Booklet with pages one above the other, not next to each other

I have sheets of paper that is 13cm wide and 20cm tall. It is perforated in the middle.
When I go to File | Booklet in InDesign CS4 I setup a booklet which tries to print 2 pages next to each other but of course these it not enough room.
What I need to do is have the two pages be one above the other to fit on the sheet of paper. But I am unable to find a way to do that.
Any hints?
Thanks!

in the print dialog you can change the parameters
for output in the 'setup' section--see screenshot--width, height, orientation, page position
see this linked page:
http://www.thebookdesigner.com/2009/11/creating-a-pdf-for-lightning-source-in-indesign-par t-3/

Similar Messages

With a wired keyboard and a 2014 iMac I cannot select multiple items which are not next to each other

I have recently changed from Windows 7 desktop to a new iMac running Mavericks. I have chosen a wired keyboard as I like the usual Delete key function.
I cannot find out how to select several items which are not next to each other (e.g. words in Pages). The well known method in Windows, which is repeated in the the Apple Finder Help screen, does not work. Would be grateful for advice

Hi JBowfin,
If I am understanding your question correctly, I believe that I have an article that will address this question for you:
Mac OS X 10.0: Use Command Key to Select Multiple Items in List and Column Views
http://support.apple.com/kb/TA20396
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How can I have two PDFs open at the same time next to each other?

How can I have two PDFs open at the same time next to each other?

Moved to Adobe Reader for iOS.
The only way I know how to do that is with two iPads.

How to select multiple nodes, which are not next to each other, in a tree?

The following code suppose to allow user select any combination of nodes (because of DISCONTIGUOUS_TREE_SELECTION), however, I can only select nodes which are next to each other. Can some one told me how to make this DISCONTIGUOUS_TREE_SELECTION work?
Thank you very much!
import javax.swing.*;
import javax.swing.tree.*;
public class TestTree extends JFrame {
public TestTree() {
super();
setBounds(0,0,500,500);
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JTree tree = new JTree();
getContentPane().add(tree);
TreeSelectionModel model = new DefaultTreeSelectionModel();
model.setSelectionMode(TreeSelectionModel.DISCONTIGUOUS_TREE_SELECTION);
tree.setSelectionModel(model);
public static void main(String [] args) {
TestTree test = new TestTree();
test.show();

In Windows you hold down the Ctrl key while clicking on the nodes you want to select. Don't know the equivalent in other environments.

2+ movies but the will not play into each other on DVD

I am making a wedding video. I want to break it up into intro, ceremony, reception, interviews etc. I made a seperate video for each of them in hopes that each one can be watched on DVD seperately or ALL in a row. I drag Intro, ceremony, reception, interviews into IDVD so there are 4 videos in a row. The DVD will play ONLY ONE at a time. I want the option that if they start with intro that it will just play into the other 3 videos below it...
PLEASE HELP!

Hello eporon,
the only possibility to create a DVD with several movies and have the option to either play the parts separatly or "play all" as in commercial DVDs is to duplicate your movie(s).
This means you have to import the individual movies (as you already did), then create a new movie where you join the parts into one. Now import that movie as well and name the menu button "play all".
Important: this can only work if the combined parts are less than 60 min long (DVD-R is max 120 min).
Alternatively you could create a single movie out of the four parts and place chapter markers for each individual title (ceremony, reception...) the let iDVD create a chapter submenu. Now the separate titles can be accessed from there.
hope this helps
mish

The tools on Adobe Photoshop Elements 9 seemed to have frozen. The crop symbol is 3 of the symbols nest to each other. The hand move tool is not one hand but 3 next to each other. Other tools won't work at all. Really nice!

Ya, okay ! I use a number of PSE programs, one of which is PSE 9. The tools for some reason seem to have frozen. When I use the move tool I don't get just one hand but 3 hand symbols all next to each other. Same thing with the crop tool, I don't get one symbol but 3 all next to each other. There are a couple of tools that just don't work at all. It's like the PSE 9 got hit with some virus or sorts. Oh well, live and learn. Trying to get through to tech service is next to impossible.

Have you seen this other thread you started about this problem?
Photoshop Elements 9 is messed up.
Did you use Barbara's fix?
It would be less confusing if you only posted this question once, not three times:
HOW DO I RESET ALL THE TOOLS IN PSE 9 ? THE CURSOR IS REALLY MESSED UP AND DOES NOT WORK WITH THE TOOLS. I TOUCH THE HAND AND I GET 3 HANDS, I TRY TO USE THE CROP AND I GET 3 SMALL CIRCLES. THE CURSOR IS REALLY MESSED UP. DO I HAVE TO GET ANOTHER PSE 9 ?
Photoshop Elements 9 is messed up.
The tools on Adobe Photoshop Elements 9 seemed to have frozen. The crop symbol is 3 of the symbols nest to each other. The hand move tool is not one hand but 3 next to each other. Other tools won't work at all. Really nice!

How to show masterdata in colums next to each other?

Hey guys!
I'm working on a query where we're using a characteristic and several key figures. This characteristic is a masterdata object which shows various user roles belonging to a project.
What I would like to see in my report is the project name plus the user roles (multiple roles per project!) in the colums, followed by the key figures. Each 'rolecolumn' then shows the name of the user.
BUT!
I would like to see the roles (masterdata) next to each other, each in a separate column followed by the key figures.
Standard SAP shows a role in a colum, then all key figures, then another role, then all key figures again etc.
Any advice on how to solve this?
Regards,
Joost
Edited by: Joost on Jun 2, 2008 12:09 PM
Edited by: Joost on Jun 2, 2008 12:10 PM

Hey Balaji,
Thanks for your reply. Unfortunately, your solution of drilling down to other reports is not allowed at the customer. Should you have any other solutions, let me know.
Regards,
Joost

TS4124 What causes iTunes Match, on an iOS device, to lose the cloud icon next to each song?

