Bookmark bar and menu stop working after awhile on Firefox 12

I have upgraded to Firefox 12. Everything works fine when I start up Firefox, but after some amount of use (and I can't always reproduce this) eventually when I click on bookmarks in my Bookmark Bar or from the Bookmark menu, nothing happens. Firefox doesn't load the bookmark. If I open the "Show All Bookmarks" window and click on bookmarks there, they load fine and then the menu and bookmark bar suddenly start working again. If I close the "Show All Bookmarks" window the Bookmark Bar and menu stop working again.

Hi ischou,
I haven't heard of this particular issue, but you might want to try starting Firefox in [[Safe Mode]]. Let is sit for a while as you described above and if you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
Hopefully this helps!

Similar Messages

  • 5.1.3 Restoring bookmarks bar and menu ?

    I'm running Safari 5.1.3 on imac on 10.7.3
    I just synced my ipad to computer.
    On my bookmarks bar on the ipad I had only 2 bookmarks. On the computer I had a whole bunch. Same with bookmarks menu.
    After the sync, on my computer, it had deleted all the bookmarks on my bookmarks bar, and only left me the 2 that were on the ipad. Same with bookmarks menu.
    Seems to have affected bookmarks bar and menu only. Rest of bookmarks are OK.
    I have an external backup drive and backed up a week ago. But, have never had to restore anything.
    What's the procedure to restore the bookmarks bar and menu in Safari, using time machine?
    Thanks.

    The only way is to restore from a useful backup, if you have one.
    If you sync the iPad to iTunes and use Time Machine regularly, you would likely have the appropriate backup to restore from. In that case:
    Restore the iPad backup set from Time Machine from a date before you overwrote the bookmarks. The location of the backup is ~/Library/Application Support/MobileSync/Backup/ (you can get to it by pressing Cmd+Shift+G in the Finder and entering this path).
    Connect the iPad, run iTunes and restore from the backup.
    If you use iCloud Backup, then you can restore from iCloud and choose which date's backup you'd like to restore from. You can check if you're using iCloud Backup by opening the Settings app on the iPad, then going to the iCloud submenu and looking at the status right below "Storage & Backup", where it would say "iCloud Backup is off." (or "iCloud Backup is on.", as the case may be).
    In any case, keep in mind that restoring from a backup means you lose all application data changes after the date of the backup.
    Also see Restoring from a previous iCloud backup.

  • Repetition in Bookmarks Bar and Menu Sidebar, shifting in MenuBar,

    I am seeing deleted bookmarks return as well as it seems a neverending growth and repetetion of my bookmarks since 5.1.2 update and numerous repeats in the bookmarks bar and menu. See attached screenshot. Yes, I used MobileMe and have been using iCloud since so I suspect it is related.
    Thanks for any thoughts

    Actually, it just keeps growing. Even more repetition today. I have emptied cache, reset Safari, replaced the bookmark.plist file with an older Time Machine backup and within minures it starts repopulating and starts all over again growing in duplications. This has to be iCloud related in my opinion. If not, where is it coming from.
    It seems various threads with different descriptions of the same problem or a variant of bookmarks and menubar issue are being addressed in this Safari forum, and most just started seeing this it seems in the last several weeks but not before the 5.1.2 update.
    Does anyone else think so? This appears to need Apple Support attention at an advanced level, as all the suggestions, while great to have and try, they are not working. I'll bet this issue is very widespread, just not observed or reported yet.

  • Windows 7 professional backup and restore stop working after installation of acronis true image 2010

    HI,
    windows 7 professional backup and restore stop working after installation of acronis true image 2010. it generates a error code 0x81000019. please help.
    thanks
    Song

    Sankalp,
    I too have the error 0x81000033 when running the full system image backup.  I could not assign a drive letter to my 100mb drive with the Disk Management.  So, I went into the diskpart and ran the following commands:
    diskpart
    list disk
    DISKPART> list par
      Partition ###  Type              Size     Offset
      Partition 1    System             100 MB  1024 KB           ( 78.2 of 96.0MB free )
      Partition 2    Reserved           128 MB   101 MB
      Partition 3    Primary             73 GB   229 MB
      Partition 4    Recovery           423 MB    74 GB
    sel dis 0
    list par
    select partition 1
    assign letter=q
    fsutil usn queryjournal q:
    fsutil usn deletejournal /D q:
    After diskpart, I opened the "My Computer" and see that I have 78.2 of 96.0MB free.  Despite that, I ran these commands on the new q: drive:
    C:\Windows\System32>q:
    Q:\>fsutil usn queryjournal q:
    Error:  The parameter is incorrect.
    The FSUTIL utility requires a local NTFS volume.
    Q:\>fsutil usn deletejournal /D q:
    Error:  The parameter is incorrect.
    The FSUTIL utility requires a local NTFS volume.
    Q:\>
    Any help is appreciated.

  • Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

    windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
    the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
    anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

    The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
    VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
    Test media player at www.vdat.com/techsupport/windowstest.asp

  • Mouse and Keyboard stops working after a while

    Hi, I'm not even sure where to start to find the cause of the problem. I have a normal ps/2 keyboard and USB optical mouse, both of them just stops working after a few hours. The light on the mouse just dies and the keyboard is not responsive at all.  I have to do a hard reboot of my computer. How and where can I diagnose the problem? I noticed the problem started when I upgraded to the latest kernel.

