Boot Camp and Video Games

I plan on running Boot Camp on my MacBook Pro and getting Windows XP to run a game called Neverwinter Nights 2. But I'm concerned that the graphics card is not powerful enough to run the game. I'm not too familar with Macs yet, so how powerful is the MacBook Pro's graphics card? Is it up-to-date?

I would consider the video card up-to-date
MBP 15" 2.0 = ATI Mobility Radeon X1600 with 256MB of GDDR3 SDRAM and dual-link DVI
MBP 15" 1.83 = ATI Mobility Radeon X1600 with 128MB of GDDR3 SDRAM and dual-link DVI
MBP 15" Glossy = ATI Mobility Radeon X1600 with 256MB of GDDR3 SDRAM and dual-link DVI
MBP 17" = ATI Mobility Radeon X1600 with 256MB of GDDR3 SDRAM and dual-link DVI
http://www.ati.com/products/MobilityRadeonx1600/index.html
http://www.ati.com/products/mobilityradeonx1600/specs.html

Similar Messages

Does Boot Camp provide video drivers and all ???

Does Boot Camp provide video drivers and all ???

But I thought that video drivers was not avaible yet ???
otherwise I would be playing BF2 instead of surfing thsi forum '

Hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game on the windows and i cant find a proper program to actually setup the game someone help me please

hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game called guild wars 2 and i cant find a proper program to actually setup the game

Only if you decide to share with us your particular situation. Guild Wars should install and run like any other Game. Other than the Game Installer, Games don't need some other installer to make them work. Only someone who reads the instructions for the proper installation.

Can I use Boot Camp and Parallels 5???

I have a windows 7 partition w/ boot camp. I was wondering if I can also have parallels 5 too. Here is a example, Can I use boot camp for my games and use parallels for little stuff and internet? I want both! Can I do this? I am thinking about getting parallels 5.

Hi,
with earlier Windows versions (XP or Vista) this was definitely possible to do.
I am not that sure if there are problems with Windows 7 doing this.
Have a look at the Parallels Support Forum here http://forum.parallels.com/
Regards
Stefan

Problems with Boot Camp and Drive Partition

First of all, let me preface this by saying I have in the past successfully partitioned my drive and installed Windows, but it was a while back and I can remember it was frustrating, but I don't remember the exact details. Also, I apologize for the rambling nature of this problem, but I'm trying to give as much relevant information as possible and walk through the steps I took to get where I am now.
Feel free to skip ahead to the end, the main problem seems to be I tried to create a 300 GB partition, but it didn't take or something. Now my storage is reflecting I've lost 300 GB, but it won't recognize the existence of the new partition.
Let me just walk through what I did. I deleted my previous partition because I was having some difficulties with a few programs and the partition ended up being too small and I wanted to make a bigger one anyway. I only use it for gaming and didn't care about any of the saved games so I just deleted the partition and figured I'd start over from scratch.
Before I begin, some technical details about the computer I'm working with. I don't know how much of this is necessary, but here it is:
It's a 27-inch late 2012 iMac with a 3.4 GHz Intel Core i7 processor with 24GB RAM running OSX 10.9.4
The storage space is a little more difficult as that is part of the problem I'm running into, which I'll get to in a minute.
Anyway, I have a Windows 7 Professional install DVD and a burned CD called Boot Camp, which I think is the drivers from last time I installed Windows (a year and half ago?), but since I needed Superdrive for the install DVD I just used an XHD I had to put the drivers on (like I said, I don't remember how I did it last time). I go through Boot Camp and look at how much space I have and how big I want to make my partition.
Side note: Last time I made my partition, I'm fairly certain I set it to 200 GB, but the partition size actually came out to something like 112 GB or something significantly less. I didn't know what happened, but figured it would still be enough space and it had been such a hassle I didn't bother doing it again.
Supposedly I have a 1 TB HD, and I can't remember exactly what it said when I partitioned the drive this time, but it definitely said I was using less than half of my capacity and I had plenty of room, so I opted to go for a 301 GB partition (the slider wouldn't let me do exactly 300) which still left me with around 300 GB of space left over on my Mac partition I want to say. I went ahead with it and it started partitioning the drive with the blue line moving very slowly and after an hour or so it was like 80% across but no longer making progress. I looked online and people said that shouldn't happen. I cancelled the partition and the Disk Utility showed the partition, but said it was unmounted or something.
I restarted my computer thinking maybe I'd try and see what would happen if I tried to boot it up as if I had Windows installed. I also at that moment remembered that I'd had a similar problem last time because I had my XHD plugged into my USB port so I unplugged that and held down OPT. It then showed me my Mac HD drive and a CD icon that said Windows, so I clicked on that figuring maybe I could install it after all.
It led me through a Install manager and it got to the point where it asked what drive/partition do you want to install Windows in, I recognized the screen and remembered I was supposed to choose a certain one, but couldn't remember which one and none of the sizes seemed to match the storage I had allocated to the partition. One was about 200 GB and since the last time I did it my partition came out 100 GB smaller than I had set it for I thought maybe that was it.
However, it said I couldn't install on that drive for some reason (I can't remember exactly what it said). So I restarted again and figured I'd go back and see what I did wrong and start over. When I check Disk Utility it no longer sees any partition (mounted or unmounted or anything) and that the entirety of my HD is dedicated to Mac HD.
The problem is, now I'm getting weird reports about the size of my drive, the amount used, and the space available. Disk Utility tells me I have 1.12 TB capacity, 301 GB available, and 819 GB used. That doesn't even add up. Furthermore, when I click get info on Macintosh HD, it tells me I have 810 GB capacity, 364 GB available, and 446 GB used. When I click on About this Mac and go to System Report and storage I get this:
Macintosh HD
Available: 364 GB
Capacity: 810 GB
Logical Volume Group:
     Name: Macintosh HD
     Size: 1.12 TB
     Freespace: 301 GB
Physical Volumes:
     disk0s2:
   size: 121 GB
     disk1s2:
     size: 999 GB
Now I really don't know what to make of it. That 301 GB free space makes sense as the partition I tried to create and if I add that to the 446 GB used on my Mac partition, plus the 364 GB available, that adds up to 1.12 TB (roughly, I've rounded off these numbers).
But how come Disk Utility doesn't recognize the partition then? What should I do from here?
I couldn't find anyone asking this exact type of question or running into this same problem before, so I hope I'm not asking about something that's already been answered. If that's the case, if you could direct me to where I can find the answer I'd be appreciative.
Otherwise, any help or light that can be shed would be most appreciated.
Thanks!