What causes iTunes Match, on an iOS device, to lose the cloud icon next to each song. On my iPad 2 and iPhone 4S one cloud shows up for a whole album to tap and download a whole album but the ones next to the songs are no longer there. No songs will delete from my phone once downloaded from the cloud by sliding my finger to the left over the song and tapping delete. Instead it just plays the song when I try to delete it. To delete my music from my device I have to go in to settings and delete all the music. This worked fine for the first week and then one day the cloud status next to each undownloaded song disappeared and started doing this.

Try sync Music from iTune to your iPad again.

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

Hi...
Mac OS X keyboard shortcuts
Control-F4
Move focus to the active (or next) window
Shift-Control-F4
Move focus to the previously active window
By the way... since you are new to Mac, click a clear space on your Desktop. You should see "Finder" top left corner of the screen in the menu bar.
Click Help then click Help Center
As an example type in keyboard shortcuts
You can use the Help menu for almost any application on your Mac.
Apple - Find Out How - Mac Basics
For held switching from PC to Mac > Apple - Support - Switch 101

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Placing double pages one below the other

Does anyone know if it is possible to place double pages one below the other instead of side by side? If it is, please be so kind and describe how it´s done. If not let me know for it´s a very relevant question for me concerning workflow.
Thanx

>How did you do your annual calendar before you worked in InDesign?
We did our first one in Freehand, which allows you to arrange the pages any way you want, which is where I got the idea that ID should. The only reason we switched from Freehand to ID for our calendars was because it was easier to work with the text ... and then Freehand got bought out by ID and dropped. (And no I'm not saying that Freehand was the best application for this type of project--only that it had the ability to do vertical spreads.) The thing is, the option exists in Freehand, Adobe now has Freehand, so it seems like they could look at how Freehand did it and see if it could be implemented in ID--and maybe they have. If we don't keep asking, then they won't, right? All we're doing is asking.
We currently do the layout on one page the size of the calendar spread and break it up using PDFs placed on ID pages. That works for calendars (even if it is time consuming), however, I've done several books that were not calendars that use a horizontal binding and needed page numbers on the top and bottoms of the spread, and I had implement all kinds of masters to do what is automatic on the horizontal spreads. It doesn't make sense to me that an application that is designed for book layout can't do both kinds of spreads.
But I repeat what I said before in my first post. I think rotating views would solve that problem (along with others) quite nicely. You could then rotate all your text boxes and work like you were on a vertical spread and still have all the features of a horizontal one.
>I always get my fists up when I read people saying "Why can't InDesign do this?". It always feels as if they are saying "Why can't ID do this? It was so easy to do in Quark, PageMaker, FrameMaker, or even Word!"
No need to get your fists up. I love ID. I've been using it since version 1.0 when everyone else was still laughing at it. (I dropped PageMaker gratefully and without looking back). I wouldn't use anything else (including Freehand). But to say ID doesn't have room for improvement is to say it is perfect and it isn't. Why does it bother you so when other designers have features that are so intrinsic to their workflow that they just can't understand why everyone else isn't upset it isn't in ID? I admire your skill with ID and your ability to help everyone, but I really wish you wouldn't be so quick to jump down people's throats when they miss features that would make their lives much easier. Maybe you don't understand their frustration, but that doesn't make them wrong. When I first had to do a vertical spread, I was really flabbergasted that I couldn't switch the spreads around, I missed the feature because I needed it. Isn't that enough for you?

I had to replace my i4s with another one from the apple store.shouldn't i be able to go to the cloud to get all my contact info and other stuff that was stored in the cloud from the first phone?

i had to replace my i4s phone with another one from the apple store. i need to download all my contact info and other stuff from the cloud to my new phone.i see a screen that says RESTORE I PHONE and are you sure you want to restore the iphone to its facory settings? all of your media and other data will be erased. they i tunes will verify restore with apple. After this you will have the option to restore your contacts and other settins. The question is will it restore my first phones info? I am hesitant to delete anything lol.

No. If you made your backup to iCloud, iTunes will not restore from an iCloud backup. See:
iOS: Backing Up and Restoring Data to a New Device

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do.

Two Photos in Book above each other, not next to

Hi there,
the "Layout" feature allows only to present two photos on a page next to each other, but not one above the other (if they are more "panorama"-kind-of-photos).
Is there any possibiliy to change that?
Thanks for any hints!

All that's offered is what's in the layout menu.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How can i remove the page title above the File,Edit,View,History,Bookmark tab?

how can i remove the page title above the File,Edit,View,History,Bookmark tab in firefox

In Firefox 29 and Firefox 30:
"3-bar" menu button > Customize
In the lower left, click the Title Bar button to switch the title on and off.
In Firefox 28, I actually can't remember!
I would be remiss if I didn't remind you:
* Firefox 28 is not secure: Mozilla has disclosed its [https://www.mozilla.org/security/known-vulnerabilities/firefox.html known security flaws].
* You can modify Firefox 30 to restore many of the UI features of earlier versions of Firefox using the techniques in the following article (and/or with assistance from forum volunteers): [[How to make the new Firefox look like the old Firefox]].

Booklet with pages one above the other, not next to each other

Similar Messages

Maybe you are looking for