    And then after a while it will just use a new address:
    Oct 31 01:47:15 wdesktop usb 1-1: USB disconnect, address 6
    Oct 31 01:47:15 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 7
    Oct 31 01:47:16 wdesktop usb 1-1: configuration #1 chosen from 1 choice
    Oct 31 01:47:16 wdesktop input: Microsoft Microsoft Wheel Mouse Optical as /class/input/input8
    Oct 31 01:47:16 wdesktop input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical] on usb-0000:00:10.0-1
    Then after that my mouse is unusable, the following is shown:
    Oct 31 01:48:41 wdesktop usb 1-1: USB disconnect, address 7
    Oct 31 01:48:41 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 8
    Oct 31 01:49:13 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 9
    Oct 31 01:49:45 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 10
    Oct 31 01:49:56 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 11
    Oct 31 01:50:08 wdesktop uhci_hcd 0000:00:10.0: Controller not stopped yet!
    Unplugging and plugging the mouse back does not work
    I found a workaround for that by unplugging the mouse, removing the uhci_hcd and adding it back, so:
    sudo rmmod uhci_hcd
    sudo modprobe uhci-hcd
    But I'm still not sure what causes the problem.
    Last edited by willy (2008-10-30 15:02:54)

  • Toupad Tapping and Scrolling stopped working after Windows 10 Upgrade

    Hi, I upgraded my OC to Windows 10 today, after the upgrade tapping and scrolling stopped working on the synaptics touchpad. the toucpad only finctions as a pointer now. for taps/Clicks i always have to use the buttons below the touchpad. It was working fine before the upgrade, the earlier OS was Windows 7 I have checked for driver updates but i get a message that the drvier is up to date.I have check the device setting and confirmed that tapping and scrolling is enabled.I have also done a device reset. Nothing solved the problem, i also did not find a relevant answer on the forums.Also, the same problem did not happen with my other HP laptop (Notebook PC) which was also upgraded to windows 10 recently. Does anyone have a solution? Regards,Siddharth. 

    , Hello and thanks for posting on the HP support forums.  What you will need to do is the run the Windows Update Fixer tool.  Here is a link to help you with that.  Make sure you run all updates including optional. Fix Microsoft Windows Update Issues If that fails to work the only other option is to roll your system back to the original supported operating system that came with your notebook. Thanks again for the post and have a great day.

  • Mouse and Keyboard stop working after reboot

    So far the computer is working great except for the fact everytime you reboot the keyboard and mouse stop working... I did a clean format x2 and put the service pack on and I am still getting the same problem.
    Anyone have this problem or something similair ? Any ideas ?
    Thanks in advance :-)

    The problem is not your S/W install. It's with the MSI Motherboard. Your best bet is to ask MSI when a fix will be available, or go buy a different board.

  • ADF: Page navigation and buttons stop working after a while

    Hi all,
    We have a web app built with ADF Faces/JDev 10.1.3 that runs in OC4J 10.1.2.0.2. Sometimes we encounter this problem in our JSF pages: after a while (can't relate to some particular action), all navigation in a page (links, tabs, buttons, etc) just stops working, i.e. you can click them, the server receives some request (we see this in the logs), but the desired action never happens. It's just like the page keeps refreshing all the time. There is no navigation out of the page at this point, it's completely stuck.
    If, at the same time, we connect to the app from a different browser, it will work fine, but the first browser will remain in the faulty state.
    I turned the enableTokenValidation in the pages on and off, but it seems to make no difference. Can anyone provide an idea about what might be going on?
    Thanks,
    Serban

    Hello,
    Any answer on this issue? It seems that ADF is pretty unstable if user clicks repetedly on the same submit button (like a double-click) or on different tabs on the old page, until the next page loads. We are using .jspx pages and combined with SSL access this behaviour is behaving even worser.
    Basically we encounter the following problems:
    1) It seems that users with not so good network access (and accessing ADF app on a SSL OC4J) still have access to the origin page until the target page loads on a submit. If they click a different button or tab on the origin page in this interval (waiting for their previous action to complete), they usually get a JavaScript error that will block the interface until they do a manual refresh (F5)...
    This can be reproduced even on client machines with good network access if you click very fast on the same button twice or on two different submit buttons.
    2) It seems that sometimes the browser keeps showing the loading bar in the status bar even if the new .jspx page is already loaded. Any advice on how to solve this, as the users might be tempted to push application buttons or browser navigation thinking that the page is blocked?
    All the above happen on IE 6, which is the preffered browser.
    Thanks! I can give you more details if needed.

  • Headphones stop working after awhile.

    I have a 2009 Macbook.  The headphones will work for awhile then just stop working.  After I reboot they work again for a short period then stop working again.  I have  tried several different headphones and they all do the same thing.  Help.

    Thank you for your reply.  Do I use one of those bottled air cans to blow out any dirt?  Also I have used two different sets of earphones, one (Sony) has 2 rings and the other (Apple) has 3 rings.  Thank you again for your advice.

