Boot Camp: Early 2011 MacBook Pro boots to black screen with blinking cursor after windows 7 installation.
I bought and downloaded the windows 7 ultimate edition 64 bit iso, then proceeded to perform a correct burn to a DVD one at the slowest speed and one at the fastest. all went well. so I open Boot Camp assistant and follow the instructions to the letter, downloaded the driver support to the flash drive. partitioned my drive with more than enough room 150 gb. its starts its install. I get through everything seamlessly where I put in my info all with the exception of my activation code. yet it still continues to finalize the install and does another restart. boots back up to either A. black screen saying press any key to boot to my install disk. B. if I take it out just a white curser. also I read it may be because I had the flash drive in while I was trying to boot so I removed it as well, same result. any input would be much appreciated.
Boot Camp- Windows installation boots to black screen with blinking cursor.
Similar Messages
-
My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.
Same issue here too. I will try reinstalling the firmware update. This has happend to me twice. The only way to correct the issue was to reboot.
Thanks! -
Black screen with no cursor after installing Windows 7 through Boot Camp on Retina MBP
Hey all.
So, I have a Retina Macbook Pro (15", late 2013). A couple weeks ago I tried to install Windows 7 on it through Boot Camp.
After some struggles with trying to repair my disk with Disk Utility and having to recover the system etc, I finally managed to actually install Windows 7. However, after the installing was ready, when Windows was supposed to boot, it just gave me a black screen with no cursor. I really had no idea what to do there, I tried to do some research from google but only found answers regarding a black screen with a cursor DURING the installation. However, I managed to launch Windows in safe mode. I deleted graphics drivers that bootcamp assistant had installed, and then it worked and I got to boot Windows succesfully.
However, as probably all of you know, you can't do much without those drivers. Games, videos, overall performance of the system is kinda horrible.
After that, I wiped the whole system, Mac and Windows, and reinstalled Mac. During the Windows installation I was running on Mavericks, now I've got Yosemite. I might try installing Windows again next week, does anyone have any clue why the black screen happened? What could I have done wrong? And the most important question in my mind, in case that happens, is there any way to install the graphics drivers manually from somewhere? After I uninstalled 'em earlier, I tried to find them manually, but couldn't find any.
Thanks!Yes, that's exactly what was the problem in the first place, I had a USB3 device. Switched to USB2 device and the installation progress started flawlessly.
The later part I didn't quite get. What are those installation methods, how could they cause the problem there? I had no problems during the installation, but after installation when launching Windows I had the black screen, and that I suppose was GPU drivers problem if I'm not totally wrong? I could hear the basic Windows system beeps etc when I tried clicking everywhere (had no cursor either, just clicking randomly), so the system was running there, but just didn't draw the picture at all. -
My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Serial Number (system): 7302300GANE
Hardware UUID: B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State: EnabledEDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else! -
I took my Early 2011 MacBook Pro into the local apple store and they ran their GPU test, and my Mac actually passed it. The Apple employee then ran a hardware test and the logic board, battery, and optical drive showed problems. The Genius told me about their flat rate $310 repair deal, and I am going to take advantage of it...
Today when I am able to boot up my mac it loads very slow (showing a beachball during start up) and then the window we get when pressing Command R shows up asking me to press enter for English, and then after that it shows options like Disk Utility, Restore from Time Machine backup, Reinstall OS X, and Get online help options...
I erased my drive (Crucial SSD) and restored from Time Machine backup, and I am still having this issue... Please help.Kappy hi, thanks again. I wiped the drive, reinstalled OS X, and transferred from Time Machine backup... Seems to be working better somewhat. I will just have to pay for flat rate repair for Apple to fix everything wrong, and hopefully it will perform like new... Again thank you.
-
Hi,
Recently my dad's Windows 7 (Ultimate 64-bit) on his Mac Pro has stopped working. It gets stuck at a black screen with a blinking cursor. I've waited at least five minutes and it doesn't do anything, I have to power it off.
However it starts up perfectly fine and intact in Parallels desktop. If I insert the original installation DVD and boot from the Disc that says 'Windows' it will boot into the partition and work fine, unless I press a key to boot from the DVD.
