Boot camp 3.2 windows xp keyboard wire does not work key volume and brightness, etc.

I bought today a new apple keyboard with wire.
The old keyboard had a broken button, but the control keys f1-f12 all worked with both os mac or os both windows.
Now I change the keyboard, but I do not work anymore keys f1-f12 under Windows XP, but they work under Snow Leopard.
I updated bootcamp in XP until version 3.2, but the problem remained.
What can I do?
best regards

Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

Similar Messages

Keyboard Backlight does not work

I just got my new 2009 13" MacBook Pro.
I have installed Vista and loaded my Boot Camp drivers.
The Keyboard Backlight does not work.
Any suggestions?
Thanks in advance!

Powerplan works great!

Why to I FREQUENTLY have to reload my page to get hot links to work? Andmy keyboard frquently does not register key strokes, particularly the space bar.

Why to I FREQUENTLY have to reload my page to get hot links to work? Andmy keyboard frquently does not register key strokes, particularly the space bar.

# Right-click an empty area of the tab bar and choose Customize.
# Click the Restore Defaults button, then the Exit Customize button.
# If you don't already have it, install [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ Classic Theme Restorer] and restart Firefox when prompted.
# Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
# Next to Classic Theme Restorer, click the Options button.
# On the Main tab, make sure "Movable back-forward button" and "Hide urlbars stop & reload buttons" are checked. You might also want to check "Combine stop & reload buttons". Close the options window when done.
# Right-click an empty area of the tab bar and choose Customize.
# Drag the Back/Forward, Stop and Reload buttons onto the navigation toolbar.
# Click the Exit Customize button in the lower right corner when done.
That being said, I should point out that you can reload pages in other ways.
* Right-click any tab and choose Reload.
* Right-click an empty area of the page and choose Reload.
* Press F5.
* Press Ctrl+R (Mac: Command+R).

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

HT4882 hi apple it's kian ! i have mac book air with 10.7.2 version may keyboard light does'nt work with f5 and f6 ! please help me !

hi apple it's kian ! i have mac book air with 10.7.2 version may keyboard light does'nt work with f5 and f6 ! please help me !

Hello Kian,
This may sound silly but if you put your hand over the isight camera, do the lights change on the keyboard?
Ryan

Since upgrade to Windows 8.1, ICloud does not work

Since upgrade to Windows 8.1, ICloud does not work. I could click on buttons for Reminders, Notes, etc. and would take me into ICloud to share with other devices. No longer functions.

Hi:
I can't help you with why your PC won't upgrade to W8.1, but I can tell you that if you manage to get W8.1 to install, you won't be able to get the graphics to work anymore.
There is no W8.1 driver for the graphics setup in your PC.
So maybe it is a good thing that you can't get it to work.

MacBook Pro 13-inc, keyboard backlight does not work

My keyboard backligth does not work.
I have a MacBook Pro 13-inch, early 2011 with MAC OS X Lion 10.7.3.
I already set the preferences to be on in autmatic mode with low ligth on but this did not work.
When I turn on the computer the keyboar lights on but as soon as the computer finish the log on the keyboard goes off.
I will appreciatte any advise.

Powerplan works great!

Double Click on Keyboard shortcut does not work

I want to change a keyboard shortcut. I have a Norwegian keyboard and the key combination for change active window in an application (multiple mail messages or Word documents) is not available. The Keyboard shortcut is set to ' - on my keyboard the ' character is <. The key combination < does not work unless I change layouts to a US keyboard. Keyboard shortcuts says that a double click on the shortcut will allow me to change the combination. This does not happen. I get an error bing instead. Any ideas of what is going on and how to change a shortcut in Leopard. I think this worked in Tiger. I have tried a hardwired as well as my bluetooth keyboard.

Solved this one - you have to click on the key combination itself and not in the text area that describes the key combination.

Custom shortcuts addee via Keyboard.prefPane does not work..

Hi,
I read several sites that all refer to a way to create a shortcut for a menu command without one, ref.: <http://www.apple.com/pro/tips/keyboard.html>
However, that does not work at all for me. Never has. So what I am doing wrong? In particular, I would like to add a shortcut to open the main window of Address Book, after closing the window leaving the app running.
Anyonw could do me a run through? Cause the above mentioned procedure does not work.
Johan
PS: Oh, and in iPhoto I am not able to create a new film roll for the selected photos, even though I am following the exact procedure mentioned in Help..
PB G4 12" Mac OS X (10.4.8) 768MB

