Bookmarks in version older than 8 - installed new hard drive - where is the bookmarks file?
installed new hard drive two months ago - just now reinstalling Firefox -- installed new version 8 -- need to know where my old bookmarks would be stored (what file and where)
Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
* here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
* here explain how to restore it
https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
Similar Messages
-
Install new hard drive, restore from Time Machine, File Vault Problems
Hello all,
I spent way too much time on this seemingly simple task, so I thought I would share my experience with others so they can avoid some pitfalls when upgrading a hard drive in a system that uses File Vault 2 encryption. The basic goal here is to replace a drive in a system that has only one drive, and the OS is Mavericks, and then have the new drive encrypted as before.
The problem is that a Time Machine restore onto a new drive will leave that without a Recovery Partition, which is required for File Vault 2 and some other important things. So we need to build a recovery partition. There are possibly several ways to do this.
Here's what worked for me (this is compiled from many sources that I found and already closed the tabs in my browser so I can't list all my sources):
1) Make a full backup to an external hard drive using Time Machine.
2) Go into the App Store and download OS X Mavericks but dont install it (close the window when it pops up asking to continue the install). Do this even if you already have Mavericks. At this point, there will be a folder in your Applications folder called Install OS X Mavericks (or similar).
3) Insert a USB drive that is at least 8 GB and format it using Disk Utility, naming it the default "Untitled".
4) Open a terminal and type
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
5) Wait for this to finish (took me about 30 min). Eject the USB drive and power down.
6) Remove the old hard drive and set it aside. Keep it for a few weeks until you know the new drive is working as expected.
7) Install the new hard drive and insert the USB drive. Hold the option key and press the power button. Choose to boot from the USB installer.
8) Use the disk utility to erase whatever partition shipped with the new drive, replacing it with a Mac OS Extended (Journaled) system. Verify that GUID is the partition type (in Advanced options).
9) Close the disk utility and install Mavericks. This can take a long time. My new drive is an SSD, and it sat at the "1 second remaining" part for about 20 min. Let it reboot (maybe it was 2 times?) and go through the setup until it finishes the install.
10) Boot into the freshly installed OS and open a terminal and type:
diskutil list
11) If there is a partition listed as Apple_Boot Recovery HD (mine was 650 MB), then you now have a recovery partition. If not, then go into the App store and download Mavericks, but don't use the USB this time, choose to do a regular install (or reinstall to be more correct).
12) Now there will be a recovery partition on the new drive and Time Machine will not overwrite it when restoring. Power down the system.
13) Plug in the Time Machine backup drive used in step 1. Press the option key and power on. Choose to boot from the recovery partiton (Mavericks).
14) Choose to restore from Time Machine backup. Wait until it finishes and log into the old familiar account.
15) Start a terminal and verify the recovery partition is still there (type diskutil list and see that the Apple_Boot Recovery HD is there). If it's missing, choose to download Mavericks from the App Store again and run the installation from this one.
16) Once there is a Mavericks recovery partition on the restored data you can simply turn on File Vault from the System Preferences Security section. It will require a reboot and then you login and wait for it to finish.
What a major pain to go through all of this for the sake of upgrading a hard drive. This should not be anywhere near as complicated. I hope this helps others avoid the very time consuming trial and error I went through in developing this procedure.Talked with Apple last night. Everything we did to restore lost images failed to fix the issue. I did have the images still on my camera's SD card so I was not breaking out in a cold sweat.
All Time Machine backups showed the same issue. HOWEVER, I suddenly remembered I also had a SuperDuper backup and voila. The images were there.
