BOOKMARKS SIDEBAR DOES NOT COME UP AUTOMATICALLY

went to 'view' selected 'sidebar' but must do this each time no longer permanently keeps this selection

whenever i launched firefox it opened my homepage in full screen and the sidebar to the left . . . now the sidebar area remains blank and i have to select view in order to see it . . . very frustrating . . . appreciate help

Similar Messages

My mail does not come in automatically even though i have it set as auto. I need to click on get mail each time

My email does not come in until I click on get mail. I have the check mail set automatically in my preferences under general. What am I doing wrong? Cheers John

OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

PSE 8 organize and edit does not come up automatically like it use to

When I connect my camera or a thumb drive to my computer, PSE 8.0 edit and organize use to come up automatically and made it easy to import pictures. However, that automatic feature no longer works. Now I'm given the choice to select "Organize and Edit using Adobe Elements Organizer 8.0". And when I click this, I get the message, "This file does not have a program associated with it for performing this action. Create an association in the Set Associations control panel." I've tried to correct this but have had no luck. I realize I can open PSE organized, click on File, and then on Get photos and videos, then click From camera or scanner, and then... So, if you know how to get this automatically running again, i would greatly appreciate it. Thanks.

Hello Ron,
Unfortunately, the automatic reaction to plugging in your camera is a function of the Operating System. But we should be able to do something about that, but it depends on which OS.
Win XP
With the camera plugged in and turned on, if you go to My Computer your camera should be listed (like any other drive, but have a camera icon). If you right-click and go to Properties, you should have an Events tab. With the event set to "Camera connected" go to the Actions section. At this point, it is probably set to "Prompt for which program to run". Change it to "Run this program:" and choose Elements Organizer from the drop-down list.
Windows Vista/7
With the camera plugged in and turned on, if it does not open automatically, go to the device settings (Control Panel>Devices and Printers and select the camera). Click on "Change general settings". From the "When this device connects to this computer" drop-down, choose "Organize and Edit with Adobe Elements Organizer 8".
Hope that helps!
-Brett

How do I add an app to my location services when it does not come up automatically, How do I add an app to my location services when it does not come up automatically

How do I add an app to location services when it does not appear automatically

Have you tried Settings>Privacy>Location Services and see if you can turn it on in there?
Obviously it has to be an app that works with location services so if it is and nothing else works, delete the app and download it again to make it ask again if you want to allow your location to be used with it.

Once i am out of wifi network my airtwl 3G netwok does not come back automatically i have to switch off the phone and switch on. any solution

hi when ever i am out of my wifi network i dont get back my 3 G connection . I have to switch off the mobile and switch on to get back my 3G network of my service provider

In settings>general> cellular do you have it turned ON?

When I click on a bookmark to open it, the bookmark (in the sidebar) does not stay highlighted. Why?

When I open a bookmark, the bookmark title from the list in the sidebar does not stay highlighted. It used to but doesn't anymore. Do you know why? Can I change an option to get that feature back?

Hello Donald.
Although possibly not related to your problem, I will remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
As for your issue, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

New tab does not come up blank but shows firefox unable to bring up web site in box

Pressing + on Tab bar does not come up blank, but comes up as Server not found Firefox can't find the server at www.
then various letters and symbols oki.com
How do I get rid of this to enable a blank page or nine illustrated tabs to come up, as on my other laptop?

You won't see the SearchReset extension in "Tools > Add-ons > Extensions" because the code only run once and the extension automatically uninstalls itself, so this is expected behavior.
You can check for problems with preferences and rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
You can try to create a new profile or reset Firefox.
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
If you reset Firefox then a new profile is created and some of your data (bookmarks, history, cookies, passwords, form data) is automatically imported and your current profile will be moved to the desktop (Old Firefox Data).
You will lose extensions and other customizations (toolbars, prefs) that you've made.
It is possible to recover more data from the old profile, but be cautious to avoid carrying over the problem.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

Why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?

