Boomy sound from apple tv

Can somebody please help?
I have just purchased ATV and finally got it synced (after 3 days of port 3689 error msg) only to find that it sounds shockingly bad, very boomy and not clear at all.
ATV is connected to samsung tv via HDMI and then to samsung home cinema via HDMI. I have tried just playing through the tv testing different cables-same result, rubbish.
Tested sound system and tv using DVD and CDs and everything fine. Attached ipod via component cables, clear sound.
Is there any form of equiliser built into ATV that I've missed?
Only had ATV 3 days and I am getting very close to returning it so any suggestions would be greatly appreciated.

It should not sound boomy.
In fact, sat here listening to a couple of iTunes LP albums over optical to the hi-fi and they sound superb, very analogue warmth/depth to them (Muse - The Resistance, and Peter Gabriel - So+).
The analogue output via stereo jacks isn't the best but all the HDMI and optical will do is relay the digital audio for conversion by TV or amp.
Have a look to see if Sound Check is on in the AppleTv audio settings - if it is turn it off and try again - this consistently makes audio sound awful IMO.
AC

Similar Messages

  • How do i use my apple express speakers as the sound from apple tv?

    how do i use my apple express speakers as the sound from apple tv?

    Welcome to the Apple Community.
    You can't with the Apple TV 2 or 3, with the Apple TV 1, you can choose them from the Airtunes option in the settings menu.

  • I get no 5.1 surround sound from apple tv2 for any media

    I have apple tv2 and think its great. However I have it connected to my ken wood surround sound system and only get sound from 2 speakers for all media including movies, netflix, my iTunes library and airplay from my iPhone or ipad.
    There is no problem with connections and the same fibre optic cable supports 5.1 in the same port of my ken wood when it it connected to my DVD player.
    My Dolby in settings is set to on.
    Any suggestions

    You really need to specify exactly what imac you have.  Current ones I believe have an optical (out) and in and I think that can be combined with usb to produce multi-channel sound.  But it's just an academic exercise if you don't have the optical.
    Also, google "5.1 audio on imac" for lots of hits on this topic.

  • Why the sound from Apple tv2

    Why is the sound from my Apple tv2 so much louder than the sound from the tv/pvr; both are connected with optical cable to the same amplifier.
    GH

    Because the 2 manufacturers of the device have their own ideas of where 0db should be. Does your amplifier offer input trim? if so use it.

  • Sound from apple tv

    i got sound when i play movies, but, no sound when i play my music from my itunes thru my apple tv.

    Check settings/airtunes and ensure you don't have another speaker selected and the tv speakers set to off.

  • No 5.1 sound from Apple TV

    Hi,
    My Apple TV (3rd gen.) is connected to my Denon AVR-X2100 receiver using HDMI cable, but there is no visible input audio signal when I press the "Info" button on the receiver remote control. It can play sound, but the default sound is only 2.0 instead of 5.1 and yes, I can "distribute" the sound into all speakers by using the All Zone Stereo(but does not distribute the sound into the subwoofer), but that is not the proper 3D sound, especially when I watch some movie, because then it just plays the sound evenly from all the speakers and not as it supposed to be (for example when someone drops a knife in the kitchen somewhere on the left, it usually goes from the left speaker and so on, but in case of All Zone Stereo it comes from all the speakers evenly).
    Interesting thing is that in case of PS3, which is connected to the receiver in the same way as Apple TV, the receiver can fully recognize the audio input signal and when I play the same movie via PS3, the sound is perfect 3D, no need to use All Zone Stereo, all 6 speakers work perfectly.
    I followed all the different advices that I found on the Internet, the sound setting in my Apple TV is as it is supposed to be for 5.1 and same in case of the receiver.
    If necessary, I can provide screenshots of the receiver and Apple TV settings.
    Any other possible ways that might solve this problem?

    What content are you playing and expecting 5.1 from?
    iTunes Movie trailers are stereo only, most modern movies from iTunes will have 5.1 as well as stereo, and some streaming services content will have 5.1, some won;t it will vary from title to title.
    In AppleTV Settings for Audio and Video change Dolby Digital to On which should force it to output 5.1 when available.
    Wise to check the amp's configuration for that input but I expect you have done so.

  • Sound from Apple Earpods only comes from the side speakers?

    **** i normally sometimes use my Apple Earpods but today i have realised that the sound only comes from the side speakers, i've cleaned the other speakers however that doesn't help

    There is only one speaker for each ear. See here.

  • I cannot get sound from apple TV. Has anyone had the same experience and what did they do?

    Hi, I recently bought Apple TV 2nd gen. I can, after a while, get access to my library but when I start to play movies I cannot get sound. Has anyone had a similar experience? If so what did you do to overcome the problem?

    Do the movies contain both stereo and 5.1 audio.
    Have you tried toggling the Dolby Digital setting or the Audio Output setting.

