Boot camp assistant and disk burning

when i turn on bootcamp assisyant it always closes and starts thw same routine over again. as a result I can't burn a disk. Am I doing sometj=hing wrong or am I having trorble with my boot camp?

I can't answer your question except to say that if you post it in the Boot Camp Public Beta forum, you would probably get quicker and more responses.

Similar Messages

Boot Camp Assistant: Using disk utility? (PLEASE HELP!)

I am trying to download Windows XP with boot camp and I waited for the disk to be partitioned (I'm not even really sure what that means) and then it says:
The disk cannot be partitioned because some files cannot me moved. Back up the disk and use Disk Utility to format it as a single MAC OS Extended (Journaled) Volume. Restore your information to the disk and try using Boot Camp Assistant again.
Okay, so I went to Disk Utility and now I have no idea what I am supposed to do. Please help!

If you use Time Machine you can reinstall Leopard and then using the Install Disc go to the Utilities and go to the Restore from Time Machine. You can restore your new drive to any of the saved days. It would save them to the hard disk defragmented. Another program is SuperDuper! which can make a clone of your Macintosh HD to an external disc as a bootable option. This is easier and faster though this program has not been confirmed to work with Leopard yet. And as I said before you can buy iDefrag for $30 and not have to restore and erase anything. But what ever you do, make sure to back your files up.

Is it possible to bypass the number of partitions limitation (no more than 2) when trying to boot into windows by not using boot camp assistant, and instead just partitioning the drive manually?

I can't find a specific answer to this question.
I did have a functioning Windows 8 installation on my MacBook Pro previously. I tried to make a third exFAT partition so as to have a drive mutually readable/writable to both operating systems. This made it so I could no longer boot into my Windows installation.
I know I'll need the boot camp drivers installed on the Windows installation after the fact, but would manually creating a partition and installing the OS without Boot Camp Assistant work? And would I be able to boot from it while having a total of 3 partitions?

That's the spirit!
Just be sure to have your OS X junk safe in a tested backup, in case the whole thing craps out and you end up having to do a low-level partition and erase of the entire drive.
And like I said, the problem is not OS X. I've set up mine at least once with 4 partitions holding as many flavors of OS X as can run on the hardware, all perfectly bootable on demand.

Boot Camp Assistant / Disk Utility Stuck during Partitioning

Hello Apple / Apple customers,
I have a 15" MacBook Pro (Mid-2010) with a 320GB hard drive. I recently partitioned my hard drive to install Windows 7 in order to install and play a Windows game. Everything installed fine, but I discovered that I didn't have enough space partitioned to fit the game (I did not anticipate it taking 14 GB to install). So I deleted the partition. Now I'm attempting to make a larger partition and restore a Winclone image that I made of the previous partition on that new partition. The problem I am receiving occurs when I attempt to make a new partition in both Boot Camp Assistant and Disk Utility. During the partitioning process, Boot Camp Assistant stalls at about 30% and stays that way for hours, and Disk Utility also stalls during the "shrinking disk" part at about 30% as well. Is there anyway that I can fix this? I already tried repairing my hard drive by running Disk Utility via the Installation Disc, and it says that my hard drive is fine. Thanks in advance for the help.

Reinstall Leopard, but first use the Leopard install DVD Disk Utility to reformat the HD to one partition. See:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh14.html
It's for Tiger, but applies for Leopard as well.
WARNING, you must have your data saved somewhere else.
Message was edited by: xnav

I'm trying to install Windows XP on my Leopard 10.5.8 using Boot Camp Assistant but when it restarts it says I should insert a bootable disk even though I didn't remove the installer from the drive. What should I do?

More info: I'm using an external CD drive because the built-in one doesn't work for some reason.
Also I went back and deleted the partition (also using Boot Camp Assistant) and just gave up on installing XP, but now every time I turn on my macbook I have to press the Option key to mount the Mac HD. If I don't, it returns to the black screen that says I have to insert the bootable disk and press any key. How do I stop this problem? I've already verified the disk and permissions, plus repaired it. It's still the same.

