Boot Camp Assistant can't be used due to ROM Firmware

Hi, I'm running:
OS X: 10.9.5
Build 13F34
Mac Book Pro Mid 2010
Boot-ROM-Version: MBP61.0057.B0F
SMC-Version (System): 1.58f17
Even though alle updates available are installed, my boot camp assistant tells me, that it can't be used due to the ROM Firmware version. That is a huge problem for me, because I want to delete my bootcamp partition and I can't right now, because the only way to delete the partition is via the boot camp assistant while on mac OS X...
Does somebody know how to fix the ROM Firmware issue or a workaround to delete the partition without using the BCA (Boot Camp Assistant) ?
Thanks
-B

Please see EFI and SMC firmware updates for Intel-based Macs - Apple Support . This is what you should have
MacBook Pro (13-inch, Mid 2010)
MacBookPro7,1
MBP71.0039.B0E (EFI 2.5)
1.62f7 (SMC 1.6)
MacBook Pro (15-inch, Mid 2010)
MacBookPro6,2
MBP61.0057.B0F (EFI 2.6)
1.58f17 (SMC 1.7)
MacBook Pro (17-inch, Mid 2010)
MacBookPro6,1
MBP61.0057.B0F (EFI 2.6)
1.57f18 (SMC 1.7)
Since you have a 15-in based on what you have posted, please try a Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support and How to Reset NVRAM on your Mac - Apple Support.

Similar Messages

Boot camp assistant: Can't install the software because it is not currently available from the Software Update server.

Error: Boot camp assistant: Can't install the software because it is not currently available from the Software Update server.
OS 10.9.1
iMac 27-inch, Late 2009
Boot Camp Assistant Version 5.1.0 (473)
Every time I run this I get the above error after I hit "Continue" on the "Save Windows Support Software" page and subsequently hit "Download Windows 7 Support Software."
How do I successfully install 64 bit WIndows 7 on my iMac?
Thank you!

Waited a month and tried again with the same result. What gives? Does Apple no longer support Bootcamp with Windows 7? Do they not read these posts and help out customers? If Apple doesn't care and won't help, can anyone else suggest something? My large company does not like Apple and barely supports those of us who buck the trend and buy Macs. If I have to buy a PC to support their software to work from home this only gives them more "ammunition" to decline to support Macs. Any advice anyone can give would be greatly appreciated!

Boot Camp Assistant: "Can't move files"

Hi,
I'm trying to create a 500GB partition with BCA and it keeps giving me the "Can't move files, back up data, format, etc." error.
I've currently got a 2 TB HD; the first time I attempted this I had about 633GB of data on the drive, so about ~1350GB free. I received this error so I bought iDefrag and let it run for a long time (~14 hours or so) until it was finished, and again I received the error.
(Prior to defragging I verified and repaired permissions through Disk Utility)
So I transferred a 110GB file over to my external drive, deleted off ~150-180GB of movies and TV shows (which are safely stored on another computer), culled some other stuff, did a verify + repair permissions, and now I'm only using 378GB of a 2TB disk.
It still won't work. I really, really, don't want to format and restore my info.
Any idea's how I can get this working? Thanks

Clone your drive and erase restore
iDefrag has to be run from a CD you burn, or from another hard drive. I definitely favor always having bootable clone backups for OS X.
Has to not have locked files where installers can place there
Boot CAmp Assistant should have iDefrag capability, but it doesn't (should also by now just be part of Disk Utility too).
Partitioning relies on not just free space, but contiguous and unfragmented.

Boot Camp Assistant: Can't Partition Drive

I've been trying to partition my hard drive using the Boot Camp Assistant so I can install Windows XP. However, whenever I try to partition the drive, I get an error message saying that my hard drive needs to be a single Mac OS Extended (Journaled) volume. I opened up Disk Utility to see what was wrong, and it said that my only hard drive, Macintosh HD, was formatted as a Mac OS Extended (Journaled) volume. I tried bumping the partition size down from 15 gigs to 12 gigs; the progress bar was a little under 25% full when I got the error message again. I'm planning on arranging to get support at an Apple Store, but I wanted to see if anybody on here knew what to do first. Any ideas?

JadeH wrote:
okay so i did what you said and i selected restart under superduper clone so i could test to make sure the clone worked...but now i can't get it to restart under my Macintosh HD. the clone works fine but it is on my external hard drive. i need y internal hard drive to be my start up disk so i can use boot camp assistant. i went to system preferences->startup disk but it only shows my clone on my external hard drive. any suggestions?
When you tested the clone, did you change the default boot to the clone? You should have simply booted by holding down the Option key.
I don't know what happened to your HD or original OS, but if you reboot and hold down the option key, your original OS should show up in the selection menu.
If not, boot into the Leopard DVD (press "C" key during boot) and after the language screen, in the menu, top left under Utilities select disk utility and run it, repairing HD and permissions. Then see if you can reboot into the original OS. You may have to hold down Option key again until you boot it and change the default back to the original OS.

Boot Camp Assistant Can't Move Files? Image won't save ('resource busy')

I've been trying to set up boot camp and every time I go to partition the drive I get this message:
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
My drive is already set up as an OS Extended (Journaled) volume. I went to try to save a disk image and it won't save b/c it always says resource is busy. Well obviously I need to use the computer to back up it's own hard drive so of course it's busy.
Any help is greatly appreciated. Thanks.

