Bookmark ribbon not appearing when pushing bookmark icon

I'm reading a Project Gutenberg book I downloaded from the iBooks store, and when I press the bookmark icon in the upper right of a page, no ribbon comes down to indicate it's marked. When I go to the list of bookmarks, only sometimes has a bookmark been registered, and when it has, it's for a spot a few pages earlier in the text.
If I click on the listed bookmark, iBook will take me to the page it claims I've marked, and the red ribbon will be there.
Is this just an issue with the epub formatting of some books, like this free one?

OK, I have a theory about how this thing is behaving; bookmarks seem to show up/behave as you would expect (when I tap on the ribbon) provided I have the font size set to something that appears to paginate the book to its original (just a guess on my part) layout. If I increase the font size to make things larger/more easily readable, then things get screwy as described above as the pagination bumps up the # of pages and the page #s where a ribbon gets place doesn't seem to correspond to the exact visible page I wanted it on. Confused? So was I, but the evidence seems to point to this.
Anyway, try this out and see if it doesn' behave as I described.
Bottom line - iBooks does not behave in a rational manner and therefore it is buggy in my opinion - i.e. this is not a "feature"...
I have no experience with other iBooks downloads. Steve Jobs is my first purchase - and this this is my introduction to iPad and iBooks and terribly ironic to discover behavior like this with the ode to Steve book - which, BTW, I am enjoying max.

Similar Messages

How do I know if private browsing is working? The purple mask does not appear when I click the mask icon. In my privacy settings "Never Remember" is selected.

I'm trying to confirm private browsing is working. Right now I have no way of knowing if it is on or not. The purple mask ,referred to in help, does not appear when selected. I should say in my privacy settings, I have selected "Never Remember" for history.

Do you mean you have checked the box: "Always use private browsing mode"? If so, it's intentional that the private browsing icon isn't displayed as we didn't want Firefox to be showing everyone within view that you're using private browsing mode IIRC.
There are some easy things you can do to confirm that you are in private browsing mode such as visiting a new website and then confirming it doesn't appear in the history window.

Bell icon (symbol) does not appear when i put my phone on silent

Bell icon (symbol) does not appear when i put my phone on silent (or vice-versa) when in standby mode. Help.

I would try a reset
Also look here
https://discussions.apple.com/message/9446783#9446783

Itunes icon does not appear when attepting to uninstall. Any suggestions?

When i click on iTunes is tells me I need to reinstall. (Error 7). However, itunes icon does not appear when attempting to unistall. Any suggestions?

I'm going to assume you are indeed using Windows Vista as your computer information states, and request this be moved to the Windows forum (it was posted in the iTunes for Mac forum).

HT3964 My tool bar and icons do not appear when I turn on my desktop iMac what can I do about it?

My tool bar and icons do not appear when my desktop boots up. Just wallpaper. Any ideas?

Does everything appear if you just click anywhere on the Desktop? This happens at random to me and it's a known bug (at least in 10.6.)

RoboHelp HTML v9 - Browse Sequence not appearing when generated

RoboHelp HTML v9
New project - eg not converted from previous version
Added a browse sequence as per the help documentation - I've followed the help documentation however when I get to view result of the generated WebHelp - the browse sequence is not present on the topic pages that were added to the browse sequence.
I read previous forum postings for RH8 - where reinstalling or repairing the software seemed to assist - however when I access through control panel - add/remove programs the only option in to Remove RH9.
So I thought I'd ask the question here before uninstalling.
There was also mention of a dll file that needs to be registered on the viewers pc before the browse sequence would appear and if this is the case due to the possible audience for the publish I would not be able to control that.
Any help is appriciated, thanks.

