Bookmarks is transitioning able to access your bookmarks in read-only -expect the transition to be fully complete by October 20, 2011, after which you will have access to your bookmarks with the ability to add/ edit/ delete bookmarks.

CAN ANYTHING BE DONE TO SPEED UP THIS TRANSITION PLEASE?

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

Similar Messages

On the back button is the little drop down arrow completely gone, or is there a way I can I get it back. With the new Firefox I have to keep hitting back over and over again?

Is the back button drop down arrow replaced by the little arrow next to the star on the bar?
Maybe it didn't install correctly, I have Windows XP if that makes a difference. I know from the tour when the new one loaded there is supposed to be a bookmarks thing next to the new location for home but it's not on there either. It's still on my toolbar so I don't care enough to fix it so there is no need for anyone to address it, I just put the info in case it tells you something about it not installing properly.
Sorry, it's not easy for older people to keep up with all the daily website changes, adding browser changes adds to the confusion. I hope my head doesn't explode one day. Thank you for the help.

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

HT3604 Please note that if you download the patch for this software, you will have to change your security settings in order to install it.

I'm guessing few people use this version of Aperture. Here's what happened because I use it. Apple spent several hours with me before I found the link to this software update.
Then I downloaded the patch. Then my computer would not install it as security changes needed to be changed from the standard: "only install software from the app store and identified developers." To install this patch, I needed to change settings to show, "allow applications downloaded from ANYWHERE."
This surprised me.
I ordered four books with this software today, spending over thirty dollars for each. For three of the four, I needed to change the order after it was processed by Apple so that the three gift books would be shipped to relatives instead of to me. NOTE THAT ADDING OTHER ADDRESSES WITHIN this version of Aperature doesn't change any shipping details in the actual order.
Since the rep told me the newer version is only about $90, I may spring for it. Or I might just give up on Aperture entirely and buy ADOBE Lightroom, since this application has been BUGGY.

Designer Handbag 
Rolex Replica 
Cheap handbag 
Swiss-made 
replica vuitton 
Replica Watche 
Designer Replicas 
Replica Watch Sale 
Louis Vuitton 
Fake Rolex 
Wholesale Replica 
Swiss Rolex 
Louis Vuitton Purses 
watch part 
Wholesale Louis Vuitton 
Authentic Swiss-Made 
Counterfeit Louis Vuitton 
buying watch 
Fendi Replica 
replica Submariner 
Vuitton Bag 
rolex air king 
LV Knockoffs 
rolex Day Date 
LV bags 
rolex Daytona 
replica wallet 
rolex datejust 
replica purse 
rolex explore 
vuitton wallet 
rolex milgauss 
knockoff handbags 
rolex GMT 
Burberry Handbags 
rolex sea dweller 
Burberry Wallets 
Rolex Yachtmaster 
Chanel handbag 
Swiss Replica 
Fendi Handbags 
Tag Heuer Replica 
Gucci bag 
Omega Watches 
J.P.Tods

TS1398 Hi...My wifi is not working. It is not dimmed out. When I turn it on it does not pick up any of the networks around me (I know there are a lot of networks available) I have tried resetting my wifi with the steps above but it still does not work. Pl

I have the most recent update.

That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific)

ADF data table with Add,Edit,Delete functionality

Hi Experts,
I have a adf page where I need to implement add,edit,delete button. The table was bind with the Webservice obj call.I need to have one single button as "Add" which should add an inline row at end of the table.When I ll double click on the row I should have the in-line edit of the row.And for delete functionality,there should be delete button on each row which should delete the correspond row.Please help me to solve my problem.Please share the code to meif u ve any.my email: [email protected]
Thanx
Aswini

Can you check the below links
http://andrejusb.blogspot.com/2010/05/crud-operations-in-oracle-adf-11g-table.html
http://andrejusb.blogspot.com/2009/11/crud-operations-in-jdeveloperadf-11g-r1.html
~Abhijit

