Bookmark links stop working after security applied - v7.1.0

System:
Windows XP SP2
Office 2007 SP1
Acrobat Pro 7.1.0
In Word 2007, I created a top menu of links that use bookmarks to jump down the page to various topics. When I Save As to PDF, the created PDF top menu links work. When I secure the PDF with a password, the top menu links stop working. However, Web links continue to work. What is causing the top menu links to stop working?

>The links are in the document, not the Bookmark panel.
Ok, that's fine. They are form fields, almost certainly.
> How does one allow form filling for a document that is not a form?
Actually, if the links are form fields, it really is a form. But that
doesn't matter.
You just have to set Changes allowed: filling in form fields and
signing existing signature fields in the Permissions box.
Aandi Inston

Similar Messages

  • Behringer UCG102 Guitar Link stop working after upgrade to Lion

    Hi,
    I  have a Behringer UCG102 Guitar Link that worked in the past (using Mac OS X Snow Leopard without any special driver, before upgrading to Mac OS X Lion) without any problem but now has stopped working. The device is working properly on Windows computers. Also I recently bougth a Behringer Xenyx  2442USB mixer and tested on a windows computer and it works perfectly. So I think it is not a problem with my mixer hardware neither my guitar link unit.
    But when I try to use it any of them on my Apple MacBook Pro running Mac OS X Lion (10.7.3) they do not work. I can reproduce sounds coming from my computer to the mixer, but I'm not able to record nothing. I've followed the indications. In the Audio/Midi settings application I select USB Audio Codec as default Input and output device. I did the same on the "System Preferences -> Sounds".
    Also in any recording application tested (Audacity, GarageBand, EnergyXT2.5) I selected again as input source the one labeled as "USB Audio Codec", but no sound is recorded.
    I've noticed that in "System Preferences -> Sounds" in the input section, when I select "USB Audio CODEC" as device for sound input, it is not possible to change the settings for that device (it shows "The selected device has no input controls" and the Input level bar is completely at left. If I select the integrated microphone I'm able to select the input level and the bar shows the sounds the microphone record.
    Something similar happens with the Audio MIDI Setup application where in the input section of the USB Audio CODEC all the level controls (Master, 1, 2) are disabled and grayed
    It is clearly a problem in the driver in the latest version of the operating systems, and it seems this bug have been already reported by many people. Does Apple have any plan to solve that issue?

    If you can put a step by step tutorial with pictures I would greatly appreciate, because i could not make the UCG 102 work and I used it a lot on my other computer with windows to use Impulses to simulate cabs, so if you can do it I would love it !!! Sorry for my bad english

  • Bank links stopped working after 5.1.4 Update

    I use Safari to download my banking information.  After the last Safari upgrade (5.1.4) I can log on but cannot open links to the different accounts.  I can "exit" but cannot navigate deeper into the site.
    Using early 2008 MacBook Pro 15 with Lion.  It won't work using my iMac but will work using Internet Explorer on a PC.

    HI ..
    Try deleting the cache.db associated with Safari.
    Quit Safari.
    Go to    ~/Library/Caches/com.apple.Safari/Cache.db. Move the Cache.db file to the Trash.
    Relaunch Safari to test.
    If that didn't help, install the Java for OS X Lion Update 1
    Then restart your Mac. Try Safari again ..
    ~ (Tilde) character represents the Home folder.
    For Lion v10.7x:  To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library
    edited by:  cs

  • My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

    My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

    i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

  • After Updating to Flash Player 9 Links stopped working

    After I updated my flash plugin to 9 some of my flash links
    stopped working. Our site uses CMS to upload the flash files. I
    built them using actionscript 2. It's not all of the Swf that were
    affected just some of them, but they were all built the same. On
    release, get URL script. I tried it on a mac and a pc and neither
    worked in firefox, safari, IE, or opera. I did a uninstall and
    installed flash player 8, and everything works again. Its pretty
    random anybody have any ideas?
    Heres the page that does'nt work, but just the pant and
    jacket links, not the ones in the header at the top.
    http://www.sessions.com/snow.php?sid=3&gtype=M

    It's just a regular link.
    on (release) {
    getURL("
    http://www.sessions.com/thumbs.php?psid=204&sid=2&gtype=W",
    "_self");
    I didn' t build the site could it be something in the
    php?

