Book View Mode Crashes
Hi all,
I'm having some problems working on a photo book using iPhoto 6.0.2 on Mac OS X 10.4.3.
I'm working with a small iPhoto library of about 1200 photos, all JPEG files. The library is about 3 years old. I probably started off using iPhoto 3 then gradually upgraded the library to iPhoto 6.
I'm having some problems with the photo browser in book view mode. If I move the photo thumbnails around in the photo browser, they don't go where I drag them. Instead, they get wind up 2 or 3 thumbnails over. I don't know if this is happening all over the book thumbnails or just at the very end (where I happen to be working). I've been working on this photo book for about three weeks and this strange behaviour has been going on for the past day or two.
The work-around is drag photos to the book pages and then drag them back to the photo browser.
Eventually, iPhoto will crash.
To me, it seems as if something's corrupt. I trash the various thumbnail files (ThumbJPGSegment.data, Thumb32Segment.data, Thumb64Segment.data) and the iPhoto pref file. (These are leftover workarounds from iPhoto 5.) But these actions don't seem to help.
Any ideas, anyone? Has anyone seen this before? (I did a search for this sort of problem but didn't find anything in the discussion forums. I apologize if this has been covered previously.)
Is there a solution? To me, it seems as if something's a preference or thumbnail file has gotten corrupted but I don't want to mess up my iPhoto library or do something I might later regret!
Many thanks in advance.
Cheers,
dan g.
Many Macs Mac OS X (10.4.3) iPhoto 6.0.2
Hi GreenBug,
People have had problems when moving photos from the photo browser strip to a page then dragging them back to the strip if they change their mind. This will most often cause a crash.
Instead, if you don't want the photo where you placed it, select the photo and hit the delete key. This will pop the photo back up to the browser strip. Many people have reported that this stops the crashes.
Similar Messages
-
Saving Jpeg crashes Finder in Thumbnail View Mode
Hi all.
Anyone have this happen to them?
My finder crashes and relaunches itself when I do the following:
Have a finder window open in thumbnail view mode, open a jpeg image in Photoshop, then resave it. It happens without fail EVERY time I do this.
I do not have the problem in list mode or that other mode (whatever it's called - the one that lets you see the subfolders).
I'm running Panther on a PowerMac G4 and have had this problem from day one. I just did a clean install a month ago and the same issue exists.
B.Actually Onyx appears only "reset" the Spotlight index, it doesn't force it to reindex or anything else that I'm aware of.
I read up a bit more on Spotlight and tried to trash the index and associated files, hoping that it would reindex and all would be fine. However apon reboot it kicked back into it's old routine of cycling and eating up 99% of one of the CPUs.
I decided to finally just disable the spotlight feature completely using the DisableTigerFeatures program.
http://www.macupdate.com/info.php/id/18182
Although I'm disappointed that I can't use Spotlight anymore (never used it much to begin with though) I can happy report that both my CPUs are mine again, my software and games are running snappier, my firewire hdd, iPod, and secondary SATA HDD not unmount and vertify just fine.
Sad that for months and months I basically allowed my G5 Dual Processsor to be crippled by a buggy (in my estimation) piece of software. Finally I feel like my computer is safe to work on and I'm enjoying it for the first time in quite awhile.
Thanks again Francine, had you not pointed my in the right direction I'd still be running a single processor machine that crashed all the time -
Finder crashes in Column View mode
Hello all-
I'm having a problem with my Mac that is getting very, very annoying and I'm hoping somebody can help me out...
As I navigate from File to file in Column view mode, the Finder will often stop responding (relaunch becomes option in Dock) and I'll see the spinning beach ball for over a minute before Finder becomes available again.
It appears like it is having problems generating the file info for the preview window. I've even turned off the Preview option in the last column, but to no effect. I refuse to believe that my machine is so incapable of simply showing me my files. This happens regardless of the number of applications and windows I have open.
Can anybody suggest anything? I recently did a full reinstall of Tiger and the service updates. Hard to think that something would be wrong with the OS already.
Thanks for any help or suggestions you can offer.
-ChipActually Onyx appears only "reset" the Spotlight index, it doesn't force it to reindex or anything else that I'm aware of.
I read up a bit more on Spotlight and tried to trash the index and associated files, hoping that it would reindex and all would be fine. However apon reboot it kicked back into it's old routine of cycling and eating up 99% of one of the CPUs.
