Bookmarking not working on LMS

I have a course that will not bookmark on the LMS. It works fine on SCORM Cloud. I have over 30 other courses hosted on this LMS and they work fine. The course has no quiz, the learner only has to complete each screen (You can pass or not complete the course so that works fine). The Never send resume data is unchecked and Allow for self paced learning is checked. When I look at the SCORM Report the cmi.entry shows Resume but there is nothing populated in cmi.location. I need some help, Please
Thanks,
Gillian

I did figure out the problem.... at least it worked for us (with no help
from Adobe). I attached the audio to an object on the first slide (a
transparent box), as opposed to on the slide itself, and that fixed the
problem. I still don't understand why the solution works, but the
instructor of a Captivate class I recently took suggested that I give it a
try.
Guess it's worth a try. Hope it works for you.
Julie
Message was edited by: Captiv8r - Removed Trailer containing SPAM bait.

Similar Messages

Self-Paced Learning - Bookmark not working in Captivate 5

I followed the directions of adding a Table of Contents to one of my captivate projects and selecting Self-Paced Learning in order to create a bookmark but this does not work. I have saved it as Adobe Flash 9 and Adobe Flash 10 but I am not getting the message about starting where I left off when either refreshing the browser or exiting and going back in. What am I missing?
Thanks for your time,
Brenda

All slides in the presentation are marked as continue. I have gone
through the first 5 slides and when I refresh the browser or exit out of
Internet Explorer and open the project again it just starts at the
beginning.
Brenda
From:   Lilybiri <[email protected]>
To:     Brenda Dersham <[email protected]>
Date:   01/25/2011 08:33 AM
Subject:        Self-Paced Learning - Bookmark not
working in Captivate 5
Hello Brenda,
How did you check: after uploading to a LMS?
You have to be aware of the fact that a slide will be marked as 'viewed'
only when the playbar has played the whole slide till the end. If you do
pause slides with a click box, button, TEB and attach the action 'Go to
Next slide' or something similar instead of the default action 'Continue'
this will not happen and the slide will not be marked as completed.
Lilybiri

Bookmarks not working in multi-document PDF application

Why are bookmarks not working in multi-document PDF application when uploaded to the web? We created a multi-document PDF application. All bookmarks and links work on our systems. All work on the customer's system. They do not work when uploaded to the customers website. Their IT department says its an issue of relative vs. absolute addressing. We've created applications like this for years without running into this issue. Can't find anything about it in Acrobat Help. Can anyone help or lead me to help? Thx much, Sandy

Have you tried opening the file in your browser to see if the bookmarks are working? To open the file in your browser you need to do this:
1) Launch your favorite browser;
2) File >> Open >> Select your pdf file
See this picture to see what I am talking about. You might need to click on it to magnify it:
Good luck.

Topology map not working in LMS 3.1

Hi,
I recently did a clean installation of LMS 3.1. The topology services is not working returning an error named "Failed to initialize: Java.lang.NumberFormatException: null"in the pop up window.
Any help would be appreciated
with thanks
sathappan

I can't unse this version of java plug-ins because in a screen of Campus
Manager said you need to install java 1.5. I deinstalled all plug-ins of Java of my notebook an then install only plug-ins that LMS 3.1 have jre-1_5_0_15-windows-i586-p_withvbj.exe
Only with this plug-ins, Topology map is working now.
Thanks.

Exit icon on playbar not working in LMS

Hello,
I was wondering why the close icon X on the playbar of a CP6 project does not work when publishing and placing in an LMS? Any ideas?
Thanks kindly
alison

This might help.
http://forums.adobe.com/thread/874798?tstart=540

IBooks bookmarks not working after 1.2 upgrade

I have noticed the bookmarks on my iPad iBooks are not working after upgrading to 1.2 today.
I am unable to bookmark pages when I need to. It only works sporadically.
I have also noticed when closing a book and reopening, the book opens at last bookmarked page instead of last page read.
Please advice about any fix.

Same problem here, Bookmark always worked properly before iOS 5. I too noticed this while reading Steve's biography, ironic??
I have noticed that besides it appearing on previous page, that if I turn to lanscape and chose the bookmark it is appearing on the right of the second page of the two that appears as should be. So I wonder if this is some problem of formating between landscape 2 page view and the single page portrait view?
My two cents but this is sure annoying! I have not seen it jump back like some noticed however, just previous page in portrait view!

IBooks bookmarks not working I'm using ios5, iBooks bookmarks not working I'm using ios5

Hi my bookmarks arno working in iBooks whenever I close it and go back it opens at the last bookmarks tried restarting iPad but no joy

Same problem here, Bookmark always worked properly before iOS 5. I too noticed this while reading Steve's biography, ironic??
I have noticed that besides it appearing on previous page, that if I turn to lanscape and chose the bookmark it is appearing on the right of the second page of the two that appears as should be. So I wonder if this is some problem of formating between landscape 2 page view and the single page portrait view?
My two cents but this is sure annoying! I have not seen it jump back like some noticed however, just previous page in portrait view!