  • I get this message "License Expired The trial license on your device has expired. After 30 days,your device will stop working. To apply for a platform license,please contact your equipment vendor."

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/757271]</blockquote><br>
    The complete message I get is "License Expired
    The trial license on your device has expired.
    After 30 days,your device will stop working.
    To apply for a platform license,please contact your equipment vendor.
    We apologize for any inconvenience.
    Please reenter your URL and continue your web experience." It may be related to Adobe products. I am currently accessing the net from China. I am able to reload and reach the pages, eventually.

    There are no billing issues, I have checked it.
    Adobe CC does not require serial number, to install & activate it, please go to www.creative.adobe.com .Download, install & activate it from there.
    Please let me know if it is asking for serial number when you are trying to activate the CC.
    Do refer to: http://forums.adobe.com/message/6288501
    In that case, you can follow http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html.
    Regards
    Rajshree

  • Send Link and Mail To are stop working after update to FF v.13 on WinXP

    Send Link and Mail To where stopped working after upgrade to FF13 on win XP. I'd appreciate any suggestions.
    Thank you in advance

    Can you check to see whether your mailto setting got changed?
    orange Firefox button ''or'' classic Tools menu > Options > Applications
    In the Search box above the list, type or paste '''mailto''' and pause while Firefox filters the list. On the right side, you can select your mail application. Unless it's missing. Are you able to establish the connection?

  • Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

    Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

    Remove the extensions, redownload Safari, reload the extensions.
    http://www.apple.com/safari/download/
    And if you really want a better experience, use Firefox, tons more choices and possibilities there.
    Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
    https://addons.mozilla.org/en-US/firefox/addon/noscript/
    Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

  • USB hub and internet sharing stop working after sleep

    Hi,
    I have a relatively new Bluestork USB hub I purchased to connect multiple USB devices I have at the same time. It used to work correctly under Leopard, but now it stops working each time the computer wakes up from sleep. I have to restart the computer for it to start working again. Both link and power LEDs stay on, even when the hub is not recognized.
    My second problem is related to internet sharing. It stops working after each sleep/wakeup cycle and the only way to make it work again is to restart the computer. It used to work correctly before Snow Leopard as well.
    I have all the Mac updates installed.

    Thanks Barry.
    The hub is on its way to the manufacturer for after sales service...
    But the issue with AirPort remains the same, even after resetting SMC.
    Some clarification:
    * It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
    * The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

  • Coldfusion 64 bit windows installer stops working after recent microsoft update

    Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
    My question is at the end.
    Trying to deploy coldfusion 9 enterprise 64 bit trial  version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
    Steps taken (remember, this is all 64 bit):
    1. Installed the base OS which was slipstreamed with SP2.
    2. Checked w/ microsoft and installed 63 OS updates.
    3. Launch the CF9 trial exe.
    4. As soon as the first screen finishes (the one that looks like  it is extracting files) then the second screen pops up (the one that  simply says CF Adobe Coldfusion 9) and the progress bar quickly moves  95% to the right and the install application quits. No error, no nothing. No log file either.
    5. After a moment of incredulous silence (and retrying/rebooting,  etc), I started to google it. I found nothing. However, I did find a  post (thanks dspent!) that was helpful in that it told how he was able  to get at a log file of sorts, by pre-extracting the  coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand.  (Dspent's install snafu was different than mine, but his post was very  valuable and got me started in the right direction.)
    6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
    7. From the windows directory created by step 6, I launched adobe_cf.exe.
    8. Same thing (the install application quits. No error, no nothing. No log file either.).
    9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
    10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
    11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
    12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
    13. Bingo! That install works.
    14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
    15. Back on the first server (the one with the MS security  patches installed and the one that CF won't install on). In the CF file  adobe_cf.lax (one of the files extracted in step 6) there is a line that  mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
    16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
    17. Modify a line in adobe_cf.lax :
       before
         lax.nl.current.vm=resource\\jre\\bin\\java.exe
       after
         lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
    (that assumes that you let step 16 install to the default location)
    Save the file.
    18. Run the install ... ** IT WORKS ** !
    Obviously, the built in java provided with the CF installer is  no longer compatible with some change introduced by some recent MS  update on the W2K3 64b SP2 platform.
    And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the  version of java.exe that is in that directory is the original version,  not the newer version I forced the installer to use).
    On the surface, CF seems to run OK, but I have not done any application testing yet.
    And finally my
    ** QUESTION **
    Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same  (close though) so I certainly don't want to break things by doing this,  but instinct tells me that if the installer broke using the older  version, then something else is gonna break down the road if I don't use  the new version. On the other hand, the differences in the  directories and files is enough that it makes me very nervous, with my  limitied java skill set, to make this decision. 
    Thanks in advance!!
    Byron