Welcome to our community
The issue is typically a matter of focus. Particularly in Firefox. In IE, when the page loads and is presented, the Flash object (your Captivate movie) is given focus. So the keyboard shortcuts work. But that doesn't happen in Firefox. In Firefox, you must first click somewhere on the Flash object to give it focus. From there forward, shortcuts work because the Flash object is now listening for them.
In every class I facilitate I demonstrated this and advise that it's a good idea to have a button on the first slide. This serves two purposes.
It forces the user to click to proceed
It keeps the first slide paused until the user is ready
Yeah, before someone comes along and says: (in an annoyingly nasal tone) Mr. Man, you KNOW there is an option in Captivate to keep it paused at the start... I'm well aware that Captivate offers this option without adding a button, but I prefer it for the reasons above.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

JDK 1.6_07 with Windows: System.out.flush() does not work...

I wonder if this is a known issue: Since I upgrade the jdk1.6 version to the _07 pack, text IO does not work anymore with WinXP cmd.exe window. Assuming a static import of System.out, I use:
static void prompt()
out.print(pr); //pr is a prompt string...
out.flush();
}works as usual with Unix/Linux, but with windows nothing will be written to the terminal, until I make at least one input. In that case a barrage of cached prompts appear all at once.
Do we have a bug for it, can we work around somehow?
Thomas

Since this code works correctly in Java 6u10 on Windows XP
System.out.print("This is the data");
System.out.flush();You are apparently doing something unusual or wrong. What is "out"?
Show a small sample program that compiles and exhibits the problem when executed.

Safari 5.0.3 on Windows XP Kerberos SSO does not work

Our web application runs on JBoss Server 5 supports Kerberos v5 SSO. We have tested it against Firefox, IE, and Google Chrome, and they all works well.
But Safari 5.0.3 does not work.
Our application sends "WWW-Authenticate: Negotiate" to Safari. Safari always pops up a dialog for name and password. After I typed the name and password, and click Login, Safari send NTLM message (NTLMSSP_NEGOTIATE) to the web application, and login failed.
Someone described that Safari supports Kerberos authentication without any additional configuration.
I do not know what goes wrong with my environment and how to solve this issue. Your help is appreciated.
My Safari 5.0.3 runs on Windows XP Professional Service Pack 3.
Thanks
Guofeng

I'm having the same issue. Have you been able to resolve it?

Keyboard illumination does not work. No light.

Hi every one,
I have a problem. My keyboard's illumination does not work at all. I tried pressing on F8/F9/F10 and nothing. Then something happened and now I have to press FN + F8/F9/F10, or even sometimes when I clicked on those, a thing popped on the screen with a "blocked logo" or "restricted logo" kind of a thing. I tried the Lab Tick and no good. I did PRAM reset and saw no difference. So, basically there is still no light at all.
BTW in System Preferences>Keyboard>limitation is checked.
So basically
1. How do I fix the illumination/light on my keyboard?
2. Why did the F8/9/10 work after I press FN at the same time?
Help please...
Message was edited by: maddennisb

Try resetting your SMC.
Resetting the System Management Controller >>
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Show Reading List keyboard shortcut does not work

The Show Reading List keyboard shortcut (shift-command-L) does not work in Lion Safari 5.1.

Problem has been fixed. I reported the bug to Apple from the Safari menu. Also, I had a different application that used the same keyboard shortcut for one of their hotkey's which I disabled. Then it worked fine. Shift-Command-L now shows reading list in Lion.

Keyboard shortcut does not work on first slide in Web Browser

I'm using a workbook to learn Captivate.
I added a keyboard shortcut, the Enter key, to buttons on the first and second slides.
When I preview the project in Captivate, the shortcuts all work.
When I preview the project in a Web Browser (specifically Firefox 3.6.16), the shortcut does not work on the first slide, but does work on subsequent slides.
Any ideas why this would happen?

Welcome to our community
The issue is typically a matter of focus. Particularly in Firefox. In IE, when the page loads and is presented, the Flash object (your Captivate movie) is given focus. So the keyboard shortcuts work. But that doesn't happen in Firefox. In Firefox, you must first click somewhere on the Flash object to give it focus. From there forward, shortcuts work because the Flash object is now listening for them.
In every class I facilitate I demonstrated this and advise that it's a good idea to have a button on the first slide. This serves two purposes.
It forces the user to click to proceed
It keeps the first slide paused until the user is ready
Yeah, before someone comes along and says: (in an annoyingly nasal tone) Mr. Man, you KNOW there is an option in Captivate to keep it paused at the start... I'm well aware that Captivate offers this option without adding a button, but I prefer it for the reasons above.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Boot camp 3.2 windows xp keyboard wire does not work key volume and brightness, etc.

Similar Messages

Maybe you are looking for