 classes in one file < 100 lines. Most of the regulars here would do it in half the time / half the lines.
All of the clues are in the description, break them down into their various if / else conditions. Write it down on paper.
Have a go. Try to achieve something. Post what you've tried, no-one will laugh at you, and you will be
pleasanty surprised at the level of help you will get when you've "obviously" made some effort.
Again, have a go. If you don't like problem-solving, then you don't like programming. So, you gotta ask
yourself - "what am I doin' here?"

Problem generating Key with keytool command

Hi Everyone;
I'm having problems generating a key.
Here's my output.
C:\>keytool -genkey -alias learningIdeas -keysize 1024 -validity 365 -keyalg RSA
Enter keystore password: changeit
keytool error: java.io.IOException: Keystore was tampered with, or password was incorrect
note i already did something with the keystore such that i have generated a key and placed this in server.xml
<Connector className="org.apache.tomcat.service.PoolTcpConnector">
<Parameter name="handler" value="org.apache.tomcat.service.http.HttpConnectionHandler"/>
<Parameter name="port" value="8443"/>
<Parameter name="socketFactory" value="org.apache.tomcat.net.SSLSocketFactory" />
     <Parameter name="keystore" value="C:/stephen" />
     <Parameter name="keypass" value="changeit"/>
     <Parameter name="clientAuth" value="false"/>
</Connector>
any ideas on what I can do to generate this key?
stephen

I have almost resolved this problem. I'm at the last step and getting an error message when trying to import the certificate that I received from verisign into my keystore.
here's my error.
C:\>keytool -import -alias mycompanyname123 -keystore STEPHEN4 -file mycompanyname.cer
Enter keystore password: changeit
keytool error: java.security.cert.CertificateException: Unsupported encoding
but when I double click on this file mycompanyname.cer (which is exactly what I received from verisign, up comes the appropriate certificate
i was able to succesfully able to install it into the microsoft browser and i see it correctly represented and displayed in the certificates section for OTHER PEOPLE.
But I think i have to successfully import it into the keystore for it to work properly right when I start up the tomcaat app is that correct?
any ideas?
Stephen

Offline Address Book problem with Outlook

Hi all.
A strange issue is occuring in my company. Few of my users do not appear in the Offline Address Book in Outlook (in cached mode) but they do appear in the Global Address list in Online Mode or OWA. I have tried to delete the oab files from the local workstation
and downloading the OAB again with no luck. What I find strange is that if I open the udetails.oab file from the user appdata directory with a text editor then I can find the users in there !
So in short, if the Offline Address Book oab files include all users, why isnt Outlook able to find them ?
Regards,
Fred.

Well, I got in touch with Microsoft regarding this issue and it turns out that this is not an Address Book problem as such. The problem is that there is a certain size limit to the Active Directory user object. When that size limit is
reached, users stop to display correctly (or not at all) in the Offline Address Book. There is a Hotfix available for Outlook 2010 that overrides that limit and a Hotfilx for Outlook 2007 is expected in April.
The root cause is in our case that we have a certificate authority issuing user certificates. When users log on to multiple machines they get issued multiple certificates which pile up and finally their AD user object exceeds this
size limit. The quick fix is simply to remove the certificates from the user account in ADUC (Advanced Mode - Published Certificates). When the Offline Address Book has been rebuilt and downloaded all works fine and all users are displayed... The real solution
is to reconfigure the certificate templates not to reenroll new certificates if a duplicate one exists but that requires some considerations based on the needs of your environment.
Hi FMG,
I am having the same GAL issue with only 2 users; however I’m having some further issues. As you suggested, I checked the users published certificates except
that there were no certificates listed for the users at all.
Have you had any luck with a response from a Microsoft rep for this issue, or can you provide any further assistance?

Importing address book problem

Hi, hope someone can help.
I'm trying to import an address book from a Virgin pay as you go SIM into a Blackberry Pearl 8110. I can see the address book when I view the 'SIM address book' option and can dial out from here and the view is very basic not the normal BB address book view. But I can't SMS from this SIM address book.
I've used the wizard to try and import the contacts into the BB address book but it just imports the contact names but not the numbers. If I try and select oneof these names nothing happens, its like the address book has frozen. I also cannot open the menu option when in address book either unless I delete all the individual names that have been imported, then I can select the menu option.
I've also tried adding a contact from scratch on the BB but as soon as I save the data (just name and number) it again goes into freeze and I cant open that contact even though I have just entered it.
If someone sends me an SMS I can reply to it directly from the SMS, but cant create a new SMS taking a contact number from the address book. It just wont open the contact list.
I've just unlatched the BB so I can use it as a phone using Virgin PAYG credit I have.
Can anyone help with this contact address book problem?
Cheers J

