Bookmarks in side panel closed unable to re-open
somehow my bookmarks in the side panel disappeared. There are absolutely no options to re-acquire them.
Hi Gallienus,
Try hitting ''CTRL + B''. This will display your bookmarks in the sidebar temporarily. If you want to permanently put your bookmarks in the sidebar, you should take a look at [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars this article on customizing the toolbar]. It will show you how you can add new toolbar buttons. There is a bookmark icon available that will open your bookmarks in the sidebar. It looks similar to the other bookmark icon, but it has as small bar on the left side.
Hopefully this helps!
Similar Messages
-
Can you launch a doc in Pages 5 with the formal panel closed?
Driving me nuts, there's a number of Pages 5 documents that don't need to have anything but text edited and I don't need that side format box/panel to be open, which in smaller screens really uses up a lot of space.
Is there a way to open a document with that darn side panel closed?Actually I have just tested Pages 5 and yes you can turn off the side panel by clicking on the Format icon (Paintbrush) top right.
However since 95% of all your styling is only visible there, you will be turning it on and off a lot.
You used to be able to show and hide the Inspectors with a keyboard shortcut in Pages '09, so that will still be your best option on your laptop.
You raise a very valid point about the actual useability of the new UI.
I disagree with the new User Interface for other reasons, principally it does such a poor job of showing the correct settings for users as needed, this just makes it one more reason to give it an F.
Peter -
InDesign 5.5 Side Panels missing content
After force quitting my program a few times due to unresponsiveness, it seems to have lost all of my preferences along with the side panel content. I can open the side panels but almost all of them are blank. I can see my layers, links, and pages but I cannot see any colors, swatches, text wrap, or alignment.
I have played with a couple of things to try and get it back to how I like it but no results.
Is this one of those super easy fixes that I am totally overlooking?
Help please!! I work in this program on a daily basis and have huge projects that are time sensitive and need to be completed.See Replace Your Preferences
-
Stupidest problem ever - side panel latch won't open!
has anyone had this problem?
the other day, I installed some new RAM and had no problem opening the side panel.
today, I want to put in some new hard drives - and the side panel latch just doesn't open!
I have no idea what could be causing this - it's just not opening. what could be inside that's preventing the latch from opening?
help!
wW,
There are 4 latches located just above the hard drive bays and they fit into a channel located on the side panel. You may have installed the side panel on a very slight angle by not centering the bottom lip in in its matching slot, causing the latches to bind. The other explanation is the channel has loosened on the side panel.
I would lay the Mac on its side and slightly press on the side panel while opening the latch. If that doesn't work, you can attempt to shift the side panel in its slot. This can be done using a piece of wood and a hammer. Be careful though, you don't want to damage the Mac Pro's exterior or cause any internal damage.
Keith
Message was edited by: Keith Parobek -
*Help, can't figure out how to reopen closed side panels!!!
I closed the "layer" side panel and can't figure out how to reopen it. Pleaes help, I have CS3.
I also find it useful to do a Workspace Save, when I have things setup as I like. You can access it from the same drop-down on the Toolbar, Window>Workspace>Save_As. I have a half-dozen custom Workspaces, that I use. This can be a real time-saver, when Panels get closed, moved off-screen, or similar.
In versions prior to CS4, the Workspace is saved with the Project. Do not know if that has changed.
Good luck,
Hunt -
Unable to open side panel in DMS
Unable to open side panel in DIR Error: "Error on Page" and I am using IE8 for NWBC.
Is IE 8 even supported for the scenario? It is really old...
espen -
Opening bookmarks NOT TO SIDE PANEL
I just got a new computer and downloaded Firefox. I used to have all my bookmarks in my bookmark toolbar at the top, and when I opened one of them, it was opened as a new tab. OK, but it opened NOT as a side window, but as a whole window. I could then open any tab that was open as they were indicated in a toolbar at top, but there would NOT be this annoying split screen. Now I cannot find settings to change it back. I find it extremely annoying that a new tab opens off to the left side so I have to scroll to right to see the entire page.
You will need to locate the bookmark that is opening the site in the sidebar (left) using the Library window (Bookmarks > Show All Bookmarks) or the Bookmarks Sidebar (CTRL+B to open or close the Bookmarks Sidebar). Then right-click on that bookmark, choose Properties, at the bottom of the Properties screen un-check "Load this bookmark in the sidebar", then click Save.
When you click on a link on a web page to add a bookmark for that page, it often saves that bookmark with the sidebar option checked, so avoid doing that and add the bookmark for that page in the usual way. See: [[Bookmarks]]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
When trying to save a file to the computer I use for printing, the entire "Shared" section does NOT show up on my side panel. If I open up a Finder window, they are there and I have no issues accessing them. I just can't get them to appear to select them inside of Illustrator.