Go into your system preferences and click the startup disk icon then select your Mac HD.

Unable to install Windows 7 pro after restart by Boot Camp Assistant

Hello,
I have an issue with installing windows 7 pro 64bit on my MBP 13" mid 2009.
It has 500GB Samsung HDD.
I tried to install windows 7 on a boot camp partition with boot Camp assistant and also during the process, I
downloaded the driver helpers from apple website and burned it on dvd. after system restart, It starts to load windows
files and then asks me to give it the cd of drivers [ right after I select the country and language in the start of the setup ]
I tried to select the files of the cd [ which I burned by the boot camp assistant ] but it just keeps telling me there is
NO suitable driver matches my mac.
I have downloaded the genuine windows 7 and burned it on dvd.
Also I have Lion, Boot Camp 4.0.1
Can someone please help on this issue?
Many thanks,

The partition table needs to be repaired.
That is why the guide asks to backup before you begin.
Try Lion Recovery and check health of all the partitions.
Sometimes repairing or try shrink and expand the partition.
But it is not uncommon for what happened to you to render the drive with smaller HFS and then require erase the drive in some cases and restore.
Carbon Copy Cloner 3.4.2
Cloning as a Backup Strategy
CCC is now able to also clone Lion's Recovery Partition as well.
Check partition table health in Lion's Disk Utility
Create Lion Recovery Drive
Lion Recovery Mode

Boot Camp Assistant fails on Windows 7 Enterprise software assurance DVD

I've been struggling all morning with this and thought I'd post to help others that might encounter this problem. I'm trying to use Boot Camp Assistant 3.0.1 on an Early 2009 20" iMac to install Windows 7 Enterprise. The disc I was using was a genuine Microsoft DVD sent to us through our Software Assurance program. For the life of me I could not get Boot Camp Assistant to recognize that the disc was inserted into the drive. I didn't find an answer to this problem, but I did find that downloading an ISO of the Windows 7 Enterprise installer from Microsoft's Volume License Service Center site and burning it with Disk Utility to a DVD-R was immediately recognized by Boot Camp Assistant and the install proceeded normally.
The disc that didn't work is labeled:
Microsoft Windows 7 Enterprise
32-bit x86 Upgrade: Pre-existing OS License Required
(Volume License Product Key Required)
DVD
September 2009
Software Assurance
Windows
End Item Part No.
FYC-00127
(barcode)
X15-72936
If you're unable to get Boot Camp Assistant to recognize a DVD that you received from Software Assurance, you might have better luck burning your own DVD-R from an ISO downloaded from Microsoft.

"The disc that didn't work is labeled:
Microsoft Windows 7 Enterprise
32-bit x86 Upgrade: Pre-existing OS License Required
(Volume License Product Key Required)"
It appears you were attempting to install an upgrade version. Did you have a previous version of Windows installed and were you upgrading, or were you trying a new install using an upgrade dvd?

Trying to install Windows 8.1 from an ISO, but boot camp assistant doesn't seem to recognize

Hi there,
I have a 2011 Macbook pro, 15", 2.2 GHz Intel Core i7, 8GB RAM. I'm wanting to install windows 8.1 using boot camp assistant, and downloaded windows 8.1 from dreamspark (Microsoft store for students). I have downloaded all of the windows support software onto a USB, and there is a folder sitting on my desktop containing the .ISO for windows 8.1. However, when i try to run boot camp assistant, it says that the installer disc could not be found, and does not give me an option to install from a selectable .ISO. Can anyone help me with this? Is it something obvious I'm missing? Thanks!
Connor

For Macs with built-in Optical drives, you will need to burn the ISO to Optical media and use the Optical drive.

Can I download boot camp support software outside of boot camp assistant?

I've been able to install windows 7 with boot camp assistant and an external cd/dvd drive. I have not, however, been successful at downloading and applying the boot camp support software. It has either not loaded onto a USB drive, or will refuse to write to a CD. Is there a solution to this, and/or can I download the up-to-date support software from another machine, burn it to disc and run it in windows (as older versions ex. 3.1, seem to be .exe files)?

