Booklet 3G: right side USB slot stopped working. H...

Didn't noticed the moment I started to experience this, but I have a problem. My right side USB slot, that is near to power connector stopped working: it cannot recognize and work with any equipment. Flash drives and other peripherial, which have a light indication does not light up, not even a blinking. Restarting, putting out battery for 10 minutes does not help. Even in BIOS mode any USB device light indication does not work. Other slots are working properly: device light indication works, the devices are detectable in Windows. Help... please. Any ideas how to fix, or at least to test the right side USB port?

Probably the easiest way to test is to insert a BOOTABLE usb stick/pen (not a usb disk drive) into the USB slot, reboot and at the NOKIA screen hit F12, which will take you into the boot options.
You should see your hard drive listed and your USB Device and you can choose which to boot from. If you don't even see your USB device, that is not a good sign and the port is likely to be faulty.
Just make sure that you have a proper working bootable usb stick. You can check that the same works when you follow the same procedure by testing the other usb ports.

Similar Messages

Satellite P850 - right hand USB ports stopped working

I have a new Satellite P850, after a short period the two right hand usb ports stopped working, I only had a wireless mouse plugged into them at the time. Is there a reset for these ports, I have tried uninstalling and reinstalling, no change.
Any one have any thoughts.

First of all, I don't think you should have done that.
The solution, either a full system recover (probably not necessary) or reinstall the drivers manually. Since they are USB 3.0 (I guess for what I googled about the P850) they use different drivers (specially if we are talking about the sleep and charge ones) so go ahead and download them from toshiba website, that should solve it...

USB SLOT STOPPED WORKING PLEASE HELP ASAP

I have a mac book pro (bought in 2012) and my usb slot (the one close to the sd card slot) has stopped working. I was wondering what can I do to maybe fix this, and with whatever i have to do delete my files?

Try unplugging all peripherals and resetting SMC.
http://support.apple.com/kb/HT3964

Compag Laptop Right Side USB Port not working

I have a week old Compaq CQ56-115DX. Today for the first time I tried using a flash drive, first in the port on the right side. I didn't get any tones or pop-ups, like you'd normally expect. Then I tried the two on the left side. No problem with them. I wonder if this right-side port has some special configuration, like for some specific use that wouldn't respond to a flash drive. I see no alerts (yellow triangles) in Device Manager. I have read a few things on the Web about reinstalling USB devices, but thought I'd check here first for advice.
Solved!
Go to Solution.

That wouldn't be the problem (a dedicated port). The frontside ports of some machines have less power then rear facing ones in general, due to how they are connected, but in your situation, this wouldn't apply. I would definitely try the reinstallation of the USB drivers (uninstall and allow to refind) and if not, bring it back to the store since by your post, you indicate it's within the return period (14 days from date of purchase). Definitely, all your USB ports should be working.
To receive your in-store service, you will need to take your computer to your nearest Best Buy location. When you arrive at the store, please take your computer directly to the Geek Squad counter where one of the Counter Intelligence Agents will be happy to help you. I would take everything with you (box and all) in the event that an exchange is needed of that device.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Right Side USB Port not working

I own a Portege Z835 P330. The USB port on the right side of the laptop does not work, but the ones in the back are fine. Am I missing a driver? How do I fix this? (my computer runs on windows 7)

Try the suggestions in this article starting from "Uninstall and Reinstall the USB Controller."
How To: Fix USB Problems in Windows 8, Windows 7, and Windows Vista
- Peter

MacBook Pro Retina USB 2.0 devices not working in right side USB port

4 days ago I bought MacBook Pro Retina 15".
When I plug USB 2.0 device to right side USB port, it does not work. OSX does not recognize it, iPhone does not charge, and so.
When I plug the same USB 2.0 device to left side USB port, it works.
When I plug USB 3.0 device to left or right side USB ports, it works without a problem.
Does anyone have this same issue? How did you resolve it?

I have a similar issue with a 13" Retina. Both my ports work OK for most USB devices but the right one won't work with a USB external HD (Time Machine backup). Very consistant.

Right Side USB Ports Don't Work on my DV7 6b32US

I just bought a DV7 6b32US.
It's on Windows 7 Home Premium.
The left hand side USB slots are okay. but the two on the right side do nothing at all. No message - nada!
It seems to be a common issue, but I have no resolution to it.
Also, annoyingly, when I logged on to the HP site to try and find drivers, the laptop's serial number is recognized as a Compaq.
Anyone able to help?
Thanks in advance

Hello everyone. I understand you're having issues with non-functional USB ports. I suggest trying the following.
Go to Device Manager.
Expand the "Universal Serial Bus Controllers" section.
Remove all "host controllers."
Shut down the notebook.
Remove battery and AC power.
Hold power button for 20-30 seconds.
Replace battery and AC power.
Boot notebook and allow Windows to reinstall the host controllers.
Reboot one more time.
Verify that this resolves the issue.
Let me know the result. I hope you all have a Happy Holiday!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

