Boot camp assistant says "not enough space" with 35GB available!
I have recently cleared space on my hard drive to accomodate a 64bit Windows 7 partition, which I wanted to make with boot camp assistant.
I made absolutely sure I had plenty of space; in fact, I have no less than 35 GB of space available on my startup disk. HOWEVER, the amount of space on my hard drive seems to be constantly changing. I believe this is due to time machine's hidden background backups which automatically fill up an expandable partition entitled "mobilebackups".
Boot camp assistant constantly gives me the following error: "The startup disk does not have enough space to be partitioned. You must have at least 10 GB of free space available."
This is on a 2.2GHz 15" SR MacBook Pro 2007 with 6GB RAM. I am running 10.7.1 (LION). Perhaps this has something to do with the recovery disk or the mobilebackps partition being treated as one or more separate partitions, as boot camp will only partition a drive with a single partition. However, I have not heard of this error anywhere else.
Thanks for your help in advance! I am a rather experienced user, so feel free to use advanced terminoligy if you wish.
PS Attached are screenshots of the error message and of my HD's info (free space highlighted)
After restoring, I lost my Recovery HD partition. I am currently working to get a new one. Perhaps I will install it AFTER boot camp is finished, which might solve the multiple-partitions error? I could use some advice here.
At this point, bootcamp is giving me a new error which says some files cannot be moved. I am moving this to a new discussion HERE:
http://discussions.apple.com/thread/3298756
Thanks for your help! Please respond to my new thread if you think you can contribute.
Similar Messages
-
When syncing with i tunes message comes up saying not enough space and i cant understand why as ipad is 16GB
- Because as the message says what you want to sync to the iPad exceed the space available on the iPad. You either have to sync less to the iPad or delete some items from the iPad.
- Also, in the colored bargraph that shows the distribution of storage on the iPad, how large is the "other" category? If larger than about 1 1/2 GB then restoring the iPod should reduce that so you can regain that storage. -
I transferred my files, including iTunes, to a new computer. When I go to sync, it says I'm still synced with the old, do I want to erase and resync. AND then it says not enough space. What to do?
Pictures, assuming they were taken with the device, can be copied off at any time. This has nothing to do with syncing.
If the pictures were instead synced to the device via iTunes, they are not the original images. Instead, they are optimized copies of the originals for display on the iPhone. There is software that can extract them, google it.
Where is the backup of the computer? And before you ask, the iPhone, like all iDevices, is not and has never been a backup device. -
I am using an iMac, 8.1, early 2008. I installed Windows XP at that time. I am now using OS 10.8.5 and want to remove the Windows partition to free up disk space. Boot Camp Assistant does not allow me to select the "install or remove" option. How can I get rid of the Windows partition?
You can try removing it in Disk Utility.
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the Disk Utility main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. Select the bottom rectangle/partition. Click on the Delete [-] button below the sizing window to remove it. Click on the Apply button. Wait until the process has completed.
4. In the lower right corner of the sizing rectangle for the remaining partition is a resizing gadget. Select it with the mouse and drag it all the way down to the bottom. Click on the Apply button and wait until the process has completed.
You should now have a restored single volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work. -
Boot Camp Assistant does not allow partiton when my disk is the right format
Boot Camp Assistant does not allow partiton when my disk is the right format - (Mac OS Extended (Journaled) volume).
When I go to the Boot Camp Assistant to partition the Macintosh HD disk, an error comes up saying,
"The disk cannot be partitioned because some files cannot be moved
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
Please help me out! I would really appreciate it!I was not allowed the Repair Disk option. I tryed Verify Disk, and an error came up saying,
"The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."
What should I do? -
Boot Camp Assistant says Install rather than Partition
I have a second gen MacBook (Intel core 2 duo) I installed Windows XP via bootcamp back when I had OSX Tiger. Today, running OSX Lion, I deleted the windows partition with boot camp assistant, wanting to increase the hard drive size and install Windows 7. I successfully deleted the windows xp partition, and restarted the computer. Now I want to repartition the hard drive and install windows 7. I open boot camp assistant, click continue (only option) check 'install windows 7' and not 'download the latest windows support software from apple' as I already have this on an external hd and click continue. I choose the hard drive size, and boot camp assisnt has the option to 'install' and NOT 'partition'. I dont know why this occurs. anyway, if I click install, boot camp assistant says 'the installer disk could not be found' even though my windows 7 dvd is in the computer.
So, my question boils down to, 'why can't i partition my disk for windows 7?'
Any help would be greatly appreciated! Thanks!After restoring, I lost my Recovery HD partition. I am currently working to get a new one. Perhaps I will install it AFTER boot camp is finished, which might solve the multiple-partitions error? I could use some advice here.