Add/Edit/Delete Tree Nodes using CL_GUI_ALV_TREE

Hi All,
I am looking for an example of program with CL_GUI_ALV_TREE that have a functionality of add a tree node, edit a tree node, and delete a tree node.
I have already looked the BCALV_TREE* demo program but could not able to find a program to add/edit/delete node tree elements.
Any info on this.
Thanks
aRs

Hello aRs
Here is a sample report showing how to delete nodes in an ALV tree. The report was copied from BCALV_TREE_01. Search for added code:
*$ADDED: begin
*$ADDED: end[/code]
When you display the tree expand the first folder completely. When entering 'DELETE' into the command field directly the first flight date node will be deleted.
REPORT ZUS_SDN_BCALV_TREE_01_DELNODE.
based on: REPORT bcalv_tree_01.
Purpose:
~~~~~~~~
This report shows the essential steps to build up a hierarchy
using an ALV Tree Control (class CL_GUI_ALV_TREE).
Note that it is not possible to build up this hierarchy
using a simple ALV Tree Control (class CL_GUI_ALV_TREE_SIMPLE).
To check program behavior
~~~~~~~~~~~~~~~~~~~~~~~~~
Start this report. The hierarchy tree consists of nodes for each
month on top level (this level can not be build by a simple ALV Tree
because there is no field for months in our output table SFLIGHT.
Thus, you can not define this hierarchy by sorting).
Nor initial calculations neither a special layout has been applied
(the lines on the right do not show anything).
Note also that this example does not build up and change the
fieldcatalog of the output table. For this reason, all fields
of the output table are shown in the columns although the fields
CARRID and FLDATE are already placed in the tree on the left.
(Of course, this is not a good style. See BCALV_TREE_02 on how to
hide columns).
Essential steps (Search for '§')
~~~~~~~~~~~~~~~
1.Usual steps when using control technology.
 1a. Define reference variables.
 1b. Create ALV Tree Control and corresponding container.
2.Create Hierarchy-header
3.Create empty Tree Control
4.Create hierarchy (nodes and leaves)
 4a. Select data
 4b. Sort output table according to your conceived hierarchy
 4c. Add data to tree
5.Send data to frontend.
6.Call dispatch to process toolbar functions
*$ADDED: begin
DATA:
gd_del_nkey TYPE lvc_nkey.
*$ADDED: end
§1a. Define reference variables
DATA: g_alv_tree TYPE REF TO cl_gui_alv_tree,
 g_custom_container TYPE REF TO cl_gui_custom_container.
DATA: gt_sflight TYPE sflight OCCURS 0, "Output-Table
 ok_code LIKE sy-ucomm,
 save_ok LIKE sy-ucomm, "OK-Code
 g_max TYPE i VALUE 255.
END-OF-SELECTION.
CALL SCREEN 100.
*& Module PBO OUTPUT
 process before output
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAINTITLE'.
IF g_alv_tree IS INITIAL.
 PERFORM init_tree.
 CALL METHOD cl_gui_cfw=>flush
 EXCEPTIONS
 cntl_system_error = 1
 cntl_error = 2.
 IF sy-subrc NE 0.
 CALL FUNCTION 'POPUP_TO_INFORM'
 EXPORTING
 titel = 'Automation Queue failure'(801)
 txt1 = 'Internal error:'(802)
 txt2 = 'A method in the automation queue'(803)
 txt3 = 'caused a failure.'(804).
 ENDIF.
ENDIF.
ENDMODULE. " PBO OUTPUT
*& Module PAI INPUT
 process after input
MODULE pai INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
 WHEN 'EXIT' OR 'BACK' OR 'CANC'.
 PERFORM exit_program.
*$ADDED: begin
 WHEN 'DELETE'.
 CALL METHOD g_alv_tree->delete_subtree
 EXPORTING
 i_node_key = gd_del_nkey
 I_UPDATE_PARENTS_EXPANDER = SPACE
 i_update_parents_folder = 'X'
 EXCEPTIONS
 node_key_not_in_model = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CALL METHOD g_alv_tree->frontend_update.
*$ADDED: end
 WHEN OTHERS.
§6. Call dispatch to process toolbar functions
 CALL METHOD cl_gui_cfw=>dispatch.
ENDCASE.
CALL METHOD cl_gui_cfw=>flush.
ENDMODULE. " PAI INPUT
*& Form init_tree
 text
--> p1 text
<-- p2 text
FORM init_tree.
§1b. Create ALV Tree Control and corresponding Container.
create container for alv-tree
