Boot Camp 3.0, Size 900Mb having Drivers in it, not working On MAC with Windows 7

Hello.
I have installed Windows 7 on my MacBook Pro MD103LL/A without installing its drivers , used Boot Camp to install windows but unchecked the "Download Suport Drivers" for windows 7 and only installed windows 7.
Then on logging into Windows 7 i have installed BootCamp version 3.0 for windows 7 successfully but none of my drivers got updated through it as it showed the updating process while installing on windows but didnt update my windows 7, then i installed Boot Camp 3.1, 3.2 , 3.3 as Update on windows still nothing happened Whats the issue ?? I am not installing the drivers through BootCamp of MAC because it takes ages to download them thats y i found this as solution to install boot camp drivers on windows manually but the solution is not working for me PLZ HELP I shall be hight Thankfull.

Thanks mende1 .
I am receiving this erro on the above link
The requested URL /content/downloads/54/00/041-0694/sq2RLp7XVNQzRG8qdpsq9sj4pHsgXkgPYg/BootCampES D.pkg was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Apache Server at swcdn Port 80

Similar Messages

Boot camp 4.0 getting error the installer disc could not be found

boot camp 4.0 getting error the installer disc could not be found.

See if Windows 8 RP x64 works as an experiment.
Usually slowest burn speed will.
I am assuming that smething changed but there are I presume a number of other people who have, and folks with new MacBook Air too.

Boot-camp Win XP SP3 Sound Device drivers incompatible

Hi,
I have recently installed windows XP on boot camp and installed all the correct software, but the sound card does not work! I installed the boot camp software on XP from the Leopard DVD and everything worked fine except the sound. I then installed the recent update for boot-camp 2.1 from "Apple Software update" hoping that this would solve the problem. It didn't. I then went back to the Leopard DVD and explored through the installers in there. I knew that the Sigmatel driver was missing, so I ran the installer for that from the CD. The installation seemed to work, and it asked me to restart, so I did, when windows came back up again the installer popped up to complete the installation but half way through, an error message came up and told me that "The driver you are trying to install is incompatible with this version of windows. Click OK to end the setup". I then tried going into Device manager and manually installing the drivers from the Sigmatel directory. yet another message stopped me "This file does not contain information about the device you are trying to install" and clicking ok takes you back to driver selection. I then thought about trying the installer for Realtek and went through the same process, this time the installer finished correctly but the driver was still not present, so back to device manager again. In the Realtek folder there were at least a dozen files containing drivers, so i tried them all, without success and seeing the "does not contain information about the device" message.
If anyone knows how to help, plz do. Thanks

Hi..yeah..can anyone help on this please..
im also experiencing the same problem..ive also tried realtek R249..
thanks...

Boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

HT4407 Is there any way to download these files manually from another source? The download from boot camp keeps stopping at around 25% and then produces the error "Can't download Windows Support Software because of a network problem". Thx!

Is there any way to download these files manually from another source? The download from boot camp keeps stopping at around 25% and then produces the error "Can't download Windows Support Software because of a network problem". Thx!

No. This issue is dicussed here frequently. The only option is to be patient and try often. Search this forum for other posts about this issue.

Hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

Have you changed the system voice to an English one in system preferences?

Mac. Yosemite- Illustrator CS6 and CC both crash right after starting. Have Suitcase 6 (not 5). current Wacom drivers. Tablet not connected to Mac.

Mac. Yosemite- Illustrator CS6 and CC both crash right after starting. Have Suitcase 6 (not 5). current Wacom drivers. Tablet not connected to Mac. Anyone else experiencing this?

Hi,
Scott Agnew,
Please check if there are any updates pending for Suitcase fusion and Illustrator.
You can also try resetting AI preferences.
User Library/Preferences/Adobe Illustrator [#] Settings
Rename Adobe Illustrator [#] Settings to old Adobe Illustrator [#] Settings
User Library/Preferences/Adobe/Adobe Illustrator/Version[#]
Rename Version[#] to old Version[#]
Access user library Access hidden user library files | Mac OS 10.7 and later
Do you get any crash report. Look if it says anything for Wacom or extensis?
Thanks,
Nikhil Gupta

