Boot a Macbook pro with a damaged screen with my MacBook

Is there a way to start a Macbook pro with a damaged display by hooking it up to my older MacBook?
I want to see if the rest of the laptop is in good condition before sending it out for a new display.

If you're able to connect them with a FireWire or Thunderbolt cable, do so, start up the MacBook Pro with the T key held down, and the other computer with the Option key held down. This will only reveal information about the MacBook Pro's internal drive.
(116091)

Similar Messages

I am dual booting my mackbook pro with windows 7 64 bit. Yesterday it started locking up at the disk drive selections screen, when you hold down the "option" butting when powering on. I have been searching all morning, and so far nothing. Thanks. :)

Hey folks,
I have been using bootcamp for months now with windows 7 64 bit, and its been fine, yesterday while I was rebooting to do some gaming, at the hard drive selection screen when you boot holding the "options" butting down, it locks up when I select the windows drive and just sits there for ever. It doesn't throw an error, it boots fine into Lion.
I searched all morning and didn't find anything, was hoping that someone might have an idea.
Thanks in advance

Search again. Microsoft has tips on what to do and Windows has a number of features
system restore points
automatic system repair using the Win7 DVD
system restore image creation
Just like you would with OS X Lion and Lion Recovery and Repair
Use WinClone 3 www.twocanoes.com $20 to make an image just like you would with Disk Utility Restore or Carbon Copy Cloner
rollback to last known good boot check point
rollback a driver or program or any changes
clean out temp files
clean registry
chkdsk
https://discussions.apple.com/people/The%20hatter?view=bookmarks

Is it possible to upgrade the Mac Pro with SCSI/SAS drives?

Hi guys I am considering to move on to a Mac Pro from my old PC.
The Mac Pro enclosure is quite unique in its hard drive holders as no cables are used and all drives are connected with a plugin mechanism.
So I am curious if that will allow me to upgrade to a SCSI/SAS storage system which requires cable connections between drives and the SCSI/SAS card on the PCI-E slot. I dont know if this will be possible with the Mac Pro enclosure.
Has anyone tried to do this？
Btw is there any Ultra320 or SAS(preferably) interface card available for Mac OS X?

The connectors for SATA drives can be used with SAS drives. However, the controller needs to be SAS compatible. I have never installed a SAS drive in the Mac Pro bay to see what happens. If some one has a SAS drive and wants to try this I would be interested in the results.
My guess is that the Mac Pro would not see the drive.
Areca sells the Mac Pro PCIe bootable ARC-1680 SAS controller in several configurations. This controller allows the user to utilize SAS or SATA hard drives connected to the card. The ARC-1680x comes with two external mini SAS connectors that can support eight direct connect hard drives or up to 128 devices (in theory) when used with SAS expanders.
The ARC-1680LP has one internal mini SAS port and one external mini SAS port. I looked at the Mac Pro internal SATA connectors and they can unscrew from the frame but there is only about 1/2" of clearance in that area of the case. In addition, I would want the hot swap bays to still operate and I did not see an easy way to patch into the existing SATA connectors. It would be nice if the Mac Pro factory connectors used snap on SATA connector on the back of the backplane so that users could interface the 4 SATA bays with an internal PCie controller. However, its hard wired in the existing configuration. With the new Mac Pro PCIe RAID 5 card on the market there must be alternative connectors that allow this type of installation to work properly.
Based on the ease at which the Areca SAS controller can be added as an external using the ARC-1680x I went with that option. I am using it with eight direct connect SATA hard drives now. I plan to expand the storage by adding a SAS expander in the form of a hub or an enclosure with SAS capabilities. I have been looking at a 16 bay SAS enclosure but I am not sure how loud it will be
Details on the ARC-1680 can be found here:
http://www.areca.com.tw/products/pcietosas1680series.htm
Its very cool to have SAS or SATA capability along with a bootable card that can support tons of hard drives and RAID levels 0, 1,1E, 3, 5, 6, 10, 30, 50, 60 or JBOD . I booted the Mac Pro with a 2TB Mac OS X 10.4.10 RAID 6 volume and ran Xbench. It shows a 400MB/sec. hard drive setup and raises the overall Xbench score substantially.
While I doubt I will boot the Mac Pro from the RAID 6 volume much, it is very cool that that function is available. This is the only PCIe host adapter I have found with boot capabilities besides Apples new $999 4 port SATA internal card. SAS has lots of expansion capabilities. Users that want pretty much unlimited hard drive connectivity will enjoy the new ARC-1680x.
Have fun!

