Boot camp can't view Mac partition

Hi guys. So heres my problem. I have a late 2012 27" Imac with a 3TB fusion drive, and I have boot camp successfully installed with Windows 8 (currently).
So my problem is when i'm booted into Windows, I cannot view my Mac partition at all. From what I understand, Apple have included HFS drivers which should enable me to at least view my Mac HDD when booted into windows, and the drivers are installed properly, however I still cannot even see my Mac HDD.
I have searched far and wide for possible solutions or even an explination as to why this isn't working for me, with no prevail. From what I understand, I think it might be the fusion drive which is preventing the reading capability. All I know is that i've tried almost everything (MacDrive etc.) and nothing works for me, I just ultimately want to be able to access my Mac HDD when im booted into Windows.
I have also tried on Windows 7 but I end up with the same problem.
CAN SOMEONE PLEASE HELP! THIS IS DRIVING ME CRAZY!
Thanks guys, any help will be appreciated!

I believe that you have already answered your own question without realizing it.
You indicated that yoru MacOS partition is on a Fusion Drive. If that is the case, then I do not believe that it is supported by Boot Camp, and you won't be able to access it. If you double check teh Boot Camp documentation, I believe it should clarify that. Fusion Drives are new technology from Apple (within the last year or so) and the technology is not really available to third parties yet, so other drivers like MacDrive, or HFS+ For Windows from Paragon won't have the ability to access the Fustion Drive until they either license the technology from Apple, ot attempt to reverse engineer it for themselves...

Similar Messages

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

JDFitch wrote:
Ok Great,
Will installing Boot Camp drivers allow me to both read and write to the OS X Volume from windows?
This is important as if it will it means i can make the windows partition a lot smaller and keep all my files on the OS X partition which would be preferable.
Jon
No, OSX will be read only (from Windows) and vice versa. (you can install 3rd party utilities on either or both partitions, to make read/write possible)

HT5446 If I buy a mac mini with a fusion drive and add windows using boot camp, can I make the SSD function be dedicated to the windows partition?

If I buy a mac mini with a fusion drive and add windows using boot camp, can I make the SSD function be dedicated to the windows partition?

Additional information from Linc's post. Basically, only one additional partition can be added to a Fusion Drive and it resides on the HDD.
Do computers that come with a Fusion Drive support Boot Camp?
Yes. Use the Boot Camp Assistant to create a Windows partition and install Boot Camp. The Windows partition will exist on the hard disk drive, not the Flash drive, and is not part of Fusion Drive Logical Volume Group. 3TB Fusion Drive configurations need to update to OS X Mountain Lion v10.8.3 or later to install Windows 8. See iMac (27-inch, Late 2012): Boot Camp alert with 3T hard drive for more information.

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

Can´t install windows 8.1 because boot camp can't partition the disk. I´ve follow many tips but they did´t work

I can´t install windows 8.1 because boot camp can't partition the disk. I´ve follow many tips but they did´t work (backup, reinstall os, erase space, etc.)
Macbook pro retina
os x yosemite 10.10.2
Thanks

There are several possibilities.
1. You do not have contiguous free disk space.
2. BCA has failed, or you may have a Fusion drive which is causing problems.
3. You have incorrect permissions on the disk.
4. Can you boot in OS X Safe Mode - OS X: What is Safe Boot, Safe Mode? - Apple Support?

If I want to install windows 8 in on my mac through boot camp, can I install windows 8 directly from my pendrive? whats the procedure?

If I want to install windows 8 in on my mac through boot camp, can I install windows 8 directly from my pendrive?
I do not have bootable CD.
whats the procedure?

Hi Rajthumar,
Welcome to the Apple Support Communities!
You can install Windows 7 or Windows 8 ISO using a USB flash drive. Please read over and reference the attached link for information on using Boot Camp to install Windows.
manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_10.8.p df
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Have a great day,
Joe

Installing Boot Camp - There is only one partition available for Windows

I have a brand new Mac Mini. Ran Boot Camp assistant and created Windows partition - 80 GB. Then when instructed, inserted Windows XP install disc. It went through some install steps then came to screen where you chose the partition to install Windows. There was only one partition showing - Partition 1. I think that's the Mac partition, so I quit install, removed partition with Boot Camp and tried again, this time setting Windows partition at 32GB. Insert Windows install disc, same result - only Partition 1. I called Apple support, we did it all again - same result. They had me completely reformat my Mac disc with the OSX discs, then run Boot Camp assistant and set partition to 32 GB. Same result - only Partition 1 is available. The Windows install disc I am using is the same disc I used to put Windows on my son's MacBook about 9 months ago.
I need this Mac Mini to run both OS. What to do?

Use NTFS for Windows and buy Paragon NTFS for OS X
You can also try Paragon HFS for Windows
As long as you are using for data and backups, you can leave the drive as GPT too.
I would recommend strongly to always have a 2nd bootable Mac OS drive, only need 30GB partition. System maintenance. Though LIon Recovery Mode finally makes it less but not totally unneeded.
And yes you can use Windows to create a partition.
Boot Camp is too broad. Do you want or mean BC Assistant? not needed but probably possible.
MBR has trouble with 3TB drives.

