Bookmark file is of unknown format..?? :(
I have firefox 3.6 installed on my system.I uninstalled it and during that i created backup of bookmarks.Didnt realize in wht format it was saving them.
After reinstalling firefox 3.6 i restored from the backup file.Two three days later my pc screwed up.I had to redo windows and now after installing 3.6 when i went to restore boookmarks the file of unknown format and it fails to restore.
A JSON file needs to have a .json file extension, otherwise Firefox won't recognize it as such.<br />
You may need to add quotes around the name ("bookmarks.json") to force a new file extension on Windows.
Similar Messages
-
<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/887204]]</blockquote>
I've usd RecMyFile to recover .JSON file but I get "Unable to process the backup file" be like Unknown format
like this > http://goo.gl/pHTkr < Please help me PleaseAll worked very well - this is a good solution. The key was finding the Profiles in my Users folder.
-
What I view the dbx files are of unknown format from TEMP directory?
When you start Outlook Express DBX file to create a push, but after the program can not find it. There is a configuration change that? In the TEMP folder found files, but they are of unknown format, what I view the dbx files?
The user of the DBX Viewer Tool can recover mail messages from *.dbx files in the batch mode. If you recover messages in the Batch mode, messages are extracted from *.dbx files one by one and immediately saved to the hard drive. Batch message recovery can be
used to recover correspondence from a large number of corrupted *.dbx files simultaneously.
http://www.dbx.viewertool.com/ The Batch Mode will allows you to considerably save time and effort spent on organizing the process of recovering messages from corrupted *.dbx files. Read it: http://www.filerepairforum.com/forum/microsoft/microsoft-aa/outlook-express/966-i-need-to-dbx-viewer-tool-advise-me-anything -
Adobe Bridge saving my edited files in an 'unknown format' - Losing my work
When I edit an image in Photoshop through Adobe Bridge and save it as a jpeg, it is not saving as selected. Instead, it is saving the edited image in an 'unknown' and unusable format. I loose my editing work. I discovered this doesn't happen if I save the image in a new folder but I would still like to fix this problem; I've been editing for two years without this issue. Has anyone else experienced this problem or know how to fix it?
Adobe Bridge does not "save", open or edit anything other than the metadata. The files are saved by whatever application hands them to them, whether that be Photoshop, Camera Raw, Illustrator, MS Word or whatever.
If files are being lost in just one folder, you have corruption in that particular folder. The first step is to go to the Tools menu in Bridge, and run the "Purge Cache for Folder 'xxxxyyy'" command. The next step is to create a brand new folder, not inside the corrupted one, and move all your files there.
You should also run Apple's Disk Utility to Repair the Disk and to Repair Permissions for your disk.
Next time, please provide details about your setup.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
CS6 on Mac says .eps file is an unknown format and cannot be opened
Trying to open a logo sent by a client an PS, AI, and ID have all given me an error saying that .eps is an invalid format. It's the only logo file available from the client, so my options are limited. First time I've had an issue with this ever, so not entirely sure what troubleshooting steps to go through. I've tried opening it in CS5 as well and I've tried changing the file extension to make it recognizable.
Create a new file in Illustrator and then place the EPS in it (embedded). Maybe works.
-
I spent several hours designing a file in CS3. I went to "Save as Web & Devices" and my MAC froze and I had to reboot. I now cannot open the illustrator file without getting the "file is an unknown format and cannot be opened" error. I have tried dropping the file in Distiller, placing in InDesign and trying to place into a blank illustrator file with no luck. I have even tried to open the file in Photoshop file. All attempts say the file is unknown. Did the crash corrupt the illustrator file? If so, is there a way to recover. I pray there is!! I do not want to redesign this project again!!! HELP!!
Hi timnancyk,
If you see this message, please contact with me by email: [email protected] for our project that you selected me. My nick:bestsoftvn.