How do I back up my MacBook Pro from an external hard drive if my macbook won't boot up from the white start up screen? HELP!

I went to the Genius Bar a week ago, and the guy helping me there was nice enough to help me save some money by telling me I could replace the bad hard drive my MacBook Pro had by myself. I bought everything I needed (hard drive, screws, external hard drive) and my computer won't boot past the white start up screen. It doesn't even show the Apple sign at the start up screen. How do I back up my computer so I can save all my music, school files, etc.? Could really use someone's advice on what to do! Thanks!

Ok, to be sure I understand what's going on. You were able to boot the Macbook from the existing "damaged" internal drive, and it has been backed up to the internal.
If that is correct, your internal drive is working. Just to be sure, try booting with the R key down. Then run Disk Utility to repair the internal drive. That drive may in fact be useable.
You should be aware that you cannot boot the MBP from a Time Machine back up.
Please post back so I am sure I am understanding the situation.

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

What may have happened is an error and a kernel panic, filling up the logfiles.
What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive.    You'll probably want an external drive from http://www.macsales.com/
And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.
If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
If no such software is installed, your RAM probably has failed.    Run the hardware test that came with your computer, by booting with the 'D' key.
If nothing shows up there, it can still be the RAM.   Especially if you've seen any 4 language screens telling you to restart.
Here's more on kernel panics:
http://www.macmaps.com/kernelpanic.html*

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Serial Number (system):          7302300GANE
Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State:          Enabled

EDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!

How to make boot disk for MacBook Pro with Mavericks pre-installed

Hi -
I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0). I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion. In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk. In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed). I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks. Thanks very much for any help anyone can provide.
Shelly

Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Screen burn-in/ghosting on MacBook Pro with Retina Display

I have had my 15 inch MacBook Pro with retina display for a little over a year now I and I have started to notice that when I am on a mostly white webpage for a few minutes, and then switch to a darker page, there is an obvious screen burn-in/ghosting. Is this something that can be fixed? It's not accidentaly damage, it's a manufacturing problem.
My warranty recently expired. Will I have to pay for repair costs even though this is Apple's fault and not mine? If so, how much could I expect to pay? Is there any way to extend my warranty? How much does that cost?

Just got my second MBPR 13, and it cames again with the not welcome and clear "feature" of IR
When I try to check for the display model with he command
ioreg -lw0 | grep "EDID" | sed "/[^<]*</s///" | xxd -p -r | strings -6
I got this output
@.`0 6
Color LCD
Later I checked it in the colorSync utility
Manufacturer: 00000610
Model: 0000A020
Manufacture Date:CD238700
Not sure if its Samsung or LG, but honestly I dont care, I just want a not faulty display in my new expensive laptop.
Now Im thinking to return it again and Im really paste after waiting for almost a month to receive this second and also defective laptop (I bought it in the online store, 1TB, 16RAM, I7).
Should I return it again? Im thinking that even if the 14 days expires, since I have the waranty,they fix it anytime within the 3 years apple care waranty.
Should I play the lotery?

HT201262 I have the gray start up screen that just keeps spinning. I have 'dubious permissions on file' I cant boot my MacBook Pro 15"

I cannot start up / boot my MacBook Pro (15"). When I power it up, all I get is a 'persistant gray screen' with that gear icon spinning under the apple.
I did run a 'safe boot', and saw that I had 2 possible errors that might be causing it:
1) 'lanchctl: dubious permissions on file. /Library/LaunchDaemons
2) 'lanchctl: dubious permissions on file. /etc./mach_init.d
Also, there was a line that said that my 'IPv6' was disabled ??
If anyone knows what I can do to fix this, I would be very grateful. All my songs and videos and pics are on my mac,and I have had it since 2007.
Thank you kindly,
Gino
[email protected]

Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao.