I find both these things to be strange. The partition is backed up, which is fine, but I'd rather not have to re-install it if possible.
I have booted from the DVD and tried to repair the disk. It said it found a problem with something related to startup and that it needed to restart to repair it. I clicked yes, and then held alt/opt and (I think wrongly) booted back into the disc rather than the Windows partition. However it now says that it can't detect any problems.
In the repair my computer section when booting from the DVD, it detects the OS as Windows Vista Business. I followed these steps I found online:
Fixed! Peroblem was I think using OEM, which Bootcamp advise against using... they advise to use retail only. Fixed like this:
1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
*Press ENTER after each command.*
*Restart your computer.*
Done. Rockin'
FixMbr was successful, as was FixBoot. However RebuildBcd reported that it found no Windows installations.
Does anyone know what could be wrong here? I should note that recently I removed the drive Windows 7 is installed on and put it back in. Also Windows Updates probably have been done by my dad. Not sure if they could be the problem.Cult, welcome to the forum.
It sounds like you have a failing power supply unit (PSU). This will cause the symptoms that you describe. If the computer isn't getting enough power, it can cause numerous problems. You can try disconnecting any unnecessary components to see if it will boot. Here is a guide to help you troubleshoot the problem.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Black screen with blinking cursor while trying to boot from Win Install CD
I'm running Leopard with all updates on a brand new MacBook Pro.
I initially had no problems with Boot Camp - the Assistant partitioned my drive, I put in my Vista DVD and hit Start Installation and the MacBook rebooted from the Windows DVD just fine. I made a mistake, however, when I used my retail Leopard disc instead of the install DVDs from my new MacBook, so the wrong drivers got installed and things were a mess. It wasn't painful setting up Boot Camp, so I decided I'd just go back into Leopard, wipe the Windows partition, and retry.
The Boot Camp Assistant had no problem merging the boot camp partition back with the main one, then making a new boot camp partition (I'm not sure if this was necessary, but I did it). I then put in my Vista DVD again and hit Start Installation. The MacBook rebooted, but not into the DVD - it just sat at the black screen with the blinking cursor in the top left corner. After 10 minutes of nothing, I held the power button to shut the MacBook down and tried again - same thing. I booted back into Leopard and tried Start Installation again - same problem. I remerged the boot camp partition, restarted the MacBook, then made a new partition and tried the Vista DVD - again just that blinking cursor.
What went wrong and how do I fix it?Try resetting the PMU. See link here.
http://discussions.apple.com/thread.jspa?messageID=7188736
I tried everything mentioned previously (in this thread AND the link thread) and the PMU reset (shutdown, pull out power cord and other cords, wait 30 seconds, plug back in and restart) let me continue to install windows after partitioning the HD. Good luck! -
Can anyone help read my crash report? My 2010 macbook pro keeps going black screen with looped sound
I've had this laptop since 2010 and it's been pretty good up until about two months ago when it would just randomly crash. The screen would go black and if there was sound going on, the sound would just loop on that single second like a broken record. The only way to get it out of that is to hold the power button and then turn it back on. When these crashes would happen in the beginning it would only be when I had Adobe Photoshop running, now it just happens whenever I'm simply using the internet browsing through Tumblr, Youtube, and Facebook.
