Booking outbound goods via IDoc

Hi,
is there any possibility to book the outbound goods via IDoc? Is there a standard?
Thanks in advance.

hi,
sure there is - even more then one
you can post goods issues with 2 types of idocs:
delvry03
or
sdpiid01
I tried both and they can both post a goods issue for an outbound delivery
if you just want to make a simple movement you can always try MBGMCR02 IDOC
which is used for material movements
Regards,
Michal Krawczyk

Similar Messages

  • Auto Packing in outbound delivery via IDOC

    Hello All,
    I got a requirement for Auto-packing in outbound delivery via IDOC process.
    Can anybody through some light on the above requirement in finding Message type, process code and so on...
    your every suggestion or hint will help me to fulfill the requirement.
    Thanks in advance.
    Best Regards
    Suresh.

    Hi,
    Auto Packing message type: SDPACK
    Process code: SDPA
    Basic type: SDPAID01
    Regards
    Suresh.

  • Outbound goods issue IDOC

    Hi
    Which message type should i use to sent goods issue idoc to an external system?

    HI
    GOOD
    KOMIM - CHAR1 - Transfer pick quantities to delivery / post goods issue (as of release 4.0)
    If you set the indicator KOMIM to 2, the IDoc can no longer be use for mass processing: If you want to post the goods issue for an outbound deliver via the IDoc, you can only transfer a single transfer order in the IDoc, for each IDoc and communication activity.
    go through this link
    http://www.sapgenie.com/sapedi/message_types_masterdata.htm
    thanks
    mrutyun

  • Help needed on Outbound Goods Receipt (IDoc)...

    Hi Experts,
      Can we use the message type WMMBXY and IDoc type WMMBID02 for Outbound Goods Receipts scenario also (Sending Goods Receipts information to target system).
      Because WMMBID02 seems to be for Inbound going by the documentation in WE60. Can we use this for outbound as well? All the field mapping is perfect with respect to this IDoc and all the required fields exist in this IDoc.
       I am struggling to find a suitable outbound process code and processing function module to trigger Idoc from MIGO Transaction once the goods receipt is created / generated.
      Please advice me on how to achieve the above functionality.
    Thanks in Advance.

    Hi,
    check with this link it might be helpful to u ...
    <u>Purchase Order
    Re: Problem to send idoc for a Good Receipt created
    https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=1279261</u>
    Hope this will surely help u ...
    regards,
    sana.
    reward for useful answers...

  • Unable to update WADAT_IST in Outbound Delivery via iDoc WHSCON (DELVRY03)

    Processing iDoc WHSCON (DELVRY03) to update an Outbound Delivery and post Goods Issue, the field ACTUAL GI DATE (WADAT_IST) is not updated. I am using segment E1EDT13 of iDoc WHSCON to inform dates.
    Can anyone tell me if there is any other segment, field or qualifier in the structure of of iDoc WHSCON to inform WADAT_IST?
    Thanks in advance.
    Best regards.

    I dont think it is possible to achieve this.  For more information, have a look at the following note:-
    Note 1839738 - Error HUSELECT005 occurs when using existing HU in SHPCON (WHSCON)
    G. Lakshmipathi

  • Create outbound delivery from IDOC

    i want to create outboud delivery from incomming idoc..is DELVRY02 idoc type and shpcom message type will do this ..after crating the delivery i aslo need to do PGI..
    please tell me this idopc type and message type will do this or not?
    Thanks,

    Hi,
    I also have the same issue - I would like to be able to create an outbound delivery via IDOC/BAPI although cannot find the means to accomplish this.  Is there a standard process available to generate an outbound delivery without reference (VL01NO)?  I would like to avoid writing custom code if possible.
    Thanks!

