Boot Camp 2.1 problems after installation, how to fix?
Downloaded and installed Boot Camp 2.1 to my WinXP SP2 partition. After installation and rebooting, problems began to occur:
1. iSight no longer working, hardware wizard keeps popping up. Reinstalling driver for iSight, no help. Finally had to disable.
2. Keyboard message popping up during bootup of XP stating that it isn't installed properly. However, keyboards - both external and internal seem to be working OK.
3. Blue Tooth error message popping up when bringing MacBook out of Standby (from WinXP). Message states Blue Tooth not installed properly. After MacBook wakes up, Blue Tooth seems to be OK.
Tried reinstalling Boot Camp 2.1 again but no joy. Same errors.
Finally had to remove 2.1 and revert back to 2.0. After reverting back to 2.0 I had to run system restore from XP to get everything back to normal. Everything OK now running Boot Camp 2.0.
How do I resolve the above errors and what does 2.1 suppose to fix - if anything?
Regards.
Thank goodness you got back to normal. I have the Blue Screen of Death and spontaneous shutdown after installing 2.1. I uninstalled 2.1 and tried to reinstall 2.0 using the Leopard DVD and cannot get the installer to work. I get an error code 2753 and the installer shuts down.
Now when I try to open the 2.1 installer nothing happens. I think a reinstall of Windows XP is in my future. Thanks Apple.
Similar Messages
-
Problem after installation Project Server 2013 CU September 9, 2014
Dear All,
I have some problems after installation
Project Server 2013 CU September 9, 2014 (Hotfix 2883072) on 3 level farm
Before installing CU, I have installed
SP1 for Project Server 2013, installation and configuration was successful.
Then I have installed CU and I have not get any errors during installation process. Then I have restarted servers and in SharePoint health analyzer got an error about patch/installation status
on WFE server.
I checked in Windows installed updates and hotfix is installed. I checked in SharePoint Update and Upgrade history and there were no errors during installation. But when I checked in Manage
Patch Status list I found an information:
Language Pack for SharePoint and Project Server 2013 - Russian
Microsoft Project Server Russian Language Pack 15.0.4420.1017 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Microsoft Project Server 2013
Microsoft Project Server English Language Pack 15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
Microsoft Project Server Web Front End Server
15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
If I run installation again I get message that nothing will be updated - no update needed.
Please help, how I can install missed packages?The problem was solved !
I solve it using two ways:
1. I have installed the hotfix for Project Server - Hotfix for Project Server 2013 October 14, 2014 KB 2889959 (Projectserverwfe-x-none.msp, Projectservermui-Language-Code.msp)
2. using command
Psconfig -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures -cmd installcheck -noinstallcheck
After two actions I was able to run SharePoint Configuration Wizard and upgrade database. Configuration completed successful. -
Boot Camp cant be recognised after Mac OS Yosemite update, Please Help?
I've updated my Macbook Pro 13" OS software and apparently has crashed my boot camp partition.
Specs:
MacBook Pro (13-inch, Mid 2012)
2.5 GHz Intel Core i5
4 GB 1600 MHz DDR3
Intel HD Graphics 4000 1024 MB
I've looked at the terminal process by using certain codes etc, but i dont really understand it fully so if anyone has a similar problem or knows how to fix it please help, I have a lot of important information.
Thank youdiskutil list
diskutil cs list
sudo gpt -vv -r show /dev/disk0
sudo fdisk /dev/disk0
Hassans-MacBook-Pro:~ Hassan$ diskutil list
diskutil cs list
sudo gpt -vv -r show /dev/disk0
sudo fdisk /dev/disk0
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 200.1 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data 150.0 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *199.7 GB disk1
Logical Volume on disk0s2
5369FABD-46B3-4E24-8429-0CC5AD843B3E
Unencrypted
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_partition_scheme *16.0 MB disk2
1: Apple_partition_map 32.3 KB disk2s1
2: Apple_HFS Flash Player 16.0 MB disk2s2
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: Apple_partition_scheme *16.0 MB disk3
1: Apple_partition_map 32.3 KB disk3s1
2: Apple_HFS Flash Player 16.0 MB disk3s2
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: Apple_partition_scheme *16.0 MB disk4
1: Apple_partition_map 32.3 KB disk4s1
2: Apple_HFS Flash Player 16.0 MB disk4s2
Hassans-MacBook-Pro:~ Hassan$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A2693D38-F82C-4464-9D0D-C41859885304
=========================================================
Name: Macintosh HD
Status: Online
Size: 200111923200 B (200.1 GB)
Free Space: 18980864 B (19.0 MB)
|
+-< Physical Volume EF5A76B8-8363-49CD-B178-4CF940B51A8B
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 200111923200 B (200.1 GB)
|
+-> Logical Volume Family 53FEE6C7-786D-4990-9BBA-5396F02EE50F
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume 5369FABD-46B3-4E24-8429-0CC5AD843B3E
Disk: disk1
Status: Online
Size (Total): 199740620800 B (199.7 GB)
Conversion Progress: -none-
Revertible: Yes (no decryption required)
LV Name: Macintosh HD
Volume Name: Macintosh HD
Content Hint: Apple_HFS
Hassans-MacBook-Pro:~ Hassan$ sudo gpt -vv -r show /dev/disk0 -
Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.That is usually a symptom thet the phone was hacked or jailbroken. Was it?
