Bookmarks a red R appears, on the side of rediff, in bookmarks list

1. A red R apears on the side of Rediff in bookmarks list.what does that mean!!
2.SUID file , when disk permissions verified .How to remove that.Does this need any atention.
             Maveriks 10.1
              Mac book pro 13 inch.
               Bye
                    Anand

'''{ Ctrl + b }''' to open the Bookmarks Sidebar. Along long as you don't close it, the Bookmarks Sidebar should stay open and be open when you start Firefox.

Similar Messages

  • One red dot appearing in right side of screen in Xperia z

    I am using Xperia Z, a Very small red dot appearing in right side of screen that displays only in black background
    Please help..

    What thommo meant is it's ( stuck pixel) a pixel that fails to show any other colour than what it's showing you ( red here )
    A dead pixel is dead and it doesn't show any colour.
    Upto 4 stuck / dead pixels are considered normal but above that it is considered as hardware defect.
    In that case you could claim for warranty and have the device repaired or replaced free of cost.
     

  • When I open PS from LR to edit an image, the thumbnail appears in the side bar but the image area is white, PS CC 2014!

    Hi,
    I've just started a subscription for the Photographers package, when I open PS from LR to edit an image, the thumbnail appears in the side bar but the image area is white, I'm sure this is a stupid newbie mistake but I can't for the life of me see what I've done wrong.

    copernicus1952 wrote:
    the thumbnail appears in the side bar but the image area is white
    Are you referring the the multiple thumbnails in ACR side bar?  I don't use LR  but I do use  Photoshop and as far as I know Photoshop has no sidebar with image thumbnails.
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • Ffu in a red background, appearing in the taskbar for a short time, is this Firefox updating?

    Hello,
    sometimes for a very short time three letters: Ffu on a red background appear in the taskbar. Does this have something to do with firefox updating? I just noticed that new symbol next to my other icons and it disappears very quickly.
    Thanks in advance for your answer!
    Sonja

    Its actually ffd your seeing, probably only pops up when you use vlc mediaplayer or another offbrand media player, its just saying theres some sort of error when reading a codec, i actually get it constantly, dont worry tho its not a virus.
    Hope this helped

  • About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it?

    About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it? Thank you very much.

    Where are you importing from – a camera or computer? If you are optimizing at import, make sure the background processes are completed. (Command-9)
    Russ

  • TS3243 My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "

    My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "Media"... What can I do? Help!

    If Disk Utility cannot see your drive it doesn't look good.
    You could try DiskWarrior. It is expensive but can often fix directory structures where DU cannot.
    Replacing the drive is also a strong likelihood. If you don't have a fairly recent backup, then it might be worth buying DiskWarrior
    additonal notes;
    Gray screen appears during startup

  • The up down arrows on the side of my Hotmail email list do not function, nor does clicking the space above and below the slider bar. These functions work in all other cases. It began with Firefox 3.6 upgrade. Firefox version: 3.6 Operating system: Windows

    The up down arrows on the side of my Hotmail email list do not function, nor does clicking the space above and below the slider bar. These functions work in all other cases. It began with Firefox 3.6 upgrade.
    Firefox version: 3.6 Operating system: Windows XP
    == This happened ==
    Every time Firefox opened
    == After upgrade to Firefox 3.6

    See https://bugzilla.mozilla.org/show_bug.cgi?id=511075 - The arrows of the scrollbars don´t work in hotmail
    Should be fixed in the next release Firefox 3.6.4

  • I recently upgraded to 0S 10.6.8 on mab pro and now have pink lines around the desktop borders. A horrible red colour appears in the background of the screen saver, and in parts of Safari and other applications including MS Office. please help

    I recently upgraded my Macbook Pro to SL OS 10.6.8 and now have pink lines around the desktop borders and some menus. There is also a horrible red colour that appears in the background of photobooth and parts of Safari. The screen saver looks like an alien life form with red in the background. There are odd translucent colours in the background of other applications including MS Office. It looks like a horrible psychedilic trip from the 60's. I ran the upgrade again but nothing changed. Can you help?