Are you sure you had enough free space on the drive for the Windows partition you tried to create? Have you tried repairing the drive?
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Boot Camp Assist can't partition hard drive

Boot Camp won't partition my 500GB internal HD. I get the message:
"The startup disk cannot be partitioned or restored to a single partition. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." I had recently used SuperDuper to replace my original single partition internal HD with the new 500GB HD with three partitions. I had not setup Boot Camp on the original HD. After getting the Boot Camp Assist error message on the new HD I used SuperDuper to clone back from my original HD (which was now external) with a single Mac OS Extended (Journaled) volume. I then ran Boot Camp Assist again and got the same message. I ran Disk Utility Verify Disk Permissions and got some errors which I then successfully repaired. I still get the same Boot Camp partition error. Any suggestions?

When you partition your drive you are given the option to format it for OS 9, if you choose this option your drive will be formatted to be incompatible with Boot Camp. This incompatiblity will remain when you put it back to a single partition unless you go to options and select the top radio button (format for Intel Mac) to create a GUID Partition Table (at least that's what I did and it fixed the problem).

OS Mavericks - Boot Camp Assistant can not download windows support software because it is "not currently available from the Software Update server."

When trying in install windows 7 on my mac, the Boot Camp Assistant attempts to fownload windows support software. However, the program continues to return the following error: the windows support software "not currently available from the Software Update server."
Is there another way to get this software?

64 bit. I found the support drivers and got the windows installation done. When trying to run the 64 bit support drivers in Windows 7, it says my computer doesn't support 64 bit. Sooooo.....
I'm assuming I have to download the 32 bit support drivers for Windows 7.
Correct?

I receive the following message under Boot Camp Assistant: "Can't install the software because it is not currently available from the Software Update server.

I am trying to install the software drivers for Windows 7 Home using Boot Camp 4 Assistant. I receive the following message: "Can't install software because it is not currently available from the Software Update server." Why is this happening?

You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/

Boot Camp Assistant can't see Installer Disc

I had an XP Home SP1 install disc which obviously won't work with Boot Camp. Following Microsoft instructions, I created a new install disc with my SP1 disc, integrated SP2, and included the boot image file.
When I then attempt to install it on my Boot Camp partition, I get the message 'The installer disc could not be found'.
Yet, when I start up my Fusion VM (which has Win XP installed on it), that same disc is recognized and even brings up the splash asking if I want to install Windows.
Please help. Thanks everyone.

Does anyone have any information on my problem?

Boot Camp Assistant cannot be use

Every time i try to start up my bootcamp, it tells me that " Boot camp assistant can not be used, This mac does not support Boot Camp" i've have run boot camp on this computer before with a different hard drive. that one blew up i just got another that was same exact one but different name bran. i don' t know how to fix this anyone that can help me i will greatly appreciate it.

Your Model Identifier and Model match How to identify MacBook Pro models - Apple Support.
From Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support it should be supported.
MacBook Pro
(15-inch, Mid 2012)
5
5
4
Was the Bootcamp info.plist modified on this Mac? How was the OS installed when the original disk drive failed?
Can you click on System Report -> SATA/SATA Express and PCI to see if your internal drive shows up? Do you have more than one physical drive in this machine?

Boot Camp Assistant doesn't open (Info.plist)

Dear All!!
I just have changed my Boot camp Info.plist to make it support making USB installing drives on my Mac, after i changed Info.plist Boot camp crashes and then it didn't run after several attempts, then after searching for solutions i open terminal and write the code sudo codesign -fs - /Applications/Utilities/Boot\ Camp\ Assistant.app, then it appears as /Applications/Utilities/Boot Camp Assistant.app: replacing existing signature. After that i still can't open my boot camp assistant app, every time i try to open it, a message pop up like, "Boot Camp Assistant can't be open error -1712
I'am beginner here using Macbook Pro 13,, OSX 10.9.4 Mavericks
P.S Help me in his regards if you can, I'll be thaksfull to you :-|

Put the .plist you altered on the Desktop, restart and test.

Why does Boot Camp Assistant say...

"Boot Camp Assistant can not run until you upgrade your sytem software to the latest version."

I used DG3 to initialize the HD, which essentially erases the disk if I understand correctly. I haven't used Superduper before, so perhaps that's worth looking into.
I did mentioned the use of DG3 to ensure that I had a single disk partition. I guess the restore from a clone or Time Machine was implied...
;o)
Thanks for putting some effort into helping me. I'll look at Superduper and let you know if that gets me anywhere...

Can i install windows 8 on my mbpr using boot camp assistant?

can i install windows 8 on my mbpr using boot camp assistant?
pls help

Go to the Bootcamp forum where the Bootcamp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

No. There is no other location. Be patient. Read the posts in the Bootcamp Forum. There are hundreds of posts about your issue and what to do. https://discussions.apple.com/community/windows_software/boot_camp

Problems installing Windows 7 using boot camp assistant

I have followed the guide form the Apple website and using boot camp assistant, I have managed to install Windows 7 Home Premium up to a point.
When the IMac re-boots and starts up in Windows 7 it tries to complete the installation but neither my mouse, keyboard or trackpad work.
This means I cannot enter a computer name in the first windows 7 screen, which in turn prevents the completion of the installation and the installation of the drivers for the keyboard, mouse and trackpad.
Does anyone have an idea how I can complete the installation?
I am using a 2012 IMac 27".
Thanks

Hi,
yes I used boot camp for everything and followed what was advised on the Apple web page. The USB remains in the back of the machine and it did download the windows drivers etc, but it doesn't seem to have installed them yet.
If I'm reading help manual properly, it is supposed to install them after windows 7 has been installed. But I can't get past the first Windows screen asking me to name my windows computer.
If I obtain a USB keyboard will that run without any drivers being required?
Thanks

Boot Camp Assistant can't be used due to ROM Firmware

Similar Messages

Maybe you are looking for