Every time I turn my computer back on I get a crash report like this:
Interval Since Last Panic Report: 171569 sec
Panics Since Last Report: 11
Anonymous UUID: 8FD3B893-CF9A-463D-BF89-1278EB5F8177
Tue May 13 14:29:41 2014
panic(cpu 0 caller 0x9f5c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa686e000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x7c3aa188 : 0x21b837 (0x5dd7fc 0x7c3aa1bc 0x223ce1 0x0)
0x7c3aa1d8 : 0x9f5c9b (0xc0b28c 0xc7b800 0xc19e60 0x0)
0x7c3aa278 : 0xb10608 (0xdde7804 0xf00a004 0x100 0xcd52b6)
0x7c3aa2c8 : 0xb07601 (0xf00a004 0x100 0x7c3aa2f8 0x9e5778)
0x7c3aa2f8 : 0x16d79a6 (0xf00a004 0x100 0x438004ee 0x7c3aa308)
0x7c3aa438 : 0xb2f2b5 (0xf00a004 0xf00d004 0x0 0x0)
0x7c3aa478 : 0x9fee7c (0xf00a004 0xf00d004 0x0 0x0)
0x7c3aa518 : 0x9fb55b (0x0 0x9 0x0 0x0)
0x7c3aa6c8 : 0x9fd58f (0x0 0x600d600d 0x702b 0x7c3aa6f8)
0x7c3aa798 : 0xcc0eae (0xc1d00042 0xbfef0033 0xbfef0034 0x857c)
0x7c3aa808 : 0xcd0734 (0x1d30c400 0x1dffac00 0x8 0x3)
0x7c3aa828 : 0xcf5322 (0x1dffac00 0xb 0x7c3aa848 0x2345f4)
0x7c3aa858 : 0xcf5b3d (0xf205000 0x0 0x7c3aa87c 0x0)
0x7c3aa888 : 0xcd5d79 (0xf205000 0xa47ea080 0x0 0x35)
0x7c3aa8d8 : 0xc97d0c (0x6d2c2000 0x0 0x0 0x3)
0x7c3aa948 : 0xc9740f (0x6d2c2000 0x0 0x2 0x3)
0x7c3aa978 : 0xc8d05f (0x6d2c2000 0x0 0x2 0x6d2bf000)
0x7c3aaab8 : 0xcc65d8 (0x6d2bf000 0x1 0x7c3aabcc 0x7c3aabc8)
0x7c3aab68 : 0xc88fe1 (0x6d2bf000 0x1 0x7c3aabcc 0x7c3aabc8)
0x7c3aabe8 : 0x56da06 (0x6d2bf000 0x0 0x7c3aae3c 0x7c3aac74)
0x7c3aac38 : 0x56e2a5 (0xd17720 0x6d2bf000 0x1d699d88 0x1)
0x7c3aac88 : 0x56eb59 (0x6d2bf000 0x10 0x7c3aacd0 0x0)
0x7c3aada8 : 0x286638 (0x6d2bf000 0x10 0x1d699d88 0x1)
0x7c3abe58 : 0x21dbe5 (0x1d699d60 0x1c8325a0 0x1fd7e8 0x5d43)
0x7c3abe98 : 0x210a86 (0x1d699d00 0x0 0xf0e9d90 0xf278700)
0x7c3abef8 : 0x216f84 (0x1d699d00 0x0 0x0 0x0)
0x7c3abf78 : 0x295c57 (0xdfc8248 0x0 0x0 0x0)
0x7c3abfc8 : 0x2a256d (0xdfc8244 0x1 0x10 0x1c83f120)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.4.0)@0x15a1000->0x19b5fff
dependency: com.apple.NVDAResman(6.4.0)@0x98f000
com.apple.GeForce(6.4.0)@0xc7d000->0xd33fff
dependency: com.apple.NVDAResman(6.4.0)@0x98f000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x982000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x949000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x960000
com.apple.NVDAResman(6.4.0)@0x98f000->0xc7cfff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x949000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x982000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x960000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 10177875731756
unloaded kexts:
com.apple.filesystems.msdosfs 1.6.3 (addr 0x83407000, size 0x53248) - last unloaded 3154654100337
loaded kexts:
com.vara.driver.VaraAudio 1.0.3
com.Cycling74.driver.Soundflower 1.6.2
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 1594858749190
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AudioAUUC 1.57
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelHDGraphics 6.4.0
com.apple.driver.AppleIntelHDGraphicsFB 6.4.0
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.GeForce 6.4.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 6.4.0
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.NVDAResman 6.4.0
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK5055GSXF, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Deskjet F4400 series, 0x03f0 (Hewlett Packard), 0x7711, 0xfa140000 / 6
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 8
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: My Passport 0748, 0x1058 (Western Digital Technologies, Inc.), 0x0748, 0xfd130000 / 5
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