Moral of the story: you can't ever be too rich or have too many backups (I also have an offsite backup). -
Windows 7 Enterprise is not genuine after installing new hard-drive and cloning the old one
I retired from my job as a university professor two years ago, and they let me keep my laptop computer, which is a Dell Latitude E4300 with Windows 7 Enterprise installed. I do not have any of the original disks for Windows. Recently, the hard-drive began
to fail, so I replaced it with a new one, cloning the old hard-drive onto the new one. Soon after that, a popup window began appearing saying that this computer is not running genuine windows. One important consequence of this is that I can no longer use Windows
Update, so I have concerns about security. If I go to the control panel under “System”, it says windows is activated and gives me the Product ID. I have talked to tech support at Microsoft, and they tell me something along the lines of the following: that
the problem is the new hard-drive is not recognized as being licensed to use this copy of Windows, and that I should post a question on one of the forums asking this: How can I reinstall Windows 7 Enterprise on the new hard-drive? Any assistance will be much
appreciated.
PS I have no idea which forum this should go under, so pretty much just picked one randomly.Thank you for the reply. Below is the diagnostic report:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-*****-*****-XVH7B
Windows Product Key Hash: juq6zzHf9lIH1XRY1VK2YrQYWO0=
Windows Product ID: 55041-011-1350732-86681
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {04DEBE17-699E-4D0A-A59D-3C196C2C84FE}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{04DEBE17-699E-4D0A-A59D-3C196C2C84FE}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-011-1350732-86681</PID><PIDType>6</PIDType><SID>S-1-5-21-240060965-2561850352-3419627931</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Latitude E4300 </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A21</Version><SMBIOSVersion
major="2" minor="4"/><Date>20110111000000.000000+000</Date></BIOS><HWID>68B63A07018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific Standard Time(GMT-08:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL
</OEMID><OEMTableID>M09 </OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Enterprise 2007</Name><Ver>12</Ver><Val>1DB36DFCEA6586</Val><Hash>uf4pjarnSPRhy0+iMrKzL8KTLeY=</Hash><Pid>89388-707-1262377-65112</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12" Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App
Id="44" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-011-135073-03-1033-7600.0000-0402011
Installation ID: 017002020180881956515246274583104396790522223804443953
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: XVH7B
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 6/6/2014 2:38:03 PM
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x000000000001EFF0
Event Time Stamp: 5:30:2014 15:10
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppobjs.dll
Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Tampered File: %systemroot%\system32\sppwinob.dll
Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Tampered File: %systemroot%\system32\drivers\spsys.sys
HWID Data-->
HWID Hash Current: MgAAAAEAAQABAAIAAQABAAAAAwABAAEAeqgiDXhybAimeiQ1hEDag8ysrmAi+8rbRso=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC DELL M09
FACP DELL M09
HPET DELL M09
BOOT DELL M09
MCFG DELL M09
____ DELL M09
ASF! DELL M09
TCPA
SLIC DELL M09
SSDT PmRef CpuPm
scott cohen -
Need help installing new hard drive and wiping the old one for Windows XP.
I’ve searched to try and figure out the answer to my question and haven’t been too successful, so hopefully someone can help me out. I have a new Mac Pro that I haven’t even turned it on yet because I’m waiting for some upgrades to show up. Here is what I plan to do, I’m unsure of what I need to do and what order to do it in:
It has a stock 250GB hard drive that I plan to wipe and install Windows XP on. I have a new 750GB drive coming that will run Leopard which will be my primary OS. Once I have this set up, I will probably try running VM Fusion which I assume I can install later on. Here are my questions:
When I put my new blank 750GB drive in to install Leopard, will OS X boot up off the Leopard install disc to then allow me to do the install?
When do I wipe the smaller drive to put Windows on it, before or after I’ve installed Leopard on the new drive? How should I wipe it, using the Bootcamp setup assistant or Disc Utility? If I wipe it after installing Leopard, will I be prompted for which drive to boot from?
Thanks in advance for any help.I don't use Windows, but I think the proper order to do things would be this:
First, if your Mac Pro came with Tiger installed, when you start it up for the first time, you'll need to go through some initial setup, create an administrator account, etc. You can go ahead and do this.
Afterwards, you can install your 750 GB drive. Next, you can insert your Leopard disk, and go to System Preferences/Startup Disk to choose to start up from the disk. (Alternatively, if you just choose "Install Mac OS X" from the disk, it will instruct you to restart the mac.)
