Books For DB level Performance Analysis and fixing.

Hi All, i want expert advice on below.
Which book will be the best one to ,gain knowledge regarding different DB(My PROD is ORACLE 10g) level performance analysis?
I have read books those are specific to SQL level performance analysis like (Trouble shooting Oracle performance by Christian Antogini,Effective Oracle by Design by thomas kyte, Cost based oracle fundamentals by Jonathan Lewis).
Now i want something specific to OVERALL DB level tuning like DB wait events/cpu usage/memory usage/PGA sizing/DB parameters/performance views and scripts
for digging more into issue etc..
Please let me know.

Hi;
Similasr issue mention here many times, please use search mechanisim:
https://forums.oracle.com/forums/search.jspa?threadID=&q=performance+database+and+book&objID=c18&dateRange=all&userID=&numResults=15
Regard
Helios

Similar Messages

Performance analysis and monitoring of a Forteapplication

Hello,
It would be good if one could do some performance analysis and monitoring of
a Forte application at production time.
By performance analysis I mean measure the time some selected methods take
to return. In a CS application such a method would be some selected method
of a key remote service representative of the application's activity.
One would like to mesure the min, max, average time, and also give a
threshhold which when reached will automatically generate an alarm or some
pre-defined processing.
The most powerful way would be to use a SNMP application through a Forte -
SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
in the 96' Forte Forum proceedings).
But before going that far some simple means accessible through EConsole
would already be great.
A collegue of mine when to that Forum and reported that Puterbaugh said that
such an agent is currently missing, but that its implementation is not
difficult.
I looked at all the agents and their instruments. I came to the following
conclusions :
1) instrumented data are available at the granularity level of a partition,
not at a smaller granularity. For example, the DistObjectMgr agent gives you
very useful information : the number of events (sent/received) and the
number of (remote) methods (called/invoked), but this for the entire
partition. Thus it prevents making tuned observations (unless you partition
in a special way your application to put in a dedicated partition the thing
you want to observe and only this thing).
2) there is no instrumented data related to processing time.
This leads me to the point that no information observed by the standard
agents help me figuring out my performances. Thus I have to add at
development time some lines of code to the methods I potentially want to
observe later at production time to generate the appropriate information a
custom agent will then display (process) with the appropriate instruments.
Does someone share this position ?
Has someone implemented such an agent and assotiated means ?
PS: I will probably implement my own one if no other way around.
best regards,
Pierre Gelli
ADP GSI
Payroll and Human Resources Management
72-78, Grande Rue, F-92310 SEVRES
phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
fax : +33 1 41 14 85 99

Hello,
It would be good if one could do some performance analysis and monitoring of
a Forte application at production time.
By performance analysis I mean measure the time some selected methods take
to return. In a CS application such a method would be some selected method
of a key remote service representative of the application's activity.
One would like to mesure the min, max, average time, and also give a
threshhold which when reached will automatically generate an alarm or some
pre-defined processing.
The most powerful way would be to use a SNMP application through a Forte -
SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
in the 96' Forte Forum proceedings).
But before going that far some simple means accessible through EConsole
would already be great.
A collegue of mine when to that Forum and reported that Puterbaugh said that
such an agent is currently missing, but that its implementation is not
difficult.
I looked at all the agents and their instruments. I came to the following
conclusions :
1) instrumented data are available at the granularity level of a partition,
not at a smaller granularity. For example, the DistObjectMgr agent gives you
very useful information : the number of events (sent/received) and the
number of (remote) methods (called/invoked), but this for the entire
partition. Thus it prevents making tuned observations (unless you partition
in a special way your application to put in a dedicated partition the thing
you want to observe and only this thing).
2) there is no instrumented data related to processing time.
This leads me to the point that no information observed by the standard
agents help me figuring out my performances. Thus I have to add at
development time some lines of code to the methods I potentially want to
observe later at production time to generate the appropriate information a
custom agent will then display (process) with the appropriate instruments.
Does someone share this position ?
Has someone implemented such an agent and assotiated means ?
PS: I will probably implement my own one if no other way around.
best regards,
Pierre Gelli
ADP GSI
Payroll and Human Resources Management
72-78, Grande Rue, F-92310 SEVRES
phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
fax : +33 1 41 14 85 99

Performance analysis and optimization tools

Hello I am looking for some tools for Performance analysis and optimization for Oracle. For now I looked over Spotlight, Ignite and Embarcadero DB Optimizer. Can you please point out some links or something for comparing such tools?
What tools do you use?
Thanks,

For performance analysis you can use AWR and ASH.
-- How to analyze AWR/statpack
http://jonathanlewis.wordpress.com/statspack-examples/
-- how to take AWR and ASH report
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/autostat.htm#PFGRF02601
http://www.oracle.com/technology/pub/articles/10gdba/week6_10gdba.html
Regards
Asif Kabir

HT1040 I have previously submitted a book for printing three different times and Apple has told me it's been unreadable. I have previously previewed it before sending and it was perfect. I have followed all other directions. Help.