I decided to finally just disable the spotlight feature completely using the DisableTigerFeatures program.
http://www.macupdate.com/info.php/id/18182
Although I'm disappointed that I can't use Spotlight anymore (never used it much to begin with though) I can happy report that both my CPUs are mine again, my software and games are running snappier, my firewire hdd, iPod, and secondary SATA HDD not unmount and vertify just fine.
Sad that for months and months I basically allowed my G5 Dual Processsor to be crippled by a buggy (in my estimation) piece of software. Finally I feel like my computer is safe to work on and I'm enjoying it for the first time in quite awhile.
Thanks again Francine, had you not pointed my in the right direction I'd still be running a single processor machine that crashed all the time -
I have a lot of various book mark folders with websites contained within each folder. I am able to sort the websites within each folder alphabetically by name but I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this other than manually dragging them as this is extremely hard for me due to the fact that I am a quadriplegic with limited hand movement dexterity
Bookmark folders that you created are in the Bookmarks Menu folder. "Sort" that folder.
http://kb.mozillazine.org/Sorting_bookmarks_alphabetically -
EOS 70D is stuck on live view mode
I've only had my EOS 70D for two days, but I have taken a 5 hour online crash course on the camera. As of today, I can't get completely out of live mode when taking pictures. I can see out of my viewfinder, but for some reason, the live view area never goes away and stays on screen. Yesterday, it worked correctly, but no matter how many times I press the Start/Stop button now, the live view mode stays up on the screen. Help!
This was my question, but I actually figured it out on my own. I had changed my LCD off/on btn accidentally. It's working now.
-
Any way to get frame accurate in icon view mode?
Does anyone know if there is a way set frame accurate in points in icon view mode? I know that if you are "hover scrubbing" a clip, and then click on it you can use the JKL keys to shuttle through the footage. But is there any way to go frame-by-frame through the footage as well?
I ask because I have a 4-camera shoot where the clips were synced by a slate clap. I'd like to make a multicam clip from the shots so am going through and setting the "clap" as the in point of each clip, and then using them as sync points for the multicam clip. I hover scrub to the general area of the slate clap (works great) then use the JKL key to narrow in "clap" even more (also works great). However, it is nearly impossible to stop exactly on the frame where the slate hits using the JKL keys. So I would like to get in the general vicinity using JKL, and then use some other keys or method to get to the exact frame of the "clap". One would assume that the arrow keys would do this, but they don't.
Does anyone know if there is a way to accomplish this? Thanks in advance for any help.I understand your point, and it never ocurred to me that I part of my normal workflow when doing things like that to more than a few clips is to select all of the clips and put them all in the Source Monitor with a single command. (Select them all, right click, and select "Open in Source Monitor".) So I don't go back and forth between windows. I guess I have been doing it so long I missed that step in the explanation. Sorry about that. Also, please understand that I skipped CS4 and CS5 so when I started using CS6 I have never really been comfortable with the hover scrub for anything serious. Not yet anyway.
I figure that all of the clips will end up in the Source Monitor anyway before they hit the timeline, so why not put them up there and as I finish with each one I close that window and start on the next one.
Those of us who go back to when Premiere became Premiere Pro have been waiting for some of these features a very long time. Slap-your-head it might be to you or me, but Adobe only has so much money to pay engineers and there is always something more important to work on. Like becoming codec agnostic or handling huge frame sizes. Adobe has borrowed many features from FCP, but it is still a work in progress. We just submit feature requests and attempt to convince others to do the same. You can't imagine how much time we spent a decade ago getting people to create the proper sequence. Now you just drag a clip to the New Item button and your sequence is perfect. That is magic to someone like me, who taught people how to use Premiere Pro 1.5 by copying FCP tutorials and recreating them in Premiere Pro (for Lynda.com) using the same footage.
Jim Simon is often quite vocal about things he would rather see done that some of the requests. I agree with him most of the time, but every now and then a little thing I think should be done is not on his list and he will let me know in no uncertain terms why he thinks what he thinks. He can be pretty persuasive and it is difficult to argue with his logic. The Adobe folks read these forums, yes, but they read the feature requests and look to see how many customers want certain things done. Not a bad way to prioritize. Now that more FCP people will be submitting requests, there is a good chance that you will see more features that you want.
So, while it may be obvious to you, it isn't obvious to Adobe until the masses speak. I suggest that you might want to consider being a rabble rouser, getting like minded people to put in the same requests. That is probably the best way to get what you want.