Can you use this link Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support or Boot Camp Support Software 4.0.4033?

Boot Camp Assistant stops at 50 % when trying to download Windows support software. Help! : (

Hello.
I am just trying to install Windows on my late 2011 Macbook Pro. I clicked "Finder" -> Utilities -> Boot Camp Assistant and started downloading Windows support software. Problem is that it is stuck at 50 %. Is this a known problem? How do I solve it? Do I just have to be patient? Is there another way around?
Also, do I need an actual CD to burn or can I use an external hard drive?
I appreciate any help I can get : ) I don't know much about boot camp.

Welcome to the Apple Support Communities
Try downloading the Windows support software from the Support site > http://support.apple.com/kb/DL1638
Apple only supports now the external drive as the method to install the Windows support software, but if you download it from Apple Support, you can decompress the file downloaded, right-click the folder with the drivers and burn them into a CD/DVD

Can't get past gray screen after Boot Camp Assistant

So last night I decided it was time to start experimenting with Boot Camp and Windows XP Pro. I fired up Boot Camp Assistant and allocated a 32gb partition of my HD for the XP install. When prompted, I put in the XP Pro CD and restarted. It booted into the XP install utility, but when asking about which partition to use, instead of the 32gb partition, all I saw was a 131gb partition. Thinking that it was my OS X partition, I decided to cancel out of the install and do some more investigating. When it restarted, all I got was a blank gray screen, no spinning gear, no logos, nothing. When rebooting while holding down a mouse button, I was able to eject the Windows XP cd. Here's what I've tried so far:
CDs: Leopard, Original OS X Disk 1, Windows XP, None
Keys: none
Result: Gray screen
Keys: option
Result: Gray screen with mouse pointer that initially is moveable, but then freezes
Keys: c
Result: Gray screen
Keys: d
Result: Gray Screen
Keys: shift
Result: Gray Screen
Keys: command + r + p
Result: Gray Screen
Holding power button
Result: Long tone while starting up, then gray screen.
What can I do?? I'm thinking that Boot Camp fried my HD partition data, but I can't seem to access any of the boot disks or any sort of disk utilities

I did. I took it into the Apple store and they replaced my hard drive. It was under warranty, so it wasn't a problem. I got them to give me my old hard drive back, which I hooked up to an external SATA enclosure. My mac recognized it, but said it wasn't initialized. I downloaded Data Rescue II and it recovered all of my software. I'm now using it as a Time Machine disk.
After further research, I found out the my main problem was that I used Windows XP SP1. You NEED to use SP2, otherwise, this problem will occur. I figured I could just upgrade later, but nope, you need a native SP2 disk.
If your Mac isn't under warranty, try this post:
http://phail.net/2008/04/10/bootcamp-windows-xp-sp1-epic-phail/
and his solution:
http://phail.net/2008/04/13/bootcampsp1-white-screen-of-death-a-solution/
In short, you need another Leopard computer. I bet if you print out the instructions and take them to the Apple store with you, the Genius Bar will help you, they've always been super helpful/nice with me.
Good luck!!

Boot Camp Assistant hangs at partitioning process?

Hello,
I'm trying to install Windows on my Mac Pro. But when I run the Boot Camp assistant and assign the Windows partition, the Boot Camp Assistant hangs at the process of partitioning. The progress bar just keeps on moving, but it wont finish the partitioning.
Screencap link: www.laspalmas.nu/hang.jpg
Sorry, the OS language is in finnish but "Osioidaan levyä..." = "Disk partitioning..."
Does anyone have advice, why does this endless hang happen at this point?
Thanks for the replies,
Lauri

BACKUP before you start.
Repair your drive.
Would help to know how much of the free space is actually in a large enough unfragmented single chunk.
You may need to backup / initialize / restore.