Thank you -
When I open CS4 is says print.ai unknown format
I try to open a file and it says the file format is unknown. I try to create a new file and it says that the print.ai file is an unknown format. Won't let me do anything. How do I fix it?
Your file associations got mucked up somehow. You may need to reinstall to force Windows to reset the registry.
-
Unable to open .eps file "unknown format and cannot be opened" ?
A client sent me an .eps file (logo). I tried opening it in Illustrator AND photoshop (just to see if it was saved in one vs the other program) - however to no avail.
Illustrator gives me a message "unknown format and cannot be opened"
Photoshop gives me a message "photoshop was unable to parse the postscript".
I'm using Adobe CS4, and I've never seen this message before—would love to know what this means and how to resolve?
File attached if anyone is able to open / fix it?
Thanks kindly,
ChemolThanks for the advice Scott - does compression improve the .eps? Is it
silly for me to ask them to compress it since the file is only 766 KB
(that's how big the attachment is in my email - though I am unable to open
it)?
My friend is able to open it on his end - however the 3rd person (client) is
the one who sent it, and I have already requested a different version - no
response from them yet. Unfortunately what the company "has" is what he
will likely give to me again (ie: same file / unable to open). So ... I am
curious about how I can resolve this issue on my end - if possible?
Do you know what the AI and Photoshop error messages mean? Could the issue
be a mac vs PC concern? Or is it a corrupt file? Could it be a software
version issue (old vs new) ... or Quark incompatibility?
.... just guessing at this point....Any insight as to what different
scenarios may apply in this situation would be greatly appreciated ..thank
you. -
why can't I download from kuler, my computer doesn't recognise the .ase files its says its an unknown format, can anyone help please?
why can't I download from kuler, my computer doesn't recognise the .ase files its says its an unknown format, can anyone help please?
-
I used footage from the same camera (taken on the same weekend using the same settings) in several different iMovie "projects". All were shared from iMovie 11 as "File" using the quality setting "SD 480p".
In Quicktime Player, all ".mp4" files will play and they show the following info in its inspector:
Format: H.264, 854 x 480
AAC, 48000 Hz, Stereo (L R)
FPS: 29.97
One exported file will drag, drop, and burn in iDVD just fine. The other two files show the error "Unsupported File Type : Unknown format" as soon as I try and drag them into iDVD.
The only difference I can find is that the one file that works is about 803MB, while the files that don't work are 1.87GB and 3.98GB.
All files and the iDVD project are in the same folder on my startup volume. I've tried deleting com.apple.idvd but that didn't help. I've tried rebooting and starting the iDVD project from scratch but I get the same results.
Mac OS 10.9.1
iMovie 10.0.1
iDVD 7.1.2
Any ideas?Hello Bengt and thank you again for the replies.
As I mentioned in my previous posts, I'm using iMovie 10.0.1 which has very limited quality adjustments. In every case I chose the smallest size, which iMovie 10.0.1 calls "SD 480p (854 x 480)". I used this same setting on all exports.
I still have iMovie HD (6.0.4) and iMovie '11 (9.0.9) on my iMac so I tried both of them. In both cases, they could import only the file that works in iDVD. Both older versions of iMovie choked on the longer movies shared from iMovie 10.0.1.
I have many many hours into the editing of these clips and I do not want to have to go back and redo everything in an older version of iMovie. Might I be better off going with a different DVD creation software? Or am I out of luck? Because I can't really change iMovie 10.0.1's export settings, I'm afraid there's nothing I can do to get it to export it as something that iDVD can use (really, I can't even tell why it's different and why iDVD doesn't like it).
The software "WonderShare DVD Creator" has no issue with any of the files I've exported from iMovie 10.0.1. -
Importing .mov "Unsupported File Type : Unknown format" error
I have a .avi video from a camera and wanted to burn to a dvd to watch on dvd player. I converted the video to .mov but when I dragged into iDVD I received an error stating "Unsupported File Type : Unknown format". I converted to a .mp4 hoping that might work and had the same error. As far as I remembered .mov and .mp4 should work in iDVD and iMovie but I had the same error in both programs.
