Boot camp black screen with blip

So i was installing windows 7using boot camp, everything was going well intell i got to pick which drive to install. it stated installing the files then said files cant be loaded. I tryed to repeat the process but got the same message. So i restarted my mac, now its just sitting at a black screen with a blip in the upper left cornor of the screen like if i was to type something. Iv restarted serveral times, and its the same screen. I cant get back to the windows start screen or my mac screen. i read one a post with a similar problem but it says to take out the windows disk in the drive, i wont let me force eject it or even eject normaly. What can i do?

And you don't know how to get back to OSX? Did you read the Boot Camp directions (they are on the first screen in Boot Camp Assistant)
Reboot, as soon as you hear the startup chime press and hold the option key, when the startup manager appears select OSX.
Then read the instructions.
And tell me how you installed the Support Software, plus where you got it from?

Similar Messages

Boot Camp: Early 2011 MacBook Pro boots to black screen with blinking cursor after windows 7 installation.

I bought and downloaded the windows 7 ultimate edition 64 bit iso, then proceeded to perform a correct burn to a DVD one at the slowest speed and one at the fastest. all went well. so I open Boot Camp assistant and follow the instructions to the letter, downloaded the driver support to the flash drive. partitioned my drive with more than enough room 150 gb. its starts its install. I get through everything seamlessly where I put in my info all with the exception of my activation code. yet it still continues to finalize the install and does another restart. boots back up to either A. black screen saying press any key to boot to my install disk. B. if I take it out just a white curser. also I read it may be because I had the flash drive in while I was trying to boot so I removed it as well, same result. any input would be much appreciated.

Boot Camp- Windows installation boots to black screen with blinking cursor.

Macbook Pro boot shows black screen with white text cursor

Hello,
I have a MacBook Pro 7,1 MC374xx/A running Mavericks. My box has two internal hard drives in it. One had the Mac OS installed to it, and the other has absolutely nothing on it. I decided to give Boot Camp Assistant a try and chose the hard drive with nothing on it to install Windows on. I also had an external USB DVD drive attached with the Windows 7 installation disc on it.
So, next thing ya know, my Mac reboots and loads a black screen that says "Memory Overload." I take out the external USB drive and restart. Then it said, "No boot devices found." Now for whatever reason, it's just a black screen with a white text cursor.
What the heck happened?
I selected command R and confirmed that I installed Boot Camp on the right hard drive (the drive that did not contain my Mac OS). Then, I completely erased everything from the drive with Boot Camp on it. But still..black screen with white text cursor.
I have no Time Machine backups available so I'm forced to reinstall the OS. Any idea why this happened? It seems I must have attempted to install Boot Camp improperly. Any ideas or instructions on what to do now or how to install Boot Camp successfully on the Macbook Pro I own?
Earnestly,
Speck

Boot Camp- Windows installation boots to black screen with blinking cursor.

Boot Camp black screen unable to boot Win7

So I decided to do some tomfoolery with my 2011 27" iMac and installed a SSD alongside the HDD in the computer. The original HDD partition setup was:
HDD
1. Macintosh HD
2. Bootcamp
After installing the SSD I partitioned it into two, copied over the boot camp partition (using clonezilla), deleted all the partitions on the HDD and created a fusion drive with a separate bootcamp partition. Both drives partitioning should be as follows:
SSD
1. Fusion HD SSD portion
2. Bootcamp
HD
1. Fusion HD HDD portion
I think there's a recovery HD partition on the HD, but I don't see it when booting and holding down option.
My issue is windows will not boot any longer. I can see the bootcamp partition and files in Mac OS X Mavericks, I can select bootcamp from startup disk, but when booting all I get is a black screen with a blinking cursor. I've tried multiple things to fix this, but still with no luck. I've run the windows 7 boot disk repair tool, including bootrec and chkdsk.
I do have gdisk installed.
sudo gpt -r -vv show disk0
Password:
gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1464843752      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1465253392      262144      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1465515536         496
1465516032   488007680      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712        1423
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 - 1023 254 63 [         1 - 1465516031] <Unknown ID>
*2: 07 1023 254 63 - 1023 254 63 [1465516032 - 488007680] HPFS/QNX/AUX
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
I have backups of everything.
Am I attempting something currently impossible? It seems odd that I cannot get the installation of windows to become bootable again.
Any help is appreciated.