  • No sound from apple tv when using airplay

    Hey,
    So here my problem, when I use airplay from my MBP(or iPhone)to my ATV2 audio will dropout. The song stil plays in iTunes(I can tell by the minute count) but no audio comes through my ATV2. Im using an ATT Uverse Cisco router, and all software is up to date.
    Its a frustrating issue, any suggestions?

    I occasionally have the same problem,I have found if I unplug the app tv it now works ok sometimes I have to hard reset the ipd iPhone for this to work in fact it did it a few hours ago and it's now working again.I hope this helps

  • Can anyone help with this issue.... intermittent sound from apple tv

    Can anyone help with this issue?..watched the trailer of a movie with sound, then downloaded and went to watch it, but no sound and this message was displayed:"an incompatible audio signal has ben received.check the output device" tv is a sharp aquos

    I don't know if this will help but have you tried switching the audio output to 16-bit? On the AppleTV, click Settings, Audio & Video, Audio Output. The two choices are "auto" and "16-bit". Good luck!

  • What is causing sound from Apple TV to cut out?

    I have switched to different HDMI input on the television and the problem moved also. No problems with cable in input. 

    Welcome to the Apple Community.
    Check that the wifi channel is set to the same channel as on your previous router, also check the multicast rate is identical.
    If the problem persists, you might also want to see if netgear have a forum or a help number and ask there.

  • HT4437 My Apple Tv will only mirror the sound from a movie I mirrored from my computer, but not the picture.How do I fix that?

    My Apple Tv will only the mirror the sound from a movie I mirrored from my Macbook Pro. How do I get the picture?

    Do you have a valid credit card associated with the account? If so then I would contact iTunes

  • Don't have money for new tech or headphones. I want to watch a movie from my laptop via AirPlay (watch a movie straight from Apple TV), but hear the sound on my headphones attached to my MB Air.  Is there any way to do this??

    I don't have money for new tech or headphones. I want to watch a movie from my laptop via AirPlay (watch a movie straight from Apple TV), but hear the sound on my headphones attached to my MB Air.
    Is there any way to do this??
    http://superuser.com/questions/853821/watch-a-movie-straight-from-apple-tv-but-h ear-the-sound-on-my-headphones-on-my

    Thanks for your help.  Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV.  I guess I'm just stuck with using iPhoto on my MB Air.  Thanks again.
    paul

  • Can't get sound on a movie purchased from apple tv

    Hi , can't get sound on a film from apple just purchased ? John

    Welcome to the Apple Community.
    Try adjusting the audio out and/or the dolby digital settings.

  • Can I stream the sound from a video running on my apple tv to my wireless speakers using airplay?

    I have living room speakers connected to an airport express and available via airplay from my computer, ipad2 and iphone which is great for playing music. My question is, can I use those speakers to play sound from videos running on my apple tv? For instance if I use airplay to run a video on apple tv from my computer or iOS device, can I have the audio play on my speakers connected to an airport express? It would be amazing to be able to use the speakers simultaneously with the apple tv as they are both on the same home sharing network. Possible?

    No. But, are your speakers only connected to the AE or are they also connected to an amplifier?
    You would need to use a Toslink cable to go from the Apple TV to the speakers/amp.
    I don't use this or know a lot about it, but it is wildly popular, inexpensive and may be of help:
    http://www.rogueamoeba.com/airfoil/
    Message was edited by: bobbyco57 to add Airfoil info.

Maybe you are looking for

  • When merging workspace I get ORA-01403: no data found error in WMSYS.LT

    Hi, I am investigating an error in a remote system with very little info to go on apart from a stacktrace! This is what it says: java.sql.SQLException: ORA-01403: no data found ORA-06512: at "WMSYS.LT", line 6028 ORA-06512: at line 1 The context is a

  • WL - MQ bridge in Exactly-Once mode not working

              I cannot get a message bridge from an MQ queue to a JMS queue to work in exactly           once mode. I followed the directions in the 'Using Foreign JMS Providers with           WebLogic Server' whitepaper (It works fine for atmost once).

  • Regarding Enhancing LO Data Source.

    Hi is it possible to enhance LO Data Sources like 2lis_02_bf or 2lis_03_itm etc??

  • How to connect Android CDC driver on OSX with ACM and ECM data interface

    I need to help connecting My android CDMA modem to OSX first I have attached some Picture on Windows. please see the picture as below. I want to connect to Redline box port same as on the OSX. but my OSX(Mountain Lion 10.8.2) had found 2 port SAMSUNG

  • Is it an error in documentation?

    Hi all, I'm not so new to Java, but today I stuck with problem below: I've found at http://java.sun.com/docs/codeconv/html/CodeConventions.doc9.html the example of ++ operations usage which has following operator: if ((c++ = d++) != 0) { which doesn'