Booklet: clean install Windows 7 Starter on Kingst...

I bought a Kingston SSDNow V+180 SVP180S2/64G 64GB to replace the original HDD.
I had a lot of trouble cloning the drive (or actual the restore operation). Both restoring the Windows partition and the System partition failed.
I decide to start from scratch and just execute a clean install of Windows 7 Starter.
The advantage of this way is you only need a 4 Gb USB Flash Drive and no other hardware (besides the new 1.8 SSD...) This guide is also very useful when the original HDD is broken (and no system restore is available).
Ingredients (where to obtain is explained below):
- 1.8" SSD
- USB Flash Drive (minimum) 4Gb
- Windows 7 key of Booklet
- Windows 7 ISO file (x86 version)
- Windows 7 USB DVD Download Tool
- Nokia Booklet Drivers
The Windows 7 key of the booklet can be found behind the battery. Just remove the battery pack and there is the original Microsoft Windows 7 product key.
As the Nokia Booklet doesn't have a DVD-ROM and it's not supplied with the Windows 7 DVD, you can download the Windows 7 ISO file from here (make sure it’s the x86 version):
http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65804/X15-65804.iso
I got this information from here: http://mrintech.com/download-iso-file-create-dvd-activate-windows-7-x86-and-x64-with-genuine-product...
I also executed the "Remove Edition Configuration (EI.cfg) File from Windows 7 ISO", but wait until proceeding; I will come back to that...
Also download the Windows 7 USB DVD Download Tool from here:
http://images2.store.microsoft.com/prod/clustera/framework/w7udt/1.0/en-us/Windows7-USB-DVD-tool.exe (When the link is broken, just use Google).
Please note: nothing illegal is going on downloading this software!
Install and execute the Windows 7 USB DVD Download Tool.
When asked, select the ISO as source and the USB Flash Drive as target.
The tool formats the USB Flash Drive and the files are copied to it as well.
(I executed this on a Windows 7 machine, but I don't expect differences when executed on a XP machine).
When the tool is ready do the following.
Search on the USB Flash Drive for the file "ei.cfg"
I used the tool to remove this file from the ISO, but it was back on the Flash Drive .
You will have to remove it otherwise Windows 7 Home is installed (result: you can't use the original Booklet key).
How to replace the HDD for the SSD can be found over here:
http://pc-level.com/2011/07/how-to-disassemble-nokia-booklet-3g/
Plug the USB Flash Drive into the Nokia Booklet and power the Booklet up.
Hit the F12 button and select the USB Flash Drive to boot from.
When asked, select Windows 7 Starter to install.
The installation takes a while, but in the end you will see the Windows 7 desktop and are almost ready.
It's very important to disable TRIM and you will see a an excellent performance increase when you execute the following:
Open the command prompt (for example):
Start -> All Programs -> Accessories -> Command Prompt
type:
fsutil behavior set disabledeletenotify 1
To check whether TRIM is disabled execute:
fsutil behavior query disabledeletenotify
The result should be: 1
Reboot the booklet, just to be sure.
Install the drivers from Nokia: http://europe.nokia.com/support/product-support/booklet-3g/software
Execute a Windows Update.
The Windows Experience Index shows me 5.9 with the SSD.

Don't worry Reserter, your English is ok
Concerning your problem two things come to mind:
- did you disable TRIM? It's very important to disable this option because the chipset can't handle TRIM. After I disabled TRIM a serious improvement was noticeable.
- the reason of the clean install initially was because I wanted a SSD (solid state drive) instead of a HDD (hard disk drive). The factory installed HDD is slow and a SSD drive improves performance of the Nokia Booklet dramatically.
I would consider to buy a 1.8" SSD... The booklet starts up in an acceptable time and is really useful as a netbook now. (buy an enclosure for the original HDD and you have external storage as well).

Similar Messages

Some issues after clean installing windows 7 pro 64bit

Hi,
I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine. What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
Can anyone help me? Never had to deal with these issues.
Thanks in advance
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

Hello,
Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI? If so, did that work?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Clean Install Windows 7 on Y470

I am planning to clean install Windows 7 on my Y470 using the Product Recovery Disc. But, I noticed that there are 4 partition on my hard disk, OEM partition, another partition (stated: System, active, primary partition), C drive and D drive. Can I delete all the partition to clean install Windows 7? I particularly confused on the first two partition, OEM partition and another partition (stated: System, active, primary partition).