Understood, but that's not the issue here, the "shared" section disappears from open/save dialog boxes within the Adobe applications.
I've been testing this with Mavericks and so far have been unable to reproduce the issue, I think this is a Yosemite exclusive issue.
61446 - I'll let you know the final results of our testing, but it looks like downgrading to Mavericks may be the solution here. -
Bridge not Remembering Last Position for Side Panels?
The side panels in Bridge CS6 will not stay to the last set position when I close? I have thought that this was a case of bridge not closing properly on Windows (7) shutdown. I then tried setting the side panels to where I would like them and went File > Exit to close bridge properly and when I launch it still does not have the correct position. Does it not remember this and how do I change this?
Here is a screenshot of what I am calling the side panels: http://screencast.com/t/QDZGNCPp (The red arrows are pointing to the side panels.)If you have start Bridge at launch enabled you closing proceedure should work.
Have you tried setting your panels where you want then saving this as a workspace? -
Anyone understand this strange LR3 side panel behaviour?
In the last couple of days my laptop has developed a piece of strange behaviour related to the side panels. I'm pretty sure it didn't start when I installed the LR3.5 update, but this may have been a contributing factor.
Until recently I always worked in "solo" mode. A couple of days ago, LR's behaviour changed so that opening or closing any of the side panels would cause the relevant side (left or right) to become totally unresponsive. The rest of the program continued to work fine, and the equivalent side panel in other modules continued to work properly until a panel was opened or closed.
In an attempt to understand what was going on, I turned "solo" mode off. This led to some very interesting behaviour indeed:
If I used the triangle to open or close a side panel, everything worked exactly as expected.
If I clicked on the dark grey bar to open or close a side panel, it became stuck in one of the two states.
When stuck in "open" state, clicking in the grey area simply caused the panel to close and then re-open, very rapidly.
When stuck in "closed" state, something similar happened in that the panel opened and then re-closed, very rapidly.
When in "stuck" state, clicking on the triangle had no effect on the displayed panel but it seemed to toggle the internal state between opened and closed.
Once toggled, clicking on the grey bar opened the panel where it used to close it, and vice versa.
When collapsed, the panel displays as pale grey rather than the more usual dark grey. See below for an illustration.
I have a desktop machine as well which doesn't show the behaviour. I've tried reinstalling LR3.5, to no avail. My guess is that we're dealing with inconsistent panel state information in the "preferences" file, but I don't know for sure.
If anyone knows what is happening, or (more importantly) how to stop it happening, I'd be enormously grateful for some help.
Many thanks in advance,
Ian Wilson
Cambridge UKFurther investigation yielded yet more interesting behaviour - and, it turns out, a pointer to the problem.
I tried renaming the old "preferences" file, causing LR to create a new one. The problem was unchanged, apart from losing my registration information...
I tried creating a new, virgin catalogue. This behaved normally, so I thought I was onto something!
I tried importing a folder of pictures into the new catalogue. The old behaviour returned.
I created a new virgin catalogue, which reverted to good behaviour. I then imported one picture into the catalogue. Behaviour BAD.
I then tried removing the single picture from the catalogue and restarted LR. Behaviour GOOD!
Conclusion: Lightroom works just fine for me providing I never put any pictures into my catalogue!!
This got me thinking that, perhaps, the issue was related to the rendering of images. I tried installing the latest nVidia drivers for my laptop, but this had no effect whatsoever. Given the issue clearly related to how images are rendered, however, I wondered whether the problem could relate to colour profiles. BINGO!! I'd recently upgraded my "i1xtreme" to X-Rite's new "i1publish". The profiles created with the latest software are ".icm" rather than ".icc", although this shouldn't matter (and doesn't matter to PS and Bridge). It seems to matter to LR, however, as reverting to my earlier ".icc" profiles made everything work again just fine.
There is obviously a bug somewhere, but it's not clear whether I should be chasing Adobe or X-Rite. I'd welcome any comments or advice...
Many thanks for the suggestions,
Ian. -
Navigate in long docs using headlines in side panel
I would like to switch from word if it would be possible in Pages to navigate through a long doc clicking headlines in the side panel that then takes you to that place in the doc. Is this possible in Pages??
all the best,
JornTanx for advice Fruhulda, but the bookmark solution works even better for me.
But it should be such an easy thing for apple to make the option between thumbnails and list of defined words/headlines. It would be so much more neat and simple, especially in full screen mode. But... maybe one day.
Another question that I have just posted is if one can make the autosave versions do more frequent updates. Do u know if that is possible? -
Hum disapears if side panel left unlocked, is this ok to leave like this?
