Books Unable to Resize

Some of my books have the fit double pages and fit single pages and custom fit, but many others do not. When I am reading the books without that option, I am unable to see pages of graphics(pages with maps on them), only half the page is shown.This happens even in full screen mode and when I attempt to make the window larger and make the text smaller. It doesn't effect the graphics and my ability to see the entire page. I am running DE on Mac OSX.6. Any help, please?
Thanks,
Rocky

Menu>>Show Bounding Box was the problem. Thanks for trying to help.

Similar Messages

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

Unable to resize IClock plug-in which extends java.awt.Panel

I am using an ibm IClock plugin(a javabean) on a JToolBar-this is a clock.The javabean consists of a Canvas on a Panel. I am trying to make the two IClocks smaller so that I can fit a panel to show the date and so that the clocks and date panels are the roughly the same size.
I am unable to resize the Panel. I have tried the following:
1- overriding setPreferredSize. Not sure how to write this code- was getting compilation errors when I did this
public setPreferredSize()
return new Dimension(x,x)
2- invoking setSize(x,x) on the Panel
3- invoking setBounds(x,x,x,x) on the Panel
After Steps 2 and 3 I do a system.out.println and the values I set are returned from the Dimension object. However, the size does not change in the GUI.
I think it may have something to do with the way the layout managers work - and whether they decide to take the preferredSize. From what I can see on the forum, this is a hazy area where short of writing your own layout manager you can't control the LayoutManager very much. But I may be completely wrong, and it may be all much simpler than this.
I am tearing my hair out over this! The only option I can think of is to use an IDE and use a tool to resize the componets. This is the last option. Any ideas would be greatly appreciated.
Thanks
Soraya

Sorry I may have confused you.Actually I understood you perfectly.
The JToolBar does not need to be resized, the IClock
needs to be resized. The IClock is a Panel.
So what I should do is override getPreferredSize() in
class IClock/Panel?That exactly what I meant, and getMaximumSize() too.

Unable to resize window to fit screen

I am having an issue in which some of the windows from a variety of applications no longer fits on my screen, and I am unable to resize the window because the handle for the window (that I would normally click on and drag to resize) is located in an area of the screen that is not currently visible...
Specifically, when using firefox, if I try to add a new bookmark, the add bookmark window appears and the bottom of the window is off the bottom of the screen (even with the top of that window appearing all the way at the top of the screen. Another instance occurs when using a Photoshop plugin called noiseware, in which the top and bottom of the plugin window appear off the screen, thereby making it impossible to access certain features and functions of the plugin...
I have tried trashing the preferences for each application and for the plugin in hopes that that would help, but it does not...I have also attempted the change the resolution of my monitor, but its alread as large as possible...
Does anyone have any suggestions as to ways in which I can go about resolving this issue? Any help would be sincerly appreciated. Thanks!

I am having an issue in which some of the windows from a variety of applications no longer fits on my screen, and I am unable to resize the window because the handle for the window (that I would normally click on and drag to resize) is located in an area of the screen that is not currently visible...
Specifically, when using firefox, if I try to add a new bookmark, the add bookmark window appears and the bottom of the window is off the bottom of the screen (even with the top of that window appearing all the way at the top of the screen. Another instance occurs when using a Photoshop plugin called noiseware, in which the top and bottom of the plugin window appear off the screen, thereby making it impossible to access certain features and functions of the plugin...
I have tried trashing the preferences for each application and for the plugin in hopes that that would help, but it does not...I have also attempted the change the resolution of my monitor, but its alread as large as possible...
Does anyone have any suggestions as to ways in which I can go about resolving this issue? Any help would be sincerly appreciated. Thanks!

Unable to resize the Edit window in Premier Elements 11

I am unable to resize the premier elements edit window - it just leaves a trail of images of the edit window on the screen when I try to make the window smaller - It doesn't refresh the desktop behind, no problem using and resizing window in Photoshop Elements 11 installed at the same time and also the organise window is resizeable OK just the edit window a problem - any ideas - I am using Windows 7 64 bit?