Jason70 wrote:
Hi, hope someone can help.
Greetings, and welcome to the BlackBerry.com Support Forums.
Jason70 wrote:
I've just unlatched the BB so I can use it as a phone using Virgin PAYG credit I have.
What does that mean?
It is always helpful to receive help, to include your exact BlackBerry device model # and carrier name, so that when you have a question, that information won't need to be asked up front. Also, stating your device Operating System version is normally another common question, found on your BlackBerry at Options > About, third line down, looks like "v4.x.x.xxx"
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Address Book problem with edit mode

Address Book problem!! Cant edit my contacts or delete them. Help!!
What can i do? Excuse my English.

Ever since upgrading to Lion I am unable to add notes to new contacts or to existing contacts that did not have any notes. Old contacts that already had notes work just fine.
Any suggestions?
Thanks!

Problems transferring to new computer. Is Win 8.1 problem?

Problems transferring to new computer. Is Win 8.1 problem?

Hello wjmonti
What issues are you having for moving your music to a new computer? Check out the article below for different ways to move your music to your new computer.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Regards,
-Norm G.

Frame 9 problem generating books

What does it mean Couldn't open this book because it contains no openable nongenerated files?
How Do I fix the problem?

Ok its simple.
open all the chapters in the book one by one.It will promt you some warnings,keep clicking ok on it.
once all the chapters are open,update the book and you would be good to go.

TOC Book Problem - RoboHelp 8 - WebHelp Pro

Hello, I'm having a problem in a generated build of help to RoboServer 8. TOC books are linking to the previous page of the toc book above that particular book and this rings true throughout the TOC. I didn't add any links and just wanted to books to be just that books and when you click the book the subtopics within that book should display. Anyone have this problem and what can I do? I see that I can link the book to a particular page, but don't really want that. Any suggestions to correct this problem quickly. We just had a release of our product over the weekend and this is causing quite a stir. Thanks, Lana

I have come acoss issues being reported in adobe forums that webhelp output cannot be viewed in IE 10. Fixes are provided for Robohelp 10 @http://forums.adobe.com/community/robohelp/robohelp_webhelp?view=discussions where we are given a link with the fixes @.http://helpx.adobe.com/robohelp/kb/help-visible-using-win-8-ie.html but no fixes are available for robohelp 8. Please provide a similar fix for robohelp 8
Request the adobe development team to get back ASAP as we do not have the timeframe to upgrade to robohelp 10.

Problem Generating PDF Using Adobe PDF as Driver

I am using FM 10, experiencing problems in creating a pdf of a book. I use Adobe PDF as my print driver. The error said that a font,
HelveticaNeueCond, was not available, and could not be embedded. I had never heard of this font as being in my book, but I downloaded it and installed it on my C drive in my WINDOWS/Fonts folder. Still got the same error!
Also a pdf was made up to a certain page and then it failed. When I tried pdf ing that failed page, it worked. Then I tried to pdf the pages in between and it failed in a different spot.
This failure makes no sense.
I need help!

There are hundreds of message similar to this one in the archives, so I'd suggest you start reading those, but in general:
No one can do effective long-distance trouble shooting of your system without all the system details: FM and Acrobat versions, down to the patch levels (do Help > About), your OS, and amount of RAM and free disk space are important also.
If you are running Windows XP, get the Microsoft Hot fix for all PostScript printers and install if before you do anything else.
http://support.microsoft.com/?id=952909 (Gives details on the Hotfix)
http://support.microsoft.com/Hotfix/KBHotfix.aspx?kbnum=952909&kbln=en-us (Direct Download Link)
Reboot after installing it.
Then, or start with these if you're not on XP:
Set the Adobe Acroat printer as your system default printer.
Be sure you are printing to the Acrobat printer with the Print Command and not using SaveAs PDF
On the Frame Print dialog box, check Generate Acrobat Data and UNCHECK Print to File.

Problems generating installation packages with Adobe Creative Cloud Packager

Since friday, I have problems with generating installation Packages for our worldwide disribution.
The download of allways different parts is canceled, so the creation of the hole package is canceled too

Hi KwKn,
Does it work on the machine on which you are creating the package?
Do you have any security software running on the machine?
Also I would request you to go through the below link.
Creative Cloud Help | Packager
Regards,
Anand

BOOK: Problem generating in 8.0.4 (p273) Win XP ??

Similar Messages

Maybe you are looking for