DATA: l_tree_container_name(30) TYPE c.
l_tree_container_name = 'CCONTAINER1'.
CREATE OBJECT g_custom_container
 EXPORTING
 container_name = l_tree_container_name
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
 MESSAGE x208(00) WITH 'ERROR'(100).
ENDIF.
create tree control
CREATE OBJECT g_alv_tree
 EXPORTING
 parent = g_custom_container
 node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
 item_selection = 'X'
 no_html_header = 'X'
 no_toolbar = ''
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 illegal_node_selection_mode = 5
 failed = 6
 illegal_column_name = 7.
IF sy-subrc <> 0.
 MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
§2. Create Hierarchy-header
The simple ALV Tree uses the text of the fields which were used
for sorting to define this header. When you use
the 'normal' ALV Tree the hierarchy is build up freely
by the programmer this is not possible, so he has to define it
himself.
DATA l_hierarchy_header TYPE treev_hhdr.
PERFORM build_hierarchy_header CHANGING l_hierarchy_header.
§3. Create empty Tree Control
IMPORTANT: Table 'gt_sflight' must be empty. Do not change this table
(even after this method call). You can change data of your table
by calling methods of CL_GUI_ALV_TREE.
Furthermore, the output table 'gt_outtab' must be global and can
only be used for one ALV Tree Control.
CALL METHOD g_alv_tree->set_table_for_first_display
 EXPORTING
 i_structure_name = 'SFLIGHT'
 is_hierarchy_header = l_hierarchy_header
 CHANGING
 it_outtab = gt_sflight. "table must be empty !
§4. Create hierarchy (nodes and leaves)
PERFORM create_hierarchy.
§5. Send data to frontend.
CALL METHOD g_alv_tree->frontend_update.
wait for automatic flush at end of pbo
ENDFORM. " init_tree
*& Form build_hierarchy_header
 build hierarchy-header-information
 -->P_L_HIERARCHY_HEADER strucxture for hierarchy-header
FORM build_hierarchy_header CHANGING
 p_hierarchy_header TYPE treev_hhdr.
p_hierarchy_header-heading = 'Month/Carrier/Date'(300).
p_hierarchy_header-tooltip = 'Flights in a month'(400).
p_hierarchy_header-width = 30.
p_hierarchy_header-width_pix = ' '.
ENDFORM. " build_hierarchy_header
*& Form exit_program
 free object and leave program
FORM exit_program.
CALL METHOD g_custom_container->free.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form create_hierarchy
 text
--> p1 text
<-- p2 text
FORM create_hierarchy.
DATA: ls_sflight TYPE sflight,
 lt_sflight TYPE sflight OCCURS 0,
 l_yyyymm(6) TYPE c, "year and month of sflight-fldate
 l_yyyymm_last(6) TYPE c,
 l_carrid LIKE sflight-carrid,
 l_carrid_last LIKE sflight-carrid.
DATA: l_month_key TYPE lvc_nkey,
 l_carrid_key TYPE lvc_nkey,
 l_last_key TYPE lvc_nkey.
§4a. Select data
SELECT * FROM sflight INTO TABLE lt_sflight UP TO g_max ROWS.
§4b. Sort output table according to your conceived hierarchy
We sort in this order:
 year and month (top level nodes, yyyymm of DATS)
 carrier id (next level)
 day of month (leaves, dd of DATS)
SORT lt_sflight BY fldate0(6) carrid fldate6(2).
Note: The top level nodes do not correspond to a field of the
output table. Instead we use data of the table to invent another
hierarchy level above the levels that can be build by sorting.
§4c. Add data to tree
LOOP AT lt_sflight INTO ls_sflight.
Prerequesite: The table is sorted.
You add a node everytime the values of a sorted field changes.
Finally, the complete line is added as a leaf below the last
node.
 l_yyyymm = ls_sflight-fldate+0(6).
 l_carrid = ls_sflight-carrid.
Top level nodes:
 IF l_yyyymm <> l_yyyymm_last. "on change of l_yyyymm
 l_yyyymm_last = l_yyyymm.
*Providing no key means that the node is added on top level:
 PERFORM add_month USING l_yyyymm
 CHANGING l_month_key.
The month changed, thus, there is no predecessor carrier
 CLEAR l_carrid_last.
 ENDIF.
Carrier nodes:
(always inserted as child of the last month
which is identified by 'l_month_key')