  • Sending Outbound FI Documents IDOC via ALE

    Hi all,
    We would like to send FI documents via IDOC. However, the message types we found, (FIDCC1,FIDCC2,FIDCMT) do not have outbound function. In addition to that how can we trigger IDOC, after posting FI documents .
    Thank you for your help...
    Best Regards,
    Didem GUNDOGDU
    mail: [email protected]

    hi, the outbound function for FIDCC1 FIDCC2 is list as followinig:
    FIDCC1     FI_IDOC_CREATE_FIDCC1
    FIDCC2     FI_IDOC_CREATE_FIDCC2
    But still can't find the FIDCMT, maybe you can create a customize function reference to two others.
    About trigger the IDOC sending, you can add the call function into a proper user-exits.
    Help it can be helpful

  • Error message mes when trying to send PO via IDOCS to another system?

    Hi Abap expert,
    I am getting wired message what I ma trying to send PO via IDocs to other SAP system.
    I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
    in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
    'No communication data has been defined for transmission medium 6'-----
    The LED on "PO:output screen' is YELLOW and never gets green.
    Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
    Thank you much eveyone!
    Boby

    Hi,
      Go and check it in NACE tcode, whether , Condition type, output types are maintained or not? if not maintained, Maintain it for 6 -PO for EDI.
    Hope this is the error you are getting.
    Thanks
    Manju

  • BADI via IDOC ? - WORKORDER_GOODSMVT

    Hi to all,
    I've got BADI WORKORDER_GOODSMVT implemented,
    Using method backfush I'm evaluating reservation numb.
    in structure CT_COMPONENTS, and all it's working pretty good by starting transactions CO11N,
    Real issue is I need this process working via IDOC,
    - IDOC is PPCC2PRETEVENT for PO confermation -
    I wished BADI should've act anyway, but via IDOC it doesn't seem been senstive, or getting involved,
    Has anybody any clue if  this BADI should be used via IDOC
    or how to make it work?
    Many thanks in advance,
    Sergio,
    Edited by: sergio atzori on Aug 29, 2008 1:58 PM

    In the PAI of screen their are so many customer exits available. You can implement any based on your need.  In inlcude LCORU_SI10 MODULE customer_exit_after_check INPUT. It is calling FM
    CO_RU_PROCESS_CUSTFUNC_CHECK2. Inside this FM so many exits are their use according to your need .
    Nabheet

  • ME23N Error when trying to send PO via IDOCS to another system?

    Hello Experts,
    I am getting wired message what I ma trying to send PO via IDocs to other SAP system (XI)
    I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
    in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
    'No communication data has been defined for transmission medium 6'-----
    The LED on "PO:output screen' is YELLOW and never gets green.
    Can someone tell me how to overcome this and send my  PO Idocs?Please some more details will be appreciate it!
    Thank you much  eveyone!
    Boby<b></b>

    I just got the same problem. Everything worked fine when i was using message type ORDERS01, but when i changed it to ORDERS05 this problem started happening.
    This might solve your problem. If you have it solved out can you tell us the solution you found??
    regards,
    Diogo

  • T-code ME23N message when trying to send PO via IDOCS to another system?

    Hello MM Experts,
    I am not sure if my question is more for ABAP guys , but since it is MM related  I decided to share it with MM experts as well.
    I am getting wired message what I am trying to send PO via IDocs to other SAP system (XI)
    I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
    in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
    'No communication data has been defined for transmission medium 6'-----
    The LED on "PO:output screen' is YELLOW and never gets green.
    Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
    Thank you much eveyone!
    Boby<b></b>

    Hi Boby ,
    TRY going thru this link and check for the details given in it wether they are in place or not specially in the message controls, viz: application EF ,message type NEU and process code ME10
    http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7c9f43d711d1893e0000e8323c4f/frameset.htm
    regards
    kp