At this point, bootcamp is giving me a new error which says some files cannot be moved. I am moving this to a new discussion HERE:
http://discussions.apple.com/thread/3298756
Thanks for your help! Please respond to my new thread if you think you can contribute. -
I just purchased a new iphone 4S and I'm trying to loan some music from itunes. I keep getting a message that says not enough space on my phone. I checked my phone and I have 5.1G available. I deselected all the songs on my itunes to try and get it to sync and I keep getting the same message. Any tips?
Hey csumner1,
Thanks for the question. I understand you are receiving a "Not enough free space" alert when attempting to sync your new iPhone 4s. The following article may help to resolve your issue:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Resolution
Try disconnecting and reconnecting your device, then syncing again to solve this issue.
Orphaned files may remain on your iOS device if it is physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, the Capacity indicator in iTunes may report a large amount of "Other" disk usage for the iOS device. To resolve this issue:
1. Turn off the music or photo sync option in iTunes for the device.
2. Click Apply to sync the changes to the device.
3. Turn the music and photo sync options for the device on again.
4. Click Apply again to try to sync the device to iTunes.
- If the 'Not enough free space' alert appears, continue to step 5.
5. Turn off the automatic syncing functions for the iOS device. To do this:
- Select the iOS device from the iTunes window and click the Summary tab.
- Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
- Click Apply to sync the changes to the device.
- Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes.
If the 'Not enough free space' alert appears, continue to step 6.
6. Restore using iTunes.
Thanks,
Matt M. -
I upgraded to an Iphone 5 and open new Icloud account, I then backed up my phone on my brothers Mac Pro, I now want to restore my info to my phone and I get a message that says not enough space. What do I do
Delete all back ups on MacBook and create new back up. Restart his MB and attempt to restore again. Do not forget to erase your iphone 5 before restore.
-
I received a pop up box saying Not Enough Storage with two choices. Close or Settings but when I tough either one nthing is happening and my ipad seems to be frozen
Has any one got an idea?Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
i cant import no more videos on my imac is saying not enough space. i erase videos but still keep telling me that.
Obvious questions: how big is your HD? How much free space on it?
-
i plug in my iphone 4 and i loss all contact... i try to backup restore but its error say not enough space. please help me. i want only my contact backup restore not everything. so i dont know how can i do ?
Try to connect in recovery mode to restore, without using the latest backup, explained here:
iOS: Unable to update or restore -
Hi I reinstalled skype, as it was giving problems.But still says not enough space, when i try to ring someone.
Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.
-
Why does Boot Camp Assistant say...
"Boot Camp Assistant can not run until you upgrade your sytem software to the latest version."
I used DG3 to initialize the HD, which essentially erases the disk if I understand correctly. I haven't used Superduper before, so perhaps that's worth looking into.
I did mentioned the use of DG3 to ensure that I had a single disk partition. I guess the restore from a clone or Time Machine was implied...
;o)
Thanks for putting some effort into helping me. I'll look at Superduper and let you know if that gets me anywhere... -
I did backup from itunes.then i deleted some of my whatsapp messages.now i want them them.but when i try to restore it says not enough space to recover.what do i do?plz help.i need those messages
Hello, peppertwist.
Thank you for visiting Apple Support Communities.
When receiving the not enough space alert, he is the best article to go through.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Cheers,
Jason H. -
I sending a iphoto slideshow to idvd but I get a message saying not enough space on disc. I have plenty of space. Please help
How big is your HD, and how much free space on it?
Maybe you are looking for
-
I understand that R in RICEF entails the development of custom reports. However, how do we go about testing the custom report? Do we need to go to each table/screen the and see if value is correct? Does it typically involve testing only a sample?
-
Grainy results when converting CR2 to JPEG
I'm processing raw images (.cr2) that have been taken under low light conditions. Originals in raw don't exhibit as much grain as the conversions to jpg. Is there an way to minimise the problem?
-
I'm about to buy some Lightscribe DVD blanks......but want to know if +R or -R is better. The burner I'm using from OWC will handle both and the will primarily be used in household DVD players.
-
InDesign won't Startup Mac 10.8.2
I saw other discussions regarding this but couldn't find an answer that worked for me. I already tried creating a new user and renaming my preferences - neither worked. Here's the error message I get: http://pastebin.com/YmkR7czk I have CS5 InDesign
-
Single click to execute automator script
Relatively new to auto.., I created a workflow and saved the file. When I click on it, automator loads and sits there. How do I make the saved file a single click run? Kinda like an EXE in <sorry> Windows.