Boot and page load very slow after 2nd HD install

Good morning.
I recently added a second slave HD (80 GB with a OS X partition) to my beige G3 MT. I am using the original 9 GB drive as the boot drive. Northing else was changed.
Since that time, the boot time has increased significantly (2-3X pre 2nd drive).
Also, page load times have been increased with the Norton AntiVirus symbol being displayed.
1. What's causing the slow boot? Is the CPU looking at the new drive and applying Norton before the original boot drive?
2. Are there settings in Norton that might help?
3. Is it even worth continuing Norton use for this OS 9.1 machine?
Thanks for your time!

Hi, Bruce. NAV is probably scanning the entire new drive at startup, thus accounting for the major startup slowdown. And no, there's no good reason to have NAV installed at all. Your Mac doesn't need antivirus protection.

Similar Messages

LMS4.2.2 home page load very slow

Hi,
I migrated from windows LMS3.2.1 to soft appliance 4.2.2. i also set the gs.properties attribute to false. but, still the home page loads very slow. let me know if somebody experienced this and fond a resolution.
thanks,
Kerim

You're not the only one with this problem. There is a long discussion, with some proposed solutions, in this thread (and searching for "slow" in the Pages forum will bring up other threads as well).

WRT350n Firmware Update 1.03.7 - Web page load really slow after update

Well I updated my WRT350N with the new firmware, but now web pages load very slowly, and streaming video is even slower. Before the update it was blazing fast. I run a mixed network of wireless N and G. Both Wireless N connections connect at 200 or higher Mbps now, which is a great improvement.
Anybody got any ideas why web pages and steaming video run so slow now.
Also downloading files never goes above 30 kb/sec now.
I use comcast cable and downloads were so fast before.
Thanks in advance.

check the download speed and the streaming video when the computer is directly connected to the modem

Fired up my first Azure Website to host some virtual tours... ftp uploading and page loads super slow.

I upgraded my plan to BASIC... any idea why FTP upload are so slow? When I go to my pages, they are loading slowly too.

Hi,
First, please have a look at this article to see how to use FTP in azure:
http://blogs.msdn.com/b/kaushal/archive/2014/08/02/microsoft-azure-web-site-connect-to-your-site-via-ftp-and-upload-download-files.aspx, based on your description, the pages loading slowly, this issue only occur in your first time to loading? If yes, I
think it is normal, If you mean the initial request takes long and then any subsequent requests are fast, then that would be because you are hitting .NET apps cold start. Many .NET apps are slow to JIT and load all their .NET requirements, but once everything
is loaded, they are fast. If I misunderstanding, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

MSI 787-G46 slowly boot and not load DVD drive after bios 1.6 beta2

I used bios version 1.5 without any problem. Now I loaded bios version 1.6 beta2 and when the PC starts at the lower right corner of the screen appeared the letters A2 for about 10 seconds, which was not. So I gave back 1.5 bios and the problem persists. I also found that it has the effect that the system does not load DVD drive.

Quote from: makac on 23-October-13, 12:40:18
In the new bios 1.6 beta 2 added item: Patch SATA driver detection issue and add item to control.
I do not know where it's set in bios, can not do this problem?
I was having similar issues with this bios after enabling RAID the hard drive BBS listed my drives multiple times and wont let you change the order, also trying to boot to the operating system would just display some EFI shell. I can only assume we will need to wait on another release for a fix.
https://forum-en.msi.com/index.php?topic=173627.0

Why is web page loading very slow from microsoft Outlook hot links

Clicking on any hot link embedded in an Outlook email takes from 45-60 seconds to load. If I cut and paste the same link, loading is almost instantaneous. Are there settings I can adjust? IE8 used to be somewhat slow sometimes but never this slow with Outlook links.

What can I do to help this situation?
I've got fresh copies of OSX running on the macs that I mentioned, and I haven't specified any dns settings in the connection properties. I don't think dns has been specified on the windows machines either.
A DNS server has been specified on the router. Should I try removing this ip address and let the router look for it's own dns server?