I don't know if this is the same crash report but I saved another one too:
Interval Since Last Panic Report: 149680 sec
Panics Since Last Report: 6
Anonymous UUID: 8FD3B893-CF9A-463D-BF89-1278EB5F8177
Sun May 11 21:05:02 2014
panic(cpu 0 caller 0x9f5c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa684e000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x7c2da188 : 0x21b837 (0x5dd7fc 0x7c2da1bc 0x223ce1 0x0)
0x7c2da1d8 : 0x9f5c9b (0xc0b28c 0xc7b800 0xc19e60 0x0)
0x7c2da278 : 0xb10608 (0xedbf804 0xe4ad004 0x100 0xcd52b6)
0x7c2da2c8 : 0xb07601 (0xe4ad004 0x100 0x7c2da2f8 0x9e5778)
0x7c2da2f8 : 0x16d79a6 (0xe4ad004 0x100 0x438004ee 0x7c2da308)
0x7c2da438 : 0xb2f2b5 (0xe4ad004 0xe57b004 0x0 0x0)
0x7c2da478 : 0x9fee7c (0xe4ad004 0xe57b004 0x0 0x0)
0x7c2da518 : 0x9fb55b (0x0 0x9 0x0 0x0)
0x7c2da6c8 : 0x9fd58f (0x0 0x600d600d 0x702b 0x7c2da6f8)
0x7c2da798 : 0xcc0eae (0xc1d00041 0xbfef0033 0xbfef0034 0x857c)
0x7c2da808 : 0xcd0734 (0x1dc5c400 0x1d96b580 0x8 0x1)
0x7c2da828 : 0xcf5322 (0x1d96b580 0xb 0x7c2da848 0x2345f4)
0x7c2da858 : 0xcf5b3d (0xf206000 0x0 0x7c2da87c 0x0)
0x7c2da888 : 0xcd5d79 (0xf206000 0x988f6080 0x0 0x0)
0x7c2da8d8 : 0xc97d0c (0x6d2ad000 0x0 0x0 0x3)
0x7c2da948 : 0xc9740f (0x6d2ad000 0x0 0x2 0x3)
0x7c2da978 : 0xc8d05f (0x6d2ad000 0x0 0x2 0x6d257000)
0x7c2daab8 : 0xcc65d8 (0x6d257000 0x1 0x7c2dabcc 0x7c2dabc8)
0x7c2dab68 : 0xc88fe1 (0x6d257000 0x1 0x7c2dabcc 0x7c2dabc8)
0x7c2dabe8 : 0x56da06 (0x6d257000 0x0 0x7c2dae3c 0x7c2dac74)
0x7c2dac38 : 0x56e2a5 (0xd17720 0x6d257000 0x1e079988 0x1)
0x7c2dac88 : 0x56eb59 (0x6d257000 0x10 0x7c2dacd0 0x0)
0x7c2dada8 : 0x286638 (0x6d257000 0x10 0x1e079988 0x1)
0x7c2dbe58 : 0x21dbe5 (0x1e079960 0x1e3685a0 0x1ed788 0x5d43)
0x7c2dbe98 : 0x210a86 (0x1e079900 0x0 0xddc1000 0xf2949d0)
0x7c2dbef8 : 0x216f84 (0x1e079900 0x0 0x0 0x0)
0x7c2dbf78 : 0x295c57 (0xdf767e8 0x0 0x0 0x0)
0x7c2dbfc8 : 0x2a256d (0xdf767e4 0x0 0x10 0xf3ab3c0)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.4.0)@0x15a1000->0x19b5fff
dependency: com.apple.NVDAResman(6.4.0)@0x98f000
com.apple.GeForce(6.4.0)@0xc7d000->0xd33fff
dependency: com.apple.NVDAResman(6.4.0)@0x98f000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x982000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x949000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x960000
com.apple.NVDAResman(6.4.0)@0x98f000->0xc7cfff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x949000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x982000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x960000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 26194070830465
unloaded kexts:
com.apple.driver.AppleWWANSupport 2.0.4b0 (addr 0x1432000, size 0x12288) - last unloaded 20460721782172
loaded kexts:
com.vara.driver.VaraAudio 1.0.3
com.Cycling74.driver.Soundflower 1.6.2
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 20385461271440
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleIntelHDGraphics 6.4.0
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelHDGraphicsFB 6.4.0
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.GeForce 6.4.0
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 6.4.0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.NVDAResman 6.4.0
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK5055GSXF, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 8
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Dell USB Optical Mouse, 0x413c (Dell Inc.), 0x3012, 0xfd130000 / 5
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3First, uninstall the third-party software that installed these extensions:
com.vara.driver.VaraAudio 1.0.3
com.Cycling74.driver.Soundflower 1.6.2
com.pctools.iantivirus.kfs 1.0.1
Remove the Dell mouse and use the original mouse.