Boot Camp - Lion / Mountain Lion latest video drivers Win 7 64-bit

I've been running Boot Camp on my late 2008 Mac Pro w/ OS X Lion and Windows 7 64-bit for some time now, no probs. Two years ago I installed the Apple version of the Nvidia GT 120 video card...has been working like a charm. Currently all latest OS updates are applied.
At issue: I'm trying to get a new plug-in for After Effects to install and it requires a more up-to-date video driver than the circa 2010 driver installed w/ Boot Camp (Leopard?). When I upgraded to Lion, I assumed all latest drivers would be installed in Boot Camp, and I've seen no info on whether Mountain Lion would provide more current video drivers...running 'Update Driver' (just to see what would happen) within Windows 7 yields "You're using the latest driver", which is not actually correct, but may be in the 'Boot Camp ecosystem'.
Are there any ways I can reliably update the video drivers? I know the retail/Nvidia latest is "296.10" from March, 2012...but likely that won't install or work properly in a Boot Camp setup (or am I wrong?).
Any info/ideas would be greatly appreciated. Thanks!

Wait for GTX 670 down the road then.
You had to have used BCA, downloaded and then run the setup - you can even just navigate to, find Nvidia driver folder and check the Details of that. Or why bother, the real driver is Nvidia anyway.
http://us.download.nvidia.com/Windows/301.42/301.42-desktop-win7-winvista-64bit- english-whql.exe
How to tell: Device Manager for one. But the easiest way to see everything, including temps, fan speeds, chipsets and driver versions - and more:
http://www.aida64.com/product/aida64-extreme-edition/overview
Also, most every Mac Pro owner has needed to manually download and install RealTek driver too for audio out the back ports.
Go to www.realtek.com though instead of using MediaFire - they have started causing a lot of pop-unders and other adware that I find disgusting and questionable, even if the site and service needs "ad dollars" popups were something users ran from and why we (try) using and turning off all those things they manage to find ways around. And the malware/adware and SQL-injection schemes are still with us. So watch for and personally avoid MediaFire - might be paranoid but then I consider it reasonable caution.
Others:
GPU-Z:
http://www.techpowerup.com/downloads/SysInfo/GPU-Z/
AIDA64 Extreme Edition
http://www.aida64.com
http://www.aida64.com/product/aida64-extreme-edition/overview
CCleaner
http://www.piriform.com/ccleaner
Latest utilites - all in one location
http://forums.tweaktown.com/gigabyte/30530-latest-overclocking-programs-system-i nfo-benchmarking-stability-tools.html

Removed Boot Camp, but Disk Size was not resized.

I removed my Windows Partition, but during the middle of the removal, I switched off my mac with the power button in panic, because everything froze.
When I restarted, however, the Boot Camp disk has been removed, but my Mac Disk was not returned to its 400GB original size...
Is there any solution to recover the size?
I used the /sbin/ fsck - fy but it did not help.
Thanks.

Oops, my bad!
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            319.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
diskutil cs list
No CoreStorage logical volume groups found
sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 976773167
      start       size index contents
          0          1         PMBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 623531456      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
623941096    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
625210632 351562503
976773135         32         Sec GPT table
976773167          1         Sec GPT header

I have installed Boot Camp up till 3.2 but drivers doesn't activate

Hello folks,
Just today i installed Windows 7 Professional 64bit, but I have been having quite a bit of trouble. I am on my new MBP 2011 MacBook Pro 13 inches with the 2.3 GHz Intel Core i5.
First things first. I arrived at my friends house today having just gotten my DVDs to copy over my online bought copy of windows which I had to download on my PC because the download manager was an .exe file. I installed windows with no problems after having burned it to the DVD. Next up was the drivers, but I have forgotten the DVD with the drivers at home. I went online and managed to find the needed drivers, 3.0, 3.1 and 3.2. At first I got the error that I have seen so many get, saying that the software ins't compatible with the hardware. Also I could not use the regular install file, so I looked on google to find that I had to locate the BootCamp64.msi file, and I managed to install the updates through this.
Now my question lies unanswered to me, yet I am sure there is a logical and simple solution. When I open up programs within the control panel I see a ton of updates at my exposal, but none seem to be activated. I can't get on wi-fi and windows keeps telling me that I am missing device drivers. So having installed the drivers, they do not seem to activate. This seems like something easy to solve, and maybe it is, but I need help for this one as I couldn't find anyone having the same issue.
Thank you, Danelander.

Please close this thread, I have managed to get a hold of a DVD including all the drivers, so I suppose that will work, if not one way then another.
Thank you for the quick answers.

