Book profiles change from RGB 1998 to sRGB when exported

My printer guy tells me that when I export a book from Aperture, the profile it attaches is srgb and I want Adobe RGB1998 which I've change the presets to do, but they change on conversion to a pdf file How can I fix this? I need the color space of RGB1998 and srgb is killing my colors. Anyone got an answer to this!!!

In 99% of cases you want the RAW file.
Can I ask why you're shooting RAW+JPEG? In general, unless you have a very specific workflow (i.e. shooting 2000 shots for a sporting event, and getting them to an editor), a RAW-only workflow makes a lot more sense than RAW+JPEG because with Aperture you can create a JPEG from the RAW any time you want.
So keep the RAW file. But Aperture will import them both, and managing that takes more work and effort unless you have a very specific reason for shooting RAW+JPEG.

Similar Messages

How do I find out if a photo in iPhoto is RGB or CMYK color? How do I change from RGB to CMYK?

How do I find out if a photo in iPhoto is RGB or CMYK color? How do I change from RGB to CMYK?

Open the file with Preview, type Command + i to bring up the Info pane and it's color mode and profile will be listed as shown here:
To change the color mode to CMYK you'll need a 3rd party image editor like Photoshotp or GraphicConverter to do it. Why do you need CMYK?
OT

Points for my Profile changed from thousand to Zero

Hi,
I had some 53K points but immediately it changed to Zero(0). Is some update going on ?
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

I replied in your thread here:
http://social.technet.microsoft.com/Forums/en-US/de7bd69f-b600-4514-858d-971299c093f3/points-for-my-profile-changed-from-thousand-to-zero?forum=reportabug
Seems to be happening for everyone.
EDIT: I've sent an email to fissues, I'll post back when I hear something.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

See:
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

Help with Color Settings/Profiles...White's look 'yellow' when exported to PowerPoint as a .png

I am running into this odd occurence and can't seem to figure it out.
First - I am not an expert in the Color settings/Profiles topic but I am thinking there is an issue here.
When I look at this image "McCroreyDigitalLogo.png" in Photoshop the 'whites' appear right.
Then when I import it into ms PowerPoint, the whites look yellowish.
I have done a series of 'tests' and it seems to be that the color profile out of photoshop and the one in PowerPoint are not compatible.
I have reset my Photoshop preferences with no luck/change to the results.
Finally, I did a screen shot out of photoshop and pasted that into Power point. The white appeared correct.
Could use some guidance on how to fix this one. Basically any files I run through PS, when they are imported into PowerPoint, the whites turn yellow.
Thanks in advance

PowerPoint is not a color managed program and can display the color values only in the color space of your monitor without any correction.
Color managed programs like Photoshop correct the color values when displaying them in order to simulate within the color space of your monitor other color spaces, for example sRGB, AdobeRGB, the color spaces of various printers, and etc. For this reason you can not match the color in non-color managed programs to the color of color managed programs but you can do the opposite match the color in Photoshop to PowerPoint.
There is two ways to do this:
One way is if you want the color values in Photoshop to remain the same but be displayed in the color space of your monitor which PowerPoint is using, you can either color proof with or assign your monitor profile to the document.
To color proof choose View > Proof Setup > Monitor RGB.
To assign, choose Edit > Assign Profile, select Profile and from the menu choose the color profile of your monitor. If you are not sure what's the name of the color profile of your monitor, go to the Color Settings, in the Working Spaces section use the RGB menu, scroll up and check what it says after Monitor RGB-
Both proof and assign will give the same result on your monitor but the difference is - the proof is temporary and will last only for the session and the profile, if embedded when saving the file, will stay and when open in other color managed programs including those on other users' computers the color space of your monitor will be simulated and for those users who don't use color managed programs the colors could be way off than if saved with a profile of a more common color space like sRGB.
The other way is If you want the appearance in Photoshop to remain but the color values converted to the color space of your monitor, choose Edit > Convert to Profile, and from the RGB menu choose the color profile of your monitor. This will preserve the appearance and also match the colors in PowerPoint but like proofing and assigning you are not seeing what other users may see on their computers.
It is not possible to see the same colors in color managed and non-color managed programs and at the same time simulate how others using different computers may see the colors because different monitors display color values differently. Color managed programs can simulate a common standard color space like sRGB while non-color managed programs can not.
Edit: Have in mind all this will work properly if you have a color profile that describes correctly how your monitor displays colors. What you did as described in your post #6 is assign a color space that may be different than the color space of your monitor. The result is when working in sRGB color space your color managed programs will match the non color managed programs on your monitor but that doesn't mean that the actual sRGB space is displayed and any other color space simulation could be based on a wrong monitor profile.