HP Pavilion DV7 1240us Express Card Slot Stopped Working

My express card slot stopped working.
The tech I was working with for the HP tuner card seems to think it is a driver or hardware issue.
Please see the email string below.
I tried all I know to get the slot to work, but I do not know which driver for it.
Please help me.
Thanks in advance.
Below are the emails.
Thanks, the problem is I do not know which driver it is.
I looked through the entire device manager tree, and do not know which driver controls the express slot, can you send me in the right direction?
I have an HP Pavilion DV& 1240us laptop.
Any direction would be greatly appreciated.
----- Original Message -----
[Personal Information Removed]
Sent: Monday, September 24, 2012 5:14 PM
Subject: RE: Ticket: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Without inserting another device into the slot the only thing I can think of is checking device manager for the drivers for that express slot and see if they are installed or reinstall the drivers.
If the device works on another laptop but continues to have problems on the first one then there must be something going on with the express slot on the first laptop.
Regards,
Jorge
[Personal Information Removed]
Please include previous correspondence when replying.
From: J[Personal Information Removed]
Sent: Friday, September 21, 2012 5:44 PM
To: [Personal Information Removed]
Subject: Re: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
No I do not, have you had this type of issue before?
Could it be missing or corrupt drivers?
Is there a way to test the slot without a device, checking drivers etc..
----- Original Message -----
[Personal Information Removed]
Sent: Friday, September 21, 2012 4:41 PM
Subject: RE: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Do you have another express card device that you can plug into the laptop in question and see if something malfunctioned on the slot possibly?
Regards,
Jorge [Personal Information Removed]
Please include previous correspondence when replying.
From: JrSonic [Personal Information Removed]
Sent: Friday, September 21, 2012 11:43 AM
To: [Personal Information Removed]
Cc: z1r1200cc
Subject: Re: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Yes it is connected directly, it does not even get recognized by device manager.
No default beep when plugging and unplugging.
IT USED TO WORK NO PROBLEM.
It will work in another laptop.
I am a tech by trade, so if I have to edit the registry, etc.. let me know.
Right now I am baffled, what can I do.
From: [Personal Information Removed]
Sent: Friday, September 21, 2012 10:01 AM
To: [Personal Information Removed]
Subject: RE: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Hello,
Are you making sure to connect the 1500 directly into the express slot in the laptop and into a usb converter?
When it is plugged in does anything appear in device manager with a yellow mark next to it? Is it being listed under sound, video, game controllers at all?
Regards,
Jorge [Personal Information Removed]
Please include previous correspondence when replying.
From: Joe [Personal Information Removed]
Sent: Wednesday, September 19, 2012 7:18 PM
To: Danger1
Subject: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 App: wintv6 Country: usa [senderbase]
Name: Joe
Email: [Personal Information Removed]
Product: HVR-1500 (77xxx)
Application: wintv6
OS: vista64
Country: usa
Problem description: My tuner stopped working,I used HWclear to no avail.
The tuner works in another laptop, so it is not the hardware.
Will not make the customary sound when plugged and unplugged.
I am very PC savy and tried all I know, driver reinstall etc..
Please help.
Thanks

Hey there,
Can you explain more on this issue? I see by the emails the Express card slot is not functioning. What you are using in the card slot? Is the the HP TV Tuner card? If so, do you have another express card handy so you could test to see if it was the card or the slot? If your missing the driver you will need to use the HP Recovery CD to reinstall the TV Tuner driver.
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have a Pavillion dvd Model 1245dx. USB ports stopped working. How can I fix this?

My USB ports stopped working. So did my DVD drive. Any ideas how to fix this?

Back up all data before proceeding.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time ▹ Time Zone
Check the box marked
          Set time zone automatically using current location
if it's not already checked. If the box is checked, uncheck it and then check it again. Test.
If the correct location and time zone aren't shown in the preference pane, then either Wi-Fi is turned off, or you're not within range of a network in the Location Services database. Under those conditions, the computer can't determine your location.
Credit for this idea to ASC member Easyas314.
Step 2
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.Maps
Right-click or control-click the line and select
         Services ▹ Reveal in Finder
from the contextual menu.* A Finder window should open with a folder named "com.apple.Maps" selected. Quit the application if it's running. Move the folder to the Desktop, leaving the window open. Relaunch the application and test. If there's no change, quit again and put the item you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the folder you moved. The list of recent places displayed in Maps will be lost.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Modem problems on Right Side USB port