Post-Lion Macbook Pro with newly installed Hard Drive, but it won't boot up

I just bought a Macbook pro with all the stock specifications and it boots up fine and everything is great. However, when I tried to put in a new hard drive, the computer doesn't recognize it and it won't boot up (i.e. the flashing folder sign with the question mark after a long gray screen). Since the new lion installs seem to be already pre-loaded onto the hard drive it doesn't automatically connect to the internet and download Lion from the server. I was told holding down Command + R would work (as well as C, and a few others), but it still doesn't read anything! It doesn't make any sense because in the pamphlet that came with the pro said that holding down Command + R would allow you to go to Disk Utility and partition the drive or whatever, but it doesn't seem to be happening.
My harddrive is a momentus XT seagate and I heard that those are compatible with Macs. One solution I heard is that I need to get a disk of OSX Lion (by downloading it onto someone else's computer and then removing the installer file), but that seems kinda tricky considering I don't know anyone's macbook that I can do that with. Are there any other options? Am I missing something? Please help!
-Josh

Can`t you put the other drive in and then burn a Lion Installation disk?

Two Macbook pros circa 2009 in our temporary household in Turkey suddenly failed to boot and got stuck on the grey screen. They were able to boot at the Apple store, but not when we brought them back to our apartment. Could this be a coincidence? A

Two Macbook pros circa 2009 in our temporary household in Turkey suddenly failed to boot and got stuck on the grey screen. They were able to boot at the Apple store, but not when we brought them back to our apartment. Could this be a coincidence? A

THank you Ogelthorpe. When my wife's computer I went on line to the site that you sent and tried everything But nothing worked. When my son came to visit and his MacBook Pro did exactly the same thing we became suspicious - too much of a coincidence. We took both computers somewhere else, out of our apartment, and they both booted. We ran disk utility on both, but the report in both cases was that there are no issues with the hard drive. Back in our apartment neither will boot up. My MacBook Pro is a later model with a solid state drive and it seems to work fine here.. I tried an external drive and it works fine. We think that this has something to do with some kind of magnetic interference in our apartment to which the 2009 drives are susceptible. It is indeed a mystery!
alf

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

try xxx - may work
_may_ work.

I have an older Macbook pro with a dvi output and I want to watch movies on my tv. I have a dvi to hdmi cable but the only image I get on my TV is my desktop background. None of my movie players with appear on the TV screen. What am I doing wrong?

I have an older Macbook pro with a dvi output and I want to watch movies on my tv. I have a dvi to hdmi cable but the only image I get on my TV is my desktop background. None of my movie players with appear on the TV screen. What am I doing wrong?

Hi Maryan,
Open System Preferences > Displays > select the window for you external monitor > click on the Arrangement tab and check the box next to Mirror Displays. It may be slightly different in Lion, but the idea is the same.

I have a macbook pro with lion os. and i want to connect it to my optoma dlp projector. when i connect through a mini display to vga adapter in MBP it detects as OPTOMA XGA but no image on the screen.

i have a macbook pro. i want to connect it to projector and i have a minidisplay to vga adapter. i could connect my MBP to benq projector successfully and for all other displays( Monitors). but when i connect it to optoma projector, MBP detects the display as OPTOMA XGA but nothing on bigger screen. i tried changing the resolution and refresh rate also but no changes.
In my office we got benq projectors , for that it is working very well.(plug and play).
and also i want to say that there is no problem with the optoma projector seems, because all other windows laptops are working well with that.
i was struggling with this since one month. i googled it could not find anything supportive for my problem. please help me regarding this. i am new to apple. i hope there must be genius around here.
thnak you

Rwogera wrote:
I couldn't transmit sound either, do i need another cable like Kim said? i mean it cant be transmitted through this HDMI port? as for me i have one of the latest mac pro with intel core i5..tnx
I need to know which MacBook Pro you have. Only mid-2010 and later MBP's transmit sound through MiniDisplay Port to HDMI. I have no information about the Mac Pro, so you might want to go to that Forum and ask there.

How to Install Windows 8.1 on MacBook Pro with Retina Display Using Boot Camp?

Hello,
I own a MacBook Pro with Retina Display and was wondering how do I install Windows 8.1 without an optical disc drive? I have bought the full version of Windows 8.1 and would like to partition it on my MacBook Pro. Could someone please help me out by posting step-by-step procedure or a video on how to do it? It is my first time partitioning the Windows operating system and would like to clarify with the community on this before I install it.
Thanks in advance for those who have helped!

Windows 8.1 is not yet supported by Boot Camp. The best way currently to install Windows 8.1 is to use a virtual machine like Parallels, Fusion, or VirtualBox. Installation instructions are on the Parallels, Fusion, and VirtualBox site.

Boot a Macbook pro with a damaged screen with my MacBook

Similar Messages

Maybe you are looking for