As for going in reverse.... I think that if you have never had some of these things, they are not important to you. They are not all like adding reverse. Some are but some of these are like the tailfin on the 1959 Caddilac. The higher the better back then. But are they necessary? -
Does anyone know of any way to add a quarterly view mode? (in otehr words being able to see 90 days at a time as an added view option - Day/Week/Month/Quarter)
If not, are there any third party workarounds that can modify and provide a 90 day view mode in iCal?
At the very least is there any EFFECTIVE way to communicate and get this easy enhancement added to the upcoming version of iCal.
It is incredibly inconvenient to have to move calendar items to the following month with the restrictive view of only one month. IN other words, if I wanted to move an appointment from February 24 to say March 20 I am forced to manually open the item and type in new dates.
A great system program known as DateBook Pro 4.0 had such a view option and I absolutely miss it EVERY day!I am experiencing the same symptoms - Day, Week, Month and the Today button are all grayed out. It particularly seems to happen if I've left iCal running overnight. The only way I've found to fix it is to re-start iCal. When this is happening, the only way to navigate to a different week (or month) is to use the menu "Go to date" function. I think the onset of this problem relates to an Apple software upgrade , but I can't be sure which one.
-
Currently, the default zoom level when viewing a page of a PDF file is automatically calculated based on the width of the "widest" page of the document. This means that, if the document contains one page that is wider than the others or is in landscape orientation, then the default zoom, when viewing all the other narrower pages, is set in a way so that the page does not use the full width of the screen. This results in very poor experience, because the zoom level and the visible area of the page have to be constantly adjusted for each page. The latest update (at the time of writing) has added some extra view modes, but not the much needed 'Fit width' or 'Fit visible'.
Personally, I can find no reason valid enough to justify the lack of such a view mode. Automatically setting the zoom level based on the width of the current page so as to take advantage of the full width of the screen should be a must have feature for mobile devices, if not the default behavior. The current default behavior regarding the zoom level is pretty much useless, even on 8"/10" screens. There should be a view mode in which the full width of the screen is always used to display the document.
Examples of documents for which the Adobe Reader for Android provides a poor reading experience are:
documents which contain some of their pages in landscape orientation.
publications which, apart from the main content, also contain the full front and back cover in a single page (usually first page which is much wider than the content pages) or any other extra pages like cards or application forms (that are meant to be printed) which usually use an A4/Letter page size etc.
documents which have been cropped by external utilities or scripts so as to eliminate unneeded white margins (in some cases not all pages have the same width).
Please consider fixing the default behavior in future releases of the Reader for Android or add a 'Fit width' or 'Fit visible' view mode.
Thank you in advance.
Message was edited by: George Notaras
Improved descriptions of example documents.To add to this, if you prefer you can separate your JavaScript from your JSF pages.
Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
(This can also be a URI reference to a JavaScript file hosted on a web server)
<f:facet name="metaContainer">
<af:resource source="/js/myJsFile.js" type="javascript"/>
</f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
A solution is to use <trh:script>.
Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
then in place of the above code use:
<f:facet name="metaContainer">
<trh:script id="script1" source="/js/myJsFile.js"/>
</f:facet>Now after a page submit the JavaScript still functions.
Edited by: Matthew Carrigy on 12/08/2009 10:39 -
Mouse no longer scrolls photos in 2 view modes
In A2, if I hovered the mouse over the strip and used the wheel (Revolution MX) it would scroll the thumbnails. If I hovered it over the selected, large photo I could scroll through one-by-one. Same in Viewer mode-scrolling up or down went to the next or previous photo. Now it only works in Browser mode or in the strip in Split View. This has ruined my whole workflow of rating with my left hand while scrolling with the mouse in the right.
I've checked the settings I know, such as Primary on or off, with no luck. Any help would be appreciated.Yes, it looks like scrolling has been changed as you describe.
Dont forget that the arrows and numeric pad (if you have a full size keyboard) work very well. I find rating to be a one handed job using a thumb on the right arrow and a finger for the rating value. Its fast after a bit of practice. -
Canon 6D will not focus or flash in "Live View" mode.
My Canon 6D will not focus or flash in "Live View" mode. I have a canon 430ex II and a E-ttl flash connected with a sync cord for E-ttl function. The camera does simulate shutter action, but no photo is taken. How can I over-come this problem.