Yep, me too. Tech support told me to find a Mac display to connect to in order to get the Windows disk to boot. They said it's a "chicken and egg thing". The Windows side needs the driver for the non-Mac display in order to boot the disk, but the driver is on the OS X disk which is run AFTER the Windows software is installed. Personally, I think it's false advertising, this no-problem-use-your-existing-peripherals Mac Mini. The Tech guy tried to sell me a new Mac display. At $1000 after tax for the display, suddenly I wondering why I didn't just buy an iMac?

Windows not loading properly in boot camp, black screen

Hi guys,
having problems with bootcamp, running the latest version under snow leopard on an intel mac mini
i bought a copy of XP on ebay, to my dismay, what i actually got in the post was a recovery disk for a dell laptop, and a product key. Although probably illegal to sell to me, it was able to install over the top of my windows 2000 install i did with Parallels. installing to bootcamp as the disk drive is named with a different letter each time i start the virtual machine, causing havoc with games that require the cd to be in the drive, and not knowing where to look for the disc.
I partitioned the drive, and installed windows. once that had finished, it rebooted automatically. but now, whenever i boot up windows under botcamp, i am presented with a black screen with a flashing cursor. i cannot type anything, or bypass it. if the xp disk is in the drive, it says press any key to boot windows from the cd, but pressing any key does not result in anything happening, and so i have to hold the power button down to do an emergency restart.
does anyone know where i might have gone wrong?

solved, by using a windows service pack 2 cd, instead of service pack 3. not sure why the later service pack would not install properly

Boot Camp: Black Screen when installing Windows 7

Hey guys, I have an intel 27' iMac. 4 days ago I removed windows 7 because there was an issue with the system (it didn't let me run Maya), so I attempted to install windows 7 again, but the problem was that my internal disk drive doesn't work. (Tried multiple ways of fixing it) Then I bought an external disk drive, hoping that this would fix everything, I was able to partition my windows 7, but when the mac restarts for the first time I'm introduced by a black screen with a small blinking dash top-left of the screen. So I found a fix for it, I got a USB renamed it to MBRFAT or MRBFAT don't remember exactly (I'm on a different computer) and did everything the internet told me to do. To my surprise, it made the blinking dash disappear, but I was introduced with yet another error. Bootmgr is missing, these 4 days were filled with complete bad luck. Please help me out here.
Too long; didn't read version: When the iMac restarts for the first time, a black screen appears with a Bootmgr error, telling me to press any key, although I keep pressing it on my USB mac keyboard nothing happens.

Help

285 GTX Mac and Windows XP booting with Boot Camp - Black Screen

I decided to update my 8800GT to the newer 285 GTX. Loaded the drivers, a must first, then installed the card. Booted the Mac and wow what an inprovement.
Here's where the problems start. I used Boot Camp to boot to my Windows XP 32 install in Bay 2. Got the Windows Start Up screen then nothing but black.
I reinstalled my 8800 GT and restarted the computer. I installed the latest nVidia drivers (190.38) in XP.
I reinstalled the 285 GTX and tries again. Mac worked fine when I restarted in XP got the Windows startup screen then nothing but black.
I could use some answers to solve this problem. I believe the 285 is supposed to work booting Windows from Boot Camp but I can't figure out how to make it work.
Thanks in Advance

I know I saw, and tried to help, someone else with the same questions. At that time I think tried to get them to use Driver Sweeper 2.0 and really uninstall drivers and any leftovers.
So there should be another thread here, but maybe also on eVGA forum.
And it doesn't make sense, unless XP or even Apple's leftover Boot Camp drivers. So look for Driver Sweeper 2.0, works better; and there is a thread on evga for removing graphic driver and upgrade.