When the mac boots from the disc, install Leopard on your 750. Once you have that done, and have booted from that drive, you'll be able to erase your 250 in Disk Utility, and then install Windows on it. -
New hard drive-where are the rest of my Apps?
I have a G4 iBook that had the hard drive replaced last week due to a hd failure. Most (if not all) of my data was available to be transferred to the new hd, and an OS upgrade to 10.4 was appreciated. However, now I do not have Appleworks (or iPhoto, Garageband, iMovie, etc.!) in my Applications folder anymore! How can I get back the factory-installed programs that were there when I got the computer as new? I have many documents which were created using AW. I have the MAC OS X Install Discs that came with the computer, but I do not want to revert back to the previous OS 10.3.5, just to recover AW. What to do?
You should have 3 Install discs, maybe a separate Apple Hardware Test, and 8 Software Restore discs. You don't need the 3 install disc which just install the Panther OS. You do want to use the 8 software restore discs to regain the software which originally came on your computer. They will restore the software even though you have upgraded the OS to Tiger. I know this because I had to do an erase and install on my iBook--and the same thing happened. I had a nice clean Tiger installation, but was missing Appleworks and other software that had originally come on the iBook. I was able to get them all back with the 8 discs. So I know this works from personal experience.
Good luck! -
I just want to migrate all of my work (all photos are referenced) from one drive to another and have my aperture library start working off of my new larger hard drive.
Depending on how your folder hierarchy is organized you might be able to do this with file->relocate masters and one of the options of folder organization that is provided but... if you have complicated hierarchy that Aperture will not reproduce then you can just copy all the entire folder hierarchy to the new drive using finder and then use file->locate masters to reconnect them to Aperture like this...
Aperture 3 – Locate Referenced Files « RB|Design
It's actually a bit easier if the old folder hierarchy/drive is disconnected when you do this for a few reasons.
RB -
Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.
Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile -
Can I get my bookmarks back after installing new hard drive?
Can I get my bookmarks back after installing new hard drive?
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name'' -
Can't seem to get my mac book to boot from the CD after installing new hard drive.
I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
http://store.apple.com/us/product/MC573Z/A
https://discussions.apple.com/message/16276201#16276201 -
hard drive on my mac died, installed new hard drive. When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?
Yes because that information is not located on the hard-drive of your new mac! If it is purchased content from the store, than this issue isn't as bad as it looks!
Here is a link explaining how to get your previously purchased content back:
http://support.apple.com/kb/HT2519
You also want to authorize your Apple ID account on the computer by following these instructions as well:
http://support.apple.com/kb/PH1730
Basically this link explains to go to the top left corner of your screen where you will see file, edit, view etc! Click on Store in that section and click on authorize this computer, also you want to make sure that the computer will not automatically sync by going to iTunes in the top left corner, just to the right of the apple symbol if iTunes is selected, and go to prefrences, and here you will see back up! Right under the back-ups has an option explaining to prevent devices from automatically syncing which is good cause you may be able to transfer your purchases from there which will put your content into the computer, and if that happens than we don't lose anything
Hopefully I was of some help:) -
Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?
Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.
-
Install new hard drive HELP !!!
Hello, I just install a new 500gb hard drive into my uni mb replacing my 160gb. I have nothing really important to save from my previous hard drive. I am starting from scratch. After installing the new hard drive and inserting the disc 1 and press 'c'. Follow the screen instruction but only get to step 3 where screen ask ' SELECT A DESTINATION'. I have waited for 30 mins and all i see was the same screen. I am unable to click on options and continue cos they were greyed out. The only button that is nor grey is the 'go back'.
I am eagerly trying to get this new hard drive installed. What should i do next. Have tried the restart and all i am able to continue is until the Select a destination page.
Hope to get a good advice from here and .......