    Hi Byron,
    Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
    So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
    Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
    Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
    Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
    #java.home=C:/ColdFusion9/runtime/jre
    Add new line like so and save jvm.config:
    java.home=C:/Program Files/Java/jdk1.6.0_24/jre
    Note  there the slashes and the location of the JRE (runtime) - you need to  point to the one in JDK because the other JRE in C:\Program  Files\Java\jre6 will be missing a DLL.
    Start CF via SERVICES.msc.
    HTH, Carl.

  • My distributed form has stopped working after Acrobat did an update the form no longer appears in my tracker.

    I had a form that auto collected data through Adobe but it has stopped working after my Acrobat X Pro did an update.
    The form no longer appears in the tracker. How can this be fixed? I am using Windows 7.
    It would appear that since Adobe are going to be closing the Workspace area in January 2015 that when
    Acrobat did an update the ability to connect to files in the Workspace has been removed.
    Is there any way to reconnect the file back to the Tracker?
    Has anyone else had the same problem?
    Adobe don't seem interested in helping as this question has been posted for three days and yet no response.

    First and foremost thing you can do it is that reset your Firefox and after that change it to safe mode.This may be happening due to venerable links getting downloaded.
    enjoy free web..... :)
    regards,
    Gautam sharma.

  • I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

    I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • Help, 10.6.8 update, all usb ports stop working after 10hrs

    I've been running 10.5.8 for ever and finnaly tried to update to 10.6.8.. After I did it, the usb ports all kick out any connected devises after around 10 or so hours. I ran of the install disk, using disc utillty, disk repair, and repair permisions a few times and it did not help.
    I did the install a few times  again to try to see if it would help and didnt.
    i tried an erase and install and migrated everything over from my orignal back up external drive that is running 10.5.8 and issue is still  there.
    My old 10.5.8 back up external drive works fine and does not have this issue, and I have been using that as my start up drive instead and working from there. But that is not really a solution and a temp work around.
    Any suggestions would really help. thanks!

    I have a early 2008 macbookpro 2.8 duel with silver keys.
    I purchaed the 10.6 disk from the apple store. I've had the machine for years and purchased it refurbished from apple.
    I did the erase and install and migrated everything over from external drive, then did update to 10.6.8 and the usb ports still would stop working after a few hours.. Then I read on another apple community forus to reset pram, and pull out the power cable, take out the battery and hold power key for 5 seconds, then restart. that seemed to fix usb issue so far..
    But overall my computer seems to be running slower then when using just 10.5.8 and it did not wake from sleep once and I had to force power off and restart.. But maybe its just getting used to 10.6.8. we will see..
    Also, on another note, my battery is totally dead, and I can only run computer with power cable.. Will this affect things? it never did with 10.5.8..
    Oh, on my erase and install, I just did the simplest version and did not do the full erase to zero using he advanced security measures.. I just did the one where it writes on top of everything..

  • Adobe Edge Animate CC 2014.1  is totally not working. It stop working after 5min. Sometimes is stops the operating system.

    Adobe Edge Animate CC 2014.1  is totally not working. It stop working after 5min. Sometimes is stops the operating system. On on mac OS X Yosemite. macbook pro i7 2013.
    I reinstalled it not helping.
    Message was edited by: Daniel Boguszewski

    UPDATE
    i have ulpaded 2 animation ( one normal and one Responsive ) in 2 different server here the link
    www.eclipseadv.com/maliRP/maliRP.html
    Untitled
    via SAFARI or CHROME on MAC all OK
    but via IPAD ( SAFARI, CHROME and MERCURY) i didn't see the video, just the animation of the BUTTON  and the link if i click on it (not in Mercury), like in the content viewer.

  • Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
    I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.

Maybe you are looking for