 IF l_carrid <> l_carrid_last. "on change of l_carrid
 l_carrid_last = l_carrid.
 PERFORM add_carrid_line USING ls_sflight
 l_month_key
 CHANGING l_carrid_key.
 ENDIF.
Leaf:
(always inserted as child of the last carrier
which is identified by 'l_carrid_key')
 PERFORM add_complete_line USING ls_sflight
 l_carrid_key
 CHANGING l_last_key.
ENDLOOP.
ENDFORM. " create_hierarchy
*& Form add_month
FORM add_month USING p_yyyymm TYPE c
 p_relat_key TYPE lvc_nkey
 CHANGING p_node_key TYPE lvc_nkey.
DATA: l_node_text TYPE lvc_value,
 ls_sflight TYPE sflight,
 l_month(15) TYPE c. "output string for month
get month name for node text
PERFORM get_month USING p_yyyymm
 CHANGING l_month.
l_node_text = l_month.
add node:
ALV Tree firstly inserts this node as a leaf if you do not provide
IS_NODE_LAYOUT with field ISFOLDER set. In form 'add_carrid_line'
the leaf gets a child and thus ALV converts it to a folder
automatically.
CALL METHOD g_alv_tree->add_node
 EXPORTING
 i_relat_node_key = p_relat_key
 i_relationship = cl_gui_column_tree=>relat_last_child
 i_node_text = l_node_text
 is_outtab_line = ls_sflight
 IMPORTING
 e_new_node_key = p_node_key.
ENDFORM. " add_month
FORM add_carrid_line USING ps_sflight TYPE sflight
 p_relat_key TYPE lvc_nkey
 CHANGING p_node_key TYPE lvc_nkey.
DATA: l_node_text TYPE lvc_value,
 ls_sflight TYPE sflight.
add node
ALV Tree firstly inserts this node as a leaf if you do not provide
IS_NODE_LAYOUT with field ISFOLDER set. In form 'add_carrid_line'
the leaf gets a child and thus ALV converts it to a folder
automatically.
l_node_text = ps_sflight-carrid.
CALL METHOD g_alv_tree->add_node
 EXPORTING
 i_relat_node_key = p_relat_key
 i_relationship = cl_gui_column_tree=>relat_last_child
 i_node_text = l_node_text
 is_outtab_line = ls_sflight
 IMPORTING
 e_new_node_key = p_node_key.
ENDFORM. " add_carrid_line
*& Form add_complete_line
FORM add_complete_line USING ps_sflight TYPE sflight
 p_relat_key TYPE lvc_nkey
 CHANGING p_node_key TYPE lvc_nkey.
DATA: l_node_text TYPE lvc_value.
WRITE ps_sflight-fldate TO l_node_text MM/DD/YYYY.
add leaf:
ALV Tree firstly inserts this node as a leaf if you do not provide
IS_NODE_LAYOUT with field ISFOLDER set.
Since these nodes will never get children they stay leaves
(as intended).
CALL METHOD g_alv_tree->add_node
 EXPORTING
 i_relat_node_key = p_relat_key
 i_relationship = cl_gui_column_tree=>relat_last_child
 is_outtab_line = ps_sflight
 i_node_text = l_node_text
 IMPORTING
 e_new_node_key = p_node_key.
*$ADDED: begin
IF ( ps_sflight-fldate = '20040522' ). " first flight date
 IF ( gd_del_nkey IS INITIAL ). " collect only first date
 gd_del_nkey = p_node_key.
 ENDIF.
ENDIF.
*$ADDED: end
ENDFORM. " add_complete_line
*& Form GET_MONTH
 text
 -->P_P_YYYYMM text
 <--P_L_MONTH text
FORM get_month USING p_yyyymm
 CHANGING p_month.
Returns the name of month according to the digits in p_yyyymm
DATA: l_monthdigits(2) TYPE c.
l_monthdigits = p_yyyymm+4(2).
CASE l_monthdigits.
 WHEN '01'.
 p_month = 'January'(701).
 WHEN '02'.
 p_month = 'February'(702).
 WHEN '03'.
 p_month = 'March'(703).
 WHEN '04'.
 p_month = 'April'(704).
 WHEN '05'.
 p_month = 'May'(705).
 WHEN '06'.
 p_month = 'June'(706).
 WHEN '07'.
 p_month = 'July'(707).
 WHEN '08'.
 p_month = 'August'(708).
 WHEN '09'.
 p_month = 'September'(709).
 WHEN '10'.
 p_month = 'October'(710).
 WHEN '11'.
 p_month = 'November'(711).
 WHEN '12'.
 p_month = 'December'(712).
ENDCASE.
CONCATENATE p_yyyymm+0(4) '->' p_month INTO p_month.
ENDFORM. " GET_MONTH
/code
Regards
Uwe

Content retrieved through RIDC after add/edit/delete is not updated

Hi
There is a functionality such that a user is shown the content details like folder name and content under the folder name to be displayed on the portal.
Basically, the metadata of the folder and content need to be displayed and add/edit/delete operations need to be available for the user.
