Boot Camp Drivers wont Install on Windows 7

Hi
I recently instllaled Windows 7 on my MacBook running Lion and when i go to install the drivers on Windows 7 it says "BootCamp x64 is incompatable with this model"
How do i get the drivers to install?
Cheers

You download drivers from Boot Camp Assistant. Look there.
In the past the drivers were all on your DVD from OS X and would copy them to Desktop in Windows.
Back then, the folder was inside something like Apple \ Drivers \ .... \ Bootcamp64.msi
You can still search Explorer for "Bootcamp64" as well as search these forums.
Others have done same.

Similar Messages

HT4407 No boot camp drivers for 64-bit Windows 7 installed

Dear Family,
I'm unable to download the Window Support on the boot camp assistant.
I installed the 64-bit version of Windows 7 on my 15" Mac of 2010 model running on Lion n the Windows have no wifi so i guess the drivers are needed.
Returning back to Boot camp assistant to download the latest support from Windows but
It keep prompting:
"Can't install Windows Support Software because you are not connected to the Internet."
When my wifi is on and even if i'm on ethernet.
Is there anywhere i can directly download the bootcam, i suppose its 4.0 or 4.1
cant find any link.
Need you folks to help me out.
Without the Windows, i cant have my access and my assignment requires Access. N even the Business edition of MS Office Mac 2011 aint hv got Access.
Thanks so much!
Kryz

Obviously you are and can connect to the net.
The error message and problem is quite well 'documented' by other threads and the fault lies with Boot Camp Assistant's configuration.
Try turning off auto proxy in OS X network control panel and play around wtih that.

Can the Boot Camp Drivers be installed independently of each other?

I am having major issues with Boot Camp 3.1. It seems to put the windows 7 side of my mac to sleep immediately upon boot up. I have isolated the problem to Boot Camp and I was wondering if I could remove individual drivers to isolate which driver is causing the problem.
thanks,
C

Hi,
the Driver Setup program cannot do this so you would have to do this yourself "by hand".
For that copy the full content (files and folders) of the BootCamp Driver package from your OSX Install DVD to a folder on your Windows partition.
I prefer something like "c:\download" for this.
After that go through the appropriate Folders for the hardware components in your Mac and install each driver by hand.
Have you already tried the Safe-Boot options of WIndows 7 as described here http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-s afe-mode especially the Safe Mode and the Enable Boot Logging to determine if it is indeed a Driver problem or maybe some kind of startup item ?
Regards
Stefan

Boot camp drivers wont setup

so i have been on my mac onto the boot camp assistant and downloaded onto my usb the drivers for windows 7 setup. and when i go onto my windows 7 and try and open it it says: "The version of this file is not compatible with the version of windows you're running. check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher". our windows 7 is upto date and the usb i am using is formatted to: FAT.. so i don't know what to do?

You download drivers from Boot Camp Assistant. Look there.
In the past the drivers were all on your DVD from OS X and would copy them to Desktop in Windows.
Back then, the folder was inside something like Apple \ Drivers \ .... \ Bootcamp64.msi
You can still search Explorer for "Bootcamp64" as well as search these forums.
Others have done same.

Can install Windows 7 Pro, but not Boot Camp drivers

I have used Boot Camp assistant to install Windows 7 Pro (64 bit), and built the USB drive with Boot Camp drivers.
Installed on a separate drive on my Mac Pro.
When I install the drivers and reboot, I get an error. Basically Windows says there is an error and it needs to run System Restore in order to roll back to the previous status (ie. remove Boot Camp drivers).
I am using the latest Boot Camp drivers for a Mac Pro (4,1) and 64 bit Windows.
I tried downloading the drivers from Apple's website in Windows, unzipped and installed - same issue.
Windows is not yet registered.... (might that be an issue?)
Grateful for some ideas. I have previously had Win7 running on this machine, and even Win 8 (which crashed - necessitating a roll back to Win 7 whcih is nicer).
TIA

the drivers have a root setup.exe if people have problems with that they can manually navigate to the sub dirs and run the driver installs for the various hardware manually
the various driver exe install will only install if they detect the hardware is there so it's safe to run installers for say a video card ones computer does not have
and if one of the driver don't work of the hardware related to it is defect in some way you can identify which one as the restore would happen right over that driver install
that windows is not registered should not play apart as far as I know

Boot Camp users using XP via Boot Camp - Can you install Open Type Fonts?