Converted to .mov with iSquint, and to .mp4 with Quicktime.
Any suggestions?hi,
thank you for responding... i followed your instructions and this is what comes up when i try to open the movie:
QuickTime Player can't open_______.mov
To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More.
i've done nothing different with this movie. it's the 2nd part of a longer project that i had to break into two parts. the first part was successfully burned to disk. i'm at a loss as to why this one is 'different' and why anything else might be required to make it work properly.
btw, here's the info from the entire project:
format: DV/DVCPRO - NTSC, 720 x 480 (853 x 480)
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
fps: 29.97
data size: 42 GB
data rate: 30.31 Mbit/s
current size: 853 × 480
rsvp...
~ tj -
Unsupported File Type : Unknown format - idvd surely knows .mov
I have just installed IDVD 7 03 (ilife'09) and it won't take in .mov or .mp4 or any other video format.
I'm on macbook pro 10.5.8.
Unsupported File Type : Unknown format - comes up when I drag it over.
Begging for help here! Have a client waiting on a DVD i promised!I don't really know but feel doubtful as
DVD is as standard - interlaced SD-video with a frame rate of 25 fps (PAL) or 29.97 fps (NTSC)
the feeding it progressive material in HD and in some cases as 24 fps - must be problematic.
I would
a. Import my movie into iMovie
b. Share to Media Browser and as Large (not HD or other res. as result will suffer)
c. In iDVD import from Media button and Movie and here find Your movie and drop it into iDVD menu window
Yours Bengt W -
Trying to import dvd into iDVD,it says Unsupported File Type:Unknown format
Hi there,
I just had a home movie transferred from vhs to dvd. Now I am trying to import it into iDVD and when i try to the message appears : Unsupported File Type :Unknown format
Logical Volume Identifier/VIDEO_TS.
I wanted to put the home movie to music (it allowed me to import the song, not the video).
It says the kind of file is UNIX Executable File.
Any help would be appreciated.
Thanks.to do this you would first need to convert the DVD (mpeg 2) to QT so you can import to iDvd which btw involves a quality hit. There are apps out there that can do this at a marginal level ... for example:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.products.htm -
I have fla files and when I opened by flash cs5 11.5.1 it says "An error occurred opening file". I tried sure to make it rar or zip and repair it. When I opened by WinRar it says "The archive is either in unknown format or damaged"
Please Please Please Help ME !!!!! .. I have been done a lot of work on it .. I am so tired .. Please Help Me Please
Thank you so muchdo you have a working swf?
if so, you can decompile it and recover some or all your work.
if not, are you able to rename the fla to a rar and then unrar it? -
User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!
First, ask in the forum for the program you are using
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Second, do a complete scan with a good anti-virus program to be sure your computer is clean... I use Norton, there are others
Maybe you are looking for
-
Phone asked for voicemail password after update to iOS5. I pushed cancel bc I didn't know it. Now I now it but the screen just says set-up. How do I get the prompt to appear again?
-
Wich one is better for home use. Nothing powerfull.
Hello People. I would like to know. Wich one is the best "all day" use Macbook. I don't use nothing special. Just Browse the web and listen to music or airplay, those things. Macbook Pro, or Macbook air?
-
Need the file extensions database table name
Hi, I need to know the Database table name for file extensions in WCC. Please check the image for reference .
-
Does anyone know why there is a moving shadow under the calendar app in my dock?
It started blinking randomly and I am wondering if it means anything. I am including 2 pictures, to show the two images it would change to. Any help would be appreciated. I realize that it probably nothing, but I have been having issues as of late wi
-
Issue with items that really do have a 0 (zero) price.
If we have items that have a price of 0. SAP allows us to enter this in price lists but does not agree when we use this item on an order because it does not accept that the price is 0. Please tell us what we should do. I do not like the solution of