  • [solved] Touchpad scrolling and tapping stops working after Xorg 1.9

    Hi all,
    My laptop is an Acer Extensa 5630EZ and it has been running for over a year with Arch without problems. However, since the xorg 1.9 upgrade the touchpad edge scrolling just randomly stops working. Everything else continues working fine. I have searched the forums and Googled but haven't found anything that fixes it. Logging out and back into KDE gets the scrolling working again (X restart I guess). I'm pretty much stumped for ideas. Please help!
    [edit]
    - I edited the title for a more accurate description
    - I noticed that tapping also stops working
    - Note that it initially works but then randomly stops... as opposed to others' where it does not work at all.
    /etc/X11/xorg.conf.d/10-synaptics.conf
    $ cat /etc/X11/xorg.conf.d/10-synaptics.conf
    Section "InputClass"
    Identifier "touchpad catchall"
    Driver "synaptics"
    MatchIsTouchpad "on"
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3"
    Option "VertEdgeScroll" "on"
    Option "VertTwoFingerScroll" "on"
    Option "CornerCoasting" "1"
    Option "RBCornerButton" "3"
    Option "LTCornerButton" "2"
    Option "CoastingSpeed" "0.5"
    Option "CoastingFriction" "0"
    Option "EmulateTwoFingerMinZ" "40"
    Option "EmulateTwoFingerMinW" "5"
    EndSection
    /etc/X11/xorg.conf.d/10-evdev.conf
    $ cat /etc/X11/xorg.conf.d/10-evdev.conf
    # Catch-all evdev loader for udev-based systems
    # We don't simply match on any device since that also adds accelerometers
    # and other devices that we don't really want to use. The list below
    # matches everything but joysticks.
    Section "InputClass"
    Identifier "evdev pointer catchall"
    MatchIsPointer "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev keyboard catchall"
    MatchIsKeyboard "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchpad catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev tablet catchall"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev touchscreen catchall"
    MatchIsTouchscreen "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    touchpad part of X log
    [ 36091.108] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event5)
    [ 36091.108] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
    [ 36091.108] (**) PS/2 Mouse: always reports core events
    [ 36091.108] (**) PS/2 Mouse: Device: "/dev/input/event5"
    [ 36091.120] (--) PS/2 Mouse: Found 3 mouse buttons
    [ 36091.120] (--) PS/2 Mouse: Found relative axes
    [ 36091.120] (--) PS/2 Mouse: Found x and y relative axes
    [ 36091.120] (II) PS/2 Mouse: Configuring as mouse
    [ 36091.120] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
    [ 36091.120] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 36091.120] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
    [ 36091.120] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
    [ 36091.120] (**) PS/2 Mouse: (accel) acceleration profile 0
    [ 36091.120] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
    [ 36091.120] (**) PS/2 Mouse: (accel) acceleration threshold: 4
    [ 36091.120] (II) PS/2 Mouse: initialized for relative axes.
    [ 36091.121] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
    [ 36091.121] (II) No input driver/identifier specified (ignoring)
    [ 36091.121] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
    [ 36091.121] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
    [ 36091.121] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
    [ 36091.121] (II) LoadModule: "synaptics"
    [ 36091.122] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 36091.130] (II) Module synaptics: vendor="X.Org Foundation"
    [ 36091.130] compiled for 1.9.0, module version = 1.3.0
    [ 36091.130] Module class: X.Org XInput Driver
    [ 36091.130] ABI class: X.Org XInput driver, version 11.0
    [ 36091.130] (II) Synaptics touchpad driver version 1.3.0
    [ 36091.130] (**) Option "Device" "/dev/input/event6"
    [ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
    [ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
    [ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
    [ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
    [ 36091.249] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
    [ 36091.249] (**) Option "EmulateTwoFingerMinZ" "40"
    [ 36091.249] (**) Option "EmulateTwoFingerMinW" "5"
    [ 36091.249] (**) Option "VertEdgeScroll" "on"
    [ 36091.249] (**) Option "CornerCoasting" "1"
    [ 36091.250] (**) Option "VertTwoFingerScroll" "on"
    [ 36091.250] (**) Option "RBCornerButton" "3"
    [ 36091.250] (**) Option "LTCornerButton" "2"
    [ 36091.250] (**) Option "TapButton1" "1"
    [ 36091.250] (**) Option "TapButton2" "2"
    [ 36091.250] (**) Option "TapButton3" "3"
    [ 36091.250] (**) Option "CoastingSpeed" "0.5"
    [ 36091.250] (**) Option "CoastingFriction" "0"
    [ 36091.349] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 36091.349] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 36091.416] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
    [ 36091.416] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
    [ 36091.459] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 36091.460] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
    [ 36091.460] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
    [ 36091.460] (II) Synaptics touchpad driver version 1.3.0
    [ 36091.856] (EE) AlpsPS/2 ALPS GlidePoint no synaptics event device found
    [ 36091.905] (**) Option "Device" "/dev/input/mouse1"
    [ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid x-axis range. defaulting to 1615 - 5685
    [ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid y-axis range. defaulting to 1729 - 4171
    [ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid pressure range. defaulting to 0 - 256
    [ 36091.916] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
    [ 36091.916] (**) Option "EmulateTwoFingerMinZ" "40"
    [ 36091.916] (**) Option "EmulateTwoFingerMinW" "5"
    [ 36091.916] (**) Option "VertEdgeScroll" "on"
    [ 36091.916] (**) Option "CornerCoasting" "1"
    [ 36091.916] (**) Option "VertTwoFingerScroll" "on"
    [ 36091.916] (**) Option "RBCornerButton" "3"
    [ 36091.916] (**) Option "LTCornerButton" "2"
    [ 36091.916] (**) Option "TapButton1" "1"
    [ 36091.916] (**) Option "TapButton2" "2"
    [ 36091.916] (**) Option "TapButton3" "3"
    [ 36091.916] (**) Option "CoastingSpeed" "0.5"
    [ 36091.916] (**) Option "CoastingFriction" "0"
    [ 36091.937] (EE) Query no Synaptics: 6003C8
    [ 36091.937] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
    [ 36091.937] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
    [ 36091.979] (EE) PreInit failed for input device "AlpsPS/2 ALPS GlidePoint"
    [ 36091.979] (II) UnloadModule: "synaptics"
    [ 36101.679] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 36101.679] (II) intel(0): Printing DDC gathered Modelines:
    [ 36101.679] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 36113.812] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 36113.813] (II) intel(0): Printing DDC gathered Modelines:
    [ 36113.813] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    Last edited by drsjlazar (2010-10-13 14:46:44)