Have any of the Boot Camp 2.1 users that have been using Windows XP via Boot Camp been able to install Open Type Fonts, i.e. fonts that are sold by Adobe?
I have now tried this on two new MacBook Pros, and I have tried three different retail versions of Windows XP on each system. It just does not work.
I keep getting the "Unable to Install Font" message, which suggests that I contact the font vendor, which I have. I have also tried many different versions of different fonts.
After having investigated with Adobe and Microsoft, and after having reinstalled Windows over 6 times on two different new MacBook Pros, I am starting to believe that this issue affects all new MacBook Pros and/or Boot Camp 2.1 users.
For some points, could someone please try to install an Open Type Font in Windows XP, and let me know if you are successful?
Thank you very much!

Experiencing the same from a fresh install of Windows XP on Boot Camp 2.1.
Tried 2 different scenarios. Installed Windows XP, Boot Camp Drivers, Open Type Fonts. Received an not a valid font file when trying to install. Installed Windows XP and then the Open Type Fonts. All fonts registered and accessed by the operating system without the Boot Camp Drivers. Installed the Boot Camp Drivers and checked the fonts, received error messages accessing fonts.
Pretty sure its the Boot Camp Drivers that are causing the problems with Windows and the fonts. Hopefully there is an updat to address this issue.

Windows 7 wont boot after install of boot camp drivers

I have been trying to get boot camp on imac mid 2010 with Maverick. TodayI used
Boot Camp Support Software 5.1.5621
The first set of drivers
Boot Camp Support Software 5.0.5033
kept crashing on windows. Today I noticed a new set of drivers, well its the same issue. If I leave off the boot camp drivers windows is fine, except no sound and other driver missing issues but it works. The problem seems to be Mav or the drivers, before updating to Mav everything was fine. Sometimes I can even get to the windows log on screen, at one point I was able to log on and do things. So being smart, I restarted and the problem came back. Who says Macs dont have issues.
Any thoughts

Just ran into this same issue.
My problem got resolved after using the x64 version DVD of Win7 (just x64 instead of the DVD that had both x86 and x64 versions).
What I did:
My host is Windows 8.1
After installing Windows 7 x64 as VM on my 8.1 based laptop two days ago, I wanted to do the same on my desktop PC, but I had the same issue described here.
I used a DVD just with the x64 version for my laptop and a DVD with both x86 and x64 version for my desktop.
Tried repairing as advised by a post, but got the error: "This version of System Recovery Options is not compatible
with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of windows."
I exported and imported the VM from my laptop to my desktop to test it and it ran with no problems.
So I tried the DVD that had just the x64 version of Win7 and that installed without issues.
I'm curious if this happens only when a DVD with more than one Win7 versions is used.

Windows 7 apple drivers wont install on Boot Camp

When i go to install the drivers off the disc i get this error. "An error occured installing the package. Windows Installer returned '1620'." Has anyone had this problem? please help
Im on Lion and installing to windows 7 professional

Pull all but the drive Windows will go on.
To use dual processor you'd want Windows 7 Pro x64 (System Builder $129)
In fact, you don't even need Boot Camp Assistant when installing on a dedicated drive, just boot Windows DVD and format the drive and partiton as you like.

Can someone help me install Boot Camp drivers to Windows 8?

Hey guys, I just installed windows 8 32 bit developer preview on my mac via boot camp. im not very familiar with exactly how boot camp drivers work, so i need a little help. First i will tell you what i have done.
1. installed win 8.
2. tried to run the boot camp 3.3.exe in windows 8. I used the troubleshoot compatibility option but an error camp up saying boot camp was already installed.
3. then i rebooted holding the option key so to boot up in osx. i then extracted the bootcamp 3.3 files to a flash drive.
4. after booting back to windows, i tried doing the compatitbility settings again with each individual file within the bootcamp 3.3 files. an error popped up saying something like "check to see if your hardware needs 32 bit or 64 bit version of this software." (i dont remember the exact wording)
i did some googling but i figured that i could get professional help from you guys.
I am going to classes all day so please be patient, because i wont be able to check this until later this afternoon.
help is very much appreciated. thanks in advance.
kpasa.

you need boot camp 3.0.x first before later versions can be installed;
Or,
I don't know what currently Boot Camp Assistant in 10.6.8 will also do a download of drivers.
But other than change Properites and try setting "use Windows 7 mode" and such, I think you are left high and dry with whatever is in 8.
And I use 8 on two of three systems. I left my Mac Pro @ Windows 7 for now but I much prefer Windows 8, yes.
I would not have chosen or gone with any 32-bit version. As long as you have 3GB RAM or more, forget it. Use 64-bit.
I have not seen or rather read any "success" stories with 8 and Apple drivers though.