I have previously submitted a book for printing three different times and Apple has told me each time it's unreadable. I have previously previewed it each time before sending and it was perfect. I have followed all other directions - updated software, all other applications off etc. What am I doing wrong?

Boot into Safemode and Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
If it is good order while in safe mode
LN

How to load Cj01 create project for WBS level 1,2 and 3

Dear All
I want to load the project for WBS element.I had used IDOC project01 for the same but I am getting error as 'SaveReplica'method was not called up via ALE.I am presently trying with LSMW recording for tcode CJ01 in order to populate the
wbs levels 1 ,2 and 3 since the hierachy is not fixed i:e there is no limit as to how many 2 or 3 wbs levels are there so how shall i proceed with recording.If any body has migrated Projects for WBS elements please do share me.In my recording i am getting error 'Do not enter a level greater than 2'.is it that i have to carry t recording for each level seperately.
Tried with Bapi Bapi_project_maintain and all Bapis related to it most of the cases i am getting
error as to no initialization created though having executed Bapi_Ps_Initialization.
Regards
Somnath

Hi Somnath,
The BAPI, BAPI_PROJECT_MAINTAIN should work for any levels of requirement..and you dont need to initialize it. First, go through the documentation given in the SE37 transaction code. It will explain all. Just concentrate on the reference number. If you see in the example given there, two wbs elements are being created.
Then you have to use methods like create,save...unlike other BAPI's.
Just go through the documentation once.
Regards,
Vishwa.

PR workflow for item level release (stock and non-stock)

Hello gurus,
I am not getting the agents.!!
I am creating a workflow for pr( item level release)..and using standard wf WS00000038 for this, as the standard wf contains the simple release procedure only but i have to add some custom steps to it, so i have copied this wf as custom wf .
In this wf i have to fetch the agents based on the "stock" and "non-stock items".
so i have maintained strategies and release code like:
i have maintained two strategies W1(non-stock) and W2(stock)..and release code for W1 are P1 and P2..here P1 i have given for my first level of approval and P2 for second level of approval.
The release code for W2 are P3 and P2..first level is P3 and second is P2.
so what i have did in a workflow , started with a condition step where i have given "releasecode = p1".. if yes than than it will go for getting approval from p1 , in this activity i am using standard rule 157.
The main thing is 1). i am not getting how to fetch agents using standard rule. 2)and how and where to define next level of approval for both stock and non-stock.
means by using condition step in the starting i am dividing workflow in two parts stock and non stock but how to proceed next.
i am really confused. should i use rules or write my own methods. please if anybody has gone through the same scenario than please suggest some points. i will really appreciate the help.
Kind Regards.
Himanshu

Hello HIM Joshi !
                   Include the task TS00007986 and all its branches and in a loop and loop around it for two times.When the loop goes for the first time, it should pick the first agent and during its second iteration, it should pick the second agent.
                   To accomplish so, In the same loop, but before the above task , include a background task which should populate the agent ids depending on stock and non-stock details and pass it to the the task TS00007986
                   That's all.
Regards,
S.Suresh

Good book for Oracle 9i Performance Tuning

Hi Can anybody suggest good book in Oracle 9i performance Tuning (All the Tuning methods and I/O, tuning Memeory Tuning .......)
I done my OCP 9i and I worked as Junior DBA and now I want to concentrate only on Tuning.
Thanks
Venkataragavan.S

If you are looking generalized, not exactly 9i performance, but,good in terms of oracle tuning, I would suggest the below apart from the above given,
Oracle Performance by Cary Milsap and Jef Holt
Jonathan Lewis, 'Practical Oralce 8i', dont go on 8i name.
Sql Tuning by Dan Tow
Jaffar

Cook book for business package:compensation specialist and HR connectivity

Hi all,
Have any of you configured Business packages compensation specialist and Hr connectivity, do you any cook books or Documents about how to configure it.
If so please send it to my ID:[email protected]
Helpful docs will be much appreciated.
thanks in advance.
Regards,
Vivek

>
Siddharth Rajora wrote:
> Yes these are the only versions available, no changes have been done
> so you can use it for ehp4
>
> 'BP Compensation Specialist 60.2'
>
>
> there was no plans to release a new version of Business
> Package for Compensation Specialist for ERP 6.0 (ECC 600)
>
> PA-EC is the successor product in ECC 600 and as you have
> seen this BSP works from PA-EC menu (or as a standalone URL)
>
> MSS ECM is the corresponding delivered
> functionality from the Portal side but provides
> specifically manager/employee ECM related actvities and as you have seen
> may not include exactly the same functionality as BP Comp Specialist
> - this is because product area PA-EC has
> original ownership of this BSP, we at EP-PCT-MGR-HR support
> provide support primarily for problems encountered using
> Business Package (BP) for Manager Self Services (MSS) and the
> ECM workset delivered with this BP
>
> you can refer for more information here
>
> http://wiki.sdn.sap.com/wiki/display/ERPHCM/Initialstepsin+MSS
HIi Siddharth, thx for confirming, this was my guess.
It also appears that much of the new ECM analytics integrated with BW in EP5 is being moved under the TMS 1.51 (Talent Management Specialist) Application.
If they are moving ECM reports there, I don't understand why you would not just incorporate all the BSP links / folder structures so that 'BP Compensation Specialist 60.2' could be officially retired.