    I know about Google's Linux search but I hardly use it... I just add Linux to my search terms. Thanks for the reminder though.
    My laptop is an Acer Extensa 5630EZ with an ALPS 'GlidePoint' touchpad.
    Searching for problems that seem related to mine does not bring up much. Xorg 1.9 being new is probably the reason. I have gone through the updated installation guide and tried to get everything in order. Some pages recommend HAL, Xorg does not. But without HAL, I have no suspend/hibernate option in KDE and VMWare will not work. The problem appears even if I run DBus only without HAL. So I've decided to to just run HAL.
    I have removed all the extra stuff I don't need at startup. Most notable is syndaemon in bashrc (totally forgot I had that). I have to wait for it to stop working since it is unpredictable. Though, I have noticed that it seems to stop working when I use keyboard shortcuts/combinations.
    Here is my entire Xorg log after it stopped working:
    [ 45238.439]
    X.Org X Server 1.9.0
    Release Date: 2010-08-20
    [ 45238.439] X Protocol Version 11, Revision 0
    [ 45238.439] Build Operating System: Linux 2.6.34-ARCH x86_64
    [ 45238.439] Current Operating System: Linux extensa-arch 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 08:45:18 CEST 2010 x86_64
    [ 45238.439] Kernel command line: root=/dev/mapper/AllPartitions-ArchRoot ro quiet splash
    [ 45238.439] Build Date: 24 August 2010 01:44:37PM
    [ 45238.439]
    [ 45238.439] Current version of pixman: 0.18.4
    [ 45238.439] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 45238.439] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 45238.439] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 7 11:41:07 2010
    [ 45238.439] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 45238.439] (==) No Layout section. Using the first Screen section.
    [ 45238.439] (==) No screen section available. Using defaults.
    [ 45238.439] (**) |-->Screen "Default Screen Section" (0)
    [ 45238.439] (**) | |-->Monitor "<default monitor>"
    [ 45238.440] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 45238.440] (==) Automatically adding devices
    [ 45238.440] (==) Automatically enabling devices
    [ 45238.440] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 45238.440] Entry deleted from font path.
    [ 45238.440] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 45238.440] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 45238.440] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 45238.440] (II) Loader magic: 0x7d4880
    [ 45238.440] (II) Module ABI versions:
    [ 45238.440] X.Org ANSI C Emulation: 0.4
    [ 45238.440] X.Org Video Driver: 8.0
    [ 45238.440] X.Org XInput driver : 11.0
    [ 45238.440] X.Org Server Extension : 4.0
    [ 45238.441] (--) PCI:*(0:0:2:0) 8086:2a42:1025:013c rev 9, Mem @ 0xf4000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
    [ 45238.441] (--) PCI: (0:0:2:1) 8086:2a43:1025:013c rev 9, Mem @ 0xf4400000/1048576
    [ 45238.441] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 45238.441] (II) LoadModule: "extmod"
    [ 45238.441] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 45238.441] (II) Module extmod: vendor="X.Org Foundation"
    [ 45238.441] compiled for 1.9.0, module version = 1.0.0
    [ 45238.441] Module class: X.Org Server Extension
    [ 45238.441] ABI class: X.Org Server Extension, version 4.0
    [ 45238.441] (II) Loading extension MIT-SCREEN-SAVER
    [ 45238.441] (II) Loading extension XFree86-VidModeExtension
    [ 45238.441] (II) Loading extension XFree86-DGA
    [ 45238.441] (II) Loading extension DPMS
    [ 45238.441] (II) Loading extension XVideo
    [ 45238.441] (II) Loading extension XVideo-MotionCompensation
    [ 45238.441] (II) Loading extension X-Resource
    [ 45238.441] (II) LoadModule: "dbe"
    [ 45238.441] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 45238.441] (II) Module dbe: vendor="X.Org Foundation"
    [ 45238.441] compiled for 1.9.0, module version = 1.0.0
    [ 45238.442] Module class: X.Org Server Extension
    [ 45238.442] ABI class: X.Org Server Extension, version 4.0
    [ 45238.442] (II) Loading extension DOUBLE-BUFFER
    [ 45238.442] (II) LoadModule: "glx"
    [ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 45238.442] (II) Module glx: vendor="X.Org Foundation"
    [ 45238.442] compiled for 1.9.0, module version = 1.0.0
    [ 45238.442] ABI class: X.Org Server Extension, version 4.0
    [ 45238.442] (==) AIGLX enabled
    [ 45238.442] (II) Loading extension GLX
    [ 45238.442] (II) LoadModule: "record"
    [ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 45238.442] (II) Module record: vendor="X.Org Foundation"
    [ 45238.442] compiled for 1.9.0, module version = 1.13.0
    [ 45238.442] Module class: X.Org Server Extension
    [ 45238.442] ABI class: X.Org Server Extension, version 4.0
    [ 45238.442] (II) Loading extension RECORD
    [ 45238.442] (II) LoadModule: "dri"
    [ 45238.442] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 45238.443] (II) Module dri: vendor="X.Org Foundation"
    [ 45238.443] compiled for 1.9.0, module version = 1.0.0
    [ 45238.443] ABI class: X.Org Server Extension, version 4.0
    [ 45238.443] (II) Loading extension XFree86-DRI
    [ 45238.443] (II) LoadModule: "dri2"
    [ 45238.443] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 45238.443] (II) Module dri2: vendor="X.Org Foundation"
    [ 45238.443] compiled for 1.9.0, module version = 1.2.0
    [ 45238.443] ABI class: X.Org Server Extension, version 4.0
    [ 45238.443] (II) Loading extension DRI2
    [ 45238.443] (==) Matched intel as autoconfigured driver 0
    [ 45238.443] (==) Matched vesa as autoconfigured driver 1
    [ 45238.443] (==) Matched fbdev as autoconfigured driver 2
    [ 45238.443] (==) Assigned the driver to the xf86ConfigLayout
    [ 45238.443] (II) LoadModule: "intel"
    [ 45238.443] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 45238.443] (II) Module intel: vendor="X.Org Foundation"
    [ 45238.443] compiled for 1.9.0, module version = 2.12.0
    [ 45238.443] Module class: X.Org Video Driver
    [ 45238.443] ABI class: X.Org Video Driver, version 8.0
    [ 45238.443] (II) LoadModule: "vesa"
    [ 45238.443] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 45238.444] (II) Module vesa: vendor="X.Org Foundation"
    [ 45238.444] compiled for 1.9.0, module version = 2.3.0
    [ 45238.444] Module class: X.Org Video Driver
    [ 45238.444] ABI class: X.Org Video Driver, version 8.0
    [ 45238.444] (II) LoadModule: "fbdev"
    [ 45238.444] (WW) Warning, couldn't open module fbdev
    [ 45238.444] (II) UnloadModule: "fbdev"
    [ 45238.444] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 45238.444] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    [ 45238.444] (II) VESA: driver for VESA chipsets: vesa
    [ 45238.444] (++) using VT number 7
    [ 45238.448] (WW) Falling back to old probe method for vesa
    [ 45238.450] drmOpenDevice: node name is /dev/dri/card0
    [ 45238.450] drmOpenDevice: open result is 8, (OK)
    [ 45238.450] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 45238.450] drmOpenDevice: node name is /dev/dri/card0
    [ 45238.450] drmOpenDevice: open result is 8, (OK)
    [ 45238.450] drmOpenByBusid: drmOpenMinor returns 8
    [ 45238.450] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 45238.450] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 45238.450] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 45238.451] (==) intel(0): RGB weight 888
    [ 45238.451] (==) intel(0): Default visual is TrueColor
    [ 45238.451] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
    [ 45238.451] (--) intel(0): Chipset: "GM45"
    [ 45238.451] (==) intel(0): video overlay key set to 0x101fe
    [ 45238.472] (II) intel(0): Output VGA1 has no monitor section
    [ 45238.578] (II) intel(0): Output LVDS1 has no monitor section
    [ 45238.578] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 45238.581] (II) intel(0): Output DP1 has no monitor section
    [ 45238.599] (II) intel(0): EDID for output VGA1
    [ 45238.705] (II) intel(0): EDID for output LVDS1
    [ 45238.705] (II) intel(0): Manufacturer: LGD Model: 1f6 Serial#: 0
    [ 45238.705] (II) intel(0): Year: 2009 Week: 0
    [ 45238.705] (II) intel(0): EDID Version: 1.3
    [ 45238.705] (II) intel(0): Digital Display Input
    [ 45238.705] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    [ 45238.705] (II) intel(0): Gamma: 2.20
    [ 45238.705] (II) intel(0): No DPMS capabilities specified
    [ 45238.705] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 45238.705] (II) intel(0): First detailed timing is preferred mode
    [ 45238.705] (II) intel(0): redX: 0.603 redY: 0.349 greenX: 0.325 greenY: 0.553
    [ 45238.705] (II) intel(0): blueX: 0.157 blueY: 0.144 whiteX: 0.313 whiteY: 0.329
    [ 45238.705] (II) intel(0): Manufacturer's mask: 0
    [ 45238.705] (II) intel(0): Supported detailed timing:
    [ 45238.705] (II) intel(0): clock: 71.0 MHz Image Size: 331 x 207 mm
    [ 45238.705] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
    [ 45238.705] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
    [ 45238.705] (II) intel(0): LG Display
    [ 45238.705] (II) intel(0): LP154WX4-TLB5