See if the above help. If they don't:
The problem is likely due to the discreet GPU failing. Download gfxCardStatus 2.3 and use it to disable the GPU. This is a temporary workaround until you get your motherboard replaced.
MacBook Pro (15-inch, Mid 2010)- Intermittent black screen or loss of video -
So I have an early 2011 MacBook pro, I believe it shipped with snow leopard originally, as I purchased and upgraded to Lion fairly early on. I am trying to make a partition right now and have it run snow leopard so I can use programs that have PowerPC.
I should note, I replaced both the RAM and the harddrive in my Macbook pro. I changed from 4 GB of ram (that came shipped) to 8 GB of ram from a 3rd party, that I installed on my own months ago, have registered in the computer and have been working fine for quite some time now.
Also I should note I replaced my harddrive. I went from what ever the standard 500 GB harddrive that shipped with 15 inch early 2011 MB pro's. I now have a 3rd party SSD that's 240GB's that I also installed on my own, (at the same time as the RAM---Black friday items) The harddrive has been working just fine since then.
In installing the harddrive I borrowed a friends external harddrive and used a program called carbon copy cloner to get everything over to the SSD.
Now here is my issue. I have ordered the Snow Leopard (10.6.3) install disks from apple, I have created a partition on my SSD for snow leopard, but when I try to select the install disc for snow leopard at boot I get three beeps.
I know this issue has been posted elsewere but it said answered and the answer is no longer available. I also am unsure if any of the RAM or Harddrive swapping could have been causing the issue. I have the old harddrive and RAM still, but unfortunatley have no external harddrive anymore or money to afford one.
Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks).
Let me know If there is anything I can do. I'm a now broke college student so i'd like to spend as little $$$$ as possible
*PS I should also note the DVD drive is working fine, it reads the disk, the disk is brand new, it plays DVD's fine and has never had any issues in the years i've used it for similar tasks*
sorry for the long drawn out post, I just wanted to include as much as possible from what I've seen other people have issues withBrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP. -
Windows 7 64-bit black screen and blinking cursor for ages before boot
Help!
I'm having the black screen with blinking cursor whenever I try and boot up Windows 7 Ultimate 64-bit thru Bootcamp on my MacBook Pro. If i let it just sit there for maybe 2 or 3 minutes, it then goes to the Windows Boot Manager screen and allows me to click on Windows 7 and the it boots perfect. I've tried installing it twice, same thing. No problem booting OS X Snow Leo 10.6.3. Got the right NVidia drivers installed, makes no difference. Have Paragon NTFS installed so I can get thru to NTFS partition from OS X. I badly need Windows too and don't wanna slow it down by running it in Parallels or VMWare Fusion. A little help?
Thanks a lot!Solved! Here's what worked for me, it's located at:
http://discussions.apple.com/thread.jspa?messageID=11567814#11567814
(scroll further down, Option 3, you'll see one or two others had success with it too)
Message was edited by: rapture_elk -
I can't get my apple magic mouse to work on my boot camp,running Windows 7 Ultimate on my early 2011 macbook pro with latest Marveric OS........ It works perfectly on the Apple ,
Not sure if this will help anyone, but I had trouble installing on 10.8.
I then found this particular support page:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4231205#N228
Be patient with the download, it takes some time ... When it has downloaded, follow the install instructions. It works well.
I use the printer through usb but my wife uses wireless from her PC laptop.
Andre Francis -
GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .
GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .
any
my problem looks like this
http://www.youtube.com/watch?v=PGzgS57THMo
gta 4 steam !If GTA IV believes the system is under specification even though the computer is powerful enough to run the game with higher settings, the following will fix this problem.