Color profile when changing from RGB to CMYK

I prefer to work on images in RGB then change to cmyk once I'm sure i won't need to run any more effects or filters on them. When I save an image the first time, I have the option to embed my color profile with the image. It embeds the RGB profile... the only option as long as I'm working in RGB. What I've noticed though, is that after converting to cmyk, I don't get any warnings or other indication that it needs me to embed the color profile. I need to do a save-as in order to get back to that option.
So the question is... does Photoshop automatically switch to my default CMYK color profile when I convert to CMYK? So when I save, it's now using the CMYK profile?

Save your original RGB file.
Then, RGB file > Edit > Convert to Profile (with CMYK#1) > Save As...
This creates your first CMYK file.
Then, back to original RGB file > Edit > Convert to Profile (with CMYK#2) > Save As...
This creates your second CMYK file.
Then, back to original RGB file > Edit > Convert to Profile (with CMYK#3) > Save As...
This creates your third CMYK file.
In all cases, be sure you have "Embed Color Profile" checked at the bottom of the Save As dialog. When naming a file, it's handy to include some sort of indication as to the color space.
In the end, you have four files: 1 RGB file, 3 CMYK files.

IP Profile changed from 7Mbps down to 2Mbps

Not sure what's going on but my IP Profile has changed overnight. It was slightly over 7Mbs but has dropped to 2Mbps. I have contacted BT about it but am getting nowhere. Can someone here help please, as far as I can see the profile needs resetting by BT were less than helpful when I asked for them to do this?
Solved!
Go to Solution.

This is for the moderator.
Hi many thanks for your help. It's 8.30AM 9 May, unfortunately nothing seems to have changed since you reset my IP yesterday so far, so my IP profile is still 2Mbps. My router has been left on since last Thursday and it seems ok. Router stats and speed test results from today below. I have also done everything asked by BT since last Thursday that is I have changed the filter for a new one, and tried using cable connection. I have tried phoning BT since but I was left on hold, last Friday and yesterday for 18 minutes.
I have also noticed that my Internet usage seems to have trebled from what is the norm which for me is around 7GB per month. I have used 4GB already this month. I have no wireless security issues and have changed my password. I don't know if this ties in?
regards Rob

The network location profile changes from "Domain" to "Private" in Windows 8.1.

I have a network which is centered around a Server 2012R2 installation with the Server Essentials Role installed. I have installed and configured a DNS server which points to the router and open DNS as forwarders.
There are 3 physical computers on my network and two additional virtual ones (the vm's are hosted on the server).
The server shows the domain profile.
VM1 - Server 2012R2 virtual machine core install hosting a SQL server - it shows the domain profile
VM2 - Windows 8.1 enterprise evaluation - Shows the domain profile
Desktop - Windows 8.1 pro with media center - shows the domain profile
Laptop - Windows 8.1 enterprise evaluation - shows private profile
Surface Pro - Running Windows 8.1 pro - shows private profile.
They all have network discovery enabled for all network types.
As I was writing this my surface randomly shifted to domain again. However my laptop shows private (I am writing this from my laptop)
This is a problem because it appears my devices are having trouble finding and discovering other network devices because of this.
All of the devices have the same gateway, dns settings, and subnets settings.
All of the workstation except the VM server have the server essentials connector installed.
Please let me know if there is any additional helpful information I can provide to get this resolved.

