Bookmarks don't sync after upgrade to Tiger :-(

I have 3 computers synced to the same .Mac account.
Until this week everything has worked perfectly. This week I upgraded my powerbook to Tiger (already upgraded my iMac and a DualG5 desktop).
With the upgrade of my powerbook,
(1) the name that iSync associated with the powerbook changed (don't know why), which produced a duplicate entry for iSync.
(2) multible "bookmarks bar" and "bookmarks menu" items showed up on each machine's bookmarks. The new folders were empty (and I deleted them on each machine).
(3) After the Tiger upgrade, bookmark syncing remained enabled in powerbook's iSync pref pane, but not in Safari's preferences. After copying the bookmarks.plist from a good machine and rebooting, this problem disappeared (I don't know if either of these actions resulted in correcting Safari's preferences).
(4) my powerbook no longer sync's its bookmarks ... in fact, I've not been able to verify that any of my computers can still sync their bookmarks. The bookmarks I see on .Mac appear to be an older version of my bookmarks and no longer correspond to those on any computer
Any ideas?
TIA

update on my troubles ...
I reset my iSync bookmarks data on .Mac from the <Advanced> tab of the iSync pref pane using data from a good computer.
I then pointed Safari to .Mac to view my bookmarks. I was prompted with 3 options (don't recall the detail) and selected the 1st option which replaced the .Mac bookmarks with those within Safari (which should have been the same at this point)
Now my .Mac account has the correct bookmarks ...
Next, I initiated a sync of my powerbook. I was notified that my .Mac bookmarks had been reset and asked if I wanted to replace those on the powerbook with those on .Mac, which is what I did.
... and now everything appears to be working again!
Regards

Similar Messages

Bookmarks don't work after upgrading to Firefox 5.0

My bookmarks don't work after upgrading to Firefox 5.o. Please help! The icons no longer show and instead there is a blank paper with the top right corner folded. I can't even bookmark new pages! I tried reinstalling the program and that didn't work. Please help!

Your bookmarks file may be corrupt. Navigate to /[UserName]/AppData/Local/Mozilla/Firefox/Profiles/[profile_name]. Either rename places.sqlite to places.sqlite.corrupt (or whatever) in case this isn't the problem, or delete places.sqlite. Start/Restart Firefox. The icons for sites that have a favicon should return after you visit each site.

Bookmarks and reading lists don't work after upgrading to ios6 on ipad

Bookmarks and reading lists don't work after upgrading to ios6 on ipad

Your bookmarks file may be corrupt. Navigate to /[UserName]/AppData/Local/Mozilla/Firefox/Profiles/[profile_name]. Either rename places.sqlite to places.sqlite.corrupt (or whatever) in case this isn't the problem, or delete places.sqlite. Start/Restart Firefox. The icons for sites that have a favicon should return after you visit each site.

Lost messages after upgrade to Tiger

After upgrading to Tiger I seem to have lost the messages in my main Inbox that were sent to my main email address. All the other mailboxes where I filtered mail to seem intact.
I backed up data to a separate firewire drive before I installed the new OS, including the Mail folder in Library... I can see the other mailboxes, but have not been able to locate the main Inbox or find and import the mail that is missing. Did Panther store it somewhere else??
I've looked at your support topics, but I'm still baffled.
G5 Mac OS X (10.4.8)

The conversion from Mail 1.x to Mail 2.x is broken. Take a look at the following thread to better understand the problem:
Help! "You need to take this account online in order to download it."
In particular, you may want to take a look at the following article (also referenced in that thread) to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
Overstuffed mailbox is unexpectedly empty
More specifically, if this is a POP account, the following procedure should allow you to fix the Inbox problems:
1. Quit Mail.
2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
6. Move any strangely-named Messages-XXXXXX folder to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
8. Open Mail.
9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop. Do with the imported mail whatever you wish. You may move to the account’s Inbox the messages that Mail failed to convert properly, and delete those that did get through and, hence, are duplicates now.
The following collection of AppleScripts has a Remove Duplicates script that can be useful for removing duplicate messages:
http://homepage.mac.com/aamann/Mail_Scripts.html
If all is well and you’re not missing anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Ask for any clarifications or if you need further assistance.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

IPhoto library gone after upgrade to Tiger

My iPhoto library was empty after upgrading to Tiger. I am on my 4th digital camera, so you can imagine how many photos I can no longer find. What is worse, and I don't think there is anything worse, I can no longer see photos of my child who is deceased. I want my photos back!! Can anyone help. The "computer nerd" company that did our upgrade is of no help at all. They talk to me as if I knew anything about computers and I know nothing. Please help me.
Elizabeth,
Ray'sMom