Don't install Windows 7 on a Yoga 2 Pro... Install Classic Shell instead: www.classicshell.net
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

Clean Install W7 Starter on Mini 210 - Microsoft says Manufacturer is Blocking Install Key

I recently did a clean W7 Starter install on my HP Mini 210-2145DX. I used a Belarc key finder to retrieve the operating system key before doing the clean install with a W7 disc that I own. But the W7 Starter will not verify with Microsoft and gives an error code. I called Microsoft and read them the error code and the W7 Key. The woman asked me to find the certificate of authenticity that is attached to the computer. I told her that there was none. She said the manufacturer was blocking my W7 key. She would not help me any further.
Does anyone know a way around this?
Thanks,
Mike
This question was solved.
View Solution.

Also, I installed W7 Starter version. When I initially tried to install using my W7 Home Premium Disc, the key from the Belarc key finder program did not work, because it said "wrong version" of windows 7. So i had to delete the ei.cfg file from the W7 installation disc and when I did this, and burned a new iso onto a dvd, the installation asked me to select what version I wanted to install. During the install process for W7 Starter, the key that I previously retrieved from my Mini 210 using the Belarc program worked. But Microsoft told me that Microsoft won't verify the operating system as authentic because the manufacture has the key "blocked."

Thinkpad Twist S230u: Clean Install - Windows 8 on Custom Partition

I want to install Windows 8 using my own partition configuration, meaning where I'd get a C and a D drive. On my other computers, this is what I have and I really like this configuration. I want to install Windows 8 on the C drive and have all my data on D. I have reformatted and partitioned the HDD to C and D. When I slot in Windows 8 Enterprise to install, I keep getting this message "We couldn't create a new partition or locate an existing one." What the machine keeps wanting is for me to delete both partitions and create its own partitions and I don't want this. I know it wants this because I have clicked delete of the partitions and looked to see what it would do. It ended up creating several of its own partitions (not at all how I want it). When I re-partitioned the drive back to C and D (2 partition config), it would repeat that same error message.
Can someone please help tell me how do I install Windows 8 doing my own custom partition (C, D) where Win 8 is installed onto my choice of C and D is left for my data. Why does it keep saying, "We couldn't create a new partition or locate an existing one"? Is it a settings in BIOS that I need to change to enable me to use my own partition? If so, what setting? I have never had these issues installing Win 8 using the C & D partition config on 3 other computers (not Lenovo S230u Twist).
Thanks for your help!!! :-)

Hello LightspeedX!
I glad you wrote this issue cause i still having the same problem (and questions).
I decided to put everithing down on my s230u because it is quietly irritant see a last generation porcessor like the I7 on a top plataform ultrabook running so slowly like our thinkpad do.
Since the embed software and the poor resource planning is the resposable for that issue, i really cant imagine why Lenovo decide to bring all this things up together at this device. I realize that any cheap I3 china device is more confortable and "quickly" to run any software than this machine in his original state (factory defaults), so i decid to try a brand new and clean installation of windows 8 or (perhaps) a dual boot configuration using a linux frindly distro like ubuntu.
At my own risc, like the cusummer service like to say, i will erase all HD and start this "saga" (making a full hard copy first, of course and will soon bring any results i found here.
Some interesting urls:
Ubuntu on Yoga Ideapad
http://www.thinkwiki.org/wiki/Installing_Ubuntu_12.10_on_Thinkpad_Twist
http://www.ubuntu.com/certification/make/Lenovo/
http://it.nmu.edu/news-article/lenovo-twist-s230u-screen-orientation-issues
http://nerdanswer.com/answer.php?q=50276
Untill i got there, i wish you lucky because i doubt you can found any anwers from the "big fans" of Lenovo or there oficial costumer services!!!!
Best Regards,
Nilson