I took 6 panorama shots of a scene and used CC to Photomerge them as one. Couldn't see where to automatic blend the edges and there was 'stitch' lines when the images were merged. So i did the same in Elements 11 and it was perfect. Am i doing something wrong in CC or perhaps not doing something at all?
Any help, please?
Dave

Hi - Thanks for taking the time to reply and i appreciate the remarks- if a little harsh- we all have to start somewhere and i am fully aware of the limitations of Elements which is why i decided to add CC to my software. I can only say that if an inferior quality software from Adobe does the job well then CC must also be suited to doing the same which is why i can only think, from your comments, that i have not done something simple- however- following tutorials to get to the end result should have sufficed- it didn't so perhaps i will consider posting the difference between the two applications- and, perhaps suffer a few more 'harsh' comments. The learning curve is quite steep and i am a visual learner, but i'm also not totally incompetent:)
Kind Regards
Dave Munn
Original message----
From : [email protected]
Date : 02/02/2015 - 06:45 (GMTST)
To : [email protected]
Subject : why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
created by station_two in Photoshop General Discussion - View the full discussion
First a clarification: you are not addressing Adobe here in these user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
I'll give it my best shot anyway.
Few folks in this forum are really familiar with Elements, for which there's a dedicated, totally separate forum.
Different engineering teams, also.
From this perspective, it will be difficult to give you a direct answer to your "why?" question.
Personally, I blend very large panorama shots in Photoshop proper since I can't even remember when without any issues whatsoever, up to and including in Photoshop CS6 13.0.6.
Without being at your computer and without looking at your images, I couldn't even begin to speculate what you are doing wrong in Photoshop, which I suspect you are. The least you could show is post examples from your panoramas that have gone wrong.
I can tell you that panorama stitching requires significant overlap between the individual shots, besides common-sdense techniques like a very solid tripod and precision heads.
The only version of Elements I have ever used for any significant time was Elements 6 for Windows, which I bought in 2008 to use on a PC (I've been an avid Mac user for 30 years). I found Elements so limited and so bad that I successfully demanded a refund from Adobe. IU mention this only to emphasize that I can truly only address your question from a Photoshop (proper) and Mac user point of view. I couldn't care less about Elements, but if you have comparison examples of panoramas processed in both applications, by all means post those two.
Generally speaking Photoshop is a professional level application that makes no apologies for its very long and steep learning curve, while Photoshop has many hand-holding features for amateurs and beginners.
Perhaps the bottom line is that you should stick with Elements if you personally manage to get better results there.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7152397#7152397 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7152397#7152397
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How come the item value does not come thru via PL/SQL anonymous block?

Hi,
It's a Form with 3 tables -
1) ClinicianProfileTb (with about 40 columns, insert/update via DML),
2) PeopleTb (with about 7 columns, insert/update via PL/SQL anonymous block) and
3) ClinicianPracticeTb (with about 10 columns, insert/update via PL/SQL anonymous block) for after-submit-processes.
So I have several After-Submit-Processes. For some reason, it appears that PeopleId which is supposed to come thru via the 2nd After-Submit-Process (ie: Insert/Update PeopleTb) does not do the way it's supposed to. And when I press "Create" button at the bottom, I got the following error msg:
ORA-01400: cannot insert NULL into ("TEST_0712"."CLINICIANPRACTICETB"."PEOPLEID")
I tried the "debug" mode (via edit page link), but to no avail. (I'm newbie, trying to learn and deliver at the same time :)).
I uploaded the app to apex.oracle.com, if someone could kindly take a look and let me know what goes wrong, it'd be greatly appreciated.
workspace: test_0712
app: 43408 - TEST
user: demo
pswd: demoPswd
Page#21 -> look at the After-Submit-Processes -> in "Insert/Update PeopleTb" it appears that PeopeId does not come thru; thus it cannot be updated to ClinicianProfileTb.PeopleId (allows null) -> and thus cannot be inserted into ClincianPracticeTb.PeopleId (which does NOT allow null). Basically my logic is that in order to create ANY row in ClinicianPracticeTb, BOTH PracticeId AND PeopleId must be present.
Acutally I should have used the PeopeTb as DML (as the driving table) to enforce that PeopleId must be present in order to insert ClinicianProfileTb and ClinicianPracticeTb, but it'd be lots of codes to write to insert/update in ClinicianProfileTb (40 columns).
In addition, does ApEx consider EVERY SINGLE after-submit-process are in ONE transaction for commit/rollback? It appears that it treats all PL/SQL anonymous blocks are in ONE transaction, while Automatic Row Processing (DML) is commited/rolled back on its own?
Thanks much,
Helen