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

AMD Crossfire, Boot Camp, and the new Mac Pro Issue

Hello, all.
I have a new Mac Pro (Late 2013) with 6 cores, 32 GB RAM, and dual D700 AMD graphics cards. I'm using an older 30 inch Apple Cinema Display (with the dual link DVI adapter). I've successfully installed Windows 8.1 under Boot Camp. Here's my problem...
I understand that for the new Mac Pro under Boot Camp enables AMD CrossfireX by default from multiple sources online. However, it's disabled on mine, and every time I try to enable it (and hit "Apply" in the AMD Control Center), it disables again.
Is Crossfire only available for use with a Thunderbolt Display attached? Could that be the problem? Or is the AMD Control Panel lying to me?
Now, games in Windows are still running well... But I'd like to take full advantage of the dual graphics cards in the new Mac Pro with Crossfire. Any help is greatly appreciated, thanks!

Fixed it!
So, not only would Crossfire not enable under Windows 8.1 on my Mac Pro in Boot Camp... But Windows started crashing massively. I was about to wipe Boot Camp entirely and try a clean install (even though the only three things I'd installed were Windows itself using Apple's exact instructions, Steam, and Skyrim), but decided in a last ditch effort to try disconnecting and reconnecting peripherals.
Turns out the culprit was my Belkin Thunderbolt Express Dock.
Disconnecting the Belkin Thunderbolt dock not only stopped Windows from crashing, but now I can enable Crossfire, as well!
Now, this is especially strange since I have read elsewhere that people have no problems using the Belkin dock under Boot Camp with other Macs... This issue is probably isolated to using it in Boot Camp with the new Mac Pro. But disconnecting the dock from my Mac Pro has solved not just one but all of my Boot Camp issues. (Of course, using the Belkin dock under OSX on my Mac Pro is no problem.)
Long story short, if you have a new Mac Pro and plan on using Windows 8.1 under Boot Camp, don't have the Belkin Thunderbolt Express Dock attached.
I'm going to contact Belkin and tell them what I've discovered.
Hope that helps y'all.

Help! Boot Camp has messed up my partition table!

I used Boot Camp to create a 60GB partition on my hard drive for a Windows installation; however, Boot Camp crashed and hung part way through. I left it for an hour but ultimately had to kill it forcibly.
Now I'm left with 60GB missing from my hard drive, but no partition to delete to reclaim the lost space.
Running diskutil on /dev/disk0 reports the following:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *465.8 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS Macintosh HD 404.9 Gi disk0s2
I've tried booting from the installation disc and running a repair via Disk Utility. This appeared to find some errors but, after repairing them, my hard disk is still 60GB down.
Short of reinstalling OS X, is there anything else I can do to remove this partially-created partition and claim back my disc space?
Message was edited by: m0thr4

Fixed it by backing everything up in Time Machine, booting off the installation DVD, erasing my main HDD (which brought its capacity back to 465GB) and then performing a restore from the last full backup.

Boot Camp can no longer be found

Using OS 10.6.8 on an early MacPro; Boot Camp can no longer be found; checked my Leopard disk but unable to find BC on it it. What to do?

Roy Bradshaw wrote:
I have the same problem as Merlin. I am runnung Snow Leopard 10.6.8 on a MacPro 1.1 with Intel Processor and when I go to Boot Camp Assistant to download the Windows support it says it is not available. Does this mean I have to "up-grade" to Lion, or what is the answer.
Read the Bootcamp Installation instructions. http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
The Windows Support software for Snow Leopard is on your Snow Leopard Installation disk. There is no download of Windows support software for Snow Leopard.

Boot Camp Won't Let Me Partition

I have been trying to set up a Windows XP partition on my Macbook just to play some games, but Boot Camp won't let me partition my hard drive, saying that some files are unmovable and that I should reformat my entire hard drive. Any ideas how to get around this without losing all of my work?

None that I know of. If you have access to an external hard drive, go ahead with the backup. This way, you have a fallback no matter what happens.
In theory, when a backup is restored, files are laid down in a manner that minimizes fragmentation; so if successful in backing up, reinitializing and restoring the hard disk, you should be able to create the Boot Camp volume.
You could also experiment with creating a smaller Boot Camp volume. What the Assistant is looking for is an unbroken string of free space blocks--something between 5 GB and whatever your chosen partition size might be. Strange as it might sound, depending on your habits as a user, you might not have that unbroken string even when you have something like 100 GB free.
Hopefully, I've pointed you in a good direction here, though you may disagree with the solutions offered. They are simply the only known methods for dealing with this issue.
Nate

Hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game on the windows and i cant find a proper program to actually setup the game someone help me please

hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game called guild wars 2 and i cant find a proper program to actually setup the game

Only if you decide to share with us your particular situation. Guild Wars should install and run like any other Game. Other than the Game Installer, Games don't need some other installer to make them work. Only someone who reads the instructions for the proper installation.