Hi
Thanks - I guess I was looking for the page icons that visualized the
sequence for the viewer.
That being said - the navigation arrows are present in my published file
however seem to hold no functionality - while on a topic that is within
the browse sequence clicking the arrows does not move through the
sequence.
I was initially looking for onscreen navigation for a series of topics -
I though browse sequence would do the trick but I think I will move to
another method.
Karen Voycey, BSc
Learning Solutions Specialist | Human Resources
10 Wellington St. E. | Toronto, ON | M5E 1L5
t. 416 366 7600 x 2451|1 800 569 1163 | cell +416 568 2551
[email protected]
Proud national insurance sponsor of the AIR MILES® Reward Program. For
more information go to www.rsagroup.ca.
RSA is a registered trade name of Royal & Sun Alliance Insurance Company
of Canada.
From:   Captiv8r <[email protected]>
To:     Karen Voycey <[email protected]>
Date:   13/07/2011 04:52 PM
Subject:        RoboHelp HTML v9 - Browse Sequence not appearing
when generated
Hi there
Your mention of: "the browse sequence is not present on the topic pages
that were added to the browse sequence" seems to imply that you are
expecting to see the sequence directly on those pages. But that usually
won't happen.
Perhaps it will help to start by viewing the link below:
http://www.robowizard.com/RoboWizard/NewProject.htm#MonthlyScry/012006.htm
Then come back with any questions you may have.
Cheers... Rick
http://www.robowizard.com/pc.gif
Helpful and Handy Links
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
http://www.gooberguides.com/ProductPages/RoboHelp/RoboHelp82Day.htm
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com

Ribbon not showing when form is opened

I have a 2007 application. In it I have create the Usys... table and created 3 ribbons.
1- Hide everything
2- Ribbon for my forms
3- Ribbon for my reports
I set my db option to startup with Ribbon 1, and this works. I associated ribbon 2, in my form's properties "Robbon Name", but when the form open, the ribbon does not display? Anyone have any ideas?
I can set any ribbon as my startup ribbon, they all appear to work. The issue is that it won't switch to ribbon 2 when the form is opened. When a report is opened however, ribbon 3 does appear. Why won't ribbon 2 appear when my form opens?
I have validated my XML using the Custom UI Editor & all 3 ribbons validate (Custom UI XML is well formed!).
Now I know ribbon 3 works, but if I associate that ribbon to the form, it will not display either. So it appear that it isn't because of the ribbon, but something else?
Another question while we are on the subject of ribbons. I litterally copy/pasted ribbon 2 to create ribbon 3 and then edited it as required, but some tabs, groups,... have the same names between the ribbons, can this be an issue or since they
start for scratch = true, it will have no impact?
Thank you,
Question.Boy

Hi,
the two best sites (in my opinion) to learn about ribbons:
www.accessribbon.de
www.andypope.info
and indispensable:
http://soltechs.net/CustomUI/AllGal.asp
I use the technique of just one ribbon (one XML file) edited with notepad ++ and the invalidate method conjungate with Application.CurrentDb.Properties("ribbonXXX").Value to change the tabs.
See the start of my xml (all I'vd learn so far...)
<customUI
xmlns="http://schemas.microsoft.com/office/2006/01/customui"
onLoad="XXX_onLoad">
<commands >
<command
enabled="false"
idMso="ApplicationOptionsDialog"/>
<command
enabled="false"
idMso="Help"/>
</commands >
<ribbon startFromScratch="true" >
<officeMenu>
<button idMso="FileOpenDatabase" visible="false" />
<button idMso="FileCloseDatabase" visible="false" />
<button idMso="FileNewDatabase" visible="false" />
<splitButton idMso="FileSaveAsMenuAccess" visible="false" />
</officeMenu>
<qat>
</qat>
<tabs >

<tab
id="tb_XXX"
getLabel="CB_getLabel" getVisible="CB_getVisible">
<group
id="gp_FICHEIROS_XXX"
getLabel="CB_getLabel">
<button
id="btn_CRIAR_FICHEIRO_XXX"
getEnabled="CB_getEnabled" getImage="CB_getImage" getLabel="CB_getLabel"
getScreentip="CB_getScreentip" size="large" getSupertip="CB_getSupertip" onAction="CB_onAction"/>
</group >
</tab >
</tabs >
</ribbon >
</customUI >
then I have those subs CB_getEnabled, CB_getImage, CB_getScreentip in a module call AllCallbacks...
Read this just like an example or hints, not the best way to go.
HTH
João

Since upgrading to 5.1, my oncreen keyboard does not appear when it needs to

since i have done the upgrade, my on-screen keyboard does not appear when it needs to. I keep having to restart my system to make it happen.... Is there a special way to display the keyboard manually, or should it be automatic?

Hellow keith5000 ,
regarding your issue lets see what we can do to solve this issue.
- have you tried safe boot
safe boot = starting up the mac with the SHIFT- button.
- when entering safe mode you will be able to enter and quick change some settings
now next question do the unwanted aplications still load in safe mode , if so
go to the Apple icon -> System preferences -> user & groups -> login items (top right on the screen from user & groups window) now at login items u can close any unwanted aplications by deleting them or unmarking them
- unwanted aplications will now disapear when starting up your mac os x system
- next issue should be your authentication , this will be a bit more tricky , lets see
same category user & groups and u will see your admin account try seeing if u have enabled the admin account right click on your admin account to see information about it and compare it if your info is correct , next see if you have authorized your admin account to write & read.
if these still don't work , make a test account to see if this problem is user wide or system wide.

