Boot Camp 2.x and Windows XP incompatible with Radeon 1600 Video Adapter

Using Boot Camp Assistant 2.0 from a Leopard Install, I generated a 20GB partition and installed Windows XP SP2 reformatting during the install to NTFS. At this point things seemed to be working well. I then used my Leopard Install disk to update the MAC drivers. Now when I tried to reboot, I see the Windows splash window, the screen goes black, the screen goes cyan, then the screen goes black and stays that way. At this point, I cannot do anything with the Windows XP partition other than a power down by holding the power key. If I try to reboot on the XP partition, it goes through a hard drive repair, then goes black screen, light blue screen, black screen, hung. I can boot with Safe Boot, but I have no keyboard or trackpad drivers. I can run the system with an external USB mouse and keyboard.
A friend found that the Video Adapters being used were a problem. (We can't find the reference.) If I go to Start/RightClick My Computer/Hardware/Device Manager/Video Adapters, I can right click on whatever adapters are located there and Uninstall them. At this point, the system will boot up fine using a generic video adapter. I don't know how well it would work if you wanted to use it for high speed gaming.
On bootup I could get to the Internet. I went to Start/All Programs/Windows Update and did the Windows Update. I did it twice to get everything updated to Service Pak 3. (I have read that there is a problem if you upgrade the Apple Drivers to version 2.1 before you upgrade to Service Pak 3.)
At this point, I installed the Boot Camp Update 2.1 and all worked well. I then installed Update 2.2 and the video was again a problem. It appears that the system was booting up ok, but it was happening behind a black screen. If I booted up in Safe Mode, connected a USB Mouse and Uninstalled the Video Adapter/Radeon 1600, I could boot up and the system worked fine.
Unfortunately, Windows (for the first time that I know of) was smart enough to recognize that there was new hardware (the X1600) and it reinstalled the @!#$#-ed X1600 driver without asking me. Now I couldn't reboot without it hanging again.
The final step was that I found that if, instead of Uninstalling, I Disabled the X1600, I can now run using the generic Video Adapter and Windows does not re-enable it.
I hope this helps anyone who has a similar problem, so they don't waste 2 weeks like I did.

Hi Dave,
thanks for these informations.
Before my beloved 2006 iMac went awry and finally bit the dust, I have used the ATI MobilityCatalyst Drivers for XP.
If you're in for another try, here's the link http://support.amd.com/de/gpudownload/windows/Legacy/Pages/radeonmob_xp.aspx?typ e=2.4.2&product=2.4.2.3.10&lang=English
Using the Generic Microsoft Graphics driver is IMHO not a solution, as it really only supports a minimum of the capabilities of the X1600 and is definitely not suited for gaming.
Stefan

Similar Messages

ITunes library and Boot Camp (Snow Leopard and Windows 7)

At the moment, I'm using a Macbook Pro running both OS X and Windows 7 Ultimate using Bootcamp to facilitate this.
The problem that I have is that I keep my iTunes library on an external HDD. In OS X, this isn't a problem as the OS X version of iTunes manages the music on it; adding new podcasts that it downloads and also adding new CDs that I rip to the HDD.
In Windows 7, I installed iTunes and have only run a single "Add folder to library", meaning that only the music that was on the HDD on the first instance is recognised by iTunes. This means that if I were to switch from Windows 7 to OS X, download some podcasts and then go back into Windows 7, iTunes in Windows 7 won't find these new podcasts.
The other (and nowhere near important issue) is that if I forget to disconnect my iPhone before switching over to Windows 7, iTunes in Windows 7 will wipe the apps from it.
Does anyone know how I may be able to resolve this

Your iMac supports OS X Mavericks, so make a backup of your files in Mac OS X and Windows, open the Mac App Store and download OS X Mavericks for free. Check that your apps are supported > http://www.roaringapps.com
OS X Mavericks includes Boot Camp Assistant 5, but it's compatible with Macs that can only use Boot Camp 4. Note that you only have the Boot Camp Assistant as the version 5, and not the drivers or anything else, so there's no problem in installing a 32-bit Windows 7 version if you want. Also, you won't lose your Windows copy after upgrading to OS X Mavericks, so don't worry