Can't boot into Windows after splitting Mac partition with Disk Utility

Hi everyone,
I installed Windows 8 with BOOTCAMP, creating a large 871 GB partition with a smaller 127 GB partition for Windows. After installing Windows, I then went back to Disk Utility to shrink the Mac partition and add two new partitions, one for storage and another blank, hoping to use it to install Linux into one day.
I did that, and now Windows doesn't boot. A Windows blue screen tells me I need to use the Windows DVD to repair it.
I tried to use Disk Utility to delete the two new partitions I made and grow the Mac partition back to the max size of 871 GB. But it doesn't let me do this. The Disk Utility log doesn't report an error and thinks it worked but the partition stays the same size. However if I make the partition a little smaller, like 870 GB then it works. I'm wondering if the Recovery partition is hiding there and preventing me from fully expanding the Mac partition.
What can I do?
Here's what I get if I type in sudo gpt -r -vv show disk0:
Code:
gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168 gpt show: disk0: Suspicious MBR at sector 0 gpt show: disk0: Pri GPT at sector 1 gpt show: disk0: Sec GPT at sector 1953525167 start        size index contents 0           1         MBR 1           1         Pri GPT header 2          32         Pri GPT table 34           6 40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B 409640 1701278816      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC 1701688456     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC 1702957992     1846360 1704804352   248002560      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 1952806912      718223 1953525135          32         Sec GPT table 1953525167           1         Sec GPT header
Here's what I get if I type sudo fdisk /dev/rdisk0:
Code:
Disk: /dev/rdisk0     geometry: 121601/255/63 [1953525168 sectors] Signature: 0xAA55 Starting       Ending #: id cyl hd sec - cyl hd sec [     start -       size] ------------------------------------------------------------------------ 1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID> 2: AF 1023 254 63 - 1023 254 63 [    409640 - 1701278816] HFS+ 3: AB 1023 254 63 - 1023 254 63 [1701688456 -    1269536] Darwin Boot *4: 07 1023 254 63 - 1023 254 63 [1704804352 - 248002560] HPFS/QNX/AUX
Here's what I get with gdisk:
Code:
Disk /dev/rdisk0: 1953525168 sectors, 931.5 GiB Logical sector size: 512 bytes Disk identifier (GUID): 6075110F-7CEF-4604-85EE-6231B850E2AE Partition table holds up to 128 entries First usable sector is 34, last usable sector is 1953525134 Partitions will be aligned on 8-sector boundaries Total free space is 2564589 sectors (1.2 GiB) Number Start (sector)    End (sector) Size       Code Name 1              40          409639   200.0 MiB   EF00 EFI System Partition 2          409640      1701688455   811.2 GiB   AF00 1 TB APPLE HDD HTS54101 3      1701688456      1702957991   619.9 MiB   AB00 Recovery HD 4      1704804352      1952806911   118.3 GiB   0700 BOOTCAMP

Okay, the code I typed didn't display properly in the forum. Let me try again.
Here's what I get when I type
sudo gpt -r -vv show disk0:
gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1701278816      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1701688456     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1702957992     1846360
1704804352   248002560      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1952806912      718223
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
And when I type fdisk /dev/rdisk0 I get:
Disk: /dev/rdisk0          geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 1701278816] HFS+
3: AB 1023 254 63 - 1023 254 63 [1701688456 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1704804352 - 248002560] HPFS/QNX/AUX
Kappy,
I can boot into OS X just fine so if possible, I'd like to avoid reformatting everything. If you know of a way I can add more than 2 partitions with OS X and Boot Camp, please let me know. As far as I know, rEFInd can recognize more than two partitions, but I don't think it can edit partitions on a GPT / hybrid MBR system. Or am I wrong?

I can't install Boot Camp Windows drivers from Mac OS X v10.6 install DVD

1- I already installed Windows 7 Ultimate 32 bit using Boot Camp Assistant 3.04 on my new Mac Book Pro 13" purchased this week, on a 60 G partition.
2- While in Windows 7 and after inserting my Mac OS X installation DVD, the screen displayed the Auto Play "DVD RW Drive (D:) Windows Support "
box where I selected: "Run setup.exe Published by Apple Inc." and double click on it
3- Then the Screen showed the "Install Assistant" with two options on it instead of the supposed "Welcome to Boot Camp Installer" . The option were:
Remote Install OSX and DVD or CD Sharing.
4- At that point I didn't know how to continue, so I quit the process and now I NEED YOUR ADVICE ON HOW TO.

i tried to download the windows suport SOftware "boot Camp" and it freezes!
No i can install the boot camp, but does not acept the windos 7
It runs all to the end the installation of windows, Then it begins, creating a new user, and when it will start , it CRACHES!
Jesus with the Lion it wasn't so Hard to install it!!

Boot camp can't view Mac partition

Similar Messages

Maybe you are looking for