IMPORTANT: I found the solution. Another user figured it out and posted the answer on another thread.
Please spread this around to all other Outlook support techs so they know to point people in the direction of the quick (though very obscure) fix to this problem.
See this thread for how to disable graphics acceleration in Office, which iswhat causes the rundll23 error.
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/rundll32-outlook-mail-windows-host-process-error/bf90e1fd-3985-4b15-bc50-f9b3e937a859?tm=1424345216297
Thanks,
Jason

My profile changed from 8Mbps to 0.5Mbps over the ...

Hello,
I returned home after the weekend to find that my BT Broadband connection was very slow and randomly disconnected and connected while browsing the internet. A BT Speed test revealed that my profile is set to 0.5Mbps as the default download speed instead of the original 8Mbps that I had been enjoying for months.
Is it possible to have a Broadband technician to remotely reset my profile to the original 8Mbps download speed? Or will it be necessary to have the technician visit the switch to make the change? I anxiously await a reply...
Thank You!

Hi john46,
And just like that we are back again... to even faster downstream speeds. Check-out the results below:
BT Speed Test Results:
The BT Home Hub 3 has been connected to the test socket of the main socket via a microfilter for almost 3 days now. The main socket is in an awkward location of the house and I had to run a power extension cord to supply power to the router and connect it to a powerline network adapter. Since this is only a temporary arrangement I am concerned that once I relocate the router to its original location the symptoms may start to show up again (i.e., the lower download speeds). Should I leave the router in its present location for a while longer and let the line "settle-down"?
Your thoughts welcomed...

Re: IP Profile changed from 7Mbps down to 2Mbps

I am currently having this problem, could somebody please let me know who to get in touch with. Been emailing and on the phone for the last two weeks, done all that is asked of my new microfilters, tried another router now being asked is there any RF or EMI interference in the proprty that could effect my router. Must add i have never ever had an issue until now which it seams nobody is intrested.
Normal router Draytek
Modulation Set to: G.DMT
Mode: G.DMT Upseed: 448000 Downspeed: 288000 SNR Margin: 27 Loop Att: 33
Modulation Set to: ADSL2 (G.992.3)
Mode: ADSL2 (G.992.3) Upseed: 444937 Downspeed: 287777 SNR Margin: 6 Loop Att: 31
Modulation Set to: ADSL2+ (G.992.5)
Mode: ADSL2 (G.992.5) Upseed: 444937 Downspeed: 287777 SNR Margin: 6 Loop Att: 44
temporary Zoom router shows, switched to G.dmt to see if its stable as advised to try
ADSL Line State:
SHOWTIME
ADSL Modulation:
G.dmt
ADSL Annex Mode:
ANNEX_A
ADSL Startup Attempts:
9
Elapsed Time:
3 days 4 hours 8 minutes 15 seconds
Downstream Upstream
SNR Margin
25.6
26.0
dB
Line Attenuation
36.4
24.0
dB
Errored Seconds
74
27
Loss of Signal
8
8
Loss of Frame
0
0
CRC Errors
0
0
Data Rate
288
448
kbps
Latency
INTERLEAVED
INTERLEAVED

Hi Welcome to the forums
Here are some help pages done by CL Keith http://www.btinternet.com/~cbeddoe/speed/Speed.html
Can you also post the full results fromBT Speedtest speedtester.bt.com
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Is there a way to retain the track changes from a Microsoft Word document when working on a IPAD word processing App?

I am going on a work trip and want to be able to collaborate with my colleagues, almost all of whom will be using Microsoft Word on Microsoft Windows laptops and I want to draft and collaborate on documents. The approach we always take to such collaboration is to use the track changes feature in Microsoft Word that shows changes and who made the changes.As best I could tell apples Pages software ignores the notations added by the track changes features and accepts all changes to the document making it difficult to see what changes were made and by whom.
I would appreciate any suggestions to address this challenge.