HT1492 windows 7 boot camp black screen after install

Hi,
I have installed bootcamp on a 2010 white macbook with os 10.7
Windows 7 was install all the updates for apple and windows where completed. Everything was looking good and running great. This is my work computer and it has run boot camp previously on another macbook with the same specs.
When I restarted the computer to comfirm that all was good with both partitions the mac is running great, but the windows just locks on the black screen, no cursor, no windows starting.
I tried to start with the install disk in but after the black and white instruction screen the computer went back to the black screen.
I deleted the windows partition and tried to re-install but just got the black screen straight away and it will not even load.
When i did this I noticed that Parallels had been install on the computer I tried to start it and the windows 7 is asking for the install disk to be inserted and restarted to fix problems. I insert the disk and tried to restart but nothing happened again.
Any help would be greatly appreciated. As i need to do school reports over the next week!
Thanks LC

Did you create a snapshot of Windows in Parallels to fall back onto if it won't work?
It sounds like to me you didn't pass validation, did you ignore those warning bubbles in the bottom corner?
Take the machine to a local PC/Mac geek and have them find the problem, it's too involved to go into here.

Boot Camp - Black Screen after installing Windows 7

Hello guys!
I have tried to install Windows 7 several times and so far no success.
Everything goes fine until I complete Win7 installation.
Then when I install Boot camp drivers the computer prompts for reboot.
After the login screen, I am able to log in, but the screen turns into BLACK!.
And I cannot do anything but shut it down with the power button. I can still hear that the laptop is on, but screen stays black.
I have tried removing the ATI and NVIDIA Drivers as recommended in this forum:
http://forums.macrumors.com/showthread.php?t=840528
But so far I get the same result over an over.
Anybody is facing the same issue?
I have MACBOOK PRO
MAC OS X 10.6.8
AMD Radeon HD 6490M (ATI)
Intel HD Graphics 3000
Quad Core i7 Chip, 4GB RAM 500GB HD
Please Help!!

I did install : Display Driver + Catalyst Control Center dowloaded from AMD support website:
http://support.amd.com/us/gpudownload/Pages/bootcamp-win7.aspx
The result is still the same - BLACK SCREEN
I rolled back to initial configuration.
Then I installed the AMD driver.
In device manager it shows as the AMD Radeon HD 6490M driver for the display/Graphics card
Everythig is fine until I install the Boot camp drivers.
Then after the reboot I face the same issue.
However the driver for AMD still stays there in the devive manager.
Any other ideas, suggestions?
thanks!!

Boot Camp Black Screen

Hi, I recently tried to use boot camp on a mac pro (MacPro2,1) and got the windows support files from a 3rd party website and put the contents of the dmg onto a thumb drive and plugged it in and inserted the windows 7 disc, ran boot camp assistant and unchecked "download latest windows support software from apple" and then selected my separate hardrive from the menu and clicked continue, then it shut down the mac and rebooted to what i was pretty sure that was the windows 7 disc but it was just a black screen and my monitor said it was going to sleep. Help!
See ya!
- Julian

you will have trouble with 64-bit Windows
why 3rd party site for drivers?
remove all the drives but the one that Windows will use

Windows 7 Boot Camp Black Screen?

Hi,
I know there are a lot of topics about this around the forums, but I'm having a great deal of trouble installing Windows 7 on my Macbook Pro, and none of the solutions I have found are working for me. What's happening is I can make a new Windows 7 partition and press install, but when the computer restarts, it boots to a black/grey screen with no visible activity. Sometimes I can get as far as "loading windows files" or something to that effect, but it always freezes on the screen with that loading bar full. I have been trying to solve this for quite some time but no solutions have proved effective.
My specs, in case it helps:
15-Inch, Late-2008, Macbook Pro
Nvidia GeForce 9400M 256 MB
10.7.2
MATSHITA DVD-R UJ-868
I am using a retail copy of Windows 7 home premium.
Any Advice would be greatly appreciated.