HELP - Mac Pro Running Very Slow (After Additional RAM Installed)

I have recently upgraded my Mac Pro (2007) and increased the original memory up to 10 GB 667 MHz DDR2-F8-DIMM.
I also added an optical disk drive as the original would not play some of the newer DVDs/DVRs. Believe me, I'm not much of a do-it-your-selfer, but was encouraged by How-To DVDs on the net on how to install memory and the optical drive.
I am using Mac OS 10.5.8 and the original processor is 2 x 3 GHz Dual-Core Intel Xeon.
Just when I thought all was well, over the last few weeks my MAC has been getting slower and slower. Now, whenever I re-start or shut down, the Mac can take upwards of 5 minutes to come up. It hangs on the blue screen for what seems to be an eternity. Now whenever I use Safari or Firefox, the rainbow wheel spins and spins and this did not happen much before my "upgrade".
If someone would be kind enough to walk me through or educate me on how/why this is happening, I would be very grateful!
Sincerely,
Don

Did you try with just the new RAM? what was it, and you added.... 4 x2GB?
Riser A: 2-2-512-512
Riser B: 2-2-512-512
The ideal balance is symmetrical sets of four.
Clone your system and run Disk Warrior, reformat your fastest drive for system, and restore with SuperDuper. Or try starting over with clean install, would be useful as an emergency and backup, especially as it seems possibly overdue for some maintenance.
Make sure you have 30-40% free on disk drive, and add more if you haven't to separate scratch and data from system.
Run AHT and something like Memtest or Rember. Memtest you can run 40 concurrently each in its own Terminal window makes it go fast for even 5 cycles.

My mind 2014 macbook pro keeps freezing and is very slow after the yosemite update

HI my macbook 2014 model keeps freezing and it is very slow after i had updated it to yosemite

Why don't you try these: ( might or might not help, but it's worth a try )
See what you have loading on your login items.
Open up activity momitor, under All Procesess, see what's using most of your CPU resources (%).
Hightlight the one using the highest % on the CPU then click on quit process and see if that works.
Once you're done with that, go to Disk Utility and do a verify disk. After that, do a verify disk permission and repair if needed.
See if that helps you.

WIFI too slow after IOS 6 installed. SAFARI is loading very slow for burmese language website. Please help.....

WIFI too slow after IOS 6 installed. SAFARI is loading very slow for burmese language websites. Not only that....many other websites too.....Please help.....Don't expect that ENglish is only language we expect to view on IPAD......
Most websites are responding very slow with safari & many other broswers opera.........Too annoying IOS 6...Give me IOS 5 back...Tell me how.....
I am too angry with IOS 6.......My IPAD 2 & IPHONE 4S all suck after installing IOS 6..........
I can't believe "$600 billions " company released without testing on every devices with different wifi routers, applications on their store.........
Give me some ways to downgrade to IOS 5.1.1......

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

Need Help Ye,
boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow?

Please help: Course loads very slow and takes almost 100% cpu and 1.08 GB memory

The total page number is 129. We used Captivate 5.5. We have several Webpage widgets and a few videos. I tried to take out the web widgets and the videos, however, the course still loads very slow.
I would really appreciate if someone can give somve suggestion.
Thank you very much.

Captain Ibuprofen, we actually continued having the slowness problem in the past week. Then one of our developers found out the reason: as same as yours, caused by the page number widget. I wish we would have seen your response earlier. But yeah, so now we took out the page number widget and everything goes normal.
Also thanks for the tips on using the cpInfoCurrentSlide variable when adding the slide number. Thanks Andy.