I noted from some similar topics that Pages seems to support track changes but that while it reflects deletions made in Microsoft Word, it does not appear to show them -- is there a way to fix this problem?

SD Cond. type changes from non statistic to statistic when creating invoice

Hi gurus!,
I have a problem with a condition type. Though I set it as NON statistic at the procedure, once I create the sales order it's ok but when I create the invoice from the delivery, then the same condition type appears as statistic.
Do you know how to solve this?
Its config is:
On procedure:
Condtype Description Print req. Cont. key
Z001 test description S 777 MWS
Its properties:
http://imageshack.us/photo/my-images/831/screenshot080d.png/
Thanks in advance
Edited by: John Smith on Nov 4, 2011 2:34 PM Reason: not finished

Hello!
After testing many things I debugged the VF01 code and noticed that a code into a standard enhancement was setting the condition type statistic because it has not an invoice cycle (IS-OIL) set. This must be new on ECC 6 where we move some months ago because in 4.72 never happened.
Once I have set the value for this flag, all the flow is working like a charm
Thanks a lot for your answers, this was a difficult one because is specific for IS-OIL installations.
Regards,
John

Dates change from Numbers generated xls file when copy/pasted

I've saved a Numbers '09 file as xls and sent it to an Excel 2003 for Windows user. The file looks great when they open it in Excel 2003. But, when they copy and paste data into a different Excel 2003 file, the date changes about 4 years, which seems to make this a 1900/1904 issue. But why? If Excel 2003 opened up the original xls file generated by Numbers ok, why can't the dates be copy and pasted into another Excel 2003 spreadsheet?

Apple uses a year pattern that starts with the first day of the first leap year in the 20th century.
Microsoft originally adopted a year pattern that began with the first day of the last year of the 19th century (1900) which, although it was a year divisible by 4, was not a leap year.
Later, MS added the 1904 start pattern, but kept the1900 start pattern as well.
What is likely happening in the case you describe is this:
When Numbers traslates the document into Excel format and saves it, Numbers apparenly includes the flag that tells Excl 'use the 1904 start for dates.' Excel open the file, reads the code, and sets the calendar accordingly.
When the Excel 2003 user then copies the data frm that document, the copy picks up only the date serial number(s), and does not get the coded flag identifying which date system is in use.
That data is then pasted into the new Excel document, and with no flag to tell it different, Excel uses its 'normal' setting—the calendar starts on January 1, 1900—and all dates are interpreted as being four years earlier than they were in the original Numbers table or in the first Excel sheet.
I'd assume there is a setting that can be changed in Excel. Where to find it/how to use it would be a good question for an Excel community discussion site. (Although it's possible an answer might arrive here as well.)
Regards,
Barry

How do I change the size of an image when exporting from photos?

In iPhoto I could create jpeg images of various sizes by exporting a photo and selecting the quality of the image and the size of the file. How do I do that in Photos?

In exactly the same way. File -> Export. If all those options are not visible, note the disclosure arrow, indicated below.

How do i keep my RAW files from turing to jpeg files when exporting them to My Passport?

I am an amature photographer and take all my pitures in RAW form (highest quality and more editing capability). I was given a My Passport for Mac external harddrive to transfer all my files to to open more space on my mac book. When importing my RAW files to the Passport they automatically turn to JPEG files. I just re-imported a few files from the Passport back into Aperature and they are still JPEG files Is there something i need to do to keep my RAW files RAW? If not with the Passport, is there another external that would be of better use to me?

When you drag and drop the from Aperture you export the JPEG Preview.
Use the command "File > Export" in Aperture to export the original files.
You can also open an Aperture library in Photos - this will create a Photos library.

Book profiles change from RGB 1998 to sRGB when exported

Similar Messages

Maybe you are looking for