Did you create a snapshot of Windows in Parallels to fall back onto if it won't work?
It sounds like to me you didn't pass validation, did you ignore those warning bubbles in the bottom corner?
Take the machine to a local PC/Mac geek and have them find the problem, it's too involved to go into here.

While i was running boot camp to install windows 7 i had to cancel operation. Now my mac comes up black screen with a curser at top

while i was running boot camp to install windows 7 i had to cancel operation. Now my mac comes up black screen with a curser at top

First of all, start your Mac with the Alt key pressed until the boot manager apears. If your keyboard is wireless probably you should press the power button at the same time you start the Mac.
After, go to Bootcamp Assistant and remove the windows partition and do all the process again.
Remember to remove all the USB/Firewire/Thunderbolt devices that are attached to the Mac during the windows installation.
Once windows boots for first time, install windows support software with all the drivers.
IMPORTANT: If the windows partition doesn't boot correctly (Black screen with white blinking cursos at the left top corner) do this steps to boot windows:
1- Start the Windows Installation DVD at system start.
2- Click on Repair System, not install.
3- Select Command Prompt
4- Run these 3 commands: (Press enter for each command)
     Bootrec.exe /FixMbr
     Bootrec.exe /FixBoot
      Bootrec.exe /RebuildBcd
5- Exit command line (type exit)
6- Click on Restart button.
7- Boot the Mac and you will see that It automaticaly loads windows
Tell us how it goes!!
PS: Sorry for my bad english!!!

Just tried setting up bootcamp on MacPro. Computer now boots to white screen before going to black screen with curser in upper left corner. Can anyone get me back to Mac operating system so I can start over again?

Just tried setting up bootcamp on 2014 MacPro 13" laptop. Computer now boots to white screen before going to black screen with curser in upper left corner. Can anyone get me back to Mac operating system so I can start over again?

Hi there rjr25350,
You may find the information in the article below helpful.
Boot Camp: Windows installation boots to black screen with blinking cursor
http://support.apple.com/kb/TS4536
-Griff W.

Server 2008 crash - black screen with mouse cursor

dell poweredge 2950 with Perc 5/I RAID, ESXi 4.1 host, Windows Server 2008 R2 SP1 VM
After swapping out a failed raid5 drive this vm began displaying inpage operation error popups while checking folder permissions. event viewer errors:
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2.
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:.
chkdsk /r run from the win2k8r2sp1 install dvd command line resulted in more corrections than i was able to screenshot:
After this the server would only boot to black screen with mouse cursor. same black screen result in safe mode or directory services restore mode. sfc /scannow, startrep, and registry repair from the folder contents @ c:\windows\system32\config\regback
have been attempted with no improvement. I am still able to access the filesystem contents using the command line from the win2k8r2sp1 installation DVD - user + registry files copied over to another drive without problem and i was able to load
the registry hive on another system. This server was doing dns, domain controller and certification authority but the only important item is getting the CA back somehow. Any suggestions are welcome.

Hi,
According the information you have provided, the file system is broken.
After the repair, do chkdsk /r and sfc /scannow give any warning or error?
If yes, it means that the file system and system file are not repaired. Please post the error or warning here. It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support

Black Screen with Cursor (Tried most solutions)