  • FI Invoices correction to send via IDoc vs OSS Note 114814

    Hi All,
    I would like to send Financial Invoice Corrections via IDoc and I am looking for some guidelines and technical explanation on how I should proceed.
    I found some explanations in OSS Note 114814 and on other forum threads but I am kind of confused on what I need to do exactly.
    I understood that FM EXIT_SAPLF050_008 is involved in the process and also IDoc type FIDCCP01 and FIDCCP02 but I do not know what need to be enhanced in the FM? Does someone have any coding example?
    Where exactly is FM EXIT_SAPLF050_008 being called (TCode)? Is it in FB60? I cannot find the enhancement point in this case.
    Do I only have to create a project in CMOD and activate it and that's it? I do not know what I need to do in the function module.
    Thank you in advance for your guidance. I am a bit lost here to be honest.
    Best regards,
    Sylvain

    first of all u have to find out the user exit.and then if u need to add fields ,then u can write the code here. and then determine the outbound partner profle using tcode WE20. AND then u can u can assign those things in bd64 bussiness model.and if need filters u can set there.
    Regards,
    Jampani.

  • How to book missing goods in SAP

    Some goods in one  inbound shipment are missing due to the transportation, therefore I only booked the received goods via VL32N by doing Post goods receipts and keep mising goods are still open in PO. Now the transporation confirm these items are lost and can not find them back.
    Would you please advise how to book these missing goods in SAP against the credit note for the compensation from our vendor.
    Thanks for your help in advance.
    Best Regards,

    Hello,
    yes, I have an idea. Is there a column tree control displayed
    on this screen? In this case using an ITS PL24 might help,
    I remember an error with this null icon solved with ITS 620 PL24.
    best regards
    Tobias

  • How to do debugging for sending inbound or outbound email via ERMS?

    Hi Colleagues,
    I send an email to '[email protected]' with email titile 'CIM: 318238 2013', and want to display inbound email in email assignment block within CIM Service Request 10001503 in ICX. But it fails to be displayed on Web UI. And there is no problem to browse inbound and outbound emails via t-code SCOT as below.
    If I send an email to '[email protected]', there is no problem to display inbound email within one CIM Service Request in ICP as below.
    One related class ZSCL_CRM_ERMS_AH_CIM_CSS=>IF_CRM_ERMS_SERVICE~EXECUTE is used to implement this function, I don't know how to do debugging when sending inbound or outbound email? Could please tell me more detailed steps?
    Kind Regards
    Andie

    Hi Fabian,
    Thanks for your reply.
    How can I add this method ZSCL_CRM_ERMS_AH_CIM_CSS=>IF_CRM_ERMS_SERVICE~EXECUTE to the list in t-code SM50 for doing debugging?
    And another question is that I cannot attach inbound email to CIM Request via ICX email address '[email protected]', but no problem to send inbound email using ICP email address [email protected] as below. Is there any authorization issue for this case?
    Kind Regards
    Andie

  • Creation of sales order via IDoc ORDERS05 - specify a reason of rejectio

    Hi,
    I want to create a sales order via IDoc (type:ORDERS05), i specify for an E1EDP01 segment a reason of rejection (ABGRU),
    The sales order is created succefully by calling the FM IDOC_INPUT_ORDERS but the order quantity of the item where i have specified a reason of rejection is equals to 0.
    Is this normal? i want that this will take 3 value either 0?
    Could anyone help me?
    Thx

    Hi,
    Thank you for ur answer.
    I've followed the procedure that you have explained and the Quantity 3 have been succefully passed to VA01 but is set to zero when i execute the next OK-CODE (=UER2, i think it is llike Enter button ). I simulate the same procedure by creating a sales order on VA01 and i've finally found the problem : at item level, if i enter the Material (MATNR), the order Quantity (KWMENG) and the Reason of rejection (ABGRU), the quantity is set to zero after clicking the enter button ; but if i enter only The material and The quantity followed by enter button, and enter after the Reason of rejection, it works fine, the Quantity doesn't change.
    What is the solution that you propose to me?
    I've try this one on debugger mode:
    The FM which interpret the Idoc create the sales order by CALLING TRANSACTION 'VA01' USING bdcdata....
    I've modified the bdcdata to implement the sequence of the steps before (MATNR + QTY <ENTER> ABGRU <ENTER>).
    1. Is it possible to code this modification?
    2. Is there a way to structure the Idoc for having this sequence in bdcdata?
    Thanks in advance!
    Narivelo

Maybe you are looking for