The problem seems to have gone away. I did click on repair disk in Disk Utility, I'm not sure if that did anything, but now when I run Boot Camp Assistant it is showing me the correct free space, so I don't know what happened. Oh well.
Still having trouble getting the **** thing to partition, but that topic is covered extensively elsewhere.

Boot Camp and Parallels together?

I have Boot Camp and Window XP installed. I wanted to run a PC only game and was wondering if you can have Boot Camp already installed and still install Parallels and maybe use that instead when necessary.
Thanks!

Click here for information.
(38121)

Screen freezing, leopard won't load, boot-camp and parallels,

This problem started a while ago, around the time that I installed boot camp so I think it may be related. Sometimes when I am playing a DVD or a game or using something I've downloaded my macbook will freeze or automatically restart. It happened once a week or so and afterwards it wouldn't load, it would sometimes gets as far as the gray screen and the loading symbol and the freeze and restart and this would happen over and over again and would happen on the windows and mac partitions of boot-camp. I got a bit sick of it so uninstalled boot-camp and decided to try parallels instead, the problem is even worse now and the screen will freeze but will restart up to leopard fine but a while later it will freeze again or sometimes it will do as soon as the logins screen appears. What could be wrong and could it be related to having windows on my computer as it seems to happen quicker when I am on windows. Any help appreciated.

+*I'm trying to install Snow Leopard from an external harddrive*+
Is there a reason that you are trying this method as opposed to using your DVD?
Do you have a working installation of Snow Leopard on the external drive or have you tried to create a bootable image of the install media on the external drive?

HT1846 can i install boot camp and run explorer 9 on my mack

I need to be able to use Internet explorer (7 or higher) on my Mac. If I install boot camp and windows will I be able to?

Yes.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Lose airport connection after using boot camp and windows XP

After using windows XP on boot camp and shutting down windows and booting to Mac OS 10.5.7 I lose the airport connection and have to restart or reset my airport extreme base station. My imac 2.8 is connected to airport via ethernet. Air port is operating on 5.7 version. This is a recent development and suspect it is related to updates in windows. I do not know where to start but need to solve this problem as it interrupts the other computers on wireless. Thanks Carl

I have solved problem. It was in the windows settings using airport rather than ethernet connection. Carl