To save your time and mine, I’ve tried all options in “press f8” and “recovery disk”. Over the past 3 days, I read almost all threads, videos, articles, and official MS help containing any mention of this problem. I also applied many commands, created few
“SystemRescue CDs” and “Kaspersky Rescue 10” on a usb drive. I follow instructions very well, and have never been stumped by a windows problem like this before. If someone solves this, you are a wizard!
Nothing has worked so far, but I really want to figure this out and not ‘reinstall’. It appears to be a simple and popular problem: “Right after Win 7 boot Logo, I get black screen with white mouse cursor,
no matter if I boot in safe mode, last good configuration, or normal startup”, but all the solutions that worked for most people are not working for me.
TL;DR: (answers to any of the 7 questions in the end will help me out)
Custom System: Win 7 64 bit (updated consistently), 4gb ram, Quad Core 2.66, 64GB SSD (Crucial M4) and 4 hard other drives. Only windows installations/updates have been installed onto the SSD, no other programs. Only 1 OS has ever been installed
on this computer. Never dual booted.
Mobo: Asus Maximus Formula. GPU: AMD HD7870LE
2014-04-19
I haven’t installed or downloaded any programs in the past 3 weeks, and did not notice anything unusual up until this incident.
In the morning the computer went into hibernation because I was away, it couldn’t wake up (usually happens), so I turned off the power supply. Turned it back on, and computer resumed, I was concerned as it may have run out of hard drive space on my 64GB
SSD (4GB free), but it booted fine.
Later during the day, I decided to restart the computer, and as it booted up again, it went into “start up repair”. I let it run and restart, and it arrived at the dreaded Black screen with mouse cursor, of death, right before logon screen.
Symptoms while on this black screen.
Ctrl alt del doesn’t work, power off doesn’t work, cursor can move, pressing ‘shift’ many times doesn’t bring up the ‘sticky key’. No task manager.
Hard drive is not loading anything, just idle.
Computer falls asleep after 15 minutes or so, and can wake up back to this black screen, so it remembers my power settings
Safe mode loads the drivers fine, but also gets stuck on the same ‘black screen with cursor’ forever
I tried every option in the ‘advanced boot’, including ‘safe with command prompt, safe with networking, last known configuration, etc’
Last known configuration, and all of the above, all boots to ‘black screen with cursor’, this means windows believed it booted fine the last time, so it remembered this configuration. That’s because all the drivers loaded without issue. While loading
Safe Mode, I can see windows loading all the drivers ok.
No restore or backups (I know, I do not deserve to live, lesson learned)
I tried all applicable functions from the ‘recovery cd command prompt’, bcdedit, bootrec, diskpart, and still couldn’t get it to boot.
Commands applied in Elevated Command Prompt from Installation DVD: (very careful with backups and overwriting)
Diskpart -> list volume, tells me that 100mb is system reserved, the other 59GB has no label, and is a different partition
Bootrec -> scanos, tells me that I have 0 windows installations, used fixboot, /fixmbr, /rebuildmbr, all successful. Mounting the drive later on RescueDisk’s TestDisk shows no problems with either partition.
BCDedit: shows both boot manager and winloader to be on the same drive, and I referenced it with a typical BCDedit enum output, and nothing is out of place.
I went into Regedit by typing “regedit” in command prompt in Win7 recovery cd, and confimed that ‘Shell=explorer.exe’ under:
HKEY_local machine/software/microsoft/WindowsNT/Currentversion/winlogon.
Sfc /scannow couldn’t run due to “Pending repairs/restart”
So I used: SFC.EXE /scannow /offbootdir=c:\ /offwindir=c:\windows
Which ran and repaired some errors the first time. I ran it more just to make sure, with restarts in between, it gave me
Win resource protection did not find any integrity violations.
So the system files appears to be fine and not corrupted.
Bootrec /scanos does not detect any windows installations. “0 Windows installations identified”, yet “Diskpart -> Detail Disk” and bcdedit both detects the windows directory.
From windows recovery disk:
Startup Repair diagnosis: (Show Details)
All tests completed successfully
Boot status indicates that the OS booted successfully
It seems that the system and the OS boots successfully, and windows believes it boots successfully (that’s why last know good configuration gives me the black screen also, and Win Startup Diagnosis all says it booted successfully”
It’s the second before it enters into the logon screen, the black screen and movable cursor appears, and hangs here forever. What programs load during this step, and how can I find out this info? Is there a diagnosis tool that allows me to see the programs
as they load during windows start up?
Other attempts:
Then I read it could be windows using “winresume.exe” instead of winloader.exe, since I have “hiberfil.sys” in C:\windows, so I backed it up and deleted it using SystemRescue.
Another thread said “winevt” bad logs, in C:\windows\system32\winevt were causing this black screen, so I backed it up and deleted that also, and it still won’t boot.
I plugged in the devices that were attached (just 1 ext hard drive, through a 10 port usb hub) that was connected while it went into hibernation on April 19th, and it didn’t help.
The files on that disk and the file system is not corrupt; I tested it by taking it out and docking it on a usb Blax Duet, and my laptop did a scan disc, and it’s fine. The Sfc Scan also shows that it is ok.
I also unplugged all the other sata drives, switched the SSD sata cable around to other sata ports to no prevail.
So far I know:
Very unlikely that it’s a virus problem, I haven’t installed or downloaded anything this month, scans from Kaspersky 10 rescue disk shows nothing, Farbar scan shows nothing. I also never install anything suspicious, like toolbars or junk. I scan regularily.
Not a driver problem, since I haven’t changed or updated anything. I unplugged all devices, and starting in 640x480 mode also gives the black screen with cursor. Drivers all loaded fine while starting windows and safe mode
Boot files are intact, windows system files are in the right place since windows actually boots into a shell? Both bootloader and boot manager show up in bcdedit enum scans
Not due to system file corruption, since file integrity are confirmed ok by above CMD commands, and windows diagnostic tool, and testdisk.
My questions:
What could be the cause of this? I didn’t make any changes to BIOS, windows settings, perform any updates, suspicious activities, installations, or crashes, before this. The files on that disk and the file system are not corrupt either, I tested it by
taking it out and docking it on a usb Blax Duet, and my laptop did a scan disc, and it’s fine.
Which program (classpnp.sys? explorer.exe? winlogon.exe?) is being loaded right before “windows logon screen” that would cause it to hang with a black background and cursor?
How can I find out this information? Is there a tool that can record all programs that are being loaded by windows at boot?
I only have access to regedit, elevated command prompt, and I can change files through SystemRescue or Kaspersky recue, how can I get the computer to boot past that black screen with a mouse cursor? The answer seems so close.
From the Rescue Disks, what could I really do to get past the black screen?
Those who are computer technicians could tell me: If I take it to a computer shop or technician, what could they do in a situation like this aside from all of the above? Do they have some ‘next level’ access tools or are they just going to waste my time
and tell me I have to reinstall?
At the very worst, I will obviously reintall. On my 64gb SSD, I didn’t install any important softwares. All my important software installations are on a separate drive. However, will they still work if I did a ‘Inplace Upgrade’ install of windows? Does
registry get wiped?