Boot camp files do not show in Mac following Windows restore

I am trying to increase the size of my boot camp partition (using Winclone to create an image).
This is my stupid messing around which created the problem:
I had previously tried changing the partition sizes, repartitioning my HD: making windows bigger (uninstall via boot camp, reformat drives, reinstall mac from time machine and windows from boot camp). This worked fine, but I stupidly tried restoring my files mannually in windows using my file backups, but this messed up the location of some of my files (e.g. creating another C folder within the boot camp (C) partition). So I started again: I had made a system image of windows using the windows backup of the partition, before I physically changed the files.
This is what I did to fix it:
I reformated my drives back to the previous size (making windows smaller, uninstall, reinstall via boot camp assistant; and mac larger) restored windows using system restore in windows. I was able to restore to the previous windows system image, and I can boot up windows using the option key at start up.
This is what I'm left with:
However now the boot camp hd icon is called 'untitled' (not boot camp), and contains no folders (disk utility says it is practically empty). I can't repartition my drives if I am unable to clone the boot camp files (e.g. using WinClone) from the mac partition.
I know the windows restore worked, because I can boot in windows, it seems my mac partition is no longer reading the boot camp side? How do I fix this? How can I find the boot camp windows partition files within my mac?
Thanks.
I have a mid 2011 iMac with Lion OS X 10.7.2, and Windows 7 Home Premium 64 bit.

Is there a way to do this that doesn't cost money?
What is the problem with my boot camp? Is it the mac side not reading the boot camp files?

I am using windows Macbook pro 15 retina display model with latest mountain lion 10.8.3 software Have installed windows 8 perfectly via boot camp. However many a time the machine is not able to boot windows 8 and aborts. just shows the green screen for a

I have installed Windows 8 perfectly ia boot camp but on booting the windows 8 does not load up fully. It comes upto the windows green screen for a moment and then goes blanlk. It is very frustrating.

no one has replied me too got this issue ,

How do I restore data to a new mac with windows boot camp partition?

Hi
I have a new iMac and an old MBP, I'd like to copy all of the data of my old MBP to the iMac.Would doing that affect the windows boot camp partition?
and how do I do it?
right now im backing everything up on my MBP using super duper
both the MBP and the iMac are running on Lion

I am assuming the Boot Camp partition is on the old MBP and that the SuperDuper clone is on an external drive and is bootable. The Super Duper clone does not include the Boot Camp Partition.
To get the Mac Data moved you can use Migration Assistant and if you want to transfer the Boot Camp partition you would need Winclone to move/copy it to a newly created Boot Camp partition on the iMac. The SD Clone ( and a Winclone backup) is your insurance policy if some kind of difficulty arises.
Links to more detailed info.
http://support.apple.com/kb/HT6025
http://support.apple.com/kb/PH11275
http://pondini.org/OSX/MigrateLion.html
http://twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-winclo ne
http://twocanoes.com/support/winclone/using-sysprep-when-migrating-boot-camp

Boot Camp - Setup was unable to create a new system partition....from Windows install

Hi folks. So I ran the boot camp wizard and made a USB install key for windows from that. I boot to it and everything works until I get to the install. I format the Boot Camp partition as indicated in the walkthrough and then I get "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information." from the Windows installer. What do I do? Thanks.

just to add to the mix. . . i just got a new macbook retina.
Originally used a USB flash drive. Hit the same barrier described here.
Spent a few hours with drive unplugging / replugging silliness. No progress. Went back into OSX to attempt using an external DVD drive. There is no option for that in Bootcamp assistant now - must use USB.
Grabbed a different USB stick and started again. This time I used the other USB port on the macbook (the one on the left). Everything worked fine this time!?
You still have to go into "advanced options" and hit "format" when you get to the partition screen.
Moral of the story: different stick, different port. Sounds random. If that doesn't work, try changing your socks and putting on a hat.
Good luck!

My boot camp fail to install and at the same time i accidentally deleted Mac OS

while i was doing my boot camp i accidentally deleted Mac OS. and my boot camp fail to operate. when i restart it only appear window the window keep asking me to reboot due to some missing file.

What version of OS X did your MBP ship with? Do you have the original installation disc(s) or did it ship with Lion or Mountain Lion.
If it shipped with an installation disk, you're just going to have to boot from that disc and erase your drive and reinstall the version of OS X that came with your computer. If your computer shipped with Lion or Mountain Lion, you're going to have to erase your drive and use Internet Recovery to install the OS that shipped with your computer (do this by holding down the Command, option and R keys on boot).
I hope that you have a backup?
Clinton

Boot Camp 3.0, Size 900Mb having Drivers in it, not working On MAC with Windows 7

Similar Messages

Maybe you are looking for