    [ 45238.705] (II) intel(0): EDID (in hex):
    [ 45238.706] (II) intel(0): 00ffffffffffff0030e4f60100000000
    [ 45238.706] (II) intel(0): 00130103802115780a56759a59538d28
    [ 45238.706] (II) intel(0): 24505400000001010101010101010101
    [ 45238.706] (II) intel(0): 010101010101bc1b00a0502017303020
    [ 45238.706] (II) intel(0): 36004bcf100000190000000000000000
    [ 45238.706] (II) intel(0): 00000000000000000000000000fe004c
    [ 45238.706] (II) intel(0): 4720446973706c61790a2020000000fe
    [ 45238.706] (II) intel(0): 004c503135345758342d544c423500eb
    [ 45238.706] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 45238.706] (II) intel(0): Printing probed modes for output LVDS1
    [ 45238.706] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 45238.706] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 45238.706] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 45238.706] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 45238.706] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 45238.707] (II) intel(0): EDID for output DP1
    [ 45238.707] (II) intel(0): Output VGA1 disconnected
    [ 45238.707] (II) intel(0): Output LVDS1 connected
    [ 45238.707] (II) intel(0): Output DP1 disconnected
    [ 45238.707] (II) intel(0): Using exact sizes for initial modes
    [ 45238.707] (II) intel(0): Output LVDS1 using initial mode 1280x800
    [ 45238.707] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 45238.707] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
    [ 45238.707] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
    [ 45238.707] (==) intel(0): DPI set to (96, 96)
    [ 45238.707] (II) Loading sub module "fb"
    [ 45238.707] (II) LoadModule: "fb"
    [ 45238.707] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 45238.707] (II) Module fb: vendor="X.Org Foundation"
    [ 45238.707] compiled for 1.9.0, module version = 1.0.0
    [ 45238.707] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 45238.707] (II) UnloadModule: "vesa"
    [ 45238.708] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 45238.708] (==) Depth 24 pixmap format is 32 bpp
    [ 45238.708] (II) intel(0): [DRI2] Setup complete
    [ 45238.708] (II) intel(0): [DRI2] DRI driver: i965
    [ 45238.708] (**) intel(0): Tiling enabled
    [ 45238.708] (**) intel(0): SwapBuffers wait enabled
    [ 45238.708] (==) intel(0): VideoRam: 262144 KB
    [ 45238.708] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
    [ 45238.719] (II) UXA(0): Driver registered support for the following operations:
    [ 45238.719] (II) solid
    [ 45238.719] (II) copy
    [ 45238.719] (II) composite (RENDER acceleration)
    [ 45238.719] (II) put_image
    [ 45238.719] (II) get_image
    [ 45238.719] (==) intel(0): Backing store disabled
    [ 45238.719] (==) intel(0): Silken mouse enabled
    [ 45238.719] (II) intel(0): Initializing HW Cursor
    [ 45238.745] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 45238.755] (==) intel(0): DPMS enabled
    [ 45238.755] (==) intel(0): Intel XvMC decoder enabled
    [ 45238.755] (II) intel(0): Set up textured video
    [ 45238.755] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 45238.755] (II) intel(0): direct rendering: DRI2 Enabled
    [ 45238.755] (--) RandR disabled
    [ 45238.755] (II) Initializing built-in extension Generic Event Extension
    [ 45238.755] (II) Initializing built-in extension SHAPE
    [ 45238.755] (II) Initializing built-in extension MIT-SHM
    [ 45238.755] (II) Initializing built-in extension XInputExtension
    [ 45238.755] (II) Initializing built-in extension XTEST
    [ 45238.755] (II) Initializing built-in extension BIG-REQUESTS
    [ 45238.755] (II) Initializing built-in extension SYNC
    [ 45238.755] (II) Initializing built-in extension XKEYBOARD
    [ 45238.755] (II) Initializing built-in extension XC-MISC
    [ 45238.755] (II) Initializing built-in extension SECURITY
    [ 45238.755] (II) Initializing built-in extension XINERAMA
    [ 45238.755] (II) Initializing built-in extension XFIXES
    [ 45238.755] (II) Initializing built-in extension RENDER
    [ 45238.755] (II) Initializing built-in extension RANDR
    [ 45238.755] (II) Initializing built-in extension COMPOSITE
    [ 45238.755] (II) Initializing built-in extension DAMAGE
    [ 45238.767] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 45238.767] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 45238.767] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 45238.767] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 45238.767] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 45238.767] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    [ 45238.767] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 45238.768] (II) intel(0): Setting screen physical size to 338 x 211
    [ 45238.886] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 45238.886] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 45238.886] (II) LoadModule: "evdev"
    [ 45238.886] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 45238.886] (II) Module evdev: vendor="X.Org Foundation"
    [ 45238.886] compiled for 1.9.0, module version = 2.5.0
    [ 45238.886] Module class: X.Org XInput Driver
    [ 45238.886] ABI class: X.Org XInput driver, version 11.0
    [ 45238.886] (**) Power Button: always reports core events
    [ 45238.886] (**) Power Button: Device: "/dev/input/event2"
    [ 45238.899] (--) Power Button: Found keys
    [ 45238.899] (II) Power Button: Configuring as keyboard
    [ 45238.899] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 45238.899] (**) Option "xkb_rules" "evdev"
    [ 45238.899] (**) Option "xkb_model" "evdev"
    [ 45238.899] (**) Option "xkb_layout" "us"
    [ 45238.934] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 45238.934] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 45238.934] (**) Video Bus: always reports core events
    [ 45238.934] (**) Video Bus: Device: "/dev/input/event4"
    [ 45238.943] (--) Video Bus: Found keys
    [ 45238.943] (II) Video Bus: Configuring as keyboard
    [ 45238.943] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 45238.943] (**) Option "xkb_rules" "evdev"
    [ 45238.943] (**) Option "xkb_model" "evdev"
    [ 45238.943] (**) Option "xkb_layout" "us"
    [ 45238.945] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
    [ 45238.945] (II) No input driver/identifier specified (ignoring)
    [ 45238.946] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 45238.946] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 45238.946] (**) Sleep Button: always reports core events
    [ 45238.946] (**) Sleep Button: Device: "/dev/input/event1"
    [ 45238.953] (--) Sleep Button: Found keys
    [ 45238.953] (II) Sleep Button: Configuring as keyboard
    [ 45238.953] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 45238.953] (**) Option "xkb_rules" "evdev"
    [ 45238.953] (**) Option "xkb_model" "evdev"
    [ 45238.953] (**) Option "xkb_layout" "us"
    [ 45238.956] (II) config/udev: Adding input device Acer Crystal Eye webcam (/dev/input/event7)
    [ 45238.956] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard catchall"
    [ 45238.956] (**) Acer Crystal Eye webcam: always reports core events
    [ 45238.956] (**) Acer Crystal Eye webcam: Device: "/dev/input/event7"
    [ 45238.963] (--) Acer Crystal Eye webcam: Found keys
    [ 45238.963] (II) Acer Crystal Eye webcam: Configuring as keyboard
    [ 45238.963] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD)
    [ 45238.963] (**) Option "xkb_rules" "evdev"
    [ 45238.963] (**) Option "xkb_model" "evdev"
    [ 45238.963] (**) Option "xkb_layout" "us"
    [ 45238.963] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 45238.964] (II) No input driver/identifier specified (ignoring)
    [ 45238.971] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
    [ 45238.971] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 45238.971] (**) AT Translated Set 2 keyboard: always reports core events
    [ 45238.972] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
    [ 45238.979] (--) AT Translated Set 2 keyboard: Found keys
    [ 45238.979] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 45238.979] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 45238.979] (**) Option "xkb_rules" "evdev"
    [ 45238.979] (**) Option "xkb_model" "evdev"
    [ 45238.979] (**) Option "xkb_layout" "us"
    [ 45238.980] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event5)
    [ 45238.980] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
    [ 45238.980] (**) PS/2 Mouse: always reports core events
    [ 45238.980] (**) PS/2 Mouse: Device: "/dev/input/event5"
    [ 45238.993] (--) PS/2 Mouse: Found 3 mouse buttons
    [ 45238.993] (--) PS/2 Mouse: Found relative axes
    [ 45238.993] (--) PS/2 Mouse: Found x and y relative axes
    [ 45238.993] (II) PS/2 Mouse: Configuring as mouse
    [ 45238.993] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
    [ 45238.993] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 45238.993] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
    [ 45238.993] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
    [ 45238.993] (**) PS/2 Mouse: (accel) acceleration profile 0