-
A few days ago when I tried to start my MacBook Pro in windows 7 (enterprise) I encountered a completly black screen after the startup screen.
1) Choose start in Windows 7 from boot camp menu (holding option after starting up computer)
2) Windows start up screen would appear and finish
3) For a very brief second my cursor pointer would appear and login screen would flash onto the screen, then the screen would go black
BUT
I CAN boot windows 7 in safe mode
The computer is still on when screen goes black (fan still running and i can use keyboard commands to shut down the computer)
I've been searching the Internet for DAYS to no avail
PLEASE someone help me....... ive already tried the sfc /scannow and dskchk commands in the command prompt windowWin 7 Enterprise is not supported by Boot Camp, you may or may not get it to work reliably, (I would not bother to try)
Read this document then pick a supported version of Windows for your Mac. -
has anyone ever had this problem and know how to fix it ?? I upload songs on to my ipod and they appear on my ipod in itunes but after i disconnect (the correct way) the songs do not appear on my ipod. If i plug the ipod back into my computer it still shows them as being on my ipod through itunes but not when i disconnect please please please help!! thankyou! (Also the songs i'm trying to upload are cd's that i have brought)
See Grouping tracks into albums, in particular the section Missing Artist or Album not with others by same artist.
tt2 -
The boot camp manager keeps quitting after re-starts with an error message, why? I've installed the latest updates for XP 32bit
Alveto wrote:
The boot camp manager keeps quitting after re-starts with an error message, why? I've installed the latest updates for XP 32bit
Are we supposed to guess what the error message is? -
I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.
http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html -
when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
Just last 2 days started getting an APS Daemon.exe-System Error saying my MSVCR80.dll file is missing when booting up my PC with Windows 7. I tried to reinstall itunes, but got another error message. Anyone having this problem or know how to fix it?
I now see the message from tt2 and will try that. Thanks!Read this:
MSVCR80.dll missing, cannot install iTunes -
The vibrate symbol that appears on screen when turning vibrate on, continually appears on my screen and vibrates all day. Has anyone had this problem or know how to fix it?
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
I just updated my iphone 4s to ios 6 and now whenever i take a picture it doesnt save to the camera roll. does anyone else have this problem or know how to fix it?
Same problem on im iPhone4 / iOS6 with normal camera!
The camera takes a picture but the picture (video) doesnt appear in my Photos and therefore is not saved! -
I just updated my MacBook (9/20/13) and now my Wifi won't turn on. Does anyone have a similar problem or know how to fix this?
I just completely shut down and turn on computer and wifi came back
-
Firefox Browser freezes when websites have google analytics, anyone else experienced this problem? Know how to fix?
== URL of affected sites ==
http://www.smarteoffers.comHello Steven.
There have been similar reports, yes. You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author. -
I purchase songs from Itunes and as soon as I sync my phone, the song gets deleted. Does anyone else have this problem or know how to fix it?
I have random songs that a have paid for but they just disappear, or cannot be downloaded and so on. Sometimes they are indexed wrongly, and can't be found because of that, no work around because also the search function of itunes has gotten totally unusable. Not much fun to be an apple user anymore. I once used to be a very loyal user. My first apple was a Macintosh SE and an image writer II.
Maybe you are looking for
-
my two daughters and I have iphones. I am trying to set up and use find my friends with them. We have 1 icloud, but different emails. When I send a request it states that I can't send a request to myself. What am I doing wrong
-
I have a pdf form that I am able to fill the data using the Adobe Reader in iPad. I can fill the form and see the data. When I email the form using the email document option from the iPad I receive an email with the form attached but the data is lost
-
Hi, i'm creating the following table and having this error: ERROR at line 8: ORA-00907: missing right parenthesis This is the sql: CREATE TABLE baditemlist ( idbaditemlist NUMBER(16), idproducttypelist NUMBER(3), item VARCHAR2(20), CONSTRAINT pk_idba
-
Clear unused POV Manager Queries in SmartView MS Word
I am copying and refreshing data points in MS Word which works fine. When deleting or replacing this data points the POV Manager Queries are still remaining. Example: I copy 4 different data points into MS Word, then delete 2 of them. When I want to
-
Hi, I am having a master page with the Restrict Page Set Occurance property not set. Now i have created one more master page below the first master page. Now the problem is when ever i insert a new page unser the data node it is picking the header of