    Backup your files off the computer (not TimeMachine) and disconnect.
    Hold c boot off the 10.6 disk, under the Utilities menu > Disk Utiltiy > Repair Disk, and Repair Permissions
    (quit and stop if Disk Repair (only) issues a failure and notify us)
    Quit and install 10.6 again, reboot and Software Update again,  this time download it and then run it. Check Software Update until clear.
    c boot off the 10.6 disk and use Disk Utility >Repair Disk again (fixes a bug)
    Reboot and check any installed programs, some may not function who have installed kext files into OS X, those need to be reinstalled.
    You didn't mention if you upgraded from 10.5 or 10.6.7, the above steps are for fixing a 10.6 to 10.6.8
    If you upgraded from 10.5, you should erase the drive in Disk Utility first, then install 10.6 fresh, but then all your programs will have to be reinstalled or updated from original sources.
    Also the 10.6.3 upgrade disk has no free iLife, but you can install 10.5 fresh then upgrade to 10.6.3, then to 10.6.8 and then all new programs and that will give free iLife that came on the factory 10.5 disks.
    You also can use Pacifist to extract iLife from 10.5 disks.

  • I have recently upgraded to mountain lion and I can not get the calendar application to work. I con appears on the side put on calendars. Any suggestions

    I have recently upgrades to Mountain Lion and I can not get the calendar utility to come alive. Icon appears in the tast bar but the application does not launch or appear to be any where else. Any suggestion?

    Did you look in the Applications folder for Calendar? If it is there, remove the item that is in the Dock and replace it by dragging the Calendar application to the Dock.
    If it is not there, did you have iCal located somewhere other than the Applications folder when you upgraded?

  • I followed the instructions I read in a post to shutdown IPad holding the sleep button down until red arrow appeared.  The slide arrow and then restart with the sleep button.  Well, now nothing happens when I press this button to start IPad.

    I have two problems.  The most pressing is that I was following a suggestion to restart my IPad by turning off, sliding red arrow, wait for Apple symbol.  I now see the apple but alson the little marks that go around when it is working but they are frozen and my home key does not do anything and no icons appear. 

    Thank you so much.  This worked perfectly and you taught me something I didn't know.  The other question I had was that I am in a home with wifi and my ipad connected to the internet without a problem.  We then left for about a week and when I returned to this house I no longer can connect to the internet.  I'm not sure if it is okay to ask you another question or must I post the question.  Also, I am not sure how to five you the 10 points for the correct answer.  I'm very new at this process.   Thank you so much for helping me.

  • How to freeze a scene push it to left and make another scene appear at the side when doing a split s

    Hello everyone,
    I am new to the editing world. I am just trying out various options in Adobe premier pro cs 5.5. Here is the scenario.
    I have four videos. I am able to do a splitscreen using scaling in the effects control. I am also able to crop the black bars using the crop tool. I did those, placed all the four videos one above the other in the timeline, and made all the four to appear onscreen in the form of a grid with two videos aat the tp and two videos at the bottom.
    What I don't know
    When a video is playing in full screen i need that video to be paused and pushed to the left. then the next video should start playing in the size of the remaing screen and it should then be pushed to the left. This should end after the fourth video ends. See the video below to get and idea of what I want.
    http://www.youtube.com/watch?v=QEAPi0Ht2eU
    Please send me a tutorial or video or guideline or anything that would help.
    Thanks,
    VJ

    No tutorial or video, but experiment with motion/position, keyframes and freeze frame.
    Look at https://vimeo.com/1954849 to see what you can do with position, crop, keyframes, etc.

  • After installing FF 6.02 on Windows 7, the icon does not appear on the desktop and the program does not appear in the All Programs menu

    I just received a new laptop running windows 7 home premium and wanted to install Firefox on it. I tried to install the most recent version. When i installed 6.0.2, the icon did not appear on my desktop (it was a hidden file in my desktop folder) and the program group does not appear in the start menu's All Programs list. The program *does* run though, at least it did a few times. This happened whether i installed as administrator or not. Installing firefox 3.6.22, though, DID create the program group and desktop icon, and upgrading from there removed them again. installing other programs (e.g. vlc, trillian, etc.) did not cause this behavior. I also tried this both with and without McAfee's realtime protection running.

    Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

  • When i plug my iphone into itunes now its not showing up on the side what do i do?

    When i plug my iphone into intunes its not appearing on the side anymore so i cant do anything what do i do?

    To clarify, I meant to say, when I plug my phone into my computer and connect to ITunes.

  • Aspect ratio: 4:3 material being exported with black bars (on the sides!)

    Hi all
    I'm fairly new to using FinalCut Express: previously I've used other non-linear video editors on Windows.
    I'm having a bit of a weird problem: I've got a sequence which was shot entirely in 4:3 (PAL). However, when I try to export that to a QuickTime movie it appears squashed from either side — black bars appear at the sides of the frame and everyone looks very tall and thin. The frame itself is still 4:3 but everything is being squashed to fit in the bars.
    I've fiddled with as many settings as are immediately obvious to me to see if I can rectify this, but so far no banana: the sequence is about 90 minutes long and takes about 30 minutes to render each time when exporting.
    Has anyone got any ideas what to do about this? I've been trying to do some research into how FCP/FCE handle different aspect ratios, and it seems to be a very complicated topic. In fact, in the same project I've got a sequence which contains almost entirely 16:9 anamorphic material. Ideally I'd like this to be output in a 16:9 frame with the few 4:3 clips appearing with bars on the side. However, it's only being output as 4:3 where the 4:3 clips appear full-frame and the 16:9 clips have bars at top and bottom...
    Hope someone can help!
    Mac Pro: 3GHz, 6GB RAM, X1900XT, BT, AirPort   Mac OS X (10.4.8)  

    Tom, thanks for the reply.
    Everything looks absolutely fine when played back in FCE; it's only when exporting to QuickTime that my problems start. The point is that this 4:3 sequence isn't being output into a 16:9 frame as a pillarbox: what's actually happening is that it's being put into a 4:3 frame with bars, with the result that the content is in fact being squeezed (it looks wrong).
    How can you modify the aspect-ratio settings for a given sequence? I've looked through all the obvious sequence properties settings but have never found anything.
    I'll just reiterate — it plays back fine within the viewer; only when output does it all go awry.
    Richard

  • Previous Messages are highlighted with a line on the side

    I have inadvertently changed the way a message is viewed when opened. A line now appears on the side of each previous message. I must have set this feature by mistyping and hitting a key board short cut. However I cannot find a way to revert to a view without the lines.
    Mail help does not address this feature. Can anyone advise please?
    Graham
    iMac 20" (2006)   Mac OS X (10.4.8)  

    No
    It's the 1st version of Pages I've had on my computer.
    Can't delete them as they scroll through them at a rapid pace. The longer I've had the problem the more blank pages it scrolls through.

Maybe you are looking for

  • Mid-2009 MBP wouldn't wake. Report inside.

    Hi all, This isn't the first time this has happened, but it has been a long time since the first time. A little about my MBP: Snow Leopard 10.6.8 3.06GHz Intel Core 2 Duo 6GB 1067 MHz DDR3 2GB Apple RAM/4GB Kingston RAM (other Kingston RAM chip teste

  • BPEL Server can not start after jazn default realm has been modified

    Hi, everyone: In order to customize my user task assigneeGroup, I set up a new realm in the jazn-data.xml using the shell (java -jar jazn.jar -shell). I tried to modify the jazn.xml file in %OraBPELPM%\integration\orabpel\system\appserver\oc4j\j2ee\h

  • Class file is referencing a type outside the classpath???

    Hi All, I'm developing a EJB project in NWDS. I'm getthing the below syntax error. This compilation unit indirectly references the missing type com.sap.exception.BaseException (typically some required class file is referencing a type outside the clas

  • OIM Scheduled tasks stop running

    Hi All, for some reason scheduled tasks are not running even after trying to force it manually any ideas would be helpful Thanx Fred

  • Use Non Class VIs within Class

    I suppose this is a theory of OOP question. Say I have 2 classes, 1 is used to set the voltage on a power supply, and another is used to update a user interface.  They are not really related at all in that there is no common parent class and there is