Phil
Three separate issues then:
1. The files which are corrupt or a file format that Preview doesn't recognize
Some things to try:
Change the file suffix to .jpg (i.e lowercase) or .jpeg and see if that helps.
Download Graphic Coverter and try open them with it. Graphic Converter is a image editor, and frankly, if it won't open them, I doubt anything will.
2. "Unreadable Files: 1
The following could not be imported. (The file is in the iPhoto Library folder.)"?
iPhoto will not import files from the iPhoto Library Folder - it's a simple protection against duplication.
3. iPhoto fails to display any of these images at all.
Do you get a blank square in the iPhoto Window? What happens when you click on a pic to edit it in the iPhoto Window? Do you get a ? or a !
The ! or ? turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents. The most common cause of this is User Activity in the iPhoto Library Folder. Have you altered, moved or renamed anything in the iPhoto Library Folder?
If you haven't, then try rebuilding the database. Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild. Choose the top three options.
If you want to start over:
To create and populate a new library:
Note this will give you a working library with the same film rolls and pictures as before, however, you will lose your albums, keywords, books, calendars etc.
Move the iPhoto Library Folder to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library Folder on your desktop and find the Originals folder. From the Originals folder drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

My iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3

y iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3 - any solutions out there?

Thanks - got stuck with the upgrade to 10.6.8, but Apple Support was able to navigate me through that, the date settings caused a problem here.

Genius gamepad don't work after upgrade to Yosemite.

My game Genius Maxfire 3 gamepad don't work after upgrade to Yosemite, please help.
Juan.

Try deleting the previews directory and then rebuilding the standard previews.

My phone wont sync after upgrade to 5.0.1 WHY?

my phone wont sync after upgrade to 5.0.1 WHY?

Hi, I'm having the same problem as crystalfromsaline.
The handset advised me to upgrade 5.0.1 so I did and now it wont sync to my mac?? It's detected in iPhoto but not as all in iTunes. The handset still works fine.
I'm currently using Snow Leopard 10.6.3 and have the latest version of itunes.
Hope this is enough info, any help you could offer would be much appreciated.

ICal alarms not working after upgrade to Tiger

After upgrading to Tiger my iCal (v 2.0.2) alarms were not working. The solution that worked for me was to go to the preferences file in my home folder and remove "com.apple.iCal.alarmsCache.plist" and "com.apple.iCal.AlarmScheduler.plist". I removed both at the same time but you may want to try one at a time. Quit mail and then reopen it. After of couple of tests with a message alarm and an email alarm it seems to have solved the problem.

Vicki,
Force Quit iCal, from the  menu by choosing >Force Quit...>iCal.
Paste this text ~/Library into the Finder Menu>Go>Go to Folder...window and select "Go." This will open the Users Library Folder.
Then open the Calendars Folder which is in that Library Folder, and move any any files with "Cache" listed in the name field to your Desktop.
Next open the Preferences Folder in that same Library Folder and move the com.apple.iCal.plist file to the Desktop.
Log out/in or restart and open iCal.

Firefox browser and iPhone Firefox Home don't sync after 24 hours

Firefox browser for Mac and Firefox home for iPhone 3GS don't sync after 24 hours.
== This happened ==
Not sure how often
== Since yesterday

Firefox Home support is over at https://support.mozilla.com/en-US/forum/6

After upgrading from tiger to snow leopard i get you need to restart computer when i get done with something

After upgrading my operating system, after being on different pages for sometime, i get a shaded that comes down and says i need to restart my computer then tells me to send in error report when it reboots....what do i do

This is called a Kernel panic.
See here for possible solutions:
http://support.apple.com/kb/TS3742
Did you do anything else apart from ungrading OS?
Did you add memory?
Bad or not well seated memory modules are often a cause of kernel panic

Optical drive problems after upgrade to Tiger 10.4.10

I've just had my machine updated to Tiger 10.4.10 after having two new hard drives installed after a hard drive failure. I'm now having issues with burning data for backup purposes.
I can't burn anything with Mac OS Disc Burner utility, it doesn't seem to recognize blank disc's DVD's or CD's. It keeps telling me to load a disc when one is already in the drive.
System profiler recognizes CD-R's & DVD-R's when they are in the optical drive
I can burn with Toast Titanium ver 6.0.3 DVD's & CD's. The burned CD's will mount. The burned DVD's will not mount.
I have checked the burned DVD's in the optical drive of my iBook G4 Mac OS 10.3.9 and they mount on it fine.
Movie DVD's will mount & play. Software DVD's will mount and load applications.
I have cleaned the drive with a cleaning disc.
The Optical Drive was working fine before the upgrade, so what is the problem?
I can only assume two problems now!
1.) the optical drive has a physical malfunction
2.) there is a software issue between Tiger 10.4.10 & this optical drive (this is my favorite at the moment)
The upgrade was done by an Apple Authorised Service Provider they say there are no issues with Tiger & the optical drive.
So any ideas or help would be much appreciated.
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 2
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 900 MHz
Boot ROM Version: 5.1.5f0
PIONEER DVD-RW DVR-106D:
Model: PIONEER DVD-RW DVR-106D
Revision: A606
Serial Number: DBDL909690WL
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
PIONEER DVD-RW DVR-106D:
Firmware Revision: A606
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No