So any updates performed on the UCM content from the portal need to be updated on the UCM.
To enable this functionality made use of the RIDC API. Everything as to content display, add/edit/delete operations are all working fine and getting updated on the UCM front also.
But the issue is that after these operations being performed the user needs to be displayed updated content information on the portal. But while trying to retrieve the results using SEARCH RIDC Service, results are fetching the old data and hence the content information displayed on the page is also stale.
While trying to hit the URL again i.e. a new request then the updated contents get dispalyed.
Can anybody tell me what could be the issue? I am unable to understand the issue.
All this has been done using taskflows.
Thanks

Hi ,
Most probably the content is not indexed in the interval when it is updated and then retrieved with search call . As a test , recreate the issue and then open UCM Web UI - Content Information (of the content updated / searched ) - check the Status value for the latest revision .
Most likely it will be in Done status (if no conversion is being used) .
Second time when you the actual correct data shows up then check the Status and there it would be in Released status .
I believe that you are trying to search / display the content even before the new version is indexed and made available for search .
Thanks
Srinath

ICal 4.0 and Snow Leopard: can't add / edit / delete events + workaround

Hi,
iCal 4.0 under 10.6.1, any changes I made in iCal was reversed when I quit and reopened iCal. Plus my changes didn't sync to my iPod.
When looking at the Console.app, I saw:
2009/09/15 13:31:51 iCal[11918] save failed: Error Domain=CalCalendarStorePersistenceErrorDomain Code=1 UserInfo=0x115d4c780 "The end date can’t be set to occur before the start date. Change the end or start date." {
NSLocalizedDescription = "The end date can\U2019t be set to occur before the start date. Change the end or start date.";
I tried to export / delete / import all my calendars, that didn't help. Then I noticed I also have the calendar automatically generated for the birthdays from my address book.
I unchecked "Show Birthdays calendar" from the General preferences. Now iCal works again (I can add / edit / delete events and the error message doesn't show in the Console.app anymore)
Cheers,
Janus

I have updated my OS to 10.9 hoping this to fix my problem.... but nothing... It's still the same....

I just updated to 4.0.1 and I get the "We're sorry. Firefox had a problem and crashed. We will try to open your tabs/windows when Firefox restarts" However, it just keeps popping back up, firefox never restarts!!!

This morning I had a popup on my Windows XP PC stating that the 4.0.1 update was available. I upgraded. now, i receive the following error: We're sorry. Firefox had a problem and crashed. We will try to open your tabs/windows when Firefox restarts. You can submit crash report data, blah blah blah (which i have submitted several)
But, firefox DOES NOT ever open. It just pops back up with that same report window, over and over.

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

I want to save my music library in the cloud /iTunes Match, but want both my wife's devices and mine to have access. Is this possible, and what's the best way to do this?

Hi all,
Can I store my iTunes file in the cloud, so that my wife and I can access it from various devices.
Devices would include 2 iPhone 6S, 2 iPad2s, couple of iPods and a MacBook Air.
We can't save all the music to a hard drive due to storage size.
If we save it to the Cloud, can we create playlists and only download these as /when we need them?
Thanks in advance,
Ed

Hi,