Repartitioning after Boot Camp issue and questions

Hi,
I recently installed windows XP via Boot Camp, and wanted to chop up my "Macintosh HD" partition into two so that I have a data partition for personal storage. I'm using Disk Utility to do this, it has been running for 8 hours. I checked the number of system calls that Disk Utility is making and it seems that it is making a couple of hundred per second. I was hoping people would help me answer the following:
1. is it normal to take this long? even windows defragmenter works faster
2. if it completes, would mac os x still recognize the XP partition and boot from there?
Some people out there must have done this, is there light at the end of the tunnel?
Thanks a bunch in advance!
Tom

You can't get the result you want following the steps you told me you followed.
Once you have created the mac partition and installed you can only create the windows partition using boot camp. You cannot do a live partition of the original leopard boot volume to create another mac partition on the same drive.
You also cannot partition a partition using Disk Utility, the only software available on the mac to partition a partition is Boot Camp Assistant and it can only do the partition when booted to the Leopard startup volume on which it is to be created.
If you want to have a further data partition on the same drive you need to create it at the beginning using Disk Utility to create that partition.
In your case that would be the data partition you wanted to create.
The drive must use the GUID partition scheme.
The Leopard individual partition (which will eventually be live partitioned to accommodate Windows) must be formatted for mac os x extended journalled.
The data partition can be formatted with any allowed format and can be changed when you decide what format you want.
Once these 2 partitions have been set up you can only use boot camp assistant to modify the partitioning and then only to create a boot camp partition on the volume that has leopard installed.
The Leopard partition, once partitioned with Boot Camp Assistant, can now only have its partition modified by destroying the original boot camp partition and then setting it up again.
You normally cannot partition a partition without destroying all data on the volume that the partitions are created on.
This live partition is an innovation that was included so that those who wanted to either remove the boot camp partition or wanted to change the size of the partition would be able to do so, without also destroying their Leopard startup volume.
Read my instructions again, the process you describe does not match what I have posted.

Installing Windows 7 using Boot Camp Assistant

I want to install Windows 7, but my iMac came with Boot Camp 3.0.1. Apple says that I need to update my Boot Camp to 3.1. But when I go to the appropriate support site and download the 3.1 32-bit version, I get a message stating: You have chosen to open BootCamp3.132-bit.exe. Is this the right file? It has an .exe extension and my web browser's download utility (Firefox) doesn't know what to do with this file. Am I doing something wrong?

Hi,
I got my first Mac a few weeks ago and I feel into this problem. What you need to do is from your Mac launch Boot Camp Assistant and install Windows 7 (I recommend Windows 7 64bit version) as per the normal Boot Camp process.
Once you have Windows 7 installed, boot into Windows and then download the latest the Boot Camp Assistant update for Windows i.e. the .exe file you downloaded before, and install on Window 7. Make sure you get the right version as there is a 32bit and 64bit version.
I short the .exe is only to be installed on your Windows partition and is nothing to do with Boot Camp on your Mac.
FYI - if like me you find that after a while you have made your Windows partition to big and want to repartition to give some space back to your mac check this Website out - it works a treat, but always remember to backup any data before hand JIC http://www.twocanoes.com/winclone/

I CANNOT USE BOOT CAMP ASSISTANT 4.1 ON MAC BOOK PRO 15 INCH

i installed windows xp using boot camp Boot Camp Assistant 4.0.1 version, which was on system along with macbook pro 15", quad core processor,
windows were also installed with the partitions, but after windows were installed, drivers were missing and wen i went back through options to open boot camp on mac os it boot camp was nt working, i deleted the partion where i installed windows xp, and then too boot camp options to make partion is nt showing, kindly guide to repair BOOT CAMP ASSISTANT, and also how can i upgrage my Os frm lion 10.7.3 to mountain loin.

Reinstall OSX using the online recovery.
Then use Boot Camp Assistant. One of the Boot Camp Assistant menu items is download the Windows Support Software (drivers). Make sure you follow the Boot Camp instructions.
Or, Reinstall OSX using the online recovery.
Then install a virtual machine like Parallels, Fusion, or VirtualBox. Then install Windows in the virtual machine.
You can use either Boot Camp or a virtual machine to install Windows. Neither method requires any driver cds.

Boot camp assistant and disk burning

Similar Messages

Maybe you are looking for