I'm having a similar problem. I bought my G5 with Panther OS on it a few years ago. The DVD drive functioned perfectly back then. Then I upgraded to Tiger this past year which caused the DVD drive to open later..that is, I'd have to hold down the eject button for a good 2 or 3 seconds before it would open or close. Previously it responded instantly. Now what happens more and more is it can't read DVD-ROM disks that it has burned. My imac G4 with Jaguar has no trouble reading the disks but Tiger 10.4.9 and 10.4.10 simply refuse to mount DVD ROM disks that it burned.
I'm trying to make a duplicate DVD of the offending disk on my single-processor G4 and then put THAT disk into the G5 so it can read the info. Hopefully that will be my work-around.
It's got to be a software issue and I keep hoping the Apple wiz kids will put out an update to remedy this. Something's fishy with the DVD drive programming.

Problem with mail after upgrading to tiger...

When I upgraded the OS in my PowerBook, all the mail messages in my in-box disappeared. Now, the only thing that shows up in each mail is the following, "The message from [Antonio john Doe <[email protected]>] concerning “Stuff” has not been downloaded from the server. You need to take this account online in order to download it."
The e-mail is also gone from the earthlink
server because they wipe all mail out after a few days. Is there a
way to recover the messages?
Powermac G5 dual 1.8 Mac OS X (10.4.6) 1.3 Gb ram

The conversion from Mail 1.x to Mail 2.x is broken. Take a look at the following thread to better understand the problem:
Help! "You need to take this account online in order to download it."
More specifically, if this is a POP account, the following procedure should allow you to fix the Inbox problem. A similar procedure should allow you to fix other mailboxes that might also be affected:
1. Quit Mail if it’s running.
2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
6. Move any strangely-named Messages-T0x... folders to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
8. Open Mail.
9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop.
As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful for that.
Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
You may want to take a look at the following article (also referenced in the thread I mentioned at the beginning of this post) to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
Overstuffed mailbox is unexpectedly empty
Ask for any clarifications or if you need further assistance.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