Hyperlinks to bookmarks not working

When I create a hyperlink to a bookmark it works fine when I create it: as soon as the bookmark is chosen from the drop-down menu the link takes me to it. However when I subsequently click the hyperlink (with the 'make all hyperlinks inactive' box unchecked) nothing happens. Hyperlinks to webpages work fine. I'm using iBooks Author version 2.1.3 and Mavericks version 10.9.5. I've scoured the net but no-one else seems to be having this problem so I guess I must be making some elementary blunder. Any help would be much appreciated.

I'm not sure how some of the links in one of my notes were created.
My thinkng is that there are many applications that can make the determination that something that starts with http:// or https:// can be made to behave as a hyperlink
I do know that I did not purposely create a hyperlink and then paste it into my note.
Also, the only time that I receive the Open URL option in the services is when I select text. E.G if i have text in my Note like jguitar.com and I select the text and then choose Notes > Services, the Open URL option appears and the link will open. If I select the word jguitar all by itself/alone, the option doesn't appear, so the application can tell if it is a possible choice for opening a URL.
Something isn't quite adding up......

Javascript-based multi-parameter bookmarks not working in firefox 13

I have a [http://lifehacker.com/240552/firefox-tip--how-to-set-up-multi+parameter-keyword-searches javascript-based multiparameter bookmark]. Think of it like this: use a keyword to call in the search, then put in two parameters (say, zip code and type of forecast) and it goes straight to the page (my zip code, 7-day. or parents' zip code, hourly) in one shot.
It's sometimes stopped working recently, and I think it's been since I upgraded to FF13. By 'not working' i mean I can restore the bookmark;s "location" to what used to work, and then the shortcut works just fine until .... I don't know. Usually closing firefox and reopening it again and then trying to use the bookmark will cause the browser to just sit there with the entire javascript string in the subject bar.

From my observations, it seems that it doesn't work on newly opened tabs, tabs where you didn't visited a single site. After I visited one random site on that tab, and entered the search keyword and parameters, it worked. It also works on the initial start page, because it's about:blank I guess.
(firefox 13.0.1, linux)

Captivate 5 not working with LMS when linking to AICC published file

When we publish and link our Captivate 4 files. Everything works fine. Now that we've upgraded and tried launching the Captivate 5 files. We only get a loading screen. Can someone help us? We provide training for over 10,000 employees and train several departments to use Captivate for our LMS, but now with Captivate 5 not working it brings up a big issue for us.

another HotFix worked for me:
This is with reference to the issue you are facing with AICC courses on LMS.
Please follow the steps mentioned below and let me know if this solves the issue for you.
1.       Close Captivate if already launched.
2.       Navigate to Captivate installed folder ( For Ex : C:\Program Files\Adobe\Adobe Captivate 5)
3.       Navigate to folder “Templates”
4.       Open folder “Publish”
5.       Open folder “AICC”
6.       Rename the HTM file “default.htm” to “default_old.htm”.
7.       Download the zip the file from https://acrobat.com/#d=rZv8-z9C0z4PPMpqjbkZIQ , Unzip the contents and copy the HTM file “default.htm”
8.       Paste it inside “AICC” folder.
9.       Launch Captivate and open the project.
10.   Re-publish the project and upload the content to LMS.
Let me know if this solves the issue.
Thanks,
Ashwin Bharghav B
Adobe Captivate Team
hope it works for you!

Clickbox not working in LMS

I created a clickbox in an eLearning module developed with Captivate 7 -- the clickbox is supposed to open a document at a URL. It worked fine in preview mode within Captivate and when published as an Adobe pdf. When I published the module as a SCORM 1.2 package and uploaded it to my LMS -- the clickbox no longer works. Is there some specific coding or reference I need to add to make this work in my LMS? FYI -- our LMS is SumTotalSystems Learning Maestro.
Thanks.

OK - this a simple link to a website, right, not a .pdf form you downloaded and saved to your computer?
If so, and you've copied and pasted the link from the browser, there's really no reason for this not work, unless the address is blocked by your LMS administrative settings.
Go to https://cloud.scorm.com/sc/guest/SignInForm and sign up for a free SCORM Cloud account. Once you've set up the account, you can publish and upload your project to the cloud and test it. The Cloud is the current standard for SCORM packages - any package that is functional here should (emphasize - should) run on a compliant LMS.
Justenuf

Bookmark not working in BW query report iview in EP?