Hi,
Have you tried to take startup repair when booting with the rescue disk?
Startup Repair
And we'd better bring the PC to the vendors, then take an examination of the hardware health.
How does the Bootrec /scanos show 0 installation identified? We may take a try with chkdsk from command line to check if there are any disk errors:
Run Check Disk from a Command Line to Check for and fix Disk Errors
Please also take a check if the system reserved partition is stay in health:
Understand (and Get Rid of) the Mysterious Small Partition
Another shoot, please try to rebuild BCD:
Use Bootrec.exe in the Windows RE to troubleshoot startup issues
Regarding the repair install, detailed information please take a check with the article below:
How to do a repair install to fix Windows 7
Hope this may help
Best regards
Michael Shao
TechNet Community Support
Did you read his post at all as it does not look like it.
As to take it to a vendor "Custom System:"" Win 7 64 bit (updated consistently), 4gb ram, Quad Core 2.66, 64GB SSD (Crucial M4) and 4 hard other drives. Only windows installations/updates have been installed onto the SSD,
no other programs. Only 1 OS has ever been installed on this computer. Never dual booted."
As to your other suggestions he has tried them all as have thousands of us out here , all you have to do is search the internet and you see millions of hits about this.
And glad to see a moderator can mark a non answer as an answer.

Boot camp black screen with blip

Similar Messages

Maybe you are looking for