Lion, Boot Camp and Windows 7 Issues

Couple of questions regarding Lion, Boot Camp and Windows 7... I never had issues with Snow Leopard and setting up Windows 7 on my iMac (expcept the dreaded black screen after restart, bu got that fixed)
Let me start off with my specs and then I will ask my questions:
iMac 27"
i7 Quad Core (1st gen)
16GB Ram
1TB HDD
OS X Lion (Fresh Install - Not Upgrade)
All updates for OS and iLife and other installed software:
Adobe Creative Suite CS5
MS Office 2011
Boot Camp 4.0
Window 7 Ultimate
Ok... here are my questions.
When I fixed my black screen issues after installing a fresh copy of Windows 7 - I had to install MacFUSE and Tuxera NTFS in order to delete the the stock ATI driver so the second rebot on the install of windows 7 would work and boot correctly. After rebotting into my mac side I now always get this message from Tuxera.
What does this mean? Now in the finder when looking at the computer drives.. It does not show the BOOTCAMP partition...
However, when I resart i can hold down the ALT key and get this menu:
I know this might seem strange to ask, but why are the Macintosh HD and the Recovery HD text smoothed and the Windows text not? Being a design I see the difference and it makes me wonder why this is. (It is almost like the BSOD icon apple used forwhen connecting with shared PCs)... Anyways, I can boot into windows when clicking this drive.
After getting to windows 7 it will not let me run updated. The OS is activated and I have even installed SP1 manually, but it always tells me that the Update service is not running. When in fact it is. I have checked it and it is set to start automatically. I have reset and shutdown my computer more than 10 times... I can't figure out what the issues are.
Overview:
Why do I get the Tuxera NTFS error?
Why can I see the boot camp partion when manually selecting it form startup, but it does not show in OS X
I can't get Windows to update? Any ideas?
Thanks for any help you can provide.

These various utilities like Tuxera are incompatible with Lion. Partly because MacFuse is incompatible. You need to remove them completely.
As for the Windows partition you might consider using Boot Camp Assistant to remove it. Then make a new partition and install Windows. Remember to use the Windows formatter to format the Windows partition NTFS.

Boot Camp and Windows 7 Problems

I have found a reproducible bug with Boot Camp and WIndows 7.
Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.

Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.

Can I use Windows XP Home with Boot Camp and/or Parallels or VMFusion?

I am planning on purchasing a new Mac Mini with Snow Leopard. I have a copy of Windows XP Home Edition that came with a 7 year old Compac computer, can it be used with either Boot Camp and/or Parallels or VMFusion? I REALLY don't want to purchase Windows if I can help it. Thanks!

Read the boot camp requirements. I believe you will need a Windows disc that is stand alone. By that I mean a Windows disc that is not designed for a specific computer like your Compac. I believe that applies for Parallels and Fusion as well. Some of the newer disc that come with new computers may work since some of them are stand alone. I think your compac disc maybe married to your computer. You can try it when you get your Mac but it may not work.

Can you run Boot Camp and Fusion at the same time?

Hi,
I had boot camp installed on my mac pro and loved it. I decided to get greedy and install Fusion using the boot camp partition. The Fusion install went ok but then Microsoft started to get fussy. Every time I would do something on Fusion it would ask me to "Re-activate Windows" when I logged into boot camp. Maybe if I saw Fusion fully working I wouldn't want to run boot camp any more but I think I want to have the option to run either. Right now I only have 1 gig real memory on my mac pro and Fusion seems a little slow compared to native boot camp. Can I run both boot camp and fusion without having to buy two native copies of Windows XP pro? I don't want a "sensible" answer, I want an answer that takes into account how Microsoft treats this re-activation situation.
I guess Leopard might make this all obsolete, but until then .....
... Flash Gordon

You need to make sure to install VMware Tools into your virtual machine (while booted into Windows via Fusion). Once you do this you shouldn't have to continually activate Windows when going back and forth from Boot Camp to Fusion. I've seen this discussed over on the VMware Fusion discussion boards, so you may want to look there for more details.
Also, if Windows starts telling you it's been activated too many times, you can call Microsoft and they'll give you an alternate activation key. The phone number is listed on the Windows error screen. I had to do it and they were very accommodating. I just told them I was running Windows in a virtual machine, and there were almost no questions asked.
You don't need to buy 2 copies of Windows to run both Boot Camp and VMFusion.

Unable to install Boot Camp and Windows 8.1 on Mac Mini

Hello,
My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
Thanks,
Doug

Poking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
So, I'm doing exactly what I did before (I think), but now the windows installer won't start.

Installing Windows 7 RC1 with Boot Camp AND Parallels?

I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

Boot Camp and Video Games

Similar Messages

Maybe you are looking for