HT3964 When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.

When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.
If i backspace everything and start typing again in the same area, it will work properly the second time.
I am using a ~7 month old macbook air with mavericks.
Any tips to get rid of this issue would be greatly appreciated.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(awk '/^D/{print $2; exit}' "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=\* || e=; echo $d ${f%_$d*} ${f##*.} "$e"; done | tail`; Pm "${A[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|Throt|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Some CGM graphics do not appear when FrameMaker files are converted to PDF

CGM files are exported from ISO (Arbortext Isodraw 7.0 CadProcess) files. Then they are imported into Adobe FrameMaker 7.2, where all elements of the illustration are visible and can be printed. The FrameMaker FM file is converted to a PDF file using the Adobe PDF converter function of Frame. When the PDF file is opened by Adobe Acrobat 8,0 Professional, some, but not all of the illustrations in the file exhibit this problem (The callouts and other text may appear, but the lines, curves, etc. do not). The illustration prints the same way it appears on the screen. When exporting the ISO file as a CGM, the following selections are made.
When importing file into Frame, "Import by Reference" is selected.
When creating PDF in Frame, the following selections are made.
Any Suggestions would be greatly appreciated. Thanks very much.

Thanks, Michael.
I will give it a try.
Avox Systems Web Site: http://www.avoxsys.com
AVOX SYSTEMS
AIRCRAFT SYSTEMS
Rick Barusic
Senior Technical Writer
225 Erie Street - Lancaster, NY 14086 - USA
Tel: 716-686-1706
[email protected]
http://www.zodiacaerospace.com
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination, or other use of or
taking any action in reliance upon this information by persons or entities
other than the intended recipient is prohibited. If you received this in
error, please contact the sender and delete the material from any
computer.
From:   MichaelKazlow <[email protected]>
To:     rick barusic <[email protected]>
Date:   11/24/2010 10:32 PM
Subject:        Some CGM graphics do not appear when
FrameMakerfiles are converted to PDF
First you should update to the latest version of Acrobat 8, since you say
you are running Acrobat 8, you should update to 8.2.5. Update your
FrameMaker to 7.2p158. Those two steps might do the trick. If that fails
try using a different settings file. Perhaps High Quality or Press
Quality. I would never use Standard for anything where fidelity is
important.

When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect.

When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect on the phantom playlist that shows up on the PC when I plug in the iPhone to the PC. I cannot manually move songs or playlists from the PC to the iPhone
Help greatly appreciated.

Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this

Some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

I have this identical problem. For a while my group texts didnt show up on my ipad. Then one day they did, maybe everyone in the group started using the same os version or something. Ever since my first reply to the group there have been complaints of multiple threads. I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time) Everyone in the group has deleted the thread, we've all toggled imessage on/off etc. There still hasn't been a solution.
Any help would be appreciated.
Thanks

Since my last firefox update, I have been unable to type an email - the text box does not appear when I press 'reply' , or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] s

Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
== today

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

My Songs in my Ipod Touch 4 is not appearing when I tried to Play it but when i insert to my PC and use Itunes, songs,playlist appears in I tunes.What do I need to do?Can someone help me?Many thanks

My Songs in my Ipod Touch 4 is not appearing when I tried to Play it but when i insert to my PC and use Itunes, songs,playlist appears in I tunes.What do I need to do?Can someone help me?Many thanks

Try:
- Another cable
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist. However, if I search the album name, all the songs show. How do I get the songs to show under songs?

For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist. However, if I search the album name, all the songs show. How do I get the songs to show under songs?

Hi Spam_Valley,
I understand that you are having issues with your music displaying correctly. This may be an issues with the metadata stored within that song, and iTunes interpretation of that info.
We may need to repair this. See the following resources for information:
iTunes 10 for Windows: If song titles don’t appear correctly
http://support.apple.com/kb/PH1468
Fixing Incorrect Song or Album Listings in iTunes
http://support.apple.com/kb/TA24677
Thanks,
Matt M.

Bookmark ribbon not appearing when pushing bookmark icon

Similar Messages

Maybe you are looking for