Loading Page is very slow. Thread dump show "BuildCookie"

Hello, Folks,
I am developing a portal project, which have some pages and books. I find that my page is loaded very slow and I took three times thread dump, the following is the detail of thread dump. Could someone give me some hints that can help me to figure out what needs to be corrected in my code or design?
"ExecuteThread: '14' for queue: 'default'" daemon prio=5 tid=0x03bf5190 nid=0xe2
c runnable [44ce000..44cfd90]
at java.io.WinNTFileSystem.list(Native Method)
at java.io.File.list(File.java:915)
at java.io.File.listFiles(File.java:993)
at com.bea.wlw.runtime.core.dispatcher.AppManager.isExternalBuildCookieV
alid(AppManager.java:1080)
at com.bea.wlw.runtime.core.dispatcher.AppManager.validateExternalBuildC
ookie(AppManager.java:1137)
at com.bea.wlw.runtime.core.dispatcher.AppManager.ensureAppDeployment(Ap
pManager.java:655)
at com.bea.wlw.runtime.core.dispatcher.AppManager.ensureAppDeployment(Ap
pManager.java:575)
at jsp_servlet._framework._skeletons._default.__book._jspService(book.js
p:12)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:348)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispat
cherImpl.java:638)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispat
cherImpl.java:423)
at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.ja
va:194)
at com.bea.netuix.servlets.controls.JspRenderer.endRender(JspRenderer.ja
va:142)
at com.bea.netuix.nf.ControlLifecycle$1.postVisit(ControlLifecycle.java:
538)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWa
lker.java:564)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWa
lker.java:553)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWa
lker.java:553)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWa
lker.java:553)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWa
lker.java:553)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWa
lker.java:553)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWa
lker.java:553)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:247)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:204)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:146)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java
:333)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:196)
at com.bea.netuix.servlets.manager.PortalServlet.doPost(PortalServlet.ja
va:772)
at com.bea.netuix.servlets.manager.PortalServlet.doGet(PortalServlet.jav
a:671)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:147)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1072)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:465)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:27)
at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilte
r.java:293)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:6987)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:3892)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2766)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)

The page is slow because of the VO query.. I have tuned the query... Now its faster....

Slow start and page load on 10.8.5?

I recently upgraded to 10.8.5 from 10.6.8. It now takes several tries to get the system to start, and page loading on the net seems slower. Is this normal?

No.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
OS X Recovery
OS X Recovery (2)

Any ideas? In the history may iPad never crashed but after updating to iOS 5 it crashed every 30 minutes, and browsing is very slow

Any ideas? In the history may iPad never crashed but after updating to iOS 5 it crashed every 30 minutes, and browsing is very slowAny ideas? In the history may iPad never crashed but after updating to iOS 5 it crashed every 30 minutes, and browsing is very slow

I found the reason why our iPads are slow after iOS 5!!!!!!!
What you need to do is this:
1) launch settings, go to mail contacts and calendars, go to fetch new data, advanced, and set iCloud to fetch.
2) go back and set an interval of when to fetch. Mine is set for thirty minutes.
3) make sure on top push is still on, that means that all your emails will still be pushed, but all the iCloud sync (contacts, calendars, reminders, bookmarks) will happen at the interval you choose.
Restart the device. Your performance should be 10x faster! No more keyboard lag, nothing! Doing this puts less stress on the A4 chip, which we know we need every bit we can get with it now!!!
Optional:
1) in the settings, go to safari.
2) clear all history and cookies/data
3) enable private browsing. One of the biggest reasons why devices are slow is because it keeps all the history and cookies in the RAM. You need more RAM to make things faster. By turning on private browsing, it never records it!

Dreamweaver CS6 and CC both very slow page rendering under Mavericks

Dreamweaver CS6 and CC both very slow page rendering under Mavericks compared to 10.8.5
Any ideas?

One other thing I am seeing:
When I open any document (html, javascript) inside DWCC now, then close it without any changes, DW asks if I want to save changes.
I just tested this under 10.8.5 and there is no lag there, nor are documents mysteriously modified when opened.
Note: I have tested this both with and without other Apps or extensions running in Mavericks and 10.8.5

Boot and page load very slow after 2nd HD install

Similar Messages

Maybe you are looking for