Thanking you in advance for all help and assistance.Finally get the new hard drive installed from sratched. Once again many thanks to ypw. Once i clear the 'select a destination' step, the rest comes easy even for a novice like me.
Just for those who are curious to know the model of the hard drive that I installed. It is Hitachi 5K500 B-500. Choose this over the more popular WD Scorpion blue that most people are using. -
Installed new hard drive ran hp recovery disc's- get error code
I am reinstalling xp on a new hard drive and I get this message stop: 0x0000007b?
reinstalling xp and I get this message stop: 0x0000007b (oxf9e53524,0xc0000034,0x00000000,0x0000… It is on an hp dv5000 running windows xp professional! I have an old hard drive and it still works but since it says failure is innement I decided to get a new hard drive and when I used the recovery disc's on the new hard drive, i got the message above!
The weird thing is that I can put my old hard drive back into the laptop and it works fine but still about to fail! I also have an xp disc that my friend had so CAN I use it instead and would it fix my problem or not? The disc says this on it!
operating system cd microsoft windows xp home sp2 (contains software and drivers already installed. for software reinstallation and repair only)
(Please note: the software on this cd is already installed. store in a safe place and refer to your user documentation if you need to reinstall or repair your system software. for distribution with new hp or compaq pc)
ok there is only one disc and it is black and white ! Is this an actual windows xp disc that can be used on any hp that has had xp on it or what?
can I just install this cd and start from scratch or is it the same as my recovery discs?
I dont know how to boot into the menu and all that stuff so please be detailed if you can help me! I really appreciate any help! thanksNo, recovery discs are particular to each PC make and model.
I would try cloning the old hard drive to the new one using this software
http://www.todo-backup.com/products/home/free-backup-software.htm
Clone How to
http://www.todo-backup.com/products/features/disk-clone-guide.htm
You can order recovery media here
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If HP no longer has Recovery Media for your model, order them here
http://www.computersurgeons.com/Default.aspx -
i have install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen.
need helpFirst boot into recovery and select Disk Utility>First Aid and repair the disk.
If there is no improvement, perform a Safe Boot:
http://support.apple.com/kb/ht1
If there is an improvement, then third party applications are probably the cause of the problem.
Ciao. -
Windows setup error after installing new hard drive
My hard drive failed. After installing the new hard drive and running the recovery disks, I get an error that says windows setup could not configure windows to run on this hardware. The new HD is basically the same as the one originally in my HP Touchsmart
600-1155 PC.Hi Hpygram,
Please share more details about this issue.
1. What option did you choose when you use the recovery disks?
2. Did you perform the clean installation?
If you meet this error message when you perform the clean installation, please refer to the following KB for more details.
“Windows Setup could not configure Windows on this computer’s hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
http://support.microsoft.com/kb/2466753
• Check if the hard drive you are installing to is an "Advanced Format" disk.
• Check your setuperr.log and setupact.log to see if the error are related to your drivers.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
Maybe you are looking for
-
Unable to install version 4.0 on Mac running 10.4.11, left with nothing after 3.6 was removed
I am working on a Mac running OS 10.4.11. I was fat and happy running FF 3.6, but received a notification advising that an update was available. I dutifully clicked on the link, and downloaded vs. 4.0. It wiped out what I previous had as it began to
-
Return order after remitting excise
Hi All, I have a scenerio, we have returned a sales order which was delivered last month & even excise amount is paid for it. Now after return delivery how will debit the CENVAT? Ravi
-
Hi all, I have a doubt regarding the line item number in P.Req or P.O or any other document.. To make it more clear..Is it possible to change or configure the line item number such as 10, 20, 30 etc to 1, 2, 3 etc... 10. Pencils 20. Pen 30. Eraser I
-
I need to re-download Lion and install it, after re-formatting my hard-drive to "journaled" as requested. Holding the Option key while clicking on "purchases" does not work.
-
Enter start time and end time of inspection
Dear all Plz tell me where we can enter start time and end time of inspection. Regards Nirmala