Installed Boot Camp drivers for Windows 7, now black screen!

I have a question--I have a late 2009 iMac with the ATI card, followed Apple's procedure for avoiding the black screen while installing Windows 7 on the partitioned HD, and found I could not update to Boot Camp 3.1 without already having Boot Camp 3.0 from the 10.6 install disc. I inserted the disc, had to perform a workaround because it said I couldn't run 64-bit, and installed the drivers (I assume?) from Boot Camp on the 10.6 disc. When my iMac restarted the screen soon goes black. I guessed I was at the login screen, typed in my name and password, and could hear it logging into Windows--my sound works, Magic Mouse works (no scrolling), etc but no screen after booting up in Windows. Did the Boot Camp drivers from the install disc over-write something that was working? How do I fix this so I can proceed to install the 3.1 and 3.2 Boot Camp updates? Just the ATI* trick? Please help!!!

I'm sorry to take up your time guys - as I wrote earlier I'm not that technical and new to all of this - I was promised that I could do everything the mac way in the windows environment if I bought Parallels Desktop 7 - I only did this as my company is installing af new CRM system that is only supported in Windows - now I have installed everything and find out that the MAC keyboard shortcuts and layout is not working at all in i.e. Outlook etc. and I've totally forgotten how the Windows shortcuts etc. is working - Parallels asked me to go to Apple for help and here I am
You write that "if you believe it's correct do it" - but I don't believe anything else than what I'm told - I'm not going to install anything if I don't know how to do and whether it's correct - I wont have the nerve to do that.
If at least could get a list or someting on how to use my Magic Trackpad in the windows environment I would be happy - then I would just have to switch between how to use it on both sides.
Hope you understand and sorry again for taking up your valuable time

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

Windows 8 crashes and with the error "kernel_security_check_failure" after installing Boot Camp drivers.

Hi!
I've got a new 27" iMac (late 2013), and I was going to install Windows 8.1 (64-bit) to be able to play a few games.
Everything went smoothly (installed normally via Boot Camp Assistant), and after the Windows setup, the Boot Camp drivers needed to be installed. After this, the computer rebooted, but crashed at a blue screen with the error called "kernel_security_check_failure".
It rebooted a few times on its own, but after a few times, I got some options, and I chose to "refresh" the Windows 8 install, meaning it would reset the install while keeping my files (even though I didn't have any, as I never got to use it). This took some time, but it worked, and it booted into W8.
The Boot Camp drivers had been removed though, so I had to reinstall them. After they had reinstalled, the computer rebooted and the same blue screen with the same error hit me.
Something tells me that some of the BC drivers are messing things up. I can't find any information on this elsewhere.
Would it be possible to install only selected drivers, to eventually find out which driver is causing the problem?
All help is greatly appreciated!

I finally gave up, reloaded everything, this time, using WIn 8.1 Pro, not Enterprise. After I did the updates, patches, Norton 360, shut computer down and connected the external drives, and booted up...and got the BSOD. This time, I went to Microsoft and downloaded the Windows Debugger, and think I may have found the problem...NORTON!
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Am conrtacting them, but, here's the Debugger output:
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Dump\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
System Uptime: 0 days 0:03:09.864
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Followup: MachineOwner
6: kd> !analyze -v
*                        Bugcheck Analysis                                    *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
r8=0000000000005aa0 r9=00000000000007ff r10=ffffd00066cc8000
r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe cy
nt! ?? ::FNODOBFM::`string'+0x682b:
fffff802`0f9e8cdb cd29            int     29h
Resetting default scope
EXCEPTION_RECORD: ffffd0002852d338 -- (.exr 0xffffd0002852d338)
ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
   ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: 0000000000000003
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff8020f9ddae9 to fffff8020f9d1fa0
STACK_TEXT:
ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMDS64+71be6
fffff800`1d7a0be6 33d2            xor     edx,edx
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: SYMDS64+71be6
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMDS64
IMAGE_NAME: SYMDS64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 51f84c44
FAILURE_BUCKET_ID: 0x139_3_SYMDS64+71be6
BUCKET_ID: 0x139_3_SYMDS64+71be6
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_symds64+71be6
FAILURE_ID_HASH: {bf9be68b-5f04-08d4-3152-3d420dc362f6}
Followup: MachineOwner