Beta drivers for Battlefield Bad Company 2 and fixed cracking sound

Hi! Can anyone tell - Is there a new beta driver - newer then 2.8.003.
Creative can you make newer drivers with BFBC2 support. The sound in this game is amazing. Cheers

I guess that isn't the problem with X-Fi. That's the game itself. Not only people who have X-Fies are crashing. My friend has onboard Realtek codec and he experienced that problem. You can also check the BFBC2 forums to see what I'm talking about. So stop screwing your driver settings and system. Wait for proper patch. Meantime I've got a solution which helped me so you can also try it. The idea is to forbid the game from running on all four CPU cores. Dunno about 2 core processors. I think the performance hit will be very serious if the game will be running on a single core.
1. Launch BFBC2Game.exe from game's directory (not the?BFBC2Updater.exe, as usual). Wait till you get into main menu (skip intros etc).
2. Press ALT+ENTER to go to window mode (if you're going to alt+tab, get ready for pain in the @$$ cause the game will try to bring back its window after every switching of window's focus).
3. Launch Task Manager, navigate to "Processes" tab and find BFBC2Game.exe in the list.
4. Right click it and choose "Set Affinity...". Uncheck one of the cores (I usually disable CPU 3). Press ok.
5. Close the Task Manager, switch to game's window and press ALT+ENTER to go fullscreen again.
6. Log-in, connect to a server and try playing.
Hope it'll help. though I'm not giving any promises

Code inspection, analysis, and fixing

This question was posted in response to the following article: http://help.adobe.com/en_US/flashbuilder/using/WSe4e4b720da9dedb5344c6f711358acdda1d-8000. html

In my experience "Find references and refactor code" are Eclipse capabilities, not a brand new thing.. as far as I know.

Steve's Muvipix Book For Adobe Premiere Elements 9 and 10?

I bought a new pc with adobe p elemwnts 9 preinstalled. Then I bought Steves muxipix 9 . ADOBE PE 9 was not stable so hp sent me Adobe 10. Ok here is my question do I need to up grade my muvipix 9 to 10 ? are they close enough to still use the older book? Thanks Rick

Try the Premiere Elements forum, since you'll get more opinions on a PRE book there:
http://forums.adobe.com/community/premiere_elements
Good luck!

I have been reading epub books for the past few years and all of a sudden they have stopped working. I downloaded the 3.0 version of adobe digital editions but now i am unable to download any books into the adobe digital edition and my kobo isnt seeing a

any ideas of what i can try?

Please authorize ADE 3 with same credentials that you used with older version of ADE

Performance analysis with SE30

Hi,
I want to know about performance analysis with SE30 How much should be percentage of DATABASE SYSTEM and on ABAP how to reduce the load of system and which is more critical load on DATABASE OR abap, also for my report i have checked with different parameter according to the posting period which i have selected the graph is changing
regards,
zafar

There are a variety of materials on the subject of Performance Analysis and SE30. If you'll take the time to search the blogs and articles in SCN, I'm confident you'll find something useful...
Percentages vary, depending upon what we're doing, which tables we're using, how many tables, etc. So, there are no hard and fast rules about what the percentages should be (so far as I know). Generally, very high database percentages can predict long runtime if one is obtaining a large number of data rows, and suggest (to me, at least) the need to review the select statements within the ST05 trace tool, to be sure I'm utilizing index and doing so optimally for each table I'm reading, that I'm not bypassing SAP buffers if not necessary, etc.

Analisng and fixing all clips in a sequence

I am sending a sequence from FCP6 to STP2 and just as in the FCP timeline the track has all the clips showing. I want to analyse the clips and fix but can only do one clip at a time which is annoying. Is there anyway to select all the clips and do one analysis and fix as opposed to many?

You need to ask this in the Final Cut Studio forum
Final Cut Studio

BI - Purchase document's item level contion type and correspondingvalue.

Dear Experts
I would like to know - Is there any standard data source in BI for item level condition type and values of Purchase order document. These are available in SAP R/3 . Shall be grateful, if you could kindly help me out
Kind regards - P.L.Dey

Hi,
Actually, These informations are stored in Characteristics and Key Figures i.e., CVCs(characteristic value combinations)
When you do Purchase Order,
These Values will store in PURCHIS ( Purchasing Information Systems) and that to, in Open Information Warehouse Data base in the form of CVCs. (In Particular Table forms)
EG.,
Values are stored in Key Figures (Eg., Number....)
Names are stored in Characteristics ( Eg., Purchase order..)
in CVC, we can easily see, Number of purchase orders for vendor, or so.....
Hopes it is useful
Thanks.

Books For DB level Performance Analysis and fixing.

Similar Messages

Maybe you are looking for