Boot Camp 3.0 and Windows 7 64-bit - My experiences/notes

I just installed Boot Camp 3.0 from the Snow Leopard DVD onto my MacBook Pro 17 (Mid 09) which is running Windows 7 64bit RTM and had Boot Camp 2.1 previously installed on it.
My experiences/notes:
1. The Boot Camp 3.0 installation automatically removed the Boot Camp 2.1 drivers that it was going to update and then installed the newer 3.0 ones
2. You still can only use the GeForce 9600M GT graphics chipset, i.e. only the 9600M GT shows to windows and appears in the device manager
3. Deferred Procedure Calls (DPC) Latency issues still exist although it doesn't seem like you need to run the Bootcamp.exe on CPU 0 affinity only (Bootcamp.exe = the updated/Boot Camp 3.0 version of KbdMgr.exe)
4. You still can't fully dim the keyboard backlight with the F5 key
5. I manually updated the 'important' drivers to the very newest one, i.e.
5a. Latest Nvidia driver for GeForce 9600M GT => 186.81notebook_win7_winvista_64bit_internationalwhql.exe
5b. Latest WLAN chip driver => Broadcom (4322AG chipset) Wireless LAN Driver for Microsoft Windows Vista 5.10.91.8 (14 May 2009) = sp43743.exe
5c. Lateset Realtek High Definition Audio Codec => VistaWin7R231.zip
6. Although I still have bad DPC latency, I haven't yet noticed any audio/video lag/drop-outs/screeches etc.
Best of luck to you all and I hope this helps someone, Dingle7
Message was edited by: Dingle7
Message was edited by: Dingle7

Hi all,
Here are the links for the latest 'important' drivers:
5a. Latest Nvidia driver for GeForce 9600M GT => 186.81notebook_win7_winvista_64bit_internationalwhql.exe
http://www.nvidia.com/Download/index.aspx?lang=en-us
5b. Latest WLAN chip driver => Broadcom (4322AG chipset) Wireless LAN Driver for Microsoft Windows Vista 5.10.91.8 (14 May 2009) = sp43743.exe
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=321957&prodSeriesId=3872994&swItem=ob-71357-1&mode=5
NOTE: You will need to manually update the drivers in the windows device manager (select 4322AG chipset) because the installer doesn't overwrite the old drivers from Boot Camp
5c. Lateset Realtek High Definition Audio Codec => VistaWin7R231.zip
http://www.realtek.com.tw/DOWNLOADS/
Message was edited by: Dingle7

Boot camp, MAC pro and windows XP

Hi,
I am leading a programmers team, what we want is the faster machines to improve performance. Currently investigating an HP machine with windows XP 64 on it. But that doesn't work for us as most of hour programming tools do not work under XP 64. We cannot install 32 bit Windows because of the 2 Quad cores in the machines (according to IT).
Solution could be MAC pro, same specs (2 quad cores and 4 GB internal memory ) but with Boot Camp I can install XP 32. Or am I wrong? Or will MAC pro with XP 32 do not give an performance increase we can expect with 8 core?
Robert

Hi Robert,
for the IT guys: XP Prfessional does support up to 2 processors with multiple cores each.
XP Home does only support one processor with multiple cores.
The main problem with Mac Pro and 32-bit Windows XP or Vista (and possibly with the HP machine, too) is, that because the expansion slots are reserving quite some parts of RAM for their own Range of Adresses (even if no expansion card is in them) from the 4GB of RAM you will only get about 2GB for XP Pro 32-bit to see and use.
Only chance to use the full amount of RAM is 64-bit Windows and then Vista is the one to use, because Apple does not provide any drivers for XP-64 bit.
Regards
Stefan

HT3777 Boot camp 3.0 and windows 7

I'm runing snow leopord 10.6.8 with Bootcamp 3.0. After partitioning the hard drive I get the message, " no signed device driver found." Which I don't get because it should as atleast see the HD??