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

2010 Mac Pro Boot Camp - Refuses to boot Windows after installing Boot Camp drivers

Hey all,
I have a quad 3.2Ghz 2010 Mac Pro with a Radeon 5870 and 8 GB RAM.
I have 2 10000RPM WD Raptor drives, the first drive is my Lion boot drive. The 4th bay contains the second Raptor which has Windows 7 Ultimate 64 bit installed. Bay 2 has Time Machine, bay 3 has a Windows backup drive.
I had first installed Windows and the Boot Camp drivers a few months ago and everything was humming along smoothly. Monday I tried to boot into Windows and it crashed immediately after the black Booting Windows screen started to change to the login window. This happened repeatedly. Nothing changed on the system that I am aware of. Whenever I tried to boot windows again, it booted into the repair mode. That did not seem to work because after running the repair it would still not boot.
So I did what is usually required of Windows, and that was to reinstall. I reformatted the hard drive, ran Boot Camp assistant, and started the install.
Everything was peachy so far, so I tried to reinstall the Boot Camp drivers (4.0). Did a reboot. Same problem. Doh!
So I did ANOTHER reinstall, and everything was fine. But this time I tried to install the Boot Camp drivers off the os install disc that came with my Mac (3.1). Still no go!
So finally I did my third reinstall and after that I did not install Boot Camp drivers. However, I did load up the CD and individually installed drivers for the Apple Mouse, Apple Keyboard, Cinema Display, etc. No problems whatsoever. Everything is actually still humming along fine.
So it looks like running the full Boot Camp install for some reason no longer works. Which means I am missing the Apple Boot Camp control panel, but that's not really a big deal. Althought it's quite annoying to not have the functionality of the special Mac keyboard keys like volume control, etc.
Has anyone run into this? I thought it might be a hardware problem but my Mac OS X OS exhibits no problems whatsoever.
Thanks!

Thank you to The hatter.
I have a Mac Pro mid 2010 with a SSD and several internal hard disks. For some time I was trying to install Windows 7 on a fresh boot camp volume on a new WD 7200rpm 1TB hard disk. It was taking hours to install, and then I had a series of failures to reboot that proved permanent. The Window Repair utility would come up and took forever to repair the volume - but failed to actually do so, requiring completion reinstallation of the bootcamp volume. This occurred three times, between 1 day and 2 months after installation. I had already moved the Windows drive in to drive slot 1 of the Mac Pro.
Eventually I gave up and installed boot camp on a secondary partition of the SSD. This worked fine, however is limited in capacity. So yesterday I thought I would try to install Windows on the hard disk again. The Windows installer took many hours to do its thing, and eventually a message came up that the installation had failed.
I took your tip about possible hard disk failure, and ran Techtool Pro surface scan. It turns out that there are lots of bad blocks being reported. According to Micromat's documentation, the bad blocks being reported are those that may be in critical areas of the disk that cannot be mapped out. They recommend low level reinitialisation (with zeros) to map out the bad blocks, if possible. I am now running Apple's Disk Utility to do this, and fingers crossed that this reinitialisation succeeds, or I will have to replace the drive.

Windows 7 Freezes at Restart After Installing Boot Camp Drivers

Hi,
I have a MacBook Pro and am having troubles installing 32-Bit Windows 7. All seems to be functional until I install the Boot Camp drivers included on the Install Disk. I have tried using the Boot Camp 3.1 update, but the same problem occurs. After the computer freezes on the install page, I can no longer access Windows (even in Safe Mode) and am forced to restart the entire process (that is, repartition the hard drive and reinstall Windows).
If I don't install the Boot Camp drivers, Windows seems to be functional, so I'm pretty sure it's something in the Boot Camp package causing the trouble.
Is anyone else having this problem? Any ideas or workarounds?

I finally got it to work. You need to go to the NVidia website and install their drivers. I think the Apple supplied ones are out of date and are causing Windows to hang. Install Boot Camp from the supplied DVD, install the update that Apple supplies through the newly installed Boot Camp, and then go to the NVidia website to manually download the drivers. I used the GeForce 300M series installer. Make sure you do all of this before letting Windows restart.
I had a few issues with it hanging a few times, but once I was able to get into Windows it seems to be working. All of the other Apple supplied drivers seem to work.

Boot Camp Drivers wont Install on Windows 7

Similar Messages

Maybe you are looking for