Once in a while, after trying to take several photos it will start working, but usually not.
Solved!
Go to Solution.Hi Shadowcat!
Thanks for posting.
It sounds like the AF Method is set to Quick Mode. When the camera is set for Live View Shooting, there are different AF Methods that can be set. In Quick Mode, the camera uses its dedicated AF sensor to focus when you press the shutter button down halfway.
The image on the LCD will be interrupted while the camera tries to focus because the shutter closes and the mirror drops back over the image sensor. This may look as though the camera is taking a picture, but it is not, it is only focusing. No flash is fired during this process either. Continue to hold the shutter button halfway until focus is achieved, at which point the image will return to the LCD. Then you can press the shutter button the rest of the way down to take the picture. The flash will fire and an image will be recorded.
This didn't answer your question? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Remote Panels not working in embedded viewing mode
Hello,
I'm trying to develop a web version of my project using Labview remote panels. I configured the web server properties as it's described here: http://www.ni.com/white-paper/4791/en/
Currently I'm trying to create the web page on the web publishing tool. However when I select the Embedded viewing mode option I get an "Requested VI is not loaded into memory on the server computer" error on the web page that is created. But if I select Snapshot or Monitor viewing mode option the page is loaded without problems.
I'm using Labview 2013 and oppening the web page in google chrome. The VI from which I'm trying to create a remote panel has some subVIs that show the front panel when called. Is there anything I'm forgetting to configure, or do I need to have any plugins instaled on my browser?
Solved!
Go to Solution.Mateus23 wrote:
I'm now developing the web version in HTML 5, using web services to comunicate with my labview application.
There you go, good solution. When doing this remember that you have access to the database on the server. A structure I have found effective is to use the server DB like a dropbox that I write to, and the web server reads from.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Adding a link to another page in View Mode using Destination URI
Hi All,
I have the Search items page in iProcurement, and the Supplier Name is a text field in the search results region. Now I want to display the Supplier Name as a link, clicking on which the user should be taken to the corresponding Supplier details page in View Mode.
Is this something that can be done through personalisation, as in without extending the controller etc. I tried by giving the url of the supplier page in the Destination URI of Supplier Name, and it navigates to the supplier page, but how do I implement the functionality of querying the details of the Supplier in context. That is, what is the url that needs to be used, and what are the parameters that need to be passed etc? What is the approach to implement such a functionality. I have done OAF development, but havent done any personalisation.
Thanks
AnishHi,
I have a custom inventory report where I have a header region with the From Date and To Date column. The user enters these two dates and the data is displayed in the Table region between these two dates. Then in the item column I have a URL link which takes us to the Detail page. I need to pass the item number and the From Date and To Date in that link so the where clause can be set for the detail query. The attribute value for the item passes fine but I do not know how to pass the value for the dates. My URL looks like as below. I have tried different ways as mentioned in metalink or google search but no luck. Tried to capture the value also and it shows as the value as ‘$FromDate’.
OA.jsp?page=/xxbn/oracle/apps/xxbn/consignment/webui/ConsSaleDetailPG&ItemNumber={@ItemNumber}&FromDate=$FromDate&ToDate=$ToDate&retainAM=Y&addBreadCrumb=Y
I would appreciate if I can get some light on this.
Thanks in advance. -
Hi my mac book pro keeps crashing when ever i try and make a new movie on imovies or i try and upload new film clips or pics to iphotos. Do you think this could be the grapics card on the way out?