Hi all,
Here are the links for the latest 'important' drivers:
5a. Latest Nvidia driver for GeForce 9600M GT => 186.81notebook_win7_winvista_64bit_internationalwhql.exe
http://www.nvidia.com/Download/index.aspx?lang=en-us
5b. Latest WLAN chip driver => Broadcom (4322AG chipset) Wireless LAN Driver for Microsoft Windows Vista 5.10.91.8 (14 May 2009) = sp43743.exe
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=321957&prodSeriesId=3872994&swItem=ob-71357-1&mode=5
NOTE: You will need to manually update the drivers in the windows device manager (select 4322AG chipset) because the installer doesn't overwrite the old drivers from Boot Camp
5c. Lateset Realtek High Definition Audio Codec => VistaWin7R231.zip
http://www.realtek.com.tw/DOWNLOADS/
Message was edited by: Dingle7

Switching between Boot Camp 2.1 and Windows XP w SP3

I have tried holding down the option key during boot up as described in the setup guide but it boots to the mac. Doesn't ask - any ideas?
Thanks,
Don

Hi Don,
possible solution from Apple Care phone support. Tried a different USB keyboard and it worked fine. Used original keyboard and no go again. Used original keyboard with mouse plugged into separate USB slot at the back and it worked fine again. Disconnected everything including power, waited 30 seconds, reconnected everything, including offending keyboard and mouse in their original (problem causing) slots, restarted holding option key and presto worked as it should. Guy suggested it was a power management issue on startup, that for some reason the option command is not getting to the computer, something else may be draining the power. (BTW, his description of the technique is press the power button like one is poking someone in the ribs, wait 1 second then press and hold the Option key)

Upgrading to Vista with Boot Camp 2.1 and XP SP3

Hello
I decided to buy Vista to see for myself how it works. It hasn't come in yet, but I want to know if I can upgrade to Vista when I have Boot Camp 2.1, and Windows XP Service Pack 3.

I have upgraded to Vista SP1 from XP SP3 successfully on one of my macs. Once Windows is loaded and up and running then you can upgrade it just like you normally would when running a Windows based PC.
Axel F

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and somehow it crashes the mac side peridoically. I am told I need to "clean" it and reinstall lion using the recovery drive. will that delete the windows partition too??

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto. I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system. My question is will this also delete the "windows" partition drive and all that data too. If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

Did you install BC drivers on the Windows side?

How to enable right click and taping in Boot Camp 3.1 for Windows XP SP3?

I have my MacBook Pro with Snow Leopard 10.6.8 running on it...finally could instal Boot Camp 3.0 and then updated to 3.1 in Windows XP SP3.
The trackpad recognizes only left click and do not recognize taping!What to do?

Check the Driver folder on the Boot Camp Driver Support DVD, or CD, you made.
Look in the Apple folder under Drivers. It is called AppleMultiTouchTrackPadInstaller.exe
That should install a Control Panel Applet.
EDIT:
There is another in that folder called AppleTrackPadInstaller.exe
Message was edited by: Shootist007

How do I install Lion on an MBP with Snow Leopard 10.6.8, Boot Camp'd XP and a Master Boot Record?

I think this is called "a pickle."
The machine is a 13" MacBook Pro, 2.66 GHz Core 2 Duo w/ 4 GB RAM and a 500 GB HDD.
The HDD has a Snow Leopard 10.6.8 partition, and a Windows XP partition, via Boot Camp. Its Partition Map Scheme, sadly, is a Master Boot Record. I need to reformat it to a GUID Partition Table scheme to install Lion, but when I attempt to boot it from the Snow Leopard 10.6.0 DVD to wipe the drive, it grey-screens. Dead end.
From what I can gather on the forums, I can't boot a 10.6.8 machine using a Snow Leopard 10.6.0 DVD. I can't find my grey DVDs for this machine – still looking for those – but I expect those won't work either, being Leopard-generation?
The machine works fine, for the most part, including the optical drive. Has occassional display and wake glitches. Its HDD is backed up on a Drobo via Time Machine. I also have a 15" MBP Core i7 (with the exact same problem: 10.6.8, XP, MBR) which I can use for Target Disk Mode via FireWire. If I try to wipe the HDD on the 13", using Disk Utility on the 15" via Target Disk Mode, will the 13" then boot successfully from the Snow Leopard 10.6.0 DVD?
I just want to wipe the 13" machine, reinstall a fresh copy of Snow Leopard, then update it to Lion and restore from Time Machine, and never touch anything Windows-related ever again. (And then do the same for my 15", for which I've found my 10.6.3 grey disc. Not sure if that's any more promising.)
Any help appreciated!