This will work if your problem looks like this: "resource usage 230/60" and you can't change any other setting
Just follow the steps:
Step 1: Create a text file named ‘commandline.txt’ (without the " ")
Step 2: Put the following statement inside it:
i5 users: -availablevidmem 18.0 (with the -)
i7 users: -availablevidmem 22.0 (with the -)
Step 3: Open the main GTAIV folder (C/ program files (86)/ rockstar games/ GTA IV) and copy the commandline.txt file into it.
Step 4: locate the file "GTAIV.exe" (in GTA main folder)
Right click the file and select Properties
Under the shortcut tab, you will see an area that says Target
Modify the Target adding the command line after the last quotation mark (just add the statement you added in commandline.txt)
(remember, i5 users: -availablevidmem 18.0 / i7 users: -availablevidmem 22.0)
It should look something like this:
Make sure to add space between " and -"
I hope This helps, although late cx -
Boot camp process. MacBook Pro cannot fid a bootable disk?
boot camp process. MacBook Pro cannot fid a bootable disk?
Welcome to the Apple Support Communities
Press Option key while your Mac is starting and choose your Windows installation disc or drive to start the installation -
I have a early 2011 MacBook Pro upgraded to mavericks and windows 7 install cd what do I need to install bootcamp properly? I have the bootcamp assistant in my utilities folder but do I need an older version it's the 5. Something from mavericks and which drivers do I need my my computer?
Boot Camp Assistant is already installed.
Boot Camp 5.1- Frequently asked questions
Mac Basics- Using Windows on your Mac with Boot Camp
Boot Camp- Frequently asked questions about installing Windows 8
Boot Camp- Installing Windows 7 Frequently Asked Questions -
Airplay mirroring on early 2011 macbook pro not mirroring
First, here's what I have:
Early 2011 macbook pro (identifier 8,3) with 2.2 Intel Core i7 processor connected over Wifi on 2.4 Ghz channel.
OSX 10.8 Mountain Lion
Apple TV 3 (fully up to date)
The stats I've read say airplay mirroring should work fine. I can connect both machines just fine. I can stream movies just fine. I can send music just fine. I just cannot mirror my desktop. I have the icons, a connection is made, but all that shows is a blank screen. I've adjusted the resolutions with no luck. I've shut down and rebooted both machines with no luck...
Any solutions or do I have to count my losses with Apple Airplay and spend more money on a 3rd party alternative (AirParrot)?Hi eoinodonnell,
The problem was resolved, but I have the worst answer... it just started working, and has remained reliable since. I never found out exactly what fixed it, but I would try these things:
1) Try a factory reset on the Apple TV, and make sure your Macbook pro has all the latest updates.
2) Try to repair disk permissions (better to do it from disk utility from boot menu) and reboot your macbook.
3) Backup your files and do a fresh install of OSX.
I know I performed all these tasks, and possibly more, but something along the way did fix the problem.
I hope something here works! If so, please let me know what did it.
Maybe you are looking for
-
HP LaserJet 3030 printing gets "is not connected" message
When I send data to print, the printer appears to power off then restart with "Scanner Bulb warming up" message on the printer. Then I get a message on my computer that the printer is not connected. This occurs with either a USB cable attached direc
-
Aperture Preferences: can't access under Leopard
Hi, I've recently upgraded to Leopard and Aperture 1.5.6 appears to be working fine for me after a brief test (nothing exhaustive as yet). However, if I try to access the Preferences window from the Aperture application menu, Aperture dies 100% of th
-
Aperture will not open- HELP!!!
Can anyone help me? Aperture will not open and I'm worried that I will loose over 35000 photos. When I try to open Aperture this is the message I get: There was an error opening the database for the library "/Users/philcammarata/Pictures/Aperture L
-
Jdeveloper 11 and/or toplink-jpa problem
Hello, We have a big problem with toplink-jpa or jdev 11. I tried something very similar to the jdev/jpa tutorial (http://download-uk.oracle.com/otn_hosted_doc/jdeveloper/11/demos/JPA/JPA_Demo.html), only adapted to our db. I've been trying to solve
-
Can anyone share their experience with using the BC forum module? Does it work and would you recommend it? Are there any known problems or issues with BC Forums that I should be aware of? Any honest input would be appreciated. Thank you!