Dear all
When i was clicking on "bookmark" button in SAP BW Query iview ..nothing is displaying.
do i need to give any properties of that iview. or do i need to do any configs in BW level.
Pl suggest me
rgds
pradeep

Our experience has been that the bookmark button does not work in the EP. If you select bookmark from the context menu it should work fine
Stan

RH9 - Import Word 2010 - Bookmarks not working

We use Technical Communications Suite 3 with Robohelp 9 HTML.
I import a Word 2010 doc (about 400 pages) and generate Microsoft HTML help.
In the Word document we have cross-references to headings and bookmarks. The bookmarks work in Word, they work when I convert the Word Doc to a PDF using Adobe Acrobat X, however when I import the document into Robohelp 9 HTML they do not work.
The cross-references to headings work but the ones to bookmarks end up with href="".
I can edit the html and manually put in the href ="filename#bookmark" and it works but I want it to convert automatically upon import. The booksmarks in the word document read "(see page xyz)", where the xzy is the cross-reference to the bookmark, using a pagenumber field, so that in a printed document the user sees the page number and in the PDF, Word Doc, etc. and hopefully in the chm they can just click on the link.
Any help would be appreciated.
Thanks,
david

Greetings,
Thanks for the comments. At your suggestion, I was able to get it to work in a small project using a 3-4 page Word document. However it still would not work in my larger project. I noticed that in the large project there were bookmarks that did work to a point in the document andintermittent there after. I went into the Word document to the first failure and re-inserted a new bookmark with the same name hoping it would have a positive result. The results were the same.
However when I inserted a bookmark with a different name, RoboHelp9 was able to recognize the bookmark and would convert to a link. I went through the Word document and created new bookmarks for the ones that did not work (a big task indeed). Now I am able to use the Word document as the source rather than having to edit the HTML in RoboHelp. This is good. Now only if I can get the footnotes to behave the same way....
Granted, I don’t know why a set of the original bookmarks were not working when they worked in other format conversions (Acrobat -> pdf, Word->HTML, XPS), but I can move on. Possibly it has something to do with Window 7 x64….
But, thanks for the input; it put me on a workable path.
Thanks again,
David

Add new bookmark not working

Running Firefox 3.6.13 on a Dell Inspiron laptop. Everything works great, except for one catch: I can't add new bookmarks. Pressing Control+D does nothing, clicking add new bookmark does nothing, dragging the tab into the dropdown bookmark menu does nothing. I've tried the entire tree of options on the Bookmarks not saved Troubleshooing page (https://support.mozilla.com/en-US/kb/Bookmarks%20not%20saved) which, among other things, involved resetting my localstore file, disabling all my extensions/themes/add-ons. I also disabled my Norton 360 firewall, which apparently can cause issues, but this didn't seem to solve it. And I have of course done the usual, deleted all cookies/browser cache etc and tried rebooting. Any idea what else I should try?
MAJOR EDIT: Just realized it doesn't work in Safe Mode. What had happened was I tried to bookmark Google (not realizing I already had) and it let me do that, which is the same in normal firefox- pressing Control+D will bring up the expected box, but only on pages I'd previously bookmarked.

Yes, as I said I tried that. I've disable every single one of my add-ons, themes and extensions but it still won't bookmark. EDIT: Does not work, even in Safe Mode. I agree that's weird behavior but the instructions there don't solve it.
For troubleshooting reference though, here's all the extensions/themes I have installed-if any of them have known issues even when disabled:
Adblock Plus
Adblock Plus Pop-Up Addon
Download Statusbar
Flashblock
Greasemonkey
Norton IPS (I'm unable to unistall this due to Norton's crappiness but I leave it perpetually disabled, and as I said in the original post I've made the changes FF recommends for Norton's firewall/firefox settings)
Xmarks
Lavafox V1-Green
Strata40
As far as I know, all add-ons are up to date

Bookmarks not working (locked) when using same Windows Profile on multiple machines

My bookmarks are not working. I am using the same profile folder on two different machines (Desktop and Notebook) as I use the same Windows profile on both machines. The common profile folder is located on a third machine on our company network. Once I connect both machines to the network the bookmarks on one machine become unusuable as the other machine locks the bookmarks file. How can I manually unlock the bookmarks file places.sqlite? Renaming it and restarting FF does not help.

Hi Sir,
Please apply the following Group Policy Setting for user and computer configuration, then to see if the issue persists.
Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits.
- Set time limit for disconnected sessions - 1 minute
Policies\Administrative Templates\Windows Components\ Remote Desktop Services \Remote Desktop Session Host\Session Time Limits.
- Terminate session when time limits are reached - Enabled
Policies \Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Connections
- Restrict Remote Desktop Services users to a single remote session - Enabled
On the Connection broker applied the below user configuration
Policies\Administrative Templates\Windows Components\Terminal Services\ Remote Desktop Services \Session Time Limits.
- Set time limit for logoff of RemoteApp sessions - Immediately
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Bookmarking not working on LMS

Similar Messages

Maybe you are looking for