Cannot install windows, starting to get really pissed off with this PLEASE HELP

ok, i'm starting to get agitated with this.
i cannot install windows XP, 2003, OR Longhorn on my machine.
right now, i have the following setup:
msi 865pe neo2 motherboard
intel p4 3.2ghz w/HT (factory HS/Fan currently)
1 dimm of PC3200 crucial DDR400
30GB maxtor HD plugged into primary IDE
pioneer dvd/cd drive as sencondary IDE
alps 3.5" floppy drive
antec true blue 480wt PSU
i do the following:
format with maxtor cd
boot from OS cd
start setup, reboot, continue
the farthest i can get is 'registering components/completing installation' i either get a blue screen stop error which isnt the same everytime, or it just locks up and doesnt do anything.
ran the memtest checker and get errors on test #4
i had a DIMM of kingston that gave the same errors, so i RMA'd it and got another. same errors, so i RMA'd again and got a Crucial stick. same errors.
so i RMA'd the motherboard since i figured it had to be that. and it improved from the problems i had earlier. (the problems i had before were worse before.)
below are my BIOS settings. SOMEONE WHO KNOWS PLEASE HELP ME!
advanced bios features:
quick boot - enabled
boot order - floppy, cd, HDD
full logo - disabled
s.m.a.r.t - enabled
num-lock on boot - enabled
floppy swap - disabled
floppy seek - enabled
save rom to HD - no
boot to os/2 - no
hyper threading - disabled
mps revision - 1.4
apic acpi sci irq - disabled
cpu l1 & l2 cache - enabled
bios cacheable - disabled
c000, 32k shadow - disabled
advanced chipset:
dram timing...
configure by spd - enabled
(i dont know what to set timing to, nothing anyone has since said helps)
integrated perfs:
usb controller - enabled (same errors if its disabled too so its not USB)
usb device legacy support - disabled
on chip IDE:
operate mode - legacy mode
ata config - pata only
sata keep enabled - yes (for sata drive i have, error either way)
pata channel selection - both
onboard ethernet, 1394, prmoise ide and audio all DISABLED
pc healt status:
cpu - 49°C/120°F (idle sitting in bios)
system temp - 28°C/82ºF
cpu fan - 2678rpm
nb fan speed - 6490rpm
vcore - 1.456 up to 1.502
3.3v - 3.232v
+5.0v - 5.003v
+12v - 11.680v
-12v - -11.743v
-5.0v - -4.826v
battery - 2.896v
+5V SB - 4.945
freq/voltage control
Dynamic OC - disabled
cpu ratio locked
dram freq - auto
spread spectrum - enabled
cpu bus clock - 200
ddr clock (grayed out) - 400
adjust agp/pci - 66.66/33.33
cpu vcore adjust - no
cpu vcore (grayed out) - 1.5500v
ddr power voltage - 2.65v
agp power voltage - 1.50v
SOMEONE PLEASE HELP ME!!!!!
i'm running out of time, money, patience.
if it cant be solved i'm going to set myself on fire!

Quote
Originally posted by REILLY875
Do NOT try the 250 Watt PSU!!, As "Wonk" said if you happen to Blow it, the PSU will most likely Take out the Mo-Bo with it! And maybe the CPU to, due to the Voltage Spike you would get ...I would not put to much Credence into the fact that as of now the +12V and the +3.3V Rails are reading a little low,(I say this because it is indeed a ANTEC), as this could be the Monitoring Hardware, or the Software that might be reading wrong....If I where you I would First set the Memory Timings Manually to 3-4-4-7-8, And up the DRAM (VDIMM) Voltage to 2.7 Volts, and if it still wont Load, I would Definitly try a different DIMM Slot, and Rince and Repeat .....If you dont mind me asking , Why are you running with just 1 Module?....Is it on purpose or are you saving up for More?................Sean REILLY875
yea, i dont plan to run the 250. im gonna wait for the new 480.
thanks for the info about ram timings as well. i havnt gotten any solid answers about what to set it to.
even with new mobo and ram, i'm getting errors in memtest86 #4 test as i always have. i've tried different slots with same problems.
i only have one module because i dont want to waste anymore money on a non-working system. once i get it up and running i'll add another 512.

G505 How to do a Clean Install Windows 8.1 Core instead of Windows 8.0 Core?