Full -Computer spec is - Windows 7 64-bit, 8Mb RAM, Processor Intel Core i5-2400 CPU @ 3.10 GHz and graphics card AMD/ATI Radeon HD6570 2Gb RAM - Updated windows and Graphics card driver. When rebooted my windows had gone into an Aero theme and worked OK - but putting back to windows classic - problem returned i.e. Organise editor OK but Video Editor with just New Project and no media added resizing window just leaves a trail around the screen. Put back to Aero theme and now OK again. Tried going into System properties / advanced / visual effects / Show windows contents whilst dragging - and turned off but still did not work with Windows classic theme.
So don't know why it is happening but it is at least a work around - thanks for your help.

Unable to resize a partition.

Hello everyone
I `ve recently created a new partition on my MacBook Pro running OS X 10.9.4, and that was for install the public Beta of Yosemite, then i decided to delete that partition with Utility disks, then that space now appear gray, but the problem is when i tried to resized the partition dragging the lower right conner above, and then i clic "apply", nothing pass, So i was unable to resized the partition.
Could someone please help me .
here is a picture of UD.

As I suggested on your first post of this topic:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
After you have installed OS X you can use Boot Camp Assistant to create a new Boot Camp partition for Windows. Do not attempt to use Disk Utility or Boot Camp Assistant to create a third partition. You can have at most two partitions: OS X and Windows. You created a third partition which you then removed, and that is why this problem arose.

Am unable to resize fonts, images, or anything that is related to using numerals. How can this be fixed??

Am unable to resize fonts, images, or anything that is related to using numerals. How can this be fixed??

In full Editor, go to Edit>preferences>General. Look for this:
Click on it, close Elements, relaunch.

Why am I suddenly unable to resize OR resample my photographs in CS6?

Why am I suddenly unable to resize OR resample my photographs in CS6?

What color mode is your document in?
Some modes (Indexed and Bitmap) don't support resampling.

Framemaker v11 Books unable to clear all change bars from documents

I have converted all Framemaker v10 documents to v11 by opening and saving. However when opening the Book v11 for these documents and applying the 'clear all change bars' option a book error log message advises that the documents cannot be opened as they are in a previous version! When performing the same function on the individual documents outside of the Book this works fine. But unable to clear all change bars within a book when selecting all the files in one go. Is there a bug with Books in v11?

My version is FM11.0.0.380 so I will install the patches. I did open all documents up from within the book and then individually saved them, then i applied the 'clear all change bars' and this worked. It just does not seem right that you can clear the change bars from the documents from outside the book but when you try it from within the book it says cannot open document as it was created with a previous version. I have managed to get it working but would be good to know if it is a book bug or not. I will try it on another Book when I have upgraded to the latest patch.

IPhoto Book "Unable to verify credit card information please try again"

Can anyone please help me?
When trying to order an iPhoto book I keep getting the following message:
"Unable to verify credit card information please try again"
-One click ordering is enabled
Would appreciate someones help on this.

Last year, and again this year, I was able to buy one iphoto calendar but then when I wanted to buy another to send to a different address, i kept getting the same error message, no matter how many times i double checked and re-entered my billing info. i finally figured out what to do (if i remember correctly, this came from apple customer service after many frustrating back and forths last year):
- go to the "buy calendar" window
- click "account info"
- click "edit shipping address"
- add a new address (the one you want to ship to)
- make that new address the default address
- delete all other addresses
- then buy it
it's really clunky, but it works for me. i'm assuming this will work for iphoto books, too.

IPhoto Book - unable to complete purchase

I successfully completed the compilation and purchase of a nice iPhoto book for a relative's wedding last week. Now I've finished making a second one and for some reason I'm unable to complete the purchase. It uploads all the pictures and compiles the book, then keeps taking me to a pop-up which says "your account information has changed". I have verified my account information four times and it then keeps circling back to "Buy Book" and starting the process from scratch all over again but won't give me the ability to complete the transaction.
Beyond frustrated!!

do not jsut verify your informtation - go to your Apple store account and re-enter all of it and save it ad then ry again
also preview your book prior to ordering -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Mackintosh user - unable to resize screen using pinch

I am unable to use the pinch feature on my Mac to resize the Firefox browser. I read the community blog about another Mac user who experienced the same problem and his solution is beyond my expertise. Nevertheless, I would really like to use Firefox instead of Chrome or Safari because I enjoy the independent community branding of Firefox. However, without the simple ability to use a primary feature of the Apple computer to resize the browser makes it a more unlikely transition. I have never had resizing issues with Chrome -- why is it so with Firefox? And why is it so laborious to accomplish?
Please help. I really want to a sole user of Firefox. Thanks

Hi, I think that works only with safari alone.