    [ 45238.993] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
    [ 45238.993] (**) PS/2 Mouse: (accel) acceleration threshold: 4
    [ 45238.993] (II) PS/2 Mouse: initialized for relative axes.
    [ 45238.993] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
    [ 45238.993] (II) No input driver/identifier specified (ignoring)
    [ 45238.994] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
    [ 45238.994] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
    [ 45238.994] (II) LoadModule: "synaptics"
    [ 45238.994] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 45238.994] (II) Module synaptics: vendor="X.Org Foundation"
    [ 45238.994] compiled for 1.9.0, module version = 1.3.0
    [ 45238.994] Module class: X.Org XInput Driver
    [ 45238.994] ABI class: X.Org XInput driver, version 11.0
    [ 45238.994] (II) Synaptics touchpad driver version 1.3.0
    [ 45238.995] (**) Option "Device" "/dev/input/event6"
    [ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
    [ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
    [ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
    [ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
    [ 45239.033] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
    [ 45239.033] (**) Option "EmulateTwoFingerMinZ" "40"
    [ 45239.033] (**) Option "EmulateTwoFingerMinW" "5"
    [ 45239.033] (**) Option "VertEdgeScroll" "on"
    [ 45239.033] (**) Option "CornerCoasting" "1"
    [ 45239.033] (**) Option "VertTwoFingerScroll" "on"
    [ 45239.033] (**) Option "RBCornerButton" "3"
    [ 45239.033] (**) Option "LTCornerButton" "2"
    [ 45239.033] (**) Option "TapButton1" "1"
    [ 45239.033] (**) Option "TapButton2" "2"
    [ 45239.033] (**) Option "TapButton3" "3"
    [ 45239.033] (**) Option "CoastingSpeed" "0.5"
    [ 45239.033] (**) Option "CoastingFriction" "0"
    [ 45239.059] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 45239.059] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 45239.073] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
    [ 45239.073] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
    [ 45239.099] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 45239.100] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
    [ 45239.100] (II) No input driver/identifier specified (ignoring)
    [ 45242.575] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 45242.575] (II) intel(0): Printing DDC gathered Modelines:
    [ 45242.575] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 45243.125] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 45243.125] (II) intel(0): Printing DDC gathered Modelines:
    [ 45243.125] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 45245.428] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 45245.428] (II) intel(0): Printing DDC gathered Modelines:
    [ 45245.428] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 45248.639] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 45248.639] (II) intel(0): Printing DDC gathered Modelines:
    [ 45248.639] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70602.586] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70602.586] (II) intel(0): Printing DDC gathered Modelines:
    [ 70602.586] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70602.803] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70602.803] (II) intel(0): Printing DDC gathered Modelines:
    [ 70602.803] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70603.146] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70603.146] (II) intel(0): Printing DDC gathered Modelines:
    [ 70603.146] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70603.358] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70603.358] (II) intel(0): Printing DDC gathered Modelines:
    [ 70603.359] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70603.518] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70603.518] (II) intel(0): Printing DDC gathered Modelines:
    [ 70603.518] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 70603.662] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 70603.662] (II) intel(0): Printing DDC gathered Modelines:
    [ 70603.662] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [ 90776.420] (II) intel(0): EDID vendor "LGD", prod id 502
    [ 90776.420] (II) intel(0): Printing DDC gathered Modelines:
    [ 90776.420] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122487.594] (II) intel(0): EDID vendor "LGD", prod id 502
    [122487.594] (II) intel(0): Printing DDC gathered Modelines:
    [122487.594] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122488.139] (II) intel(0): EDID vendor "LGD", prod id 502
    [122488.139] (II) intel(0): Printing DDC gathered Modelines:
    [122488.139] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122488.784] (II) intel(0): EDID vendor "LGD", prod id 502
    [122488.784] (II) intel(0): Printing DDC gathered Modelines:
    [122488.784] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122488.980] (II) intel(0): EDID vendor "LGD", prod id 502
    [122488.980] (II) intel(0): Printing DDC gathered Modelines:
    [122488.980] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.174] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.174] (II) intel(0): Printing DDC gathered Modelines:
    [122489.174] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.321] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.321] (II) intel(0): Printing DDC gathered Modelines:
    [122489.321] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.470] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.470] (II) intel(0): Printing DDC gathered Modelines:
    [122489.470] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.617] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.617] (II) intel(0): Printing DDC gathered Modelines:
    [122489.617] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.756] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.756] (II) intel(0): Printing DDC gathered Modelines:
    [122489.756] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122489.903] (II) intel(0): EDID vendor "LGD", prod id 502
    [122489.904] (II) intel(0): Printing DDC gathered Modelines:
    [122489.904] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [122490.054] (II) intel(0): EDID vendor "LGD", prod id 502
    [122490.054] (II) intel(0): Printing DDC gathered Modelines:
    [122490.054] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165444.489] (II) intel(0): EDID vendor "LGD", prod id 502
    [165444.519] (II) intel(0): Printing DDC gathered Modelines:
    [165444.519] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165445.260] (II) intel(0): EDID vendor "LGD", prod id 502
    [165445.260] (II) intel(0): Printing DDC gathered Modelines:
    [165445.261] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165445.519] (II) intel(0): EDID vendor "LGD", prod id 502
    [165445.519] (II) intel(0): Printing DDC gathered Modelines:
    [165445.519] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165445.682] (II) intel(0): EDID vendor "LGD", prod id 502
    [165445.682] (II) intel(0): Printing DDC gathered Modelines:
    [165445.682] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165445.827] (II) intel(0): EDID vendor "LGD", prod id 502
    [165445.827] (II) intel(0): Printing DDC gathered Modelines:
    [165445.827] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165446.027] (II) intel(0): EDID vendor "LGD", prod id 502
    [165446.027] (II) intel(0): Printing DDC gathered Modelines:
    [165446.027] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165446.234] (II) intel(0): EDID vendor "LGD", prod id 502
    [165446.234] (II) intel(0): Printing DDC gathered Modelines:
    [165446.234] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165446.409] (II) intel(0): EDID vendor "LGD", prod id 502
    [165446.409] (II) intel(0): Printing DDC gathered Modelines:
    [165446.409] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165446.638] (II) intel(0): EDID vendor "LGD", prod id 502
    [165446.639] (II) intel(0): Printing DDC gathered Modelines:
    [165446.639] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165446.798] (II) intel(0): EDID vendor "LGD", prod id 502
    [165446.798] (II) intel(0): Printing DDC gathered Modelines:
    [165446.798] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165447.035] (II) intel(0): EDID vendor "LGD", prod id 502
    [165447.035] (II) intel(0): Printing DDC gathered Modelines:
    [165447.035] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165447.227] (II) intel(0): EDID vendor "LGD", prod id 502
    [165447.227] (II) intel(0): Printing DDC gathered Modelines:
    [165447.227] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [165450.227] (II) intel(0): EDID vendor "LGD", prod id 502
    [165450.227] (II) intel(0): Printing DDC gathered Modelines:
    [165450.227] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    [edit] I haven't had any problems the since I disabled all the extra stuff. I don't feel like finding the exact cause since I think it was specific to my own setup... though I suspect syndaemon. I'll go ahead and mark this as solved... again. Thanks for the help.
    Last edited by drsjlazar (2010-10-13 14:44:37)