Hi Guys,
I have an anoying hum from my MacPro, I have checked all the screws on the side panel and drive sledges are tight. The three rubber spacers at the bottom of the panel are also ok. I have also moved the disks around (I have 3).
If I leave the lock at the back open then the machine is silent. If I lock it with the panel off I get no hum. If I lock it with the panel on I get a hum (and vibration) that is driving me mad.
Do you think its ok to leave it with the lock unlocked?
Thanks for any help
AndyMy macpro did the same. if I closed the sidePanel it started making some humming noise. there are some clip-slots on the inside of the sidepanel. I think that the little hooks that go into the clips when you close it are a little loose so they may start to wibrate against the panel. What I did was to put a little tapestrips into the sidepanel slots. I also put a tape onto the inner face of the sidepanel all around the edges of it. It seams to have solved my humm. You should look at it as a possible cause of the humm. Hope it help you
-
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
The Document Information Panel was unable to load. The document will continue to open ?
I am using Sharepoint 2010; DIP in microsoft word all the while is working fine, not sure why suddenly it came out the following error when save word doc into sharepoint.
ERROR MESSAGE
===========
"The Document Information Panel was unable to load. The document will continue to open.
The form contains schema validation errors.
Content for element 'documentManagement' is incomplete according to the DTD/Schema. "
How to troubleshoot? Recently I added lookup column and a workflow into the library, but I did the same thing in another library which never appear to have any issue on it.The lookup column is creating the problem , you can find powerscript solution to fix this issue , please check this -
Fix through Powershell
http://blogs.msdn.com/b/tehnoonr/archive/2012/05/17/sharepoint-2010-document-information-panel-fails-to-load-when-office-documents-are-opened-in-a-library-that-contains-lookup-columns.aspx
Fix through Code
https://social.msdn.microsoft.com/Forums/office/en-US/2a4d6d10-d1d5-4d6a-a22b-62dfb6b60685/lookup-field-creation-and-document-information-panel?forum=sharepointdevelopmentlegacy
or try this -
https://social.technet.microsoft.com/Forums/office/en-US/2552fbc8-da24-4d2b-84f6-d39c4d58b137/the-document-information-panel-was-unable-to-load-the-document-will-continue-to-open-for-more?forum=sharepointgeneralprevious
1. Open this location- C:\Program
Files\Microsoft Web Designer Tools\Office12\1033\IPEDINTL.DLL
2. copy IPEDINTL.DLL
3. paste it here- C:\Program Files\Microsoft
Office\Office12\1033\IPEDINTL.DLL
4. Close all the applications that are presently
open as well as all the browsers
5. Open the sharepoint site in a new browser
and check the results !!
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful. -
Hi Guys,
I am creating the library using object model with custom content type. When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
Document Information Panel cannot open a new form.
The form contains schema validation errors.
Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
But after saving the document, then meta data is enabled.
Thanks in advance for suggested solutions.
thanks
Santhosh GHi,
For a better troubleshooting, I suggest to do as follows:
1. Please try to update the Location column's schema by following the steps below.
1) Go to Site Settings -> "Site Columns"
2) Click on "Location", after the page is opened. Don't modify any settings, click "OK" to forcibly update the field's schema.
2. Re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
3. Here are some similar links about your issue, please take some time to look at them:
http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
More information:
SharePoint 2010: Creating a Custom Content Type using Visual Studio
http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support
Maybe you are looking for
-
I am trying to download photoshop presets from online but can't seem to figure out how to open them in photoshop. They download sucessfuly and then goes to my download folder on my computer, from there I double click on the file and photoshop opens a
-
IPOD TOUCH NOT RECOGNISED IN ITUNES OR MY COMPUTER
help ! my ipod touch isnt recognised in my computer ,nor in my itunes diagnostic program it says no ipod detcted .on my ipod touch 2nd gen screen it has the itunes symbol and a usb lead symbol.when itunes comes on it says itunes has detected an ipod
-
LR 5.7.1 will not create folders on a network connected Drobo.
LR 5.7.1 on IMac2 (OS 10.9.5) will not create a folder an a Drobo that is USB connected to IMac1 (OS 10.10.2). The two IMacs are ethernet connected through a router. When attempting to create a folder on the Drobo from LR on IMac2 an error message
-
Q: How to create reports with no login required?
I would like to make some reports available to internal people but I dont want/need login security. Is this possible? how?
-
Word works fine, but powerpoint won't open?
Hi, Microsoft word (2008) opens fine, but when I try to open powerpoint it says "it has encountered a problem and must quit." I've tried disk utility, but that didn't work. I do not have the reinstall disk either. Any ideas? Thanks!