Transfer Address Book - unable to locate object push server

Well, I've seen this issue raised on many forums but no answers forthcoming from either RIM nor service providers - in my case, Swisscom.
The environment & issue:-
unit: Blackberry Pearl 8100 / firmware just updated to v4.2.1.94 (platform 2.3.0.77) - enterprise server activated
Car: BMW 330 new off the line Nov 2008
BMW notes:- according to their literature, the Pearl and this level firmware is fully supported
Before the firmware upgrade...
could make Bluetooth connection but if "transfer address book" was enabled, the link would drop every 30 seconds
After the firmware upgrade...
Bluetooth connection established and stable - even with address book transfer enabled but:-
* address book is not (automatically) transferred
* attempts to force a transfer results in the message (on the Pearl) - "unable to locate object push server"
This seems to indicate the pearl is looking for an enterprise server in the car - why, I don't know
Would be great to break this impasse

I had this problem on my own (I have a car with Bluetooth -Mercedes W204- and a BB 8820) and I was struggling with this for several months. I look everywhere on the internet with no answers and I found a lot of people with the same problem. However.... I think I FINALLY HAVE THE SOLUTION:
Here we go:
- On a bluetooth connection you have, basically, two components.
- You have the BB device and the car device. The key is that the car that is able to receive address book transfers has TWO services:
1) hands free unit
2) Objects Push
The thing is that this TWO services cannot work together AT THE SAME TIME. Normally, you have the car device activated as a "hands free unit", SO, when you attempt to transfer the address book, you receive the famous message "unable to locate object push server".
The one million dollar question is "how can you switch to "Objects push" mode ? Answer: go to Bluetooth, select your car device, open Options and press for "update list of services" and.... voilá!!! the description "hands free unit" will change to "objects push". At that time you will be able to transfer contacts (obviously setting your car device -in my case- to receive those contacts).
Be careful: once you finalized the transfer, you must deactive the car device for receiving contacts and, on your BB, update again the list of services to get your "hands free unit" again because, if not, you were possible will be having problems on connecting over the bluetooth (another common problem I saw in several posts). And that´s it. It worked for me so, pleae try it and Enjoy!! By the way, you don´t need to update your OS....
Cheers from Argentina. Diego

Evilwm unable to resize windows

Hi all. I just recently switched to evilwm. To my knowledge <ALT> + Right Click should allow me to resize windows... but i am unable to do so. I have also tried to right click on the border, nothing. so yeah, does anyone have any suggestions? is there a file where i can modify these key bindings? thx!

In cwm (which is similar to evilwm) it’s alt + middle click. I see the wiki says alt + Button2, which may mean the same thing.
As for editing keybindings, cwm has a config file, but near as I can tell evilwm does not and is not reconfigurable.
Last edited by Anthony Bentley (2011-03-23 15:39:02)

Disk Utility unable to resize drive

Hi,
I have been trying to resize my boot partition so that it fills the remaing space, however Disk Utility won't sucessfully complete the operation. I have tried the following:
Normal boot - in Disk Utility drag the botton right of the partition to fill remaining space and tap apply. Disk Utility reports that operation has completed, however the partition graphic bounces back to it's previous state.
Boot to Lion Recovery HD - Repeating the above steps, Disk Utility reports an error trying to unmount the drive.
Download Lion Recovery Tool and Boot from USB - Repeating the above steps, Disk Utility reports an error trying to unmount the drive.
I have also tried to use iPartition, but have bot been able to resize the drive. I have a Boot Camp partition which is working fine.
Has anyone had a similiar problem?
Mark

Hi,
No I haven't got a solution for this yet - I'm probably going to have to drop and rebuild the boot camp partition.
Mark

Books Unable to Resize

Similar Messages

Maybe you are looking for