  • ITunes and QuickTime stopped working after an upgrade...

    I have been pulling my hair out trying to get my iTunes working again. Here is what I have done already in order:
    1. Does not work regardless of user (http://docs.info.apple.com/article.html?artnum=302856)
    2. Tried running with changes to MSCONFIG
    - Ran according to Apple Support Web Site (http://docs.info.apple.com/article.html?artnum=302538)
    - Ran in Diagnostics mode
    - Ran in /SAFEMODE
    3. Uninstalled and removed from any reference from registry
    4. Removed iTunes configuration files (http://docs.info.apple.com/article.html?artnum=302386)
    5. Installed WinInspector Spy and launched iTunes to see what happened. Unfortunately I have not figured out how to copy and paste the log, but it shows the iTunes window class being created, a bunch of other stuff, then the OfficeWatson class, stuff and then the infamous "iTunes has encountered a problem and needs to close" message. After hitting the Send Error Report, I see the OfficeWatson window being destroyed and that is it. This leads me to believe that the problem is somehow with the outlook integration between iTunes and Windows? So I looked in my Add/Remove programs and sure enough Office and Outlook were upgraded the day after the last time i was able to use iTunes. So I tried uninstalling Office, iTunes and QuickTime. QuickTime refused to uninstalled claiming a fatal error. I then forcably removed it as described in the apple knowledge paper. Another interesting point, when I ran QuickTime, nothing happens, not even a crash message. When I run QuickTime Preferences from the system tray, the dialog shows, but when I click on the FileTypes tab, I get a RUNDLL error: "An exception occurred while trying to run "Shell32.dll, Control_RunDLL "C:\Program Files\QuickTime\QTSystem\QuickTime.cpl".
    I also tried running StraceNtX.exe against it, but it doesnt create the right environment for iTunes (it thinks it is Windows 2000 and does have the right service pack).
    PLEASE can someone help? This is the second time this has happened to me. The first time was on another computer that came with a "real" restore point (not the stupid one Windows has that does not work) and I solved it by simply restoring back in time. This time I do not have that option!
    ARGH - I really do not want to have to use Media Player.
    Is there a way to force a stack trace? I am a UNIX programmer and not familiar with Windoze.
    Bryan
    DELL Latitude 820, Intel Core 2 Duo, 4GB Ram

