Boot camp cant find windows installer

I'm trying to run boot camp to install Windows 7 on a partition and it can't find the Windows installer. I'm tried it from a USB and the Windows DVD, but neither works.
It's an 2008 iMac 2.66 Ghz 4 Gig Ram, 128 SSD running 10.7.2
Thanks!

Ennoxx,
I'm not exactly sure what you mean by Boot Camp "can't" find window installer. I used BC to partition my drive and create my driver DVD. I inserted the W7 DVD and clicked install. My Mac restarted, but it did not install W7. I could see there was a BC partition on my hard drive so I tried to restart and at the "chime" hold the option key. Only my Mac and Restore drives were visible. When the computer finished restarting I inserted the W7 DVD. I restarted again and held option at the chime. This time the W7 disk was visible. I selected it and everything went great.
I expected the "Windows Installer" to come up and ask to insert disk or since the disk was already in the drive to just restart in the BC partition and install it. But, it needed a little user intervention. This was true also for the several restarts during the install process. Everytime I had to hold the option key and select the Windows partition. I suppose I could have set Windows as the default but I'm not sure.
I hope you figure it out.
Good Luck.

Similar Messages

Problems installing Windows 7 with boot camp, cant find the cd/dvd driver...

I´m having some problems installing Windows 7 on my new 12,1 (21,5) iMac with boot camp. When the computer restarts and the Windows 7 setup begins, i get the message that the cd/dvd driver cant be found, so i can't continue the installation. I've tried searching online for the driver, but can't find it. The cd/dvd seems to be a OPTIARC cd/dvd ad-5690h, which seems to be produced by Sony. I have a authentic windows 7. I even tried loading everything ver to a usb-drive, but then it wont boot.

After reading around on this, and other forums I tried to burn a new dvd at reduced speed(2x), but that did'nt work either... I have an authentic windows 7 iso, downloaded with serial, is there any way to boot this from a jump drive or external hdd?

Why can't the Boot Camp Utility find my Installer Disk?

I'm trying to use Windows 7 Proffesional on my MacBook Pro (running on Mountain Lion) with Boot Camp, but whenever I am partitioning on the Boot Camp Utility it tells me that the Windows Installer Disk cannot be found. I have been able to get Windows 7 free from my college and it was all digital so I did as suggested and burned the .iso file that was downloaded to a DVD-R. When prompted I put the burned disk into my disk drive. I can find the disk in Finder and it shows that the .iso was burned successfully but the Boot Camp Utility will not detect it. I'm not sure what I have left to do, but I would like to get this problem resolved. Any suggestions?

I tried burning the ISO to a disk on the slowest (2.4 is the slowest offered on my computer) twice. Both times the burns didn't give me any error messages and the ISO was found on the disk, but Boot Camp Utility still will not detect the disk.
Any other suggestions?

Boot camp cannot detect windows installer disk.

Hi. I wanted to install windows xp on my macbook using bootcamp. After i made a partition with boot camp assistant 3.0, i insert my windows xp disk with service pack 2 in it, and click start installation. However, boot camp could not detect the installer disk, even though it did appear in finder.
Please help.
Thanks.

Well, when i restarted my mac, and hold down the option key, there is only 1 choice for me to choose, which is Macintosh HD. There is no other option. However, the installer disk did appear in my finder. So I am not sure whats happening...

Boot camp asking for windows installer update

I cannot load the osx dvd because it prompts me to update my windows installer. You can click no or update. No closes the whole thing and update gives me an error. Anyone able to help?

Hi afrobat,
you probably need something like this (download from net).
For winXP 32bit ="WindowsXP-KB942288-v3-x86.exe"
for win7 32+64bit ="Windows6.0-KB942288-v2-x86.msu"
"Windows6.0-KB942288-v2-x64.msu"
These are windows applications so install with-in winOS.
They are "Windows Installer 4.5"

HT5639 i use boot camp to install windows 8.1 but in the middle of the installation it is stop,how can i install the windows again?

i use boot camp to install windows 8.1on my mac but in the middle of the installation it is stop,how can i install the windows again?
why it`s stop?