All blocks that do not commit in one of the ways I detailed (and which do not explicitly commit using a commit statement) are part of the transaction started with > the first DML statement issued in any of the page processes and continuing until a commit is issued.Say, there are the following processes in the After-Submit-Processes:
1. Process1 -> Automatic Row Processing (DML)
2. Process2 -> PL/SQL anonymous block
3. Process3 -> PL/SQL anonymous block
Based on what you describe, in the event that if there is no explicit "commit" issued in any of these processes, then an implicit "commit" will be issued at the end of Process3?
Thanks, Scott.
Doreen

Sidebar does not display when in Develop module

Issues with the sidebars in Develop module such as when hovering mouse over left or right on screen does not make sidebar show. Also, when in full screen mode the sidebars seem to have been completely disabled. Have just upgraded from LR 3 to 5.

Thanks ssprengel. There seems now to be two different 'full screen' modes. Pressing the Shift and F keys changes what you see. I'm used to only pressing the F key. Now I am able to view the side bars, as well as the top and bottom bars, when I wish. However, maybe a bug, maybe not, the right bar does not come into view when the curser hovers over the left hand side. The three other side bars, top, left and bottom, do become visible when curser hovers over the respective areas. Thanks to your help this is no longer as important an issue (for me at least). In the Window menue you have the Screen Mode which gives you all the options. Thanks again.

Table in scrolling sidebar does not display in Preview

I pasted a table into the scrolling sidebar widget, it see the table fine in iBooks Author, can edit it and everything. I send a preview to my iPad and the whole widget appears as a blank but if I scroll through, I do see a scroll bar so the widget is not empty, but the content is invisible. I do see the content while the page is loading and in the table of contents when the page appears as an icon.

Thanks ssprengel. There seems now to be two different 'full screen' modes. Pressing the Shift and F keys changes what you see. I'm used to only pressing the F key. Now I am able to view the side bars, as well as the top and bottom bars, when I wish. However, maybe a bug, maybe not, the right bar does not come into view when the curser hovers over the left hand side. The three other side bars, top, left and bottom, do become visible when curser hovers over the respective areas. Thanks to your help this is no longer as important an issue (for me at least). In the Window menue you have the Screen Mode which gives you all the options. Thanks again.

HT4623 My iPad does not have the automatic software update and I do not know how to download IOS if under settings there is no software update button available. Do I have to reset my iPad and lose data?

My iPad does not have the automatic software update and I do not know how to get IOS 6 onto it. When I go into settings there is no software update button.

If you are really on iOS 5 then look in Settings > General > Software update.
Otherwise:
If you are using iOS 4 (or earlier) there is no Software Update in Settings. That feature was first added in iOS 5.
To update you will have to connect your iPad to iTunes on a computer (preferably the one you sync with and backup to).
See here: http://support.apple.com/kb/HT4972

My Bookmarks toolbar does not show a Bookmarks Manager, so I can't export my bookmarks to a new computer.

I want to export my Bookmarks from Firefox on this computer to Firefox on my new computer. The Bookmarks Manager does not show on the Bookmarks toolbar. Where is it? How can I access it so I can use the export tool?
This computer is Windows Vista - my new one is Windows 7.

"Bookmarks > Organize Bookmarks" has been renamed to "Show All Bookmarks" in Firefox 4 and later.
*https://support.mozilla.com/kb/how-do-i-use-bookmarks

I cannot connect my printer. The nearby option does not come up on screen.

I cannot connect my hp photsmart printer. The "Nearby" option does not come up on the screen and it won't respond when I type in the name. The computer's wireless is working as well as the wireless on the printer.

Hi Icullinan,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link below for more information:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
OS X: Connecting a Wi-Fi printer to your Wi-Fi networkhttp://support.apple.com/kb/ht3500
Cheers,
- Judy

HT4539 On my iPad2 the ícon "músic" does not appear on automatic downloads like on my iPhone 4. What must I do?

Subject:
On my iPad2 the ícon "músic" does not appear on automatic downloads like on my iPhone 4. What must I do?

- If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
- You need iTunes 10.7 or later on the computer.
- If still problems see:
iOS: Device not recognized in iTunes for Mac OS X
- Try another cable.

BOOKMARKS SIDEBAR DOES NOT COME UP AUTOMATICALLY

Similar Messages

Maybe you are looking for