Hi,
I have G505 with Widows 8.0 core installed. I would like to do a clean install of Windows 8.1 core. So I installed but it ask for the activation key which I do not have. I thought we can use the same activation key for Windows 8.1 core. How do you activate it if it is possible.
Or do I have to install Windows 8.0 core and then upgrade to Windows 8.1. Unfortunately I do not have a copy of Windows 8.0 core.
Thanks for any help.

hi magi44ken,
This might be because the WInodws 8.1 installer you used is a retail version and not an OEM from Lenovo.
The path should be Windows 8.0 then upgrade it. this way the Key inside the BIOS will be recognized and reactivated.
Try Doing a Onekey Recovery and see if the Recovery Partition is still active to revert the system back to Windows 8.0. Turn off the computer and hit the Movo button , see if recovery will be available.
If not, you will need to call Lenovo Technical Support to Obtain a copy of the Windows 8.0 install, (fees may apply).
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

15-f010wm unable to clean install Windows 8.1 on Crucial M500 SSD

I have a new 15-f010wm laptop I got from walmart's black friday deal.   I have a 240GB crucial M500 ssd I have already installed.
The problem is Windows 8.1 setup will not see the drive.   Windows 7 sees it just fine.
What I've tried:
- updated firmware on SSD
- upgraded laptop BIOS to latest from f.03 to f.12
- enable "legacy" mode in bios
- enable / disable xHCI support
- tried to load AHCI driver from HP's website (This is the storage driver from the driver page for this laptop)
- format GPT
- format NTFS
- Remove all partitions and volumes with diskpart
- Tried to upgrade windows 7 clean install to Windows 8.1 via DVD. Upon reboot setup fails to see drive, reboots into Winows 7
I simply cannot get Windows 8.1 setup to see this drive no matter what I try.   Again, Windows 7 sees it just fine... in fact, I am creating this thread on the laptop in question with Windows 7 installed on the SSD in question. The hardware is working fine.

@sledparty
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Cheers,
KarolB
I work for HP

Idea pad N580 Clean install windows 8.1 experiment

LOl , My sister has an Idea pad N580 today at 9:00 am I will atempt a clean install of windows pro 8.1 ...
Will report back for those that are interested in clean install for thier Idea pad's N580'S
I have pre burned a dvd with all needed driversfor the conversion

Do U have recovery Drive???? I mean do your PC has came with default Installation with Windows 8.1? Or u have a CD/USB and u want to refresh the whole system????
Regards
WAQAR AHMED KAMBOH
Please click on the KUDOS BUTTON on the left of this post as a sign of THANKS GIVING
Please click on ACCEPT AS SOLUTION if your problem Solved.

Clean install Windows 8.1 Lenovo TPT 2

I have a thinkpad tablet 2 that crashed when updating to 8.0 to 8.1. I don't have a recovery key. I'm attempting to load windows 8.1 enterprise 32bit onto the tablet I've got it loaded on via a bootable USB key. However after booting to windows 8.1 the touch screen does not work and I'm forced to use the keyboard/mouse via a usb hub I've loaded all drivers from the lenovo site also and still many devices show up in device manager as "unknown device"
Can anyone help me with this? Am I doing something wrong or is there a driver that needs to be updated for touch screen functionality? Is there a procedure that can be used to do a stock restore from windows 8.1 enterprise recovery media?

Did you ever get all to work???? We have the same issue you do....Nothing works with a stock Windows 8 or 8.1 install...No WIFI or BT or Touch and a lot other stuff bunked up...The IO drivers crash before they finish install and turn off the back light...The leveno tablet 2 is a frienkistien of off brand hardware I think....But if you could walk us through how you fixed your issue of a clean install we will post it for all to see...With pictures

Clean install windows 8 on Ideapad U310

Hi guys,
I have purchased Ideapad U310 couple of months back with Windows 7 home premium installed. Recently I availed the offer. While trying to make a fresh install of Windows 8 I noticed the C drive is not detected. I could not find any solutions to make a smooth & clean install of Windows 8 and will my laptop work without a glitch. Please advise, I am lost.
Cheers,

In Windows Setup your drives won't be lettered at all. All you get is the partition number (if your laptop is fully stock then the C:\ drive SHOULD be disk 0, part 1) and the size. The drives are mounted as letters within Windows.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

HP Pavilion Sleekbook 15 not booting up from USB (to clean install windows)