I have mentioned this problem in a couple of other threads here, but I just got some news from Apple, so I thought it might be worthwhile to start a new thread. As you can see below, I have a MacBook Pro/15"/1.83, running 10.4.7, manufactured in week 13. When I went on a trip to the "Mainland" (I live in Hawaii) last month, I discovered that the USB port on the right side of the computer didn't work properly with my Apple USB modem. While I could get a dial-up connection, I couldn't maintain it, and it would hang up within a minute or two. Everything worked normally on the left side USB port. I brought the computer into the Honolulu Apple Store, and they confirmed the problem. They also booted the computer off an external drive, and it worked fine. I wiped the drive, and reloaded everything, and the right USB port still didn't work. I then sent the computer in for repair, twice now. The first time they also wiped the drive and sent it back to me. Second time, they kept it for 2 weeks, but were unable to find a problem. Sure enough, I still have the problem on the right side USB port. However, I also discovered I could do a backup of my user folders (~3 GB) onto an external USB drive from the right port with no problem.
Anyway, I just finished speaking with the Apple Rep, who told me there are other MBPs with the same problem, and they are investigating it. They said I should keep an eye on the Apple Support site for possible software/hardware fixes.
Hope they fix it soon. I do want to say that the people I spoke to have always been helpful.

Hello...
Even though I just got this USB Modem yesterday (as I have a trip to a place with no wireless or ethernet connection), and I haven't had the chance to test things out enough, I would like to report that I have the EXACT same problem, although I did connect several times from the RIGHT-side port (and even so, it was only for a few minutes, if I connected at all).
The LEFT port has now worked for 24 minutes straight, so, I think that that is the issue. There is a clear difference between the RIGHT port and the LEFT port, and I seriously doubt that it is the service provider.
I will continue to use the LEFT port until I find out more about what is going on. Very strange indeed.

Right side USB port does not recognize mouse while in Vista

Ok, heres the deal. I use a corded USB mouse with my MacBook Pro. I am right handed, so I usually plug the mouse into the right side USB port. It works just fine while I am booted into OSX, but while in Vista, the mouse is not recognized at all when it is plugged into the right side. The mouse still works on the left side port just fine.
The weird thing is that I can still use that same right side USB port for my flash drive or iPod or anything else. Just not my mouse. Anybody else have this issue or have any input?
Thanks

Am I the only one with this problem? I am going to try to uninstall the mouse drivers in vista and then reinstall them and see if that does anything.

HP Pavilion dv6 All 4 USB ports stopped working

Hello,
I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.
Could anyone offer a solution or suggestion, please?

Hello,
I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.

USB Ethernet stop working after 10.7.5 update

After updated to 10.7.5, my usb ethernet stop working, and always shows it doesn't connect.
Reinstall 10.7.5 make no difference.
How do I solve it?
Thanks!
Yu-Hsuan

Or download it directly from ASIX Electronics instead of driversworld.us.
Product family: USB 2.0 to fast Ethernet
Product name: AX88772
URL: http://www.asix.com.tw/download.php?sub=downloadsearch&PSNoID=101
I installed it and my AppleUSBEthernet started to work.
The error i had (sudo dmesg):
AppleUSBEthernet::monitorLinkStatus - Link down, Device b470200
0 0 AppleUSBEthernet: monitorLinkStatus - Link partner register is bad, re-trying...
0 0 AppleUSBEthernet: monitorLinkStatus - Link partner register is bad, trying to reset...

A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port. WHen we plugged it into the port on the keyboard, the device works. Why?

A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port. When we plugged it into the port on the keyboard, the device works. Why? Obviously the device is operational. Could the USB port have burned out from having too much power drawn? If so, is it reparable?

It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

USB Video stopped working with 3.1.8 update

I have been using iChat video with my USB camera for a while with the help of iChatUSBCam. The new update of iChat (3.1.8) included support for USB cameras and once installed my USB camera stopped working with iChat. It just reports the camera is in use by another application. I've been browsing for answers for a while and have tried many things:
- Restart in various combinations of unplugging and plugging in the camera
- Reinstalled the Macam driver
- Reinstalled Quicktime
- Uninstalled iChatUSBCam (since iChat is supposed to work without it now - I think...)
- Reinstalled iChatUSBCam (v 2.2.1 - current)
It's a Logitech Quickcam for Notebooks Deluxe. It continues to work fine with Skype and the the Macam camera tool. I'm using Skype for now (on tour for 6 weeks and use it to video call home) but the quality is crap compared to what iChat used to do.
Thanks for any help you can give.
Stranded in the UK with no decent video chat
Matthew
Powerbook 12" 1GHz - 1.25G RAM Mac OS X (10.4.9) Logitech Quickcam for Notebooks Deluxe

Some people have reported that Updating iChatUSBCam
and deleting the Macam drivers and then the
com.apple.ichat.plist is the way to go.
Thanks for your help!! I tried these things before, but tried them again in the order you suggested with no success. I'm pretty sure it is not a UVC compliant camera. It's not on Logitech's list of UVC cameras.
M/N: V-UBG35
P/N: 861228-0000
PID: CE6420A
If I try it without the Macam drivers it doesn't show up as a camera is connected at all.
It's so frustrating because it was working great with iChatUSBCam until the recent update. It still works in Skype with no problems, but I'd rather be using iChat if I can - much better video quality.
Thanks for any suggestions!
Matthew

Booklet 3G: right side USB slot stopped working. H...

Similar Messages

Maybe you are looking for