Your music needs to be in your iTunes library on your computer or on an external drive. Read this user topic Make and keep a backup of your iTunes library, and only stream from the cloud.
You can only use one Apple ID with match. For your wife to get access to your music in the cloud, you will need to use your Apple ID
Subscribe to iTunes Match - Apple Support
Manage your associated devices in iTunes - Apple Support
Jim

Before when I clicked on a hyperlink in a Pages document Pages immediately opened the link. Now Pages ask if I want to "Edit or Open" the link. Is this an option that I can turn or off or is this just a change with the latest update? Thi

Before when I clicked on a hyperlink in a Pages document Pages immediately opened the link. Now Pages ask if I want to "Edit or Open" the link. Is this an option that I can turn or off or is this just a change with the latest update? This only started in the last six months or so.
iWorks "09" Pages ver 5.2

Use Pages '09 which should still be in your Applications/iWork folder.
Peter

Iation. When I import it to iMovie 6.0.3 the clip is on its side. How do I rotate it 90% . You ten have to turn your head sideways to view it ! How can I rotate the orientation?

I've imported a QTPmovie 10.03 from my iphone4 in portait orientation.
When I import it to iMovie 6.0.3 the clip is on its side. How do I rotate it 90% . You then have to turn your head sideways to view it ! How can I rotate the orientation in imovie 6.0.3?

Klaus
Unfortunately, I did not have any success with this.
These pages were " not found"
http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#vert-horiz_rotate
http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#43-169
and
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
only opened in http://www.apple.com/
- it kept deleting /downloads/macosx/video/mpegstreamclip.html .
However, I googled and found http://tips4mac.blogspot.co.uk/2007/08/rotating-clip-in-imovie-06.html this really helpful..and it worked !
regards
BKDB

I have a large number of photos I'd like to delete from my ipad 2 however from reading previous comments it seems I have to unsync from the original source computer. I'm in another country now and don't have access to it. Is there another way?

I have a large number of photos I'd like to delete from my ipad 2 however from reading previous comments it seems I have to unsync from the original source computer. I'm in another country now and don't have access to it. Is there another way?

You should be able to do this via the iPad directly. Open the Photos application and the forward arrow, then select all of the photos you want to delete and click the red delete button.

Plz suggest me the website by which i can download videos from youtube in 1 click ... i mean in which there will be a option of download appears same as like, add to, share,

plz suggest me the website by which i can download videos from youtube in 1 click ... i mean in which there will be a option of download appears same as like, add to, share,

This addon can help to you
* https://addons.mozilla.org/en-US/firefox/addon/video-downloadhelper/

Accidently changed the "ownership & permissions" access admin setting to "read only"

In the "Get Info" window on my MacBook hard drive icon, I accidently changed the "ownership & permissions" access admin setting to "read only" & now it won't re-boot the operating system. Just displays the Apple logo & running wheel on a white screen . Any advice on how best to re-set/restore would be very much appreciated, thanks

This might help. Otherwise, it might be necessary to reinstall.
https://discussions.apple.com/docs/DOC-2240

Bookmarks is transitioning able to access your bookmarks in read-only -expect the transition to be fully complete by October 20, 2011, after which you will have access to your bookmarks with the ability to add/ edit/ delete bookmarks.

Similar Messages

Maybe you are looking for