After upgrading to Tiger, freeze after waking from sleep on PM G4

My experience with Tiger in the past week as not been great. The reason I upgraded was to get iSync 2.1, so that my Moto E815 phone could be sync'd with my OSX AddresBook and iCal. This wasn't possible with the latest version of Panther.
So, I upgraded to Tiger 10.4.3, and now my G4 freezes immediately after waking from sleep. After pressing the 'return' key to wake the computer, the G4 sends a signal to wake the monitor, but on top of the screen saver is a black text box which states there was a problem I must press (and hold) the power button to restart the Mac. It's written in four languages.
When I installed Tiger, I used the 'archive' option.
My computer is a bit of a FrankenMac: Originally a G4/350 with AGP, upgraded with a Sonnet 1GHz G4 processor card, 1.12GB RAM, a 160GB HDD, an nVidia GeForce3 64MB AGP video card, Samsung DVD/CR-RW drive (Patchburn3) and a Belkin PCI card with 2 additional Firewire ports and 3 additional USB 2.0 ports. When I performed the upgrade, I had the keyboard and mouse plugged into the case USB 1.1 ports, a Logitech Notebook Pro USB camera plugged into the other case USB 1.1 port, and a D-Link BT120 USB->BT adapter plugged into one of the three USB 2.0 ports on the Belkin PCI card.
When I check the Console logs after the rebooting, I see a kernal panic in the panic.log. Apple has received this a number of times from me in the past week as I keep sending them 'talkback' logs after the fact.
I also see an error in the system.log which may reveal what is going on:
Nov 20 18:54:40 localhost kernel[0]: standard
timeslicing quantum is 10000 us
Nov 20 18:54:40 localhost mDNSResponder-107.3 (Aug 22
2005 11: 46:54)[44]: starting
Nov 20 18:54:40 localhost kernel[0]:
vmpagebootstrap: 284852 free pages
Nov 20 18:54:40 localhost kernel[0]:
migtable_maxdispl = 70
Nov 20 18:54:40 localhost kernel[0]: 71 prelinked
modules
Nov 20 18:54:40 localhost kernel[0]: Copyright (c)
1982, 1986, 1989, 1991, 1993
Nov 20 18:54:40 localhost kernel[0]: The Regents of
the University of California. All rights reserved.
Nov 20 18:54:40 localhost kernel[0]: using 2949 buffer
headers and 2949 cluster IO buffer headers
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270 Bus
9 already taken
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270
AppleUSBOHCI[0x2057000]::start OHCI controller will be
unloaded across sleep
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
TI ID 8019 built-in now active, GUID 000a27ff
feb38fe6; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
VendorID 1033 ID cd PCI now active, GUID 0000303c
0008c32e; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: Security auditing
service present
Nov 20 18:54:40 localhost kernel[0]: BSM auditing
present
Nov 20 18:54:40 localhost kernel[0]: disabled
Nov 20 18:54:40 localhost kernel[0]: rooting via
boot-uuid from /chosen:
474ACE52-2523-3EE7-9C54-DDC3734C7922
Nov 20 18:54:40 localhost kernel[0]: Waiting on <dict
ID="0"><key>IOProviderClass</key><string
ID="1">IOResources</string><key>IOResourceMatch</key><string
ID="2">boot-uuid-media</string></dict>
Nov 20 18:54:40 localhost kernel[0]: Got boot device =
IOService:/Core99PE/pci@f2000000/AppleMacRiscPCI/pci-bridge@D/IOPCI2PCIBridge/ma c-io@7/AppleKeyLargo/ata-4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDevice/IOBlockStorageDriver/HDS722516VLAT80
Media/IOApplePartitionScheme/AppleHFS_Untitled2@10
Nov 20 18:54:40 localhost kernel[0]: BSD root:
disk0s10, major 14, minor 10
Nov 20 18:54:40 localhost kernel[0]: jnl:
replay_journal: from: 2668032 to: 12288 (joffset
0xe04000)
Nov 20 18:54:40 localhost kernel[0]: Jettisoning
kernel linker.
Nov 20 18:54:40 localhost kernel[0]: Resetting
IOCatalogue.
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 2
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: NVDANV20HAL
loaded and registered.
Nov 20 18:54:40 localhost kernel[0]: CHUDProf.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: CHUDUtils.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: IPv6 packet
filtering initialized, default to accept, logging
disabled
Nov 20 18:54:41 localhost kernel[0]: UniNEnet:
Ethernet address 00:0a:27:b3:8f:e6
Nov 20 18:54:41 localhost launchd: Server 292f in
bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited
abnormally: Hangup
Nov 20 18:54:41 localhost lookupd[56]: lookupd
(version 365) starting - Sun Nov 20 18:54:41 2005
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk0s10 hfs
474ACE52-2523-3EE7-9C54-DDC3734C7922 Onyx
Nov 20 18:54:41 localhost kernel[0]: jnl:
replay_journal: from: 1374208 to: 1564160 (joffset
0x624000)
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk1s10 hfs
947C0EA5-F775-330F-82D9-D2F8B65F7357 Backup
/Volumes/Backup
Nov 20 18:54:43 localhost kernel[0]: NVDA,NVMac: vram
[98000000:08000000]
Nov 20 18:54:43 localhost
/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow:
Login Window Application Started
Nov 20 18:54:43 localhost loginwindow[72]: Login
Window Started Security Agent
Nov 20 18:54:44 localhost mDNSResponder: Adding browse
domain local.
Nov 20 18:54:45 localhost kernel[0]:
UniNEnet::monitorLinkStatus - Link is up at 100 Mbps -
Full Duplex
Nov 20 18:54:45 Jason-Radtkes-Computer configd[34]:
setting hostname to "Jason-Radtkes-Computer.local"
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
executing
/System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-netw ork
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
posting notification
com.apple.system.config.network_change
Nov 20 18:54:47 Jason-Radtkes-Computer lookupd[82]:
lookupd (version 365) starting - Sun Nov 20 18:54:47
2005
Nov 20 18:54:49 Jason-Radtkes-Computer configd[34]:
target=enable-network: disabled
I suspect the problem where the USB devices are started, because I had that Bluetooth adapter plugged in at the time of the upgrade. I'm speaking of the lines in the log which start with 'USBF'. The keyboard and mouse are useless when the black screen shows up after waking from sleep.
I've tried some of the suggestions I've found for the iBook 'wake from sleep' postings on macfixit.com and here - resetting NVRAM and removing a few of the .plist files. This didn't seem to help.
I would greatly appreciate help in resolving this issue. I've been a Mac owner since the original Macintosh (it's still in my house) and am frustrated that this is the first problem I've encountered.
Thanks in advance for your help.

Thanks. In fact I had bought a new keyboard and mouse (Macally) and sure enough, if I unplug it before it reboots, the CD drive door stays closed and I can boot from a CD! I did not try any of the other stuff. Is there any way to get it to stop this? Why does a USB peripheral cause the CD to eject anyway? Would love to know!
Ron

Bookmarks don't sync after upgrade to Tiger :-(

Similar Messages

Maybe you are looking for