    It sounds as though things have got pretty screwed up. If you couldn't clean things up properly with the MS installer cleaup, there is thread on cleaning up uninstall information in the registry.
    http://discussions.apple.com/thread.jspa?messageID=3637190&#3637190
    I am not sure that I have anything more to offer as you appear to have done most things. Have you tried turning off all security software while doing the install, and doing the MSconfig thing with just Quicktime. Presumably your system is free of malware?
    As a matter of interst, what happens if you have the task manager running when you start Quicktime, does it start and then stop, or keep running or not start at all?
    A few people seem to have these intractable problems and the forum expert on this has been away since christmas, but you could try searching the forum for "b noir" posts about install/launch problems.

  • Win 7 Drag and Drop stopped working after iTunes update

    I really hope that this is the right sub-forum for this.
    Here goes:
    A few days ago I finally upgraded to 9.1.1.12 and today I was in for a nasty surprise: I can't move MP3s from windows explorer into the iTunes window any more.
    I often create playlists and then drag files I get from a few bands I follow directly into those playlists. This is an easy and painless process. My FTP client downloads the files into a prearranged folder whenever they get a new song up, and I then open said folder and drag and drop the file into iTunes.
    I just got a new song to listen to today, wanted to drag it in an... Nothing. Just the black, crossed-through circle of "No".
    It worked last week. It worked the week before. It worked the years before.
    I got Win7 64 in April. It worked on it since then.
    It stopped working today.
    And no, I won't let iTunes consolidate or organize my media. It only organizes files bought via the iTunes store, nothing I rip from CDs or obtain otherwise, as those files have to be playable by two other players as well. But, again: Until this night it worked without a problem. And after the new update... Stopped.
    Is there a new option I'm missing?

    I was able to fix it.
    I simply stopped running iTunes in Admin mode. For some reason, running it in administrator mode makes it behave "worse" than not doing so.
    When I ran it as a normal program, I was able to drag files into it correctly again.
    Which is weird, as the last version was also running in admin mode, but worked perfectly.

  • Why Bookmarks Bar and Menu both? Seem to be the same.

    Have extensive collections in Bookmarks Bar with numerous bookmarks in each collection. What will Bookmarks Menu do that Bar won't?

    What will Bookmarks Menu do that Bar won't?
    Allow you to have less stuff on your window if you so desire.

  • Mouse and keybord stopped working after upgrading to Mavericks.

    Since upgrading from snow Leopard to Mavericks, the Apple USB keyboard and mouse nolonger work on my Mac Pro. I've tried booting in safe mode sucsessfuly, but the keyboard and mouse still don't work. Can anybody help me please?
    Thanks,
    Dave

    Test the devices with another computer, if possible. If they work, or if you can't test, see below.
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Maybe you are looking for