Hello there,
I have been trying to install windows 7 ultimate using from USB on my HP Pavilion Sleekbook 15 (Model: b153cl) but unfortunately even after changing the boot order on bios to the USB device it's still not picking up the USB to clean install windwos 7.
Machine came with pre-installed windows 8, and I hate that.
Can someone help me figure out the issue here... cause i have used the same bootable USB (windows 7) on another machine and it worked without any issues.
Thanks
Mike

well.. i was just reading this thread, http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HELP-download/m-p/4240018
and my problem has been solved...
thanks anyway for the prompt response..
Mike
Huffer wrote:
Have you turned off secure boot in the BIOS and enabled legacy boot? If the machine originally came with Windows 8 secure boot is enabled by default and it will block booting from Windows 7 media.

HP Stream 13 tried clean install windows 10. Big Problem

EDIT: I have am HP Stream 13 that came with 8.1 The hard drive ont hese things is not large enough to compleate the upgrade to windows 10. So i preformed a clean install from a USB. Now i have 10 and it is not activated. NOW I read that you MUSST preform the upgrade first in order for windows to detect your hardware and register it as valis for the free windows 10. BUT since upgrade was not posible I have a windows 8.1 key that is useless since there is no service to change the key to a windows 10 key.. This is insane. these laptops are being advertisd with the free upgrade to windows 10 yet are not able to be upgraded. Not sure what to do now. I am running a new HP stream 13 touchscreen with windows 8.1 I want to upgrade to windows 10 before I am back to school (before i have to install all kinds of software and files) Obciously the Stream does not have enough SSD left to preform the upgrade. I have created a clean install USB thumb drive but am worried about using it. From what i have read the recovery partition that is not deleteable houses files that the system accesses. When i do a Clean install wiping the C drive (but not the partition) will everything work? will i loose the use of that partition space forever? and lastly I used a program to access my windows key since it is located in the bios not on a sticker but I want to know if anyone else has done this and did it auto detect? or did they run in to any problems. Sorry if this is all posted somewhere else but i am not finding any information at all. EDIT! I do have a USB recovery that i can use if i must to windows 8.1 I installed 10 from a USB and it is workign fine other than it is now saying my KEY isnt valid for this clean install. How do i convert my 8.1 key to a key that will work for 10? I cant see myself buying a new key from microsoft when the laptop was sold with an advert saying free upgrade to 10. It isnt posible to do a upgrade because of the space required for the upgrade to do its work. this is a real pain.

Hi, 1. You can have this option: create a Recovery media (USB key) then delete the Recovery partition, this will give you more room.2. Not 100% work unless Windows 10 or you can dind all drivers for your computer. Again, to get more space, you can delete Recovery partition but please create a Recovery set/media first.3. I upgraded 5 laptops on weekend inluding 2 HP laptops. I used tool to get the keys by Windows 10 upgrade (not clean install) could detect the keys in BIOS. I still have few more laptops and my children laptops I will upgrade. I won't do clean install because I don't want to spend time to re-install all programs/applications again. Regards.

Re: Cant recover (clean install) Windows 7

Cant recover my Windows 7 64-bit.
The method by pressing '0' doesnt work. It only beeps.
And it doesnt work by doing it from windows. The error says: windows cant restart computer in Windows Recovery Environment. To complete recovery.
now it doesnt work by pressing 'f8'
I do have the windows key.
Any help?

Hello
Can you please offer some basic information about your machine?
Which notebook model do you have exactly?
Do you want to install Windows 7 using HDD recovery option or using Windows installation disc?
If you use Microsoft installation disc please follow these steps:
-start your notebook and enter BIOS settings
-set BIOS to default settings
-after new restart press F12 button to enter boot menu
-put installation disc into optical disc drive
-choose ODD as first bootable device and press ENTER
By the way: have you created recovery media (DVD or USB)?

After clean installing Windows 7, I can't use SYNC to restore old profile. Is it lost? Is it not also stored on firefox server/online?

I installed windows 7 pro.
When i installed Firefox, i was hoping for signing in using my profile email and using SYNC to get saved passwords and bookmarks.
Is it possible?
I've entered my profile login and sync has not retrieved anything from my login details. I thought it was stored online as well???

In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her.

Booklet: clean install Windows 7 Starter on Kingst...

Similar Messages

Maybe you are looking for