What is your exact machine and what's the error

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2011 MBP upgraded to Mavericks.

hello,
And thank you in advance.
I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 20011 MBP upgraded to OS X 10.9 Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive. I tried to create an iso image from my Windows XP machine but recieved messages that Windows 8.1 could not run on XP. I've ordered the Windows 8.1 backup media.
Any way to proceed?
Thanks Tim

download the win 8 iso from here;
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
then start over. install on to your usb along with the support software.

Installer disk not found message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks?

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive.
Thanks Tim

You might have better luck in the Boot Camp community. I'll ask the hosts to relocate your post.
Boot Camp Community

HT3777 How to install Boot Camp on 32bit Windows 8 on a 2011 MacBook Pro?

I used Boot Camp to install Windows 8 Consumer Preview as the 2nd OS on my 2011 MacBook Pro. However after the installation I cannot install the additional Boot Camp just the drivers for webcam/wifi/ethernet/cardreader/display/chipset etc.
But I would like to be able to use the function keys to adjust the brightness and volume like on a normal laptop without having to go through settings.
Anyone know how?

You need to install the Boot Camp Windows Support Software, but I have no idea which version of OSX you have so, if 10.6.x the software is on the OSX install disk, likewise for 10.5.x, if you are running 10.7.x (lion) it is a download from the Boot Camp Assistant.

I'm using a 2014 iMac and a Win 8.1 64bit install disc with bootcamp. I created the ISO according to the instructions but when I selected it in bootcamp I got the following error "Boot Camp only supports Windows 7 or later..."

Bootcamp rejects the ISO file made from a windows 8.1 disc with the error message "Boot Camp only supports Windows 7 or later installation on this platform. Please use an ISO file for Windows 7 or later installation."
How do I get past this?

Hi Loner T
No the ISO is just 64bit. I bought a shrink wrapped copy of 8.1 full version. It has two discs, one for 32bit and one for 64bit. I used the 64bit disc.
I inserted it in an older iMac that has a dvd drive, and shared that across to my new iMac. I used disc utility to create a disc image following instructions I found here...
Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
This created an ISO file. I then went into bootcamp but when I tried to use the ISO file to create a boot USB it failed with the error above.
Regards
Ian

Boot Camp drivers for windows (download)

I am trying to instal windows 7 on my MacBook Pro thru Boot Camp. Does anyone know where I can download the Boot Camp drivers for windows. I can't find them on the apple website and I don't have my Mac OS X instal DVD with me.
Thank you

Nick Px360 wrote:
Are they essential or can I run windows 7 on my Macbook Pro without the bootcamp drives
Only if you don't mind a Windows system lacking most features and thus beaing nearly unuseable.
Applying the appropriate drivers for hardware support is a must for all operating systems.
Stefan

Unable to install Boot Camp Drivers for Windows

Mac Pro (2) 3.2 Xeon quads
Mac OS 10.5.2
Boot Camp side - Windows XP pro x64 w/SP2
Step 3 listed in the instructions for setting up Boot Camp is to Install the Boot Camp drivers for Windows. At this point Windows recognizes my Mac Install disk 1. I get the following message: "the installer encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again." I am not sure if I needed to do something to install the Service Pack 2? My firmware is at MP31.006C.B02 and 1.25f4. When I checked for the latest firmware, it returned a message that it was not necessary.
Maybe the XP pro x64 is not compatible?
Barry in St. Louis

I did install windows xp sp2 32 bit on my macbook pro 2.2 GB and I'm getting the same ...
When trying to install boot camp drivers, a message came up saying:
Boot Camp requires that your computer is running Windows XP Service Pack 2 or Windows Vista.
The only option it gave me was to click the "OK" button. When I clicked OK , another message came up saying:
Boot Camp Installer completed. The install encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again. Click "finish" to exit installer. I am running a brand new full retail version of windows xp service pack 2. Applecare will not help blaming Microsoft and of course Microsoft is blaming Apple. What a bunch of useless crap!! Can anyone help??