Sounds like something is wrong with your disk. Have you tried cleaning it?
The Snow Leopard 10.6.0 DVD is fine – it mounts on both my 13" and 15", and I successfully created an image of it on my 15". I also tried my wife's Snow Leopard 10.6.0 DVD, also clean, which produced the same grey screen result.
Have you tried to use boot camp to erase the Windows partition?
Yep, this is supposed to be the proper way to remove a Windows XP partition from Boot Camp, so this was the first thing I tried. I get the same error as everyone with a Master Boot Record scheme appears to get:
The startup disk cannot be partitioned or restored to a single partition.
Back up the disk and use Disk Utility to format it as a single Mac OS X Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
So, if I can't launch the Disk Utility from the Snow Leopard DVD, my next best guess is wiping it from my 15" over Target Disk Mode. However, if I try that, and still can't get it to boot from the Snow Leopard 10.6.0 DVD, then I'm stuck with an MBP without an OS.
My conclusion – that 10.6.0 DVDs can't boot to 10.6.8 machines – was based on forum posts about downgrading from Lion. I was wondering if there's a way to create a "10.6.8 restore DVD," and try booting from that. Shot in the dark perhaps.

I have Windows on here but I can not find Boot Camp l me at 229-300-8915 I need someone that I can talk to, so i can understan how to do boot camp 4.0 for windows installment

Hello Guys I need help it is Urgent to I can not get no where with the tech Support they are not willing to help me unless I pay Money to do so Apple is not a good product when u can not pay to have them Help me I am trying to get Boot Camp set up so i can set up Window 7, I have the updated Verison of Boot Camp which is 4.0 everytime i try and get Boot Camp Assistant to work at one point of the Installation it asked to highlight 0.4 Boot Camp which I did and when I clicked ok It un did Boot Camp so I have windows on here but I can not get to Drivers over to Windows without Boot Camp and I can not get the connection on the Window Side please can Someone please Call and help me my Number is xxxxxxxxxxxplease this is Urgent matter thanks Michelle
P.S I don't understand the instruction on this please help me somone
<Edited By Host>

It is difficult to understand your issue from your discription. I have three suggestions.
1. Visit the Boot Camp forum. You posted in the Mac Book Pro forum about your Boot Camp issue. The Boot Camp gurus hang out in the Boot Camp form. https://discussions.apple.com/community/windows_software/boot_camp
2. Read the Boot Camp installation guide. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
3. Do not post personal information such as phone numbers in public forums.

Boot camp assistance to install windows 8

im using a macbook pro 13-inch late 2011 with mac os x 10.7.2 which has bootcamp 4.i want to install 64-bit windows 8 on my mac.i found out you need boot camp 5 to install it.can i install windows 8 on bootcamp 4 and then update to boot camp 5 when running windows?or do i have to update to bootcamp 5 beforehand?if so,how do i do that?

From Boot Camp: System requirements for Microsoft Windows operating systems
Requirements for all Windows installations
In order to install Microsoft Windows using Boot Camp, you need the following:
An Internet connection
An administrator account in OS X to use Boot Camp Assistant
The keyboard and mouse or trackpad that came with your Mac (If they aren’t available, use a USB keyboard and mouse)
A minimum of 2 GB of RAM, 30 GB of free disk space are recommended if you are installing Windows for the first time, or 40 GB of free disk space if you are upgrading from a previous version of Windows
An authentic Microsoft Windows full install disc or ISO file
A built-in optical drive, or a compatible external optical drive is required if you are using an install disc
8 GB USB storage device, or external drive formatted as MS-DOS (FAT) to install the downloaded drivers

Boot Camp error: The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Jounraled) volume or already partitioned by Boot Camp Assistant for installing Windows.

Hi!
I am getting the error:
"The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Jounraled) volume or already partitioned by Boot Camp Assistant for installing Windows."
I read up some on google, but all of them says that they have crated a partition and that is the problem, I only have the standard "Macintosh HD".
I tried to create a partition manually in disk utility but then the error message: "Partition failed with error message: Could not unmount disk."
Can anyone help me? It's driving me crazy.
Thanks.

This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
Then partition.
Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

Boot Camp 2.x and Windows XP incompatible with Radeon 1600 Video Adapter

Similar Messages

Maybe you are looking for