Anonymous UUID: E82B1281-68C0-576D-6517-47DA41CE124A
Tue Nov 19 20:26:05 2013
panic(cpu 0 caller 0xffffff7f8ce13fac): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0x0a2910de 0x00100000 0x00000000, BAR0 0xd2000000 0xffffff80a9f43000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80869bb230 : 0xffffff800b822f69
0xffffff80869bb2b0 : 0xffffff7f8ce13fac
0xffffff80869bb380 : 0xffffff7f8d44f53d
0xffffff80869bb440 : 0xffffff7f8d51bd9e
0xffffff80869bb480 : 0xffffff7f8d51bdfc
0xffffff80869bb4f0 : 0xffffff7f8d7955be
0xffffff80869bb620 : 0xffffff7f8d53fd41
0xffffff80869bb640 : 0xffffff7f8d45608d
0xffffff80869bb6f0 : 0xffffff7f8d453bae
0xffffff80869bb8f0 : 0xffffff7f8d455cb4
0xffffff80869bb9e0 : 0xffffff7f8d97d980
0xffffff80869bba40 : 0xffffff7f8d97a702
0xffffff80869bbad0 : 0xffffff7f8d964fd6
0xffffff80869bbb10 : 0xffffff7f8d95bf1b
0xffffff80869bbb70 : 0xffffff800bccc226
0xffffff80869bbb90 : 0xffffff800bccd821
0xffffff80869bbbf0 : 0xffffff800bccb28f
0xffffff80869bbd40 : 0xffffff800b8b6008
0xffffff80869bbe50 : 0xffffff800b826bb1
0xffffff80869bbe80 : 0xffffff800b8139b5
0xffffff80869bbef0 : 0xffffff800b81e003
0xffffff80869bbf70 : 0xffffff800b8c921d
0xffffff80869bbfb0 : 0xffffff800b8f3e26
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f8ce06000->0xffffff7f8ce18fff
dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f8cdf0000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f8c6c2000
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8beba000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f8cd5a000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f8ce01000
com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f8d3fe000->0xffffff7f8d66cfff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8beba000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f8cdf3000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f8cd5a000
com.apple.nvidia.classic.NVDANV50HalTesla(8.1.8)[3666E0FC-87C7-3329-BD8C-2F1ADE D100A4]@0xffffff7f8d66d000->0xffffff7f8d919fff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f8d3fe000
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8beba000
com.apple.GeForceTesla(8.1.8)[67BAF872-A238-3787-AB74-22297A51FE8F]@0xffffff7f8 d91a000->0xffffff7f8d9e4fff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f8beba000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f8cdf3000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f8cd5a000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f8d3fe000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x000000000b600000
Kernel text base: 0xffffff800b800000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 22156514085675
last loaded kext at 11181904536407: com.apple.driver.AppleUSBTCKeyEventDriver 240.2 (addr 0xffffff7f8da18000, size 12288)
last unloaded kext at 11264041511655: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f8da49000, size 57344)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AGPM 100.14.11
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleIntelHDGraphics 8.1.8
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleHWAccess 1
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleIntelHDGraphicsFB 8.1.8
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.iokit.IOSurface 91
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
System Profile:
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545032B9SA02, 320.07 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
USB Device: Hub
USB Device: My Passport 0748
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
Thunderbolt Bus:
This was the top one.
Thanks
kennard -
My Mac Book Pro keeps crashing when I update 10.7 to 10.7.3. This happened thrice.
My mac book pro keeps crashing as soon as I update the OS from 10.7 to 10.7.3. It happened thrice and now I am not even able to reinstall the OS. It keeps downloading the additional components and keep increasing the time from 30 mins to 1hr 40mins.
MacBook Pro
MacBook Pro Apple Support
Lion OS X Communities
Apple Support Lion Installation and Recovery
Apple Support Lion -
How to sort clips in icon view mode in Premiere
I am trying to sort clips alphabetically or by metadata in the icon view mode. When I switch from list view to icon view, premiere seems to arrange the clips randomly, not even alphabetically, which is frustrating because I can't even see the entire clip name. I love icon view mode, and it's nice to be able to drag the clips around, but I would like even more to be able to sort them.
You can't sort in Icon view as their are no 'columns' to sort by. All you can do is move then around manually.
Maybe you are looking for
-
Left Arrow Interactive Buttons in InDesign CS5.5 Backwards type
Does anyone have a solution to the backwards type that appears in all left or previous page arrows in the InDesign Interactive Button Section? Is this a glitch in the software. It seems the left buttons were created by flopping the right arrows...thu
-
One of my apps takes up double the space it should be?
I recently downloaded an app called "Horn" (I downloaded the version that costs money, not the free one). Its a game. Anyways, on itunes it says it uses 1.02gb of space. But after I downloaded it onto my iphone it is taking up way more. Double in fac
-
IPv6 Usage on The Verizon Cellular Network
Hi, I'm trying to create an application that connects from a host to a mobile Android phone on the Verizon cellular network. This device uses only the 3G network and has its Wi-Fi turned off. The Android device has a listening socket. As far as I kno
-
Hi I am looking for pointers in building a MDB Bean, pointers in this regard, will be of great help. Thanks sunder
-
Enable form personalisation in vision11.5.5
Hi gurus, Can any one pls tell me what profile setting is required to enable form personalisation in vision instance. Message was edited by: user464343