Boot Camp problems with Windows 7, and a new Macbook Pro

When I try to install Windows 7, when the process is almost complete and Windows is finalizing all settings, the system reboots then gets stuck at the white/gray bootscreen, and then tries to boot from disk, only to repeat the bootscreen cycle indefinitely. How do I fix this? Thank you very much.

My MAC BOOK is 13 inch, first generation of unibody that I bought when it first came out last November, 2009. It seems that the latest boot camp 3.1 does not support windows7 64 bits on my mac book model. I followed Apple instruction to upgrade boot camp 3.0 when running XP 32 bits. And I then upgrade my XP 32 bits to 64 bit Windows 7. The upgrade/installation was successful but I encountered a lot of problems with the mouse and sound.
1. No sound with my new Windows 7 64 bits.
2. I managed to make Windows 7 64 bit recognize my apple mighty mouse. But the mouse does not funtion normal as expected. It does not work with swiping and scrolling.
3. I could not re-install boot camp 3.0 from windows.old nor from the Mac OS X installation disk. When I tried to run setup.exe from the MAC OS X snow leopard, I got the error "Boot camp x64 is unsupported for this model"
I am really disappointed that boot camp 3.1 is not universally supported for all mac book or mac book pro.
I need help to re-install boot camp for my Windows 7? I bought the upgrade through education upgrade program and I selected to get 64 bit version so I do not want to rollback the installation to 32 bit.
Please help.

Cannot get Boot Camp drivers (for Windows XP) installed

I've partitioned my Time Machine HD for the 32GB/FAT format of Windows XP/Home Edition w/SP2. The installation of Windows proceeded OK. However, after installing Windows, ejecting the W-Install disc, and inserting my MAC OS X Leopard disc, the "setup.exe" file does not open. If I start up in Windows, I cannot open the Opt. Disc drawer since the BC drivers are not installed; if I insert the OS X disc in the drawer, then restart in Windows, the "setup.exe." file does not open.
Where do I go from here to install the Boot Camp drivers for Windows? These drivers are needed for 'normal' Windows operation, and are required in order to install the Boot Camp update. Any suggestions would be appreciated.

Hi David,
while you are in Windows and have the Leopard DVD inserted, can you access the content of it using the Windows Explorer ?
or maybe this hint on MacOSXHints can help you access the Windows Content of your Leopard DVD while in OSX http://www.macosxhints.com/article.php?story=20080708145453136
If so, you can try to copy the Windows Content onto a USB Memory Stick and use it to install the drivers.
Good Luck
Stefan

While i was running boot camp to install windows 7 i had to cancel operation. Now my mac comes up black screen with a curser at top

while i was running boot camp to install windows 7 i had to cancel operation. Now my mac comes up black screen with a curser at top

First of all, start your Mac with the Alt key pressed until the boot manager apears. If your keyboard is wireless probably you should press the power button at the same time you start the Mac.
After, go to Bootcamp Assistant and remove the windows partition and do all the process again.
Remember to remove all the USB/Firewire/Thunderbolt devices that are attached to the Mac during the windows installation.
Once windows boots for first time, install windows support software with all the drivers.
IMPORTANT: If the windows partition doesn't boot correctly (Black screen with white blinking cursos at the left top corner) do this steps to boot windows:
1- Start the Windows Installation DVD at system start.
2- Click on Repair System, not install.
3- Select Command Prompt
4- Run these 3 commands: (Press enter for each command)
     Bootrec.exe /FixMbr
     Bootrec.exe /FixBoot
      Bootrec.exe /RebuildBcd
5- Exit command line (type exit)
6- Click on Restart button.
7- Boot the Mac and you will see that It automaticaly loads windows
Tell us how it goes!!
PS: Sorry for my bad english!